diff options
Diffstat (limited to 'include')
67 files changed, 4385 insertions, 392 deletions
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index 47c18e7e86..029b7f9eeb 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -34,6 +34,32 @@ static inline void sync(void) } /* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + +/* * Generic virtual read/write. Note that we don't support half-word * read/writes. We define __arch_*[bl] here, and leave __arch_*w * to the architecture specific code. diff --git a/include/asm-avr32/arch-at32ap700x/chip-features.h b/include/asm-avr32/arch-at32ap700x/chip-features.h new file mode 100644 index 0000000000..29b1fd663d --- /dev/null +++ b/include/asm-avr32/arch-at32ap700x/chip-features.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2007 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_ARCH_CHIP_FEATURES_H__ +#define __ASM_AVR32_ARCH_CHIP_FEATURES_H__ + +/* Currently, all the AP700x chips have these */ +#define AT32AP700x_CHIP_HAS_USART +#define AT32AP700x_CHIP_HAS_MMCI + +/* Only AP7000 has ethernet interface */ +#ifdef CONFIG_AT32AP7000 +#define AT32AP700x_CHIP_HAS_MACB +#endif + +#endif /* __ASM_AVR32_ARCH_CHIP_FEATURES_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h index 7e20d97b7f..ea84c0874c 100644 --- a/include/asm-avr32/arch-at32ap7000/clk.h +++ b/include/asm-avr32/arch-at32ap700x/clk.h @@ -22,6 +22,8 @@ #ifndef __ASM_AVR32_ARCH_CLK_H__ #define __ASM_AVR32_ARCH_CLK_H__ +#include <asm/arch/chip-features.h> + #ifdef CONFIG_PLL #define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL) #else @@ -50,10 +52,13 @@ static inline unsigned long get_sdram_clk_rate(void) { return get_hsb_clk_rate(); } +#ifdef AT32AP700x_CHIP_HAS_USART static inline unsigned long get_usart_clk_rate(unsigned int dev_id) { return get_pba_clk_rate(); } +#endif +#ifdef AT32AP700x_CHIP_HAS_USART static inline unsigned long get_macb_pclk_rate(unsigned int dev_id) { return get_pbb_clk_rate(); @@ -62,9 +67,12 @@ static inline unsigned long get_macb_hclk_rate(unsigned int dev_id) { return get_hsb_clk_rate(); } +#endif +#ifdef AT32AP700x_CHIP_HAS_MMCI static inline unsigned long get_mci_clk_rate(void) { return get_pbb_clk_rate(); } +#endif #endif /* __ASM_AVR32_ARCH_CLK_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/gpio.h b/include/asm-avr32/arch-at32ap700x/gpio.h index e4812d4d08..b10a3e4f86 100644 --- a/include/asm-avr32/arch-at32ap7000/gpio.h +++ b/include/asm-avr32/arch-at32ap700x/gpio.h @@ -22,6 +22,7 @@ #ifndef __ASM_AVR32_ARCH_GPIO_H__ #define __ASM_AVR32_ARCH_GPIO_H__ +#include <asm/arch/chip-features.h> #include <asm/arch/memory-map.h> #define NR_GPIO_CONTROLLERS 5 @@ -201,12 +202,19 @@ void gpio_select_periph_A(unsigned int pin, int use_pullup); void gpio_select_periph_B(unsigned int pin, int use_pullup); void gpio_enable_ebi(void); + +#ifdef AT32AP700x_CHIP_HAS_USART void gpio_enable_usart0(void); void gpio_enable_usart1(void); void gpio_enable_usart2(void); void gpio_enable_usart3(void); +#endif +#ifdef AT32AP700x_CHIP_HAS_MACB void gpio_enable_macb0(void); void gpio_enable_macb1(void); +#endif +#ifdef AT32AP700x_CHIP_HAS_MMCI void gpio_enable_mmci(void); +#endif #endif /* __ASM_AVR32_ARCH_GPIO_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/hmatrix2.h b/include/asm-avr32/arch-at32ap700x/hmatrix2.h index b0e787a92f..b0e787a92f 100644 --- a/include/asm-avr32/arch-at32ap7000/hmatrix2.h +++ b/include/asm-avr32/arch-at32ap700x/hmatrix2.h diff --git a/include/asm-avr32/arch-at32ap7000/memory-map.h b/include/asm-avr32/arch-at32ap700x/memory-map.h index 5513e88e7b..5513e88e7b 100644 --- a/include/asm-avr32/arch-at32ap7000/memory-map.h +++ b/include/asm-avr32/arch-at32ap700x/memory-map.h diff --git a/include/asm-avr32/arch-at32ap7000/mmc.h b/include/asm-avr32/arch-at32ap700x/mmc.h index fcfbbb3c6c..fcfbbb3c6c 100644 --- a/include/asm-avr32/arch-at32ap7000/mmc.h +++ b/include/asm-avr32/arch-at32ap700x/mmc.h diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h index 3c0d569233..ba14674cf7 100644 --- a/include/asm-avr32/io.h +++ b/include/asm-avr32/io.h @@ -93,4 +93,36 @@ static inline void sync(void) { } +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + * + * This implementation works for memory below 512MiB (flash, etc.) as + * well as above 3.5GiB (internal peripherals.) + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (1 << 7) +#define MAP_WRBACK (MAP_WRCOMBINE | (1 << 9)) +#define MAP_WRTHROUGH (MAP_WRBACK | (1 << 0)) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + if (flags == MAP_WRBACK) + return (void *)P1SEGADDR(paddr); + else + return (void *)P2SEGADDR(paddr); +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long len) +{ + +} + #endif /* __ASM_AVR32_IO_H */ diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index 332d2c6437..512e13d1ca 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -41,6 +41,32 @@ static inline void sync(void) } /* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + +/* * These are for ISA/PCI shared memory _only_ and should never be used * on any other type of memory, including Zorro memory. They are meant to * access the bus in the bus byte order which is little-endian!. diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h index e64d788fa7..db4f442817 100644 --- a/include/asm-i386/io.h +++ b/include/asm-i386/io.h @@ -205,4 +205,30 @@ static inline void sync(void) { } +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + #endif diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h index e14a581dc1..91d759219d 100644 --- a/include/asm-m68k/io.h +++ b/include/asm-m68k/io.h @@ -28,6 +28,20 @@ #include <asm/byteorder.h> +/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates + * two accesses to memory, which may be undesirable for some devices. + */ +#define __raw_readb(addr) \ + ({ u8 __v = (*(volatile u8 *) (addr)); __v; }) +#define __raw_readw(addr) \ + ({ u16 __v = (*(volatile u16 *) (addr)); __v; }) +#define __raw_readl(addr) \ + ({ u32 __v = (*(volatile u32 *) (addr)); __v; }) + +#define __raw_writeb(addr,b) (void)((*(volatile u8 *) (addr)) = (b)) +#define __raw_writew(addr,w) (void)((*(volatile u16 *) (addr)) = (w)) +#define __raw_writel(addr,l) (void)((*(volatile u32 *) (addr)) = (l)) + #define readb(addr) in_8((volatile u8 *)(addr)) #define writeb(b,addr) out_8((volatile u8 *)(addr), (b)) #if !defined(__BIG_ENDIAN) @@ -218,4 +232,31 @@ static inline void sync(void) * compatibility (CFI driver) */ } + +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + #endif /* __ASM_M68K_IO_H__ */ diff --git a/include/asm-microblaze/io.h b/include/asm-microblaze/io.h index 1c77ade4f1..90d18428ad 100644 --- a/include/asm-microblaze/io.h +++ b/include/asm-microblaze/io.h @@ -129,4 +129,30 @@ static inline void sync(void) { } +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + #endif /* __MICROBLAZE_IO_H__ */ diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index 1e060f7c31..e27d1f159d 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -465,4 +465,30 @@ static inline void sync(void) { } +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + #endif /* _ASM_IO_H */ diff --git a/include/asm-nios/io.h b/include/asm-nios/io.h index d77695abb9..6fc339fb01 100644 --- a/include/asm-nios/io.h +++ b/include/asm-nios/io.h @@ -23,6 +23,14 @@ #ifndef __ASM_NIOS_IO_H_ #define __ASM_NIOS_IO_H_ +#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) + +#define __raw_readb(a) (*(volatile unsigned char *)(a)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_readl(a) (*(volatile unsigned int *)(a)) + #define readb(addr)\ ({unsigned char val;\ asm volatile( " pfxio 0 \n"\ @@ -101,4 +109,30 @@ static inline void sync(void) { } +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + #endif /* __ASM_NIOS_IO_H_ */ diff --git a/include/asm-nios2/io.h b/include/asm-nios2/io.h index 5bb5322952..a52b95cf23 100644 --- a/include/asm-nios2/io.h +++ b/include/asm-nios2/io.h @@ -29,10 +29,44 @@ static inline void sync(void) __asm__ __volatile__ ("sync" : : : "memory"); } +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + extern unsigned char inb (unsigned char *port); extern unsigned short inw (unsigned short *port); extern unsigned inl (unsigned port); +#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) + +#define __raw_readb(a) (*(volatile unsigned char *)(a)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_readl(a) (*(volatile unsigned int *)(a)) + #define readb(addr)\ ({unsigned char val;\ asm volatile( "ldbio %0, 0(%1)" :"=r"(val) : "r" (addr)); val;}) diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 496fc72da3..d769d70120 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -720,11 +720,10 @@ typedef struct ccsr_tsec { } ccsr_tsec_t; /* - * PIC Registers(0x2_6000-0x4_0000-0x8_0000) + * PIC Registers(0x4_0000-0x8_0000) */ typedef struct ccsr_pic { - char res0[106496]; /* 0x26000-0x40000 */ - char res1[64]; + char res1[64]; /* 0x40000 */ uint ipidr0; /* 0x40040 - Interprocessor Interrupt Dispatch Register 0 */ char res2[12]; uint ipidr1; /* 0x40050 - Interprocessor Interrupt Dispatch Register 1 */ @@ -1619,25 +1618,25 @@ typedef struct ccsr_gur { #define PORDEVSR_PCI (0x00800000) /* PCI Mode */ -typedef struct immap { - ccsr_local_ecm_t im_local_ecm; - ccsr_ddr_t im_ddr; - ccsr_i2c_t im_i2c; - ccsr_duart_t im_duart; - ccsr_lbc_t im_lbc; - ccsr_pcix_t im_pcix; - ccsr_pcix_t im_pcix2; - char reserved[90112]; - ccsr_l2cache_t im_l2cache; - ccsr_dma_t im_dma; - ccsr_tsec_t im_tsec1; - ccsr_tsec_t im_tsec2; - ccsr_pic_t im_pic; - ccsr_cpm_t im_cpm; - ccsr_rio_t im_rio; - ccsr_gur_t im_gur; -} immap_t; - -extern immap_t *immr; +#define CFG_MPC85xx_GUTS_OFFSET (0xE0000) +#define CFG_MPC85xx_GUTS_ADDR (CFG_IMMR + CFG_MPC85xx_GUTS_OFFSET) +#define CFG_MPC85xx_ECM_OFFSET (0x0000) +#define CFG_MPC85xx_ECM_ADDR (CFG_IMMR + CFG_MPC85xx_ECM_OFFSET) +#define CFG_MPC85xx_DDR_OFFSET (0x2000) +#define CFG_MPC85xx_DDR_ADDR (CFG_IMMR + CFG_MPC85xx_DDR_OFFSET) +#define CFG_MPC85xx_LBC_OFFSET (0x5000) +#define CFG_MPC85xx_LBC_ADDR (CFG_IMMR + CFG_MPC85xx_LBC_OFFSET) +#define CFG_MPC85xx_PCIX_OFFSET (0x8000) +#define CFG_MPC85xx_PCIX_ADDR (CFG_IMMR + CFG_MPC85xx_PCIX_OFFSET) +#define CFG_MPC85xx_PCIX2_OFFSET (0x9000) +#define CFG_MPC85xx_PCIX2_ADDR (CFG_IMMR + CFG_MPC85xx_PCIX2_OFFSET) +#define CFG_MPC85xx_L2_OFFSET (0x20000) +#define CFG_MPC85xx_L2_ADDR (CFG_IMMR + CFG_MPC85xx_L2_OFFSET) +#define CFG_MPC85xx_DMA_OFFSET (0x21000) +#define CFG_MPC85xx_DMA_ADDR (CFG_IMMR + CFG_MPC85xx_DMA_OFFSET) +#define CFG_MPC85xx_PIC_OFFSET (0x40000) +#define CFG_MPC85xx_PIC_ADDR (CFG_IMMR + CFG_MPC85xx_PIC_OFFSET) +#define CFG_MPC85xx_CPM_OFFSET (0x80000) +#define CFG_MPC85xx_CPM_ADDR (CFG_IMMR + CFG_MPC85xx_CPM_OFFSET) #endif /*__IMMAP_85xx__*/ diff --git a/include/asm-ppc/immap_fsl_pci.h b/include/asm-ppc/immap_fsl_pci.h index bd732b6688..6715064c94 100644 --- a/include/asm-ppc/immap_fsl_pci.h +++ b/include/asm-ppc/immap_fsl_pci.h @@ -144,7 +144,9 @@ typedef struct ccsr_pci { u32 perr_cap1; /* 0xe2c - PCIE Error Capture Register 1 */ u32 perr_cap2; /* 0xe30 - PCIE Error Capture Register 2 */ u32 perr_cap3; /* 0xe34 - PCIE Error Capture Register 3 */ - char res23[456]; /* (- #x1000 #xe38) 456 */ + char res23[200]; + u32 pdb_stat; /* 0xf00 - PCIE Debug Status */ + char res24[252]; } ccsr_fsl_pci_t; #endif /*__IMMAP_fsl_pci__*/ diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index 11dfa1c57b..91c9c1e4c6 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -121,13 +121,43 @@ static inline void isync(void) #define iobarrier_w() eieio() /* + * Non ordered and non-swapping "raw" accessors + */ +#define __iomem +#define PCI_FIX_ADDR(addr) (addr) + +static inline unsigned char __raw_readb(const volatile void __iomem *addr) +{ + return *(volatile unsigned char *)PCI_FIX_ADDR(addr); +} +static inline unsigned short __raw_readw(const volatile void __iomem *addr) +{ + return *(volatile unsigned short *)PCI_FIX_ADDR(addr); +} +static inline unsigned int __raw_readl(const volatile void __iomem *addr) +{ + return *(volatile unsigned int *)PCI_FIX_ADDR(addr); +} +static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) +{ + *(volatile unsigned char *)PCI_FIX_ADDR(addr) = v; +} +static inline void __raw_writew(unsigned short v, volatile void __iomem *addr) +{ + *(volatile unsigned short *)PCI_FIX_ADDR(addr) = v; +} +static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) +{ + *(volatile unsigned int *)PCI_FIX_ADDR(addr) = v; +} + +/* * 8, 16 and 32 bit, big and little endian I/O operations, with barrier. * * Read operations have additional twi & isync to make sure the read * is actually performed (i.e. the data has come back) before we start * executing any following instructions. */ -#define __iomem extern inline int in_8(const volatile unsigned char __iomem *addr) { int ret; @@ -208,4 +238,30 @@ extern inline void out_be32(volatile unsigned __iomem *addr, int val) __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); } +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + #endif diff --git a/include/asm-ppc/iopin_85xx.h b/include/asm-ppc/iopin_85xx.h index f854df633a..daddb554d4 100644 --- a/include/asm-ppc/iopin_85xx.h +++ b/include/asm-ppc/iopin_85xx.h @@ -23,121 +23,121 @@ typedef struct { extern __inline__ void iopin_set_high (iopin_t * iopin) { - volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata; + volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata; datp[iopin->port * 8] |= (1 << (31 - iopin->pin)); } extern __inline__ void iopin_set_low (iopin_t * iopin) { - volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata; + volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata; datp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); } extern __inline__ uint iopin_is_high (iopin_t * iopin) { - volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata; + volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata; return (datp[iopin->port * 8] >> (31 - iopin->pin)) & 1; } extern __inline__ uint iopin_is_low (iopin_t * iopin) { - volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata; + volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata; return ((datp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; } extern __inline__ void iopin_set_out (iopin_t * iopin) { - volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira; + volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira; dirp[iopin->port * 8] |= (1 << (31 - iopin->pin)); } extern __inline__ void iopin_set_in (iopin_t * iopin) { - volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira; + volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira; dirp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); } extern __inline__ uint iopin_is_out (iopin_t * iopin) { - volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira; + volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira; return (dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1; } extern __inline__ uint iopin_is_in (iopin_t * iopin) { - volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira; + volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira; return ((dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; } extern __inline__ void iopin_set_odr (iopin_t * iopin) { - volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra; + volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra; odrp[iopin->port * 8] |= (1 << (31 - iopin->pin)); } extern __inline__ void iopin_set_act (iopin_t * iopin) { - volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra; + volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra; odrp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); } extern __inline__ uint iopin_is_odr (iopin_t * iopin) { - volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra; + volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra; return (odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1; } extern __inline__ uint iopin_is_act (iopin_t * iopin) { - volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra; + volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra; return ((odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; } extern __inline__ void iopin_set_ded (iopin_t * iopin) { - volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara; + volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara; parp[iopin->port * 8] |= (1 << (31 - iopin->pin)); } extern __inline__ void iopin_set_gen (iopin_t * iopin) { - volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara; + volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara; parp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); } extern __inline__ uint iopin_is_ded (iopin_t * iopin) { - volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara; + volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara; return (parp[iopin->port * 8] >> (31 - iopin->pin)) & 1; } extern __inline__ uint iopin_is_gen (iopin_t * iopin) { - volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara; + volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara; return ((parp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; } extern __inline__ void iopin_set_opt2 (iopin_t * iopin) { - volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora; + volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora; sorp[iopin->port * 8] |= (1 << (31 - iopin->pin)); } extern __inline__ void iopin_set_opt1 (iopin_t * iopin) { - volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora; + volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora; sorp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); } extern __inline__ uint iopin_is_opt2 (iopin_t * iopin) { - volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora; + volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora; return (sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1; } extern __inline__ uint iopin_is_opt1 (iopin_t * iopin) { - volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora; + volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora; return ((sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; } diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h index edcb3b9ca3..b19abe73a0 100644 --- a/include/asm-ppc/mmu.h +++ b/include/asm-ppc/mmu.h @@ -413,7 +413,9 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower); #define LAWAR_TRGT_IF_PCI1 0x00000000 #define LAWAR_TRGT_IF_PCIX 0x00000000 #define LAWAR_TRGT_IF_PCI2 0x00100000 -#define LAWAR_TRGT_IF_PEX 0x00200000 +#define LAWAR_TRGT_IF_PCIE1 0x00200000 +#define LAWAR_TRGT_IF_PCIE2 0x00100000 +#define LAWAR_TRGT_IF_PCIE3 0x00300000 #define LAWAR_TRGT_IF_LBC 0x00400000 #define LAWAR_TRGT_IF_CCSR 0x00800000 #define LAWAR_TRGT_IF_DDR_INTERLEAVED 0x00B00000 diff --git a/include/asm-sh/bitops.h b/include/asm-sh/bitops.h new file mode 100644 index 0000000000..410fba46ef --- /dev/null +++ b/include/asm-sh/bitops.h @@ -0,0 +1,151 @@ +#ifndef __ASM_SH_BITOPS_H +#define __ASM_SH_BITOPS_H + +#ifdef __KERNEL__ +#include <asm/irqflags.h> +/* For __swab32 */ +#include <asm/byteorder.h> + +static inline void set_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a |= mask; + local_irq_restore(flags); +} + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() +static inline void clear_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a &= ~mask; + local_irq_restore(flags); +} + +static inline void change_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a ^= mask; + local_irq_restore(flags); +} + +static inline int test_and_set_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a |= mask; + local_irq_restore(flags); + + return retval; +} + +static inline int test_and_clear_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a &= ~mask; + local_irq_restore(flags); + + return retval; +} + +static inline int test_and_change_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a ^= mask; + local_irq_restore(flags); + + return retval; +} + +static inline unsigned long ffz(unsigned long word) +{ + unsigned long result; + + __asm__("1:\n\t" + "shlr %1\n\t" + "bt/s 1b\n\t" + " add #1, %0" + : "=r" (result), "=r" (word) + : "0" (~0L), "1" (word) + : "t"); + return result; +} + +/** + * ffs - find first bit in word. + * @word: The word to search + * + * Undefined if no bit exists, so code should check against 0 first. + */ +static inline int ffs (int x) +{ + int r = 1; + + if (!x) + return 0; + if (!(x & 0xffff)) { + x >>= 16; + r += 16; + } + if (!(x & 0xff)) { + x >>= 8; + r += 8; + } + if (!(x & 0xf)) { + x >>= 4; + r += 4; + } + if (!(x & 3)) { + x >>= 2; + r += 2; + } + if (!(x & 1)) { + x >>= 1; + r += 1; + } + return r; +} +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_BITOPS_H */ diff --git a/include/asm-sh/byteorder.h b/include/asm-sh/byteorder.h new file mode 100644 index 0000000000..25626a0760 --- /dev/null +++ b/include/asm-sh/byteorder.h @@ -0,0 +1,30 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_SH_BYTEORDER_H_ +#define __ASM_SH_BYTEORDER_H_ + +#include <config.h> +#include <asm/types.h> + +#ifdef __LITTLE_ENDIAN__ +#include <linux/byteorder/little_endian.h> +#else +#include <linux/byteorder/big_endian.h> +#endif + +#endif diff --git a/include/asm-sh/cpu_sh4.h b/include/asm-sh/cpu_sh4.h new file mode 100644 index 0000000000..265803956d --- /dev/null +++ b/include/asm-sh/cpu_sh4.h @@ -0,0 +1,41 @@ +/* + * (C) Copyright 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_CPU_SH4_H_ +#define _ASM_CPU_SH4_H_ + +/* cache control */ +#define CCR_CACHE_STOP 0x00000808 +#define CCR_CACHE_ENABLE 0x00000101 +#define CCR_CACHE_ICI 0x00000800 + +#define CACHE_OC_ADDRESS_ARRAY 0xf4000000 +#define CACHE_OC_WAY_SHIFT 14 +#define CACHE_OC_NUM_ENTRIES 512 +#define CACHE_OC_ENTRY_SHIFT 5 + +#if defined (CONFIG_CPU_SH7750) +#include <asm/cpu_sh7750.h> +#elif defined (CONFIG_CPU_SH7722) +#include <asm/cpu_sh7722.h> +#else +#error "Unknown SH4 variant" +#endif + +#endif /* _ASM_CPU_SH4_H_ */ diff --git a/include/asm-sh/cpu_sh7722.h b/include/asm-sh/cpu_sh7722.h new file mode 100644 index 0000000000..13d4a77ede --- /dev/null +++ b/include/asm-sh/cpu_sh7722.h @@ -0,0 +1,1337 @@ +/* + * (C) Copyright 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * SH7722 Internal I/O register + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_CPU_SH7722_H_ +#define _ASM_CPU_SH7722_H_ + +#define CACHE_OC_NUM_WAYS 4 +#define CCR_CACHE_INIT 0x0000090d + +/* EXP */ +#define TRA 0xFF000020 +#define EXPEVT 0xFF000024 +#define INTEVT 0xFF000028 + +/* MMU */ +#define PTEH 0xFF000000 +#define PTEL 0xFF000004 +#define TTB 0xFF000008 +#define TEA 0xFF00000C +#define MMUCR 0xFF000010 +#define PASCR 0xFF000070 +#define IRMCR 0xFF000078 + +/* CACHE */ +#define CCR 0xFF00001C +#define RAMCR 0xFF000074 + +/* XY MEMORY */ +#define XSA 0xFF000050 +#define YSA 0xFF000054 +#define XDA 0xFF000058 +#define YDA 0xFF00005C +#define XPR 0xFF000060 +#define YPR 0xFF000064 +#define XEA 0xFF000068 +#define YEA 0xFF00006C + +/* INTC */ +#define ICR0 0xA4140000 +#define ICR1 0xA414001C +#define INTPRI0 0xA4140010 +#define INTREQ0 0xA4140024 +#define INTMSK0 0xA4140044 +#define INTMSKCLR0 0xA4140064 +#define NMIFCR 0xA41400C0 +#define USERIMASK 0xA4700000 +#define IPRA 0xA4080000 +#define IPRB 0xA4080004 +#define IPRC 0xA4080008 +#define IPRD 0xA408000C +#define IPRE 0xA4080010 +#define IPRF 0xA4080014 +#define IPRG 0xA4080018 +#define IPRH 0xA408001C +#define IPRI 0xA4080020 +#define IPRJ 0xA4080024 +#define IPRK 0xA4080028 +#define IPRL 0xA408002C +#define IMR0 0xA4080080 +#define IMR1 0xA4080084 +#define IMR2 0xA4080088 +#define IMR3 0xA408008C +#define IMR4 0xA4080090 +#define IMR5 0xA4080094 +#define IMR6 0xA4080098 +#define IMR7 0xA408009C +#define IMR8 0xA40800A0 +#define IMR9 0xA40800A4 +#define IMR10 0xA40800A8 +#define IMR11 0xA40800AC +#define IMCR0 0xA40800C0 +#define IMCR1 0xA40800C4 +#define IMCR2 0xA40800C8 +#define IMCR3 0xA40800CC +#define IMCR4 0xA40800D0 +#define IMCR5 0xA40800D4 +#define IMCR6 0xA40800D8 +#define IMCR7 0xA40800DC +#define IMCR8 0xA40800E0 +#define IMCR9 0xA40800E4 +#define IMCR10 0xA40800E8 +#define IMCR11 0xA40800EC +#define MFI_IPRA 0xA40B0000 +#define MFI_IPRB 0xA40B0004 +#define MFI_IPRC 0xA40B0008 +#define MFI_IPRD 0xA40B000C +#define MFI_IPRE 0xA40B0010 +#define MFI_IPRF 0xA40B0014 +#define MFI_IPRG 0xA40B0018 +#define MFI_IPRH 0xA40B001C +#define MFI_IPRI 0xA40B0020 +#define MFI_IPRJ 0xA40B0024 +#define MFI_IPRK 0xA40B0028 +#define MFI_IPRL 0xA40B002C +#define MFI_IMR0 0xA40B0080 +#define MFI_IMR1 0xA40B0084 +#define MFI_IMR2 0xA40B0088 +#define MFI_IMR3 0xA40B008C +#define MFI_IMR4 0xA40B0090 +#define MFI_IMR5 0xA40B0094 +#define MFI_IMR6 0xA40B0098 +#define MFI_IMR7 0xA40B009C +#define MFI_IMR8 0xA40B00A0 +#define MFI_IMR9 0xA40B00A4 +#define MFI_IMR10 0xA40B00A8 +#define MFI_IMR11 0xA40B00AC +#define MFI_IMCR0 0xA40B00C0 +#define MFI_IMCR1 0xA40B00C4 +#define MFI_IMCR2 0xA40B00C8 +#define MFI_IMCR3 0xA40B00CC +#define MFI_IMCR4 0xA40B00D0 +#define MFI_IMCR5 0xA40B00D4 +#define MFI_IMCR6 0xA40B00D8 +#define MFI_IMCR7 0xA40B00DC +#define MFI_IMCR8 0xA40B00E0 +#define MFI_IMCR9 0xA40B00E4 +#define MFI_IMCR10 0xA40B00E8 +#define MFI_IMCR11 0xA40B00EC + +/* BSC */ +#define CMNCR 0xFEC10000 +#define CS0BCR 0xFEC10004 +#define CS2BCR 0xFEC10008 +#define CS4BCR 0xFEC10010 +#define CS5ABCR 0xFEC10014 +#define CS5BBCR 0xFEC10018 +#define CS6ABCR 0xFEC1001C +#define CS6BBCR 0xFEC10020 +#define CS0WCR 0xFEC10024 +#define CS2WCR 0xFEC10028 +#define CS4WCR 0xFEC10030 +#define CS5AWCR 0xFEC10034 +#define CS5BWCR 0xFEC10038 +#define CS6AWCR 0xFEC1003C +#define CS6BWCR 0xFEC10040 +#define RBWTCNT 0xFEC10054 + +/* SBSC */ +#define SBSC_SDCR 0xFE400008 +#define SBSC_SDWCR 0xFE40000C +#define SBSC_SDPCR 0xFE400010 +#define SBSC_RTCSR 0xFE400014 +#define SBSC_RTCNT 0xFE400018 +#define SBSC_RTCOR 0xFE40001C +#define SBSC_RFCR 0xFE400020 + +/* DMAC */ +#define SAR_0 0xFE008020 +#define DAR_0 0xFE008024 +#define TCR_0 0xFE008028 +#define CHCR_0 0xFE00802C +#define SAR_1 0xFE008030 +#define DAR_1 0xFE008034 +#define TCR_1 0xFE008038 +#define CHCR_1 0xFE00803C +#define SAR_2 0xFE008040 +#define DAR_2 0xFE008044 +#define TCR_2 0xFE008048 +#define CHCR_2 0xFE00804C +#define SAR_3 0xFE008050 +#define DAR_3 0xFE008054 +#define TCR_3 0xFE008058 +#define CHCR_3 0xFE00805C +#define SAR_4 0xFE008070 +#define DAR_4 0xFE008074 +#define TCR_4 0xFE008078 +#define CHCR_4 0xFE00807C +#define SAR_5 0xFE008080 +#define DAR_5 0xFE008084 +#define TCR_5 0xFE008088 +#define CHCR_5 0xFE00808C +#define SARB_0 0xFE008120 +#define DARB_0 0xFE008124 +#define TCRB_0 0xFE008128 +#define SARB_1 0xFE008130 +#define DARB_1 0xFE008134 +#define TCRB_1 0xFE008138 +#define SARB_2 0xFE008140 +#define DARB_2 0xFE008144 +#define TCRB_2 0xFE008148 +#define SARB_3 0xFE008150 +#define DARB_3 0xFE008154 +#define TCRB_3 0xFE008158 +#define DMAOR 0xFE008060 +#define DMARS_0 0xFE009000 +#define DMARS_1 0xFE009004 +#define DMARS_2 0xFE009008 + +/* CPG */ +#define FRQCR 0xA4150000 +#define VCLKCR 0xA4150004 +#define SCLKACR 0xA4150008 +#define SCLKBCR 0xA415000C +#define PLLCR 0xA4150024 +#define DLLFRQ 0xA4150050 + +/* LOW POWER MODE */ +#define STBCR 0xA4150020 +#define MSTPCR0 0xA4150030 +#define MSTPCR1 0xA4150034 +#define MSTPCR2 0xA4150038 +#define BAR 0xA4150040 + +/* RWDT */ +#define RWTCNT 0xA4520000 +#define RWTCSR 0xA4520004 +#define WTCNT RWTCNT + + +/* TMU */ +#define TSTR 0xFFD80004 +#define TCOR0 0xFFD80008 +#define TCNT0 0xFFD8000C +#define TCR0 0xFFD80010 +#define TCOR1 0xFFD80014 +#define TCNT1 0xFFD80018 +#define TCR1 0xFFD8001C +#define TCOR2 0xFFD80020 +#define TCNT2 0xFFD80024 +#define TCR2 0xFFD80028 + +/* TPU */ +#define TPU_TSTR 0xA4C90000 +#define TPU_TCR0 0xA4C90010 +#define TPU_TMDR0 0xA4C90014 +#define TPU_TIOR0 0xA4C90018 +#define TPU_TIER0 0xA4C9001C +#define TPU_TSR0 0xA4C90020 +#define TPU_TCNT0 0xA4C90024 +#define TPU_TGR0A 0xA4C90028 +#define TPU_TGR0B 0xA4C9002C +#define TPU_TGR0C 0xA4C90030 +#define TPU_TGR0D 0xA4C90034 +#define TPU_TCR1 0xA4C90050 +#define TPU_TMDR1 0xA4C90054 +#define TPU_TIER1 0xA4C9005C +#define TPU_TSR1 0xA4C90060 +#define TPU_TCNT1 0xA4C90064 +#define TPU_TGR1A 0xA4C90068 +#define TPU_TGR1B 0xA4C9006C +#define TPU_TGR1C 0xA4C90070 +#define TPU_TGR1D 0xA4C90074 +#define TPU_TCR2 0xA4C90090 +#define TPU_TMDR2 0xA4C90094 +#define TPU_TIER2 0xA4C9009C +#define TPU_TSR2 0xA4C900A0 +#define TPU_TCNT2 0xA4C900A4 +#define TPU_TGR2A 0xA4C900A8 +#define TPU_TGR2B 0xA4C900AC +#define TPU_TGR2C 0xA4C900B0 +#define TPU_TGR2D 0xA4C900B4 +#define TPU_TCR3 0xA4C900D0 +#define TPU_TMDR3 0xA4C900D4 +#define TPU_TIER3 0xA4C900DC +#define TPU_TSR3 0xA4C900E0 +#define TPU_TCNT3 0xA4C900E4 +#define TPU_TGR3A 0xA4C900E8 +#define TPU_TGR3B 0xA4C900EC +#define TPU_TGR3C 0xA4C900F0 +#define TPU_TGR3D 0xA4C900F4 + +/* CMT */ +#define CMSTR 0xA44A0000 +#define CMCSR 0xA44A0060 +#define CMCNT 0xA44A0064 +#define CMCOR 0xA44A0068 + +/* SIO */ +#define SIOMDR 0xA4500000 +#define SIOCTR 0xA4500004 +#define SIOSTBCR0 0xA4500008 +#define SIOSTBCR1 0xA450000C +#define SIOTDR 0xA4500014 +#define SIORDR 0xA4500018 +#define SIOSTR 0xA450001C +#define SIOIER 0xA4500020 +#define SIOSCR 0xA4500024 + +/* SIOF */ +#define SIMDR0 0xA4410000 +#define SISCR0 0xA4410002 +#define SITDAR0 0xA4410004 +#define SIRDAR0 0xA4410006 +#define SICDAR0 0xA4410008 +#define SICTR0 0xA441000C +#define SIFCTR0 0xA4410010 +#define SISTR0 0xA4410014 +#define SIIER0 0xA4410016 +#define SITDR0 0xA4410020 +#define SIRDR0 0xA4410024 +#define SITCR0 0xA4410028 +#define SIRCR0 0xA441002C +#define SPICR0 0xA4410030 +#define SIMDR1 0xA4420000 +#define SISCR1 0xA4420002 +#define SITDAR1 0xA4420004 +#define SIRDAR1 0xA4420006 +#define SICDAR1 0xA4420008 +#define SICTR1 0xA442000C +#define SIFCTR1 0xA4420010 +#define SISTR1 0xA4420014 +#define SIIER1 0xA4420016 +#define SITDR1 0xA4420020 +#define SIRDR1 0xA4420024 +#define SITCR1 0xA4420028 +#define SIRCR1 0xA442002C +#define SPICR1 0xA4420030 + +/* SCIF */ +/* +#define SCSMR 0xFFE00000 +#define SCBRR 0xFFE00004 +#define SCSCR 0xFFE00008 +#define SCFTDR 0xFFE0000C +#define SCFSR 0xFFE00010 +#define SCFRDR 0xFFE00014 +#define SCFCR 0xFFE00018 +#define SCFDR 0xFFE0001C +#define SCLSR 0xFFE00024 +#define SCSMR1 0xFFE10000 +#define SCBRR1 0xFFE10004 +#define SCSCR1 0xFFE10008 +#define SCFTDR1 0xFFE1000C +#define SCFSR1 0xFFE10010 +#define SCFRDR1 0xFFE10014 +#define SCFCR1 0xFFE10018 +#define SCFDR1 0xFFE1001C +#define SCLSR1 0xFFE10024 +#define SCSMR2 0xFFE20000 +#define SCBRR2 0xFFE20004 +#define SCSCR2 0xFFE20008 +#define SCFTDR2 0xFFE2000C +#define SCFSR2 0xFFE20010 +#define SCFRDR2 0xFFE20014 +#define SCFCR2 0xFFE20018 +#define SCFDR2 0xFFE2001C +#define SCLSR2 0xFFE20024 +#define SCSMR3 0xFFE30000 +#define SCBRR3 0xFFE30004 +#define SCSCR3 0xFFE30008 +#define SCFTDR3 0xFFE3000C +#define SCFSR3 0xFFE30010 +#define SCFRDR3 0xFFE30014 +#define SCFCR3 0xFFE30018 +#define SCFDR3 0xFFE3001C +#define SCLSR3 0xFFE30024 +*/ +#define SCIF0_BASE 0xFFE00000 + +/* SIM */ +#define SIM_SCSMR 0xA4490000 +#define SIM_SCBRR 0xA4490002 +#define SIM_SCSCR 0xA4490004 +#define SIM_SCTDR 0xA4490006 +#define SIM_SCSSR 0xA4490008 +#define SIM_SCRDR 0xA449000A +#define SIM_SCSCMR 0xA449000C +#define SIM_SCSC2R 0xA449000E +#define SIM_SCWAIT 0xA4490010 +#define SIM_SCGRD 0xA4490012 +#define SIM_SCSMPL 0xA4490014 +#define SIM_SCDMAEN 0xA4490016 + +/* IrDA */ +#define IRIF_INIT1 0xA45D0012 +#define IRIF_INIT2 0xA45D0014 +#define IRIF_RINTCLR 0xA45D0016 +#define IRIF_TINTCLR 0xA45D0018 +#define IRIF_SIR0 0xA45D0020 +#define IRIF_SIR1 0xA45D0022 +#define IRIF_SIR2 0xA45D0024 +#define IRIF_SIR3 0xA45D0026 +#define IRIF_SIR_FRM 0xA45D0028 +#define IRIF_SIR_EOF 0xA45D002A +#define IRIF_SIR_FLG 0xA45D002C +#define IRIF_SIR_STS2 0xA45D002E +#define IRIF_UART0 0xA45D0030 +#define IRIF_UART1 0xA45D0032 +#define IRIF_UART2 0xA45D0034 +#define IRIF_UART3 0xA45D0036 +#define IRIF_UART4 0xA45D0038 +#define IRIF_UART5 0xA45D003A +#define IRIF_UART6 0xA45D003C +#define IRIF_UART7 0xA45D003E +#define IRIF_CRC0 0xA45D0040 +#define IRIF_CRC1 0xA45D0042 +#define IRIF_CRC2 0xA45D0044 +#define IRIF_CRC3 0xA45D0046 +#define IRIF_CRC4 0xA45D0048 + +/* IIC */ +#define ICDR0 0xA4470000 +#define ICCR0 0xA4470004 +#define ICSR0 0xA4470008 +#define ICIC0 0xA447000C +#define ICCL0 0xA4470010 +#define ICCH0 0xA4470014 +#define ICDR1 0xA4750000 +#define ICCR1 0xA4750004 +#define ICSR1 0xA4750008 +#define ICIC1 0xA475000C +#define ICCL1 0xA4750010 +#define ICCH1 0xA4750014 + +/* FLCTL */ +#define FLCMNCR 0xA4530000 +#define FLCMDCR 0xA4530004 +#define FLCMCDR 0xA4530008 +#define FLADR 0xA453000C +#define FLDATAR 0xA4530010 +#define FLDTCNTR 0xA4530014 +#define FLINTDMACR 0xA4530018 +#define FLBSYTMR 0xA453001C +#define FLBSYCNT 0xA4530020 +#define FLDTFIFO 0xA4530024 +#define FLECFIFO 0xA4530028 +#define FLTRCR 0xA453002C +#define FLADR2 0xA453003C + +/* MFI */ +#define MFIIDX 0xA4C10000 +#define MFIGSR 0xA4C10004 +#define MFISCR 0xA4C10008 +#define MFIMCR 0xA4C1000C +#define MFIIICR 0xA4C10010 +#define MFIEICR 0xA4C10014 +#define MFIADR 0xA4C10018 +#define MFIDATA 0xA4C1001C +#define MFIRCR 0xA4C10020 +#define MFIINTEVT 0xA4C1002C +#define MFIIMASK 0xA4C10030 +#define MFIBCR 0xA4C10040 +#define MFIADRW 0xA4C10044 +#define MFIADRR 0xA4C10048 +#define MFIDATAW 0xA4C1004C +#define MFIDATAR 0xA4C10050 +#define MFIMCRW 0xA4C10054 +#define MFIMCRR 0xA4C10058 +#define MFIDNRW 0xA4C1005C +#define MFIDNRR 0xA4C10060 +#define MFISIZEW 0xA4C10064 +#define MFISIZER 0xA4C10068 +#define MFIDEVCR 0xA4C10038 +#define MFISM4 0xA4C10080 + +/* VPU */ +#define VP4_CTRL 0xFE900000 +#define VP4_VOL_CTRL 0xFE900004 +#define VP4_IMAGE_SIZE 0xFE900008 +#define VP4_MB_NUM 0xFE90000C +#define VP4_DWY_ADDR 0xFE900010 +#define VP4_DWC_ADDR 0xFE900014 +#define VP4_D2WY_ADDR 0xFE900018 +#define VP4_D2WC_ADDR 0xFE90001C +#define VP4_DP1_ADDR 0xFE900020 +#define VP4_DP2_ADDR 0xFE900024 +#define VP4_STRS_ADDR 0xFE900028 +#define VP4_STRE_ADDR 0xFE90002C +#define VP4_VOP_CTRL 0xFE900030 +#define VP4_VOP_TIME 0xFE900034 +#define VP4_263_CTRL 0xFE900038 +#define VP4_264_CTRL 0xFE90003C +#define VP4_VLC_CTRL 0xFE900040 +#define VP4_ENDIAN 0xFE900044 +#define VP4_CMD 0xFE900048 +#define VP4_ME_TH1 0xFE90004C +#define VP4_ME_TH2 0xFE900050 +#define VP4_ME_COSTMB 0xFE900054 +#define VP4_ME_SKIP 0xFE900058 +#define VP4_ME_CTRL 0xFE90005C +#define VP4_MBRF_CTRL 0xFE900060 +#define VP4_MC_CTRL 0xFE900064 +#define VP4_PRED_CTRL 0xFE900068 +#define VP4_SLC_SIZE 0xFE90006C +#define VP4_VOP_MINBIT 0xFE900070 +#define VP4_MB_MAXBIT 0xFE900074 +#define VP4_MB_TBIT 0xFE900078 +#define VP4_RCQNT 0xFE90007C +#define VP4_RCRP 0xFE900080 +#define VP4_RCDJ 0xFE900084 +#define VP4_RCWQ 0xFE900088 +#define VP4_FWD_TIME 0xFE900094 +#define VP4_BWD_TIME 0xFE900098 +#define VP4_PST_TIME 0xFE90009C +#define VP4_ILTFRAME 0xFE9000A0 +#define VP4_EC_REF 0xFE9000A4 +#define VP4_STATUS 0xFE900100 +#define VP4_IRQ_ENB 0xFE900104 +#define VP4_IRQ_STA 0xFE900108 +#define VP4_VOP_BIT 0xFE90010C +#define VP4_PRV_BIT 0xFE900110 +#define VP4_SLC_MB 0xFE900114 +#define VP4_QSUM 0xFE900118 +#define VP4_DEC_ERR 0xFE90011C +#define VP4_ERR_AREA 0xFE900120 +#define VP4_NEXT_CODE 0xFE900124 +#define VP4_MB_ATTR 0xFE900128 +#define VP4_DBMON 0xFE90012C +#define VP4_DEBUG 0xFE900130 +#define VP4_ERR_DET 0xFE900134 +#define VP4_CLK_STOP 0xFE900138 +#define VP4_MB_SADA 0xFE90013C +#define VP4_MB_SADR 0xFE900140 +#define VP4_MAT_RAM 0xFE901000 +#define VP4_NC_RAM 0xFE902000 +#define WT 0xFE9020CC +#define VP4_CPY_ADDR 0xFE902264 +#define VP4_CPC_ADDR 0xFE902268 +#define VP4_R0Y_ADDR 0xFE90226C +#define VP4_R0C_ADDR 0xFE902270 +#define VP4_R1Y_ADDR 0xFE902274 +#define VP4_R1C_ADDR 0xFE902278 +#define VP4_R2Y_ADDR 0xFE90227C +#define VP4_R2C_ADDR 0xFE902280 +#define VP4_R3Y_ADDR 0xFE902284 +#define VP4_R3C_ADDR 0xFE902288 +#define VP4_R4Y_ADDR 0xFE90228C +#define VP4_R4C_ADDR 0xFE902290 +#define VP4_R5Y_ADDR 0xFE902294 +#define VP4_R5C_ADDR 0xFE902298 +#define VP4_R6Y_ADDR 0xFE90229C +#define VP4_R6C_ADDR 0xFE9022A0 +#define VP4_R7Y_ADDR 0xFE9022A4 +#define VP4_R7C_ADDR 0xFE9022A8 +#define VP4_R8Y_ADDR 0xFE9022AC +#define VP4_R8C_ADDR 0xFE9022B0 +#define VP4_R9Y_ADDR 0xFE9022B4 +#define VP4_R9C_ADDR 0xFE9022B8 +#define VP4_RAY_ADDR 0xFE9022BC +#define VP4_RAC_ADDR 0xFE9022C0 +#define VP4_RBY_ADDR 0xFE9022C4 +#define VP4_RBC_ADDR 0xFE9022C8 +#define VP4_RCY_ADDR 0xFE9022CC +#define VP4_RCC_ADDR 0xFE9022D0 +#define VP4_RDY_ADDR 0xFE9022D4 +#define VP4_RDC_ADDR 0xFE9022D8 +#define VP4_REY_ADDR 0xFE9022DC +#define VP4_REC_ADDR 0xFE9022E0 +#define VP4_RFY_ADDR 0xFE9022E4 +#define VP4_RFC_ADDR 0xFE9022E8 + +/* VIO(CEU) */ +#define CAPSR 0xFE910000 +#define CAPCR 0xFE910004 +#define CAMCR 0xFE910008 +#define CMCYR 0xFE91000C +#define CAMOR 0xFE910010 +#define CAPWR 0xFE910014 +#define CAIFR 0xFE910018 +#define CSTCR 0xFE910020 +#define CSECR 0xFE910024 +#define CRCNTR 0xFE910028 +#define CRCMPR 0xFE91002C +#define CFLCR 0xFE910030 +#define CFSZR 0xFE910034 +#define CDWDR 0xFE910038 +#define CDAYR 0xFE91003C +#define CDACR 0xFE910040 +#define CDBYR 0xFE910044 +#define CDBCR 0xFE910048 +#define CBDSR 0xFE91004C +#define CLFCR 0xFE910060 +#define CDOCR 0xFE910064 +#define CDDCR 0xFE910068 +#define CDDAR 0xFE91006C +#define CEIER 0xFE910070 +#define CETCR 0xFE910074 +#define CSTSR 0xFE91007C +#define CSRTR 0xFE910080 +#define CDAYR2 0xFE910090 +#define CDACR2 0xFE910094 +#define CDBYR2 0xFE910098 +#define CDBCR2 0xFE91009C + +/* VIO(VEU) */ +#define VESTR 0xFE920000 +#define VESWR 0xFE920010 +#define VESSR 0xFE920014 +#define VSAYR 0xFE920018 +#define VSACR 0xFE92001C +#define VBSSR 0xFE920020 +#define VEDWR 0xFE920030 +#define VDAYR 0xFE920034 +#define VDACR 0xFE920038 +#define VTRCR 0xFE920050 +#define VRFCR 0xFE920054 +#define VRFSR 0xFE920058 +#define VENHR 0xFE92005C +#define VFMCR 0xFE920070 +#define VVTCR 0xFE920074 +#define VHTCR 0xFE920078 +#define VAPCR 0xFE920080 +#define VECCR 0xFE920084 +#define VAFXR 0xFE920090 +#define VSWPR 0xFE920094 +#define VEIER 0xFE9200A0 +#define VEVTR 0xFE9200A4 +#define VSTAR 0xFE9200B0 +#define VBSRR 0xFE9200B4 + +/* VIO(BEU) */ +#define BESTR 0xFE930000 +#define BSMWR1 0xFE930010 +#define BSSZR1 0xFE930014 +#define BSAYR1 0xFE930018 +#define BSACR1 0xFE93001C +#define BSAAR1 0xFE930020 +#define BSIFR1 0xFE930024 +#define BSMWR2 0xFE930028 +#define BSSZR2 0xFE93002C +#define BSAYR2 0xFE930030 +#define BSACR2 0xFE930034 +#define BSAAR2 0xFE930038 +#define BSIFR2 0xFE93003C +#define BSMWR3 0xFE930040 +#define BSSZR3 0xFE930044 +#define BSAYR3 0xFE930048 +#define BSACR3 0xFE93004C +#define BSAAR3 0xFE930050 +#define BSIFR3 0xFE930054 +#define BTPSR 0xFE930058 +#define BMSMWR1 0xFE930070 +#define BMSSZR1 0xFE930074 +#define BMSAYR1 0xFE930078 +#define BMSACR1 0xFE93007C +#define BMSMWR2 0xFE930080 +#define BMSSZR2 0xFE930084 +#define BMSAYR2 0xFE930088 +#define BMSACR2 0xFE93008C +#define BMSMWR3 0xFE930090 +#define BMSSZR3 0xFE930094 +#define BMSAYR3 0xFE930098 +#define BMSACR3 0xFE93009C +#define BMSMWR4 0xFE9300A0 +#define BMSSZR4 0xFE9300A4 +#define BMSAYR4 0xFE9300A8 +#define BMSACR4 0xFE9300AC +#define BMSIFR 0xFE9300F0 +#define BBLCR0 0xFE930100 +#define BBLCR1 0xFE930104 +#define BPROCR 0xFE930108 +#define BMWCR0 0xFE93010C +#define BLOCR1 0xFE930114 +#define BLOCR2 0xFE930118 +#define BLOCR3 0xFE93011C +#define BMLOCR1 0xFE930120 +#define BMLOCR2 0xFE930124 +#define BMLOCR3 0xFE930128 +#define BMLOCR4 0xFE93012C +#define BMPCCR1 0xFE930130 +#define BMPCCR2 0xFE930134 +#define BPKFR 0xFE930140 +#define BPCCR0 0xFE930144 +#define BPCCR11 0xFE930148 +#define BPCCR12 0xFE93014C +#define BPCCR21 0xFE930150 +#define BPCCR22 0xFE930154 +#define BPCCR31 0xFE930158 +#define BPCCR32 0xFE93015C +#define BDMWR 0xFE930160 +#define BDAYR 0xFE930164 +#define BDACR 0xFE930168 +#define BAFXR 0xFE930180 +#define BSWPR 0xFE930184 +#define BEIER 0xFE930188 +#define BEVTR 0xFE93018C +#define BRCNTR 0xFE930194 +#define BSTAR 0xFE930198 +#define BBRSTR 0xFE93019C +#define BRCHR 0xFE9301A0 +#define CLUT 0xFE933000 + +/* JPU */ +#define JCMOD 0xFEA00000 +#define JCCMD 0xFEA00004 +#define JCSTS 0xFEA00008 +#define JCQTN 0xFEA0000C +#define JCHTN 0xFEA00010 +#define JCDRIU 0xFEA00014 +#define JCDRID 0xFEA00018 +#define JCVSZU 0xFEA0001C +#define JCVSZD 0xFEA00020 +#define JCHSZU 0xFEA00024 +#define JCHSZD 0xFEA00028 +#define JCDTCU 0xFEA0002C +#define JCDTCM 0xFEA00030 +#define JCDTCD 0xFEA00034 +#define JINTE 0xFEA00038 +#define JINTS 0xFEA0003C +#define JCDERR 0xFEA00040 +#define JCRST 0xFEA00044 +#define JIFCNT 0xFEA00060 +#define JIFECNT 0xFEA00070 +#define JIFESYA1 0xFEA00074 +#define JIFESCA1 0xFEA00078 +#define JIFESYA2 0xFEA0007C +#define JIFESCA2 0xFEA00080 +#define JIFESMW 0xFEA00084 +#define JIFESVSZ 0xFEA00088 +#define JIFESHSZ 0xFEA0008C +#define JIFEDA1 0xFEA00090 +#define JIFEDA2 0xFEA00094 +#define JIFEDRSZ 0xFEA00098 +#define JIFDCNT 0xFEA000A0 +#define JIFDSA1 0xFEA000A4 +#define JIFDSA2 0xFEA000A8 +#define JIFDDRSZ 0xFEA000AC +#define JIFDDMW 0xFEA000B0 +#define JIFDDVSZ 0xFEA000B4 +#define JIFDDHSZ 0xFEA000B8 +#define JIFDDYA1 0xFEA000BC +#define JIFDDCA1 0xFEA000C0 +#define JIFDDYA2 0xFEA000C4 +#define JIFDDCA2 0xFEA000C8 +#define JCQTBL0 0xFEA10000 +#define JCQTBL1 0xFEA10040 +#define JCQTBL2 0xFEA10080 +#define JCQTBL3 0xFEA100C0 +#define JCHTBD0 0xFEA10100 +#define JCHTBA0 0xFEA10120 +#define JCHTBD1 0xFEA10200 +#define JCHTBA1 0xFEA10220 + +/* LCDC */ +#define MLDDCKPAT1R 0xFE940400 +#define MLDDCKPAT2R 0xFE940404 +#define SLDDCKPAT1R 0xFE940408 +#define SLDDCKPAT2R 0xFE94040C +#define LDDCKR 0xFE940410 +#define LDDCKSTPR 0xFE940414 +#define MLDMT1R 0xFE940418 +#define MLDMT2R 0xFE94041C +#define MLDMT3R 0xFE940420 +#define MLDDFR 0xFE940424 +#define MLDSM1R 0xFE940428 +#define MLDSM2R 0xFE94042C +#define MLDSA1R 0xFE940430 +#define MLDSA2R 0xFE940434 +#define MLDMLSR 0xFE940438 +#define MLDWBFR 0xFE94043C +#define MLDWBCNTR 0xFE940440 +#define MLDWBAR 0xFE940444 +#define MLDHCNR 0xFE940448 +#define MLDHSYNR 0xFE94044C +#define MLDVLNR 0xFE940450 +#define MLDVSYNR 0xFE940454 +#define MLDHPDR 0xFE940458 +#define MLDVPDR 0xFE94045C +#define MLDPMR 0xFE940460 +#define LDPALCR 0xFE940464 +#define LDINTR 0xFE940468 +#define LDSR 0xFE94046C +#define LDCNT1R 0xFE940470 +#define LDCNT2R 0xFE940474 +#define LDRCNTR 0xFE940478 +#define LDDDSR 0xFE94047C +#define LDRCR 0xFE940484 +#define LDCMRKRGBR 0xFE9404C4 +#define LDCMRKCMYR 0xFE9404C8 +#define LDCMRK1R 0xFE9404CC +#define LDCMRK2R 0xFE9404D0 +#define LDCMGKRGBR 0xFE9404D4 +#define LDCMGKCMYR 0xFE9404D8 +#define LDCMGK1R 0xFE9404DC +#define LDCMGK2R 0xFE9404E0 +#define LDCMBKRGBR 0xFE9404E4 +#define LDCMBKCMYR 0xFE9404E8 +#define LDCMBK1R 0xFE9404EC +#define LDCMBK2R 0xFE9404F0 +#define LDCMHKPR 0xFE9404F4 +#define LDCMHKQR 0xFE9404F8 +#define LDCMSELR 0xFE9404FC +#define LDCMTVR 0xFE940500 +#define LDCMTVSELR 0xFE940504 +#define LDCMDTHR 0xFE940508 +#define LDCMCNTR 0xFE94050C +#define SLDMT1R 0xFE940600 +#define SLDMT2R 0xFE940604 +#define SLDMT3R 0xFE940608 +#define SLDDFR 0xFE94060C +#define SLDSM1R 0xFE940610 +#define SLDSM2R 0xFE940614 +#define SLDSA1R 0xFE940618 +#define SLDSA2R 0xFE94061C +#define SLDMLSR 0xFE940620 +#define SLDHCNR 0xFE940624 +#define SLDHSYNR 0xFE940628 +#define SLDVLNR 0xFE94062C +#define SLDVSYNR 0xFE940630 +#define SLDHPDR 0xFE940634 +#define SLDVPDR 0xFE940638 +#define SLDPMR 0xFE94063C +#define LDDWD0R 0xFE940800 +#define LDDWD1R 0xFE940804 +#define LDDWD2R 0xFE940808 +#define LDDWD3R 0xFE94080C +#define LDDWD4R 0xFE940810 +#define LDDWD5R 0xFE940814 +#define LDDWD6R 0xFE940818 +#define LDDWD7R 0xFE94081C +#define LDDWD8R 0xFE940820 +#define LDDWD9R 0xFE940824 +#define LDDWDAR 0xFE940828 +#define LDDWDBR 0xFE94082C +#define LDDWDCR 0xFE940830 +#define LDDWDDR 0xFE940834 +#define LDDWDER 0xFE940838 +#define LDDWDFR 0xFE94083C +#define LDDRDR 0xFE940840 +#define LDDWAR 0xFE940900 +#define LDDRAR 0xFE940904 +#define LDPR00 0xFE940000 + +/* VOU */ +#define VOUER 0xFE960000 +#define VOUCR 0xFE960004 +#define VOUSTR 0xFE960008 +#define VOUVCR 0xFE96000C +#define VOUISR 0xFE960010 +#define VOUBCR 0xFE960014 +#define VOUDPR 0xFE960018 +#define VOUDSR 0xFE96001C +#define VOUVPR 0xFE960020 +#define VOUIR 0xFE960024 +#define VOUSRR 0xFE960028 +#define VOUMSR 0xFE96002C +#define VOUHIR 0xFE960030 +#define VOUDFR 0xFE960034 +#define VOUAD1R 0xFE960038 +#define VOUAD2R 0xFE96003C +#define VOUAIR 0xFE960040 +#define VOUSWR 0xFE960044 +#define VOURCR 0xFE960048 +#define VOURPR 0xFE960050 + +/* TSIF */ +#define TSCTLR 0xA4C80000 +#define TSPIDR 0xA4C80004 +#define TSCMDR 0xA4C80008 +#define TSSTR 0xA4C8000C +#define TSTSDR 0xA4C80010 +#define TSBUFCLRR 0xA4C80014 +#define TSINTER 0xA4C80018 +#define TSPSCALER 0xA4C80020 +#define TSPSCALERR 0xA4C80024 +#define TSPCRADCMDR 0xA4C80028 +#define TSPCRADCR 0xA4C8002C +#define TSTRPCRADCR 0xA4C80030 +#define TSDPCRADCR 0xA4C80034 + +/* SIU */ +#define IFCTL 0xA454C000 +#define SRCTL 0xA454C004 +#define SFORM 0xA454C008 +#define CKCTL 0xA454C00C +#define TRDAT 0xA454C010 +#define STFIFO 0xA454C014 +#define DPAK 0xA454C01C +#define CKREV 0xA454C020 +#define EVNTC 0xA454C028 +#define SBCTL 0xA454C040 +#define SBPSET 0xA454C044 +#define SBBUS 0xA454C048 +#define SBWFLG 0xA454C058 +#define SBRFLG 0xA454C05C +#define SBWDAT 0xA454C060 +#define SBRDAT 0xA454C064 +#define SBFSTS 0xA454C068 +#define SBDVCA 0xA454C06C +#define SBDVCB 0xA454C070 +#define SBACTIV 0xA454C074 +#define DMAIA 0xA454C090 +#define DMAIB 0xA454C094 +#define DMAOA 0xA454C098 +#define DMAOB 0xA454C09C +#define SPLRI 0xA454C0B8 +#define SPRRI 0xA454C0BC +#define SPURI 0xA454C0C4 +#define SPTIS 0xA454C0C8 +#define SPSTS 0xA454C0CC +#define SPCTL 0xA454C0D0 +#define SPIRI 0xA454C0D4 +#define SPQCF 0xA454C0D8 +#define SPQCS 0xA454C0DC +#define SPQCT 0xA454C0E0 +#define DPEAK 0xA454C0F0 +#define DSLPD 0xA454C0F4 +#define DSLLV 0xA454C0F8 +#define BRGASEL 0xA454C100 +#define BRRA 0xA454C104 +#define BRGBSEL 0xA454C108 +#define BRRB 0xA454C10C + +/* USB */ +#define IFR0 0xA4480000 +#define ISR0 0xA4480010 +#define IER0 0xA4480020 +#define EPDR0I 0xA4480030 +#define EPDR0O 0xA4480034 +#define EPDR0S 0xA4480038 +#define EPDR1 0xA448003C +#define EPDR2 0xA4480040 +#define EPDR3 0xA4480044 +#define EPDR4 0xA4480048 +#define EPDR5 0xA448004C +#define EPDR6 0xA4480050 +#define EPDR7 0xA4480054 +#define EPDR8 0xA4480058 +#define EPDR9 0xA448005C +#define EPSZ0O 0xA4480080 +#define EPSZ3 0xA4480084 +#define EPSZ6 0xA4480088 +#define EPSZ9 0xA448008C +#define TRG 0xA44800A0 +#define DASTS 0xA44800A4 +#define FCLR 0xA44800AA +#define DMA 0xA44800AC +#define EPSTL 0xA44800B2 +#define CVR 0xA44800B4 +#define TSR 0xA44800B8 +#define CTLR 0xA44800BC +#define EPIR 0xA44800C0 +#define XVERCR 0xA44800D0 +#define STLMR 0xA44800D4 + +/* KEYSC */ +#define KYCR1 0xA44B0000 +#define KYCR2 0xA44B0004 +#define KYINDR 0xA44B0008 +#define KYOUTDR 0xA44B000C + +/* MMCIF */ +#define CMDR0 0xA4448000 +#define CMDR1 0xA4448001 +#define CMDR2 0xA4448002 +#define CMDR3 0xA4448003 +#define CMDR4 0xA4448004 +#define CMDR5 0xA4448005 +#define CMDSTRT 0xA4448006 +#define OPCR 0xA444800A +#define CSTR 0xA444800B +#define INTCR0 0xA444800C +#define INTCR1 0xA444800D +#define INTSTR0 0xA444800E +#define INTSTR1 0xA444800F +#define CLKON 0xA4448010 +#define CTOCR 0xA4448011 +#define VDCNT 0xA4448012 +#define TBCR 0xA4448014 +#define MODER 0xA4448016 +#define CMDTYR 0xA4448018 +#define RSPTYR 0xA4448019 +#define TBNCR 0xA444801A +#define RSPR0 0xA4448020 +#define RSPR1 0xA4448021 +#define RSPR2 0xA4448022 +#define RSPR3 0xA4448023 +#define RSPR4 0xA4448024 +#define RSPR5 0xA4448025 +#define RSPR6 0xA4448026 +#define RSPR7 0xA4448027 +#define RSPR8 0xA4448028 +#define RSPR9 0xA4448029 +#define RSPR10 0xA444802A +#define RSPR11 0xA444802B +#define RSPR12 0xA444802C +#define RSPR13 0xA444802D +#define RSPR14 0xA444802E +#define RSPR15 0xA444802F +#define RSPR16 0xA4448030 +#define RSPRD 0xA4448031 +#define DTOUTR 0xA4448032 +#define DR 0xA4448040 +#define FIFOCLR 0xA4448042 +#define DMACR 0xA4448044 +#define INTCR2 0xA4448046 +#define INTSTR2 0xA4448048 + +/* Z3D3 */ +#define DLBI 0xFD980000 +#define DLBD0 0xFD980080 +#define DLBD1 0xFD980100 +#define GEWM 0xFD984000 +#define ICD0 0xFD988000 +#define ICD1 0xFD989000 +#define ICT 0xFD98A000 +#define ILM 0xFD98C000 +#define FLM0 0xFD98C800 +#define FLM1 0xFD98D000 +#define FLUT 0xFD98D800 +#define Z3D_PC 0xFD98E400 +#define Z3D_PCSP 0xFD98E404 +#define Z3D_PAR 0xFD98E408 +#define Z3D_IMADR 0xFD98E40C +#define Z3D_BTR0 0xFD98E410 +#define Z3D_BTR1 0xFD98E414 +#define Z3D_BTR2 0xFD98E418 +#define Z3D_BTR3 0xFD98E41C +#define Z3D_LC0 0xFD98E420 +#define Z3D_LC1 0xFD98E424 +#define Z3D_LC2 0xFD98E428 +#define Z3D_LC3 0xFD98E42C +#define Z3D_FR0 0xFD98E430 +#define Z3D_FR1 0xFD98E434 +#define Z3D_FR2 0xFD98E438 +#define Z3D_SR 0xFD98E440 +#define Z3D_SMDR 0xFD98E444 +#define Z3D_PBIR 0xFD98E448 +#define Z3D_DMDR 0xFD98E44C +#define Z3D_IREG 0xFD98E460 +#define Z3D_AR00 0xFD98E480 +#define Z3D_AR01 0xFD98E484 +#define Z3D_AR02 0xFD98E488 +#define Z3D_AR03 0xFD98E48C +#define Z3D_BR00 0xFD98E490 +#define Z3D_BR01 0xFD98E494 +#define Z3D_IXR00 0xFD98E4A0 +#define Z3D_IXR01 0xFD98E4A4 +#define Z3D_IXR02 0xFD98E4A8 +#define Z3D_IXR03 0xFD98E4AC +#define Z3D_AR10 0xFD98E4C0 +#define Z3D_AR11 0xFD98E4C4 +#define Z3D_AR12 0xFD98E4C8 +#define Z3D_AR13 0xFD98E4CC +#define Z3D_BR10 0xFD98E4D0 +#define Z3D_BR11 0xFD98E4D4 +#define Z3D_IXR10 0xFD98E4E0 +#define Z3D_IXR11 0xFD98E4E4 +#define Z3D_IXR12 0xFD98E4E8 +#define Z3D_IXR13 0xFD98E4EC +#define Z3D_AR20 0xFD98E500 +#define Z3D_AR21 0xFD98E504 +#define Z3D_AR22 0xFD98E508 +#define Z3D_AR23 0xFD98E50C +#define Z3D_BR20 0xFD98E510 +#define Z3D_BR21 0xFD98E514 +#define Z3D_IXR20 0xFD98E520 +#define Z3D_IXR21 0xFD98E524 +#define Z3D_IXR22 0xFD98E528 +#define Z3D_IXR23 0xFD98E52C +#define Z3D_MR0 0xFD98E540 +#define Z3D_MR1 0xFD98E544 +#define Z3D_MR2 0xFD98E548 +#define Z3D_MR3 0xFD98E54C +#define Z3D_WORKRST 0xFD98E558 +#define Z3D_WORKWST 0xFD98E55C +#define Z3D_DBADR 0xFD98E560 +#define Z3D_DLBPRST 0xFD98E564 +#define Z3D_DLBRST 0xFD98E568 +#define Z3D_DLBWST 0xFD98E56C +#define Z3D_UDR0 0xFD98E570 +#define Z3D_UDR1 0xFD98E574 +#define Z3D_UDR2 0xFD98E578 +#define Z3D_UDR3 0xFD98E57C +#define Z3D_CCR0 0xFD98E580 +#define Z3D_CCR1 0xFD98E584 +#define Z3D_EXPR 0xFD98E588 +#define Z3D_V0_X 0xFD9A0000 +#define Z3D_V0_Y 0xFD9A0004 +#define Z3D_V0_Z 0xFD9A0008 +#define Z3D_V0_W 0xFD9A000C +#define Z3D_V0_A 0xFD9A0010 +#define Z3D_V0_R 0xFD9A0014 +#define Z3D_V0_G 0xFD9A0018 +#define Z3D_V0_B 0xFD9A001C +#define Z3D_V0_F 0xFD9A0020 +#define Z3D_V0_SR 0xFD9A0024 +#define Z3D_V0_SG 0xFD9A0028 +#define Z3D_V0_SB 0xFD9A002C +#define Z3D_V0_U0 0xFD9A0030 +#define Z3D_V0_V0 0xFD9A0034 +#define Z3D_V0_U1 0xFD9A0038 +#define Z3D_V0_V1 0xFD9A003C +#define Z3D_V1_X 0xFD9A0080 +#define Z3D_V1_Y 0xFD9A0084 +#define Z3D_V1_Z 0xFD9A0088 +#define Z3D_V1_W 0xFD9A008C +#define Z3D_V1_A 0xFD9A0090 +#define Z3D_V1_R 0xFD9A0094 +#define Z3D_V1_G 0xFD9A0098 +#define Z3D_V1_B 0xFD9A009C +#define Z3D_V1_F 0xFD9A00A0 +#define Z3D_V1_SR 0xFD9A00A4 +#define Z3D_V1_SG 0xFD9A00A8 +#define Z3D_V1_SB 0xFD9A00AC +#define Z3D_V1_U0 0xFD9A00B0 +#define Z3D_V1_V0 0xFD9A00B4 +#define Z3D_V1_U1 0xFD9A00B8 +#define Z3D_V1_V1 0xFD9A00BC +#define Z3D_V2_X 0xFD9A0100 +#define Z3D_V2_Y 0xFD9A0104 +#define Z3D_V2_Z 0xFD9A0108 +#define Z3D_V2_W 0xFD9A010C +#define Z3D_V2_A 0xFD9A0110 +#define Z3D_V2_R 0xFD9A0114 +#define Z3D_V2_G 0xFD9A0118 +#define Z3D_V2_B 0xFD9A011C +#define Z3D_V2_F 0xFD9A0120 +#define Z3D_V2_SR 0xFD9A0124 +#define Z3D_V2_SG 0xFD9A0128 +#define Z3D_V2_SB 0xFD9A012C +#define Z3D_V2_U0 0xFD9A0130 +#define Z3D_V2_V0 0xFD9A0134 +#define Z3D_V2_U1 0xFD9A0138 +#define Z3D_V2_V1 0xFD9A013C +#define Z3D_RENDER 0xFD9A0180 +#define Z3D_POLYGON_OFFSET 0xFD9A0184 +#define Z3D_VERTEX_CONTROL 0xFD9A0200 +#define Z3D_STATE_MODE 0xFD9A0204 +#define Z3D_FPU_MODE 0xFD9A0318 +#define Z3D_SCISSOR_MIN 0xFD9A0400 +#define Z3D_SCISSOR_MAX 0xFD9A0404 +#define Z3D_TEXTURE_MODE_A 0xFD9A0408 +#define Z3D_TEXTURE_MODE_B 0xFD9A040C +#define Z3D_TEXTURE_BASE_HI_A 0xFD9A0418 +#define Z3D_TEXTURE_BASE_LO_A 0xFD9A041C +#define Z3D_TEXTURE_BASE_HI_B 0xFD9A0420 +#define Z3D_TEXTURE_BASE_LO_B 0xFD9A0424 +#define Z3D_TEXTURE_ALPHA_A0 0xFD9A0438 +#define Z3D_TEXTURE_ALPHA_A1 0xFD9A043C +#define Z3D_TEXTURE_ALPHA_A2 0xFD9A0440 +#define Z3D_TEXTURE_ALPHA_A3 0xFD9A0444 +#define Z3D_TEXTURE_ALPHA_A4 0xFD9A0448 +#define Z3D_TEXTURE_ALPHA_A5 0xFD9A044C +#define Z3D_TEXTURE_ALPHA_B0 0xFD9A0450 +#define Z3D_TEXTURE_ALPHA_B1 0xFD9A0454 +#define Z3D_TEXTURE_ALPHA_B2 0xFD9A0458 +#define Z3D_TEXTURE_ALPHA_B3 0xFD9A045C +#define Z3D_TEXTURE_ALPHA_B4 0xFD9A0460 +#define Z3D_TEXTURE_ALPHA_B5 0xFD9A0464 +#define Z3D_TEXTURE_FLUSH 0xFD9A0498 +#define Z3D_GAMMA_TABLE0 0xFD9A049C +#define Z3D_GAMMA_TABLE1 0xFD9A04A0 +#define Z3D_GAMMA_TABLE2 0xFD9A04A4 +#define Z3D_ALPHA_TEST 0xFD9A0800 +#define Z3D_STENCIL_TEST 0xFD9A0804 +#define Z3D_DEPTH_ROP_BLEND_DITHER 0xFD9A0808 +#define Z3D_MASK 0xFD9A080C +#define Z3D_FBUS_MODE 0xFD9A0810 +#define Z3D_GNT_SET 0xFD9A0814 +#define Z3D_BETWEEN_TEST 0xFD9A0818 +#define Z3D_FB_BASE 0xFD9A081C +#define Z3D_LCD_SIZE 0xFD9A0820 +#define Z3D_FB_FLUSH 0xFD9A0824 +#define Z3D_CACHE_INVALID 0xFD9A0828 +#define Z3D_SC_MODE 0xFD9A0830 +#define Z3D_SC0_MIN 0xFD9A0834 +#define Z3D_SC0_MAX 0xFD9A0838 +#define Z3D_SC1_MIN 0xFD9A083C +#define Z3D_SC1_MAX 0xFD9A0840 +#define Z3D_SC2_MIN 0xFD9A0844 +#define Z3D_SC2_MAX 0xFD9A0848 +#define Z3D_SC3_MIN 0xFD9A084C +#define Z3D_SC3_MAX 0xFD9A0850 +#define Z3D_READRESET 0xFD9A0854 +#define Z3D_DET_MIN 0xFD9A0858 +#define Z3D_DET_MAX 0xFD9A085C +#define Z3D_FB_BASE_SR 0xFD9A0860 +#define Z3D_LCD_SIZE_SR 0xFD9A0864 +#define Z3D_2D_CTRL_STATUS 0xFD9A0C00 +#define Z3D_2D_SIZE 0xFD9A0C04 +#define Z3D_2D_SRCLOC 0xFD9A0C08 +#define Z3D_2D_DSTLOC 0xFD9A0C0C +#define Z3D_2D_DMAPORT 0xFD9A0C10 +#define Z3D_2D_CONSTANT_SOURCE0 0xFD9A0C14 +#define Z3D_2D_CONSTANT_SOURCE1 0xFD9A0C18 +#define Z3D_2D_STPCOLOR0 0xFD9A0C1C +#define Z3D_2D_STPCOLOR1 0xFD9A0C20 +#define Z3D_2D_STPPARAMETER_SET0 0xFD9A0C24 +#define Z3D_2D_STPPARAMETER_SET1 0xFD9A0C28 +#define Z3D_2D_STPPAT_0 0xFD9A0C40 +#define Z3D_2D_STPPAT_1 0xFD9A0C44 +#define Z3D_2D_STPPAT_2 0xFD9A0C48 +#define Z3D_2D_STPPAT_3 0xFD9A0C4C +#define Z3D_2D_STPPAT_4 0xFD9A0C50 +#define Z3D_2D_STPPAT_5 0xFD9A0C54 +#define Z3D_2D_STPPAT_6 0xFD9A0C58 +#define Z3D_2D_STPPAT_7 0xFD9A0C5C +#define Z3D_2D_STPPAT_8 0xFD9A0C60 +#define Z3D_2D_STPPAT_9 0xFD9A0C64 +#define Z3D_2D_STPPAT_10 0xFD9A0C68 +#define Z3D_2D_STPPAT_11 0xFD9A0C6C +#define Z3D_2D_STPPAT_12 0xFD9A0C70 +#define Z3D_2D_STPPAT_13 0xFD9A0C74 +#define Z3D_2D_STPPAT_14 0xFD9A0C78 +#define Z3D_2D_STPPAT_15 0xFD9A0C7C +#define Z3D_2D_STPPAT_16 0xFD9A0C80 +#define Z3D_2D_STPPAT_17 0xFD9A0C84 +#define Z3D_2D_STPPAT_18 0xFD9A0C88 +#define Z3D_2D_STPPAT_19 0xFD9A0C8C +#define Z3D_2D_STPPAT_20 0xFD9A0C90 +#define Z3D_2D_STPPAT_21 0xFD9A0C94 +#define Z3D_2D_STPPAT_22 0xFD9A0C98 +#define Z3D_2D_STPPAT_23 0xFD9A0C9C +#define Z3D_2D_STPPAT_24 0xFD9A0CA0 +#define Z3D_2D_STPPAT_25 0xFD9A0CA4 +#define Z3D_2D_STPPAT_26 0xFD9A0CA8 +#define Z3D_2D_STPPAT_27 0xFD9A0CAC +#define Z3D_2D_STPPAT_28 0xFD9A0CB0 +#define Z3D_2D_STPPAT_29 0xFD9A0CB4 +#define Z3D_2D_STPPAT_30 0xFD9A0CB8 +#define Z3D_2D_STPPAT_31 0xFD9A0CBC +#define Z3D_WR_CTRL 0xFD9A1000 +#define Z3D_WR_P0 0xFD9A1004 +#define Z3D_WR_P1 0xFD9A1008 +#define Z3D_WR_P2 0xFD9A100C +#define Z3D_WR_FGC 0xFD9A1010 +#define Z3D_WR_BGC 0xFD9A1014 +#define Z3D_WR_SZ 0xFD9A1018 +#define Z3D_WR_PATPARAM 0xFD9A101C +#define Z3D_WR_PAT 0xFD9A1020 +#define Z3D_SYS_STATUS 0xFD9A1400 +#define Z3D_SYS_RESET 0xFD9A1404 +#define Z3D_SYS_CLK 0xFD9A1408 +#define Z3D_SYS_CONF 0xFD9A140C +#define Z3D_SYS_VERSION 0xFD9A1410 +#define Z3D_SYS_DBINV 0xFD9A1418 +#define Z3D_SYS_I2F_FMT 0xFD9A1420 +#define Z3D_SYS_I2F_SRC 0xFD9A1424 +#define Z3D_SYS_I2F_DST 0xFD9A1428 +#define Z3D_SYS_GBCNT 0xFD9A1430 +#define Z3D_SYS_BSYCNT 0xFD9A1434 +#define Z3D_SYS_INT_STATUS 0xFD9A1450 +#define Z3D_SYS_INT_MASK 0xFD9A1454 +#define Z3D_SYS_INT_CLEAR 0xFD9A1458 +#define TCD0 0xFD9C0000 +#define TCD1 0xFD9C0400 +#define TCD2 0xFD9C0800 +#define TCD3 0xFD9C0C00 +#define TCT0 0xFD9C1000 +#define TCT1 0xFD9C1400 +#define TCT2 0xFD9C1800 +#define TCT3 0xFD9C1C00 + +/* PFC */ +#define PACR 0xA4050100 +#define PBCR 0xA4050102 +#define PCCR 0xA4050104 +#define PDCR 0xA4050106 +#define PECR 0xA4050108 +#define PFCR 0xA405010A +#define PGCR 0xA405010C +#define PHCR 0xA405010E +#define PJCR 0xA4050110 +#define PKCR 0xA4050112 +#define PLCR 0xA4050114 +#define PMCR 0xA4050116 +#define PNCR 0xA4050118 +#define PQCR 0xA405011A +#define PRCR 0xA405011C +#define PSCR 0xA405011E +#define PTCR 0xA4050140 +#define PUCR 0xA4050142 +#define PVCR 0xA4050144 +#define PWCR 0xA4050146 +#define PXCR 0xA4050148 +#define PYCR 0xA405014A +#define PZCR 0xA405014C +#define PSELA 0xA405014E +#define PSELB 0xA4050150 +#define PSELC 0xA4050152 +#define PSELD 0xA4050154 +#define PSELE 0xA4050156 +#define HIZCRA 0xA4050158 +#define HIZCRB 0xA405015A +#define HIZCRC 0xA405015C +#define MSELCR 0xA405015C +#define PULCR 0xA405015E +#define DRVCR 0xA4050180 +#define SBSCR 0xA4050182 +#define AUDTHCR 0xA4050184 +#define PSELF 0xA4050186 + +/* I/O Port */ +#define PADR 0xA4050120 +#define PBDR 0xA4050122 +#define PCDR 0xA4050124 +#define PDDR 0xA4050126 +#define PEDR 0xA4050128 +#define PFDR 0xA405012A +#define PGDR 0xA405012C +#define PHDR 0xA405012E +#define PJDR 0xA4050130 +#define PKDR 0xA4050132 +#define PLDR 0xA4050134 +#define PMDR 0xA4050136 +#define PNDR 0xA4050138 +#define PQDR 0xA405013A +#define PRDR 0xA405013C +#define PSDR 0xA405013E +#define PTDR 0xA4050160 +#define PUDR 0xA4050162 +#define PVDR 0xA4050164 +#define PWDR 0xA4050166 +#define PYDR 0xA4050168 +#define PZDR 0xA405016A + +/* UBC */ +#define CBR0 0xFF200000 +#define CRR0 0xFF200004 +#define CAR0 0xFF200008 +#define CAMR0 0xFF20000C +#define CBR1 0xFF200020 +#define CRR1 0xFF200024 +#define CAR1 0xFF200028 +#define CAMR1 0xFF20002C +#define CDR1 0xFF200030 +#define CDMR1 0xFF200034 +#define CETR1 0xFF200038 +#define CCMFR 0xFF200600 +#define CBCR 0xFF200620 + +/* H-UDI */ +#define SDIR 0xFC110000 +#define SDDRH 0xFC110008 +#define SDDRL 0xFC11000A +#define SDINT 0xFC110018 + +#endif /* _ASM_CPU_SH7722_H_ */ diff --git a/include/asm-sh/cpu_sh7750.h b/include/asm-sh/cpu_sh7750.h new file mode 100644 index 0000000000..bb6461a6bf --- /dev/null +++ b/include/asm-sh/cpu_sh7750.h @@ -0,0 +1,196 @@ +/* + * (C) Copyright 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * SH7750/SH7750S/SH7750R/SH7751/SH7751R + * Internal I/O register + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_CPU_SH7750_H_ +#define _ASM_CPU_SH7750_H_ + +#ifdef CONFIG_CPU_TYPE_R +#define CACHE_OC_NUM_WAYS 2 +#define CCR_CACHE_INIT 0x8000090d /* EMODE,ICI,ICE(16k),OCI,P1-wb,OCE(32k) */ +#else +#define CACHE_OC_NUM_WAYS 1 +#define CCR_CACHE_INIT 0x0000090b +#endif + +/* OCN */ +#define PTEH 0xFF000000 +#define PTEL 0xFF000004 +#define TTB 0xFF000008 +#define TEA 0xFF00000C +#define MMUCR 0xFF000010 +#define BASRA 0xFF000014 +#define BASRB 0xFF000018 +#define CCR 0xFF00001C +#define TRA 0xFF000020 +#define EXPEVT 0xFF000024 +#define INTEVT 0xFF000028 +#define PTEA 0xFF000034 +#define QACR0 0xFF000038 +#define QACR1 0xFF00003C + +/* UBC */ +#define BARA 0xFF200000 +#define BAMRA 0xFF200004 +#define BBRA 0xFF200008 +#define BARB 0xFF20000C +#define BAMRB 0xFF200010 +#define BBRB 0xFF200014 +#define BDRB 0xFF200018 +#define BDMRB 0xFF20001C +#define BRCR 0xFF200020 + +/* BSC */ +#define BCR1 0xFF800000 +#define BCR2 0xFF800004 +#define BCR3 0xFF800050 +#define BCR4 0xFE0A00F0 +#define WCR1 0xFF800008 +#define WCR2 0xFF80000C +#define WCR3 0xFF800010 +#define MCR 0xFF800014 +#define PCR 0xFF800018 +#define RTCSR 0xFF80001C +#define RTCNT 0xFF800020 +#define RTCOR 0xFF800024 +#define RFCR 0xFF800028 +#define PCTRA 0xFF80002C +#define PDTRA 0xFF800030 +#define PCTRB 0xFF800040 +#define PDTRB 0xFF800044 +#define GPIOIC 0xFF800048 + +/* DMAC */ +#define SAR0 0xFFA00000 +#define DAR0 0xFFA00004 +#define DMATCR0 0xFFA00008 +#define CHCR0 0xFFA0000C +#define SAR1 0xFFA00010 +#define DAR1 0xFFA00014 +#define DMATCR1 0xFFA00018 +#define CHCR1 0xFFA0001C +#define SAR2 0xFFA00020 +#define DAR2 0xFFA00024 +#define DMATCR2 0xFFA00028 +#define CHCR2 0xFFA0002C +#define SAR3 0xFFA00030 +#define DAR3 0xFFA00034 +#define DMATCR3 0xFFA00038 +#define CHCR3 0xFFA0003C +#define DMAOR 0xFFA00040 +#define SAR4 0xFFA00050 +#define DAR4 0xFFA00054 +#define DMATCR4 0xFFA00058 + +/* CPG */ +#define FRQCR 0xFFC00000 +#define STBCR 0xFFC00004 +#define WTCNT 0xFFC00008 +#define WTCSR 0xFFC0000C +#define STBCR2 0xFFC00010 + +/* RTC */ +#define R64CNT 0xFFC80000 +#define RSECCNT 0xFFC80004 +#define RMINCNT 0xFFC80008 +#define RHRCNT 0xFFC8000C +#define RWKCNT 0xFFC80010 +#define RDAYCNT 0xFFC80014 +#define RMONCNT 0xFFC80018 +#define RYRCNT 0xFFC8001C +#define RSECAR 0xFFC80020 +#define RMINAR 0xFFC80024 +#define RHRAR 0xFFC80028 +#define RWKAR 0xFFC8002C +#define RDAYAR 0xFFC80030 +#define RMONAR 0xFFC80034 +#define RCR1 0xFFC80038 +#define RCR2 0xFFC8003C +#define RCR3 0xFFC80050 +#define RYRAR 0xFFC80054 + +/* ICR */ +#define ICR 0xFFD00000 +#define IPRA 0xFFD00004 +#define IPRB 0xFFD00008 +#define IPRC 0xFFD0000C +#define IPRD 0xFFD00010 +#define INTPRI 0xFE080000 +#define INTREQ 0xFE080020 +#define INTMSK 0xFE080040 +#define INTMSKCL 0xFE080060 + +/* CPG */ +#define CLKSTP 0xFE0A0000 +#define CLKSTPCLR 0xFE0A0008 + +/* TMU */ +#define TSTR2 0xFE100004 +#define TCOR3 0xFE100008 +#define TCNT3 0xFE10000C +#define TCR3 0xFE100010 +#define TCOR4 0xFE100014 +#define TCNT4 0xFE100018 +#define TCR4 0xFE10001C +#define TOCR 0xFFD80000 +#define TSTR0 0xFFD80004 +#define TCOR0 0xFFD80008 +#define TCNT0 0xFFD8000C +#define TCR0 0xFFD80010 +#define TCOR1 0xFFD80014 +#define TCNT1 0xFFD80018 +#define TCR1 0xFFD8001C +#define TCOR2 0xFFD80020 +#define TCNT2 0xFFD80024 +#define TCR2 0xFFD80028 +#define TCPR2 0xFFD8002C +#define TSTR TSTR0 + +/* SCI */ +#define SCSMR1 0xFFE00000 +#define SCBRR1 0xFFE00004 +#define SCSCR1 0xFFE00008 +#define SCTDR1 0xFFE0000C +#define SCSSR1 0xFFE00010 +#define SCRDR1 0xFFE00014 +#define SCSCMR1 0xFFE00018 +#define SCSPTR1 0xFFE0001C +#define SCF0_BASE SCSMR1 + +/* SCIF */ +#define SCSMR2 0xFFE80000 +#define SCBRR2 0xFFE80004 +#define SCSCR2 0xFFE80008 +#define SCFTDR2 0xFFE8000C +#define SCFSR2 0xFFE80010 +#define SCFRDR2 0xFFE80014 +#define SCFCR2 0xFFE80018 +#define SCFDR2 0xFFE8001C +#define SCSPTR2 0xFFE80020 +#define SCLSR2 0xFFE80024 +#define SCIF1_BASE SCSMR2 + +/* H-UDI */ +#define SDIR 0xFFF00000 +#define SDDR 0xFFF00008 +#define SDINT 0xFFF00014 + +#endif /* _ASM_CPU_SH7750_H_ */ diff --git a/include/asm-sh/errno.h b/include/asm-sh/errno.h new file mode 100644 index 0000000000..0d2c618030 --- /dev/null +++ b/include/asm-sh/errno.h @@ -0,0 +1,156 @@ +/* + * U-boot - errno.h Error number defines + * + * Copyright (c) 2005-2007 Analog Devices Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _BLACKFIN_ERRNO_H +#define _BLACKFIN_ERRNO_H + +#define EPERM 1 /* Operation not permitted */ +#define ENOENT 2 /* No such file or directory */ +#define ESRCH 3 /* No such process */ +#define EINTR 4 /* Interrupted system call */ +#define EIO 5 /* I/O error */ +#define ENXIO 6 /* No such device or address */ +#define E2BIG 7 /* Arg list too long */ +#define ENOEXEC 8 /* Exec format error */ +#define EBADF 9 /* Bad file number */ +#define ECHILD 10 /* No child processes */ +#define EAGAIN 11 /* Try again */ +#define ENOMEM 12 /* Out of memory */ +#define EACCES 13 /* Permission denied */ +#define EFAULT 14 /* Bad address */ +#define ENOTBLK 15 /* Block device required */ +#define EBUSY 16 /* Device or resource busy */ +#define EEXIST 17 /* File exists */ +#define EXDEV 18 /* Cross-device link */ +#define ENODEV 19 /* No such device */ +#define ENOTDIR 20 /* Not a directory */ +#define EISDIR 21 /* Is a directory */ +#define EINVAL 22 /* Invalid argument */ +#define ENFILE 23 /* File table overflow */ +#define EMFILE 24 /* Too many open files */ +#define ENOTTY 25 /* Not a typewriter */ +#define ETXTBSY 26 /* Text file busy */ +#define EFBIG 27 /* File too large */ +#define ENOSPC 28 /* No space left on device */ +#define ESPIPE 29 /* Illegal seek */ +#define EROFS 30 /* Read-only file system */ +#define EMLINK 31 /* Too many links */ +#define EPIPE 32 /* Broken pipe */ +#define EDOM 33 /* Math argument out of domain of func */ +#define ERANGE 34 /* Math result not representable */ +#define EDEADLK 35 /* Resource deadlock would occur */ +#define ENAMETOOLONG 36 /* File name too long */ +#define ENOLCK 37 /* No record locks available */ +#define ENOSYS 38 /* Function not implemented */ +#define ENOTEMPTY 39 /* Directory not empty */ +#define ELOOP 40 /* Too many symbolic links encountered */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define ENOMSG 42 /* No message of desired type */ +#define EIDRM 43 /* Identifier removed */ +#define ECHRNG 44 /* Channel number out of range */ +#define EL2NSYNC 45 /* Level 2 not synchronized */ +#define EL3HLT 46 /* Level 3 halted */ +#define EL3RST 47 /* Level 3 reset */ +#define ELNRNG 48 /* Link number out of range */ +#define EUNATCH 49 /* Protocol driver not attached */ +#define ENOCSI 50 /* No CSI structure available */ +#define EL2HLT 51 /* Level 2 halted */ +#define EBADE 52 /* Invalid exchange */ +#define EBADR 53 /* Invalid request descriptor */ +#define EXFULL 54 /* Exchange full */ +#define ENOANO 55 /* No anode */ +#define EBADRQC 56 /* Invalid request code */ +#define EBADSLT 57 /* Invalid slot */ + +#define EDEADLOCK EDEADLK + +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EMULTIHOP 72 /* Multihop attempted */ +#define EDOTDOT 73 /* RFS specific error */ +#define EBADMSG 74 /* Not a data message */ +#define EOVERFLOW 75 /* Value too large for defined data type */ +#define ENOTUNIQ 76 /* Name not unique on network */ +#define EBADFD 77 /* File descriptor in bad state */ +#define EREMCHG 78 /* Remote address changed */ +#define ELIBACC 79 /* Can not access a needed shared library */ +#define ELIBBAD 80 /* Accessing a corrupted shared library */ +#define ELIBSCN 81 /* .lib section in a.out corrupted */ +#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 83 /* Cannot exec a shared library directly */ +#define EILSEQ 84 /* Illegal byte sequence */ +#define ERESTART 85 /* Interrupted system call should be restarted */ +#define ESTRPIPE 86 /* Streams pipe error */ +#define EUSERS 87 /* Too many users */ +#define ENOTSOCK 88 /* Socket operation on non-socket */ +#define EDESTADDRREQ 89 /* Destination address required */ +#define EMSGSIZE 90 /* Message too long */ +#define EPROTOTYPE 91 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 92 /* Protocol not available */ +#define EPROTONOSUPPORT 93 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ +#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 96 /* Protocol family not supported */ +#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ +#define EADDRINUSE 98 /* Address already in use */ +#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ +#define ENETDOWN 100 /* Network is down */ +#define ENETUNREACH 101 /* Network is unreachable */ +#define ENETRESET 102 /* Network dropped connection because of reset */ +#define ECONNABORTED 103 /* Software caused connection abort */ +#define ECONNRESET 104 /* Connection reset by peer */ +#define ENOBUFS 105 /* No buffer space available */ +#define EISCONN 106 /* Transport endpoint is already connected */ +#define ENOTCONN 107 /* Transport endpoint is not connected */ +#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 109 /* Too many references: cannot splice */ +#define ETIMEDOUT 110 /* Connection timed out */ +#define ECONNREFUSED 111 /* Connection refused */ +#define EHOSTDOWN 112 /* Host is down */ +#define EHOSTUNREACH 113 /* No route to host */ +#define EALREADY 114 /* Operation already in progress */ +#define EINPROGRESS 115 /* Operation now in progress */ +#define ESTALE 116 /* Stale NFS file handle */ +#define EUCLEAN 117 /* Structure needs cleaning */ +#define ENOTNAM 118 /* Not a XENIX named type file */ +#define ENAVAIL 119 /* No XENIX semaphores available */ +#define EISNAM 120 /* Is a named type file */ +#define EREMOTEIO 121 /* Remote I/O error */ +#define EDQUOT 122 /* Quota exceeded */ + +#define ENOMEDIUM 123 /* No medium found */ +#define EMEDIUMTYPE 124 /* Wrong medium type */ + +#endif diff --git a/include/asm-sh/global_data.h b/include/asm-sh/global_data.h new file mode 100644 index 0000000000..0a44a34cef --- /dev/null +++ b/include/asm-sh/global_data.h @@ -0,0 +1,50 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2007 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_SH_GLOBALDATA_H_ +#define __ASM_SH_GLOBALDATA_H_ + +typedef struct global_data +{ + bd_t *bd; + unsigned long flags; + unsigned long baudrate; + unsigned long cpu_clk; /* CPU clock in Hz! */ + unsigned long have_console; /* serial_init() was called */ + unsigned long ram_size; /* RAM size */ + unsigned long reloc_off; /* Relocation Offset */ + unsigned long env_addr; /* Address of Environment struct */ + unsigned long env_valid; /* Checksum of Environment valid */ + void **jt; /* Standalone app jump table */ +}gd_t; + +#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ +#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ +#define GD_FLG_SILENT 0x00004 /* Silent mode */ + +#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm ("r13") + +#endif /* __ASM_SH_GLOBALDATA_H_ */ diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h new file mode 100644 index 0000000000..03427ad33b --- /dev/null +++ b/include/asm-sh/io.h @@ -0,0 +1,231 @@ +/* + * linux/include/asm-sh/io.h + * + * Copyright (C) 1996-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 16-Sep-1996 RMK Inlined the inx/outx functions & optimised for both + * constant addresses and variable addresses. + * 04-Dec-1997 RMK Moved a lot of this stuff to the new architecture + * specific IO header files. + * 27-Mar-1999 PJB Second parameter of memcpy_toio is const.. + * 04-Apr-1999 PJB Added check_signature. + * 12-Dec-1999 RMK More cleanups + * 18-Jun-2000 RMK Removed virt_to_* and friends definitions + */ +#ifndef __ASM_SH_IO_H +#define __ASM_SH_IO_H + +#ifdef __KERNEL__ + +#include <linux/types.h> +#include <asm/byteorder.h> + +/* + * Generic virtual read/write. Note that we don't support half-word + * read/writes. We define __arch_*[bl] here, and leave __arch_*w + * to the architecture specific code. + */ +#define __arch_getb(a) (*(volatile unsigned char *)(a)) +#define __arch_getw(a) (*(volatile unsigned short *)(a)) +#define __arch_getl(a) (*(volatile unsigned int *)(a)) + +#define __arch_putb(v,a) (*(volatile unsigned char *)(a) = (v)) +#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v)) +#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) + +extern void __raw_writesb(unsigned int addr, const void *data, int bytelen); +extern void __raw_writesw(unsigned int addr, const void *data, int wordlen); +extern void __raw_writesl(unsigned int addr, const void *data, int longlen); + +extern void __raw_readsb(unsigned int addr, void *data, int bytelen); +extern void __raw_readsw(unsigned int addr, void *data, int wordlen); +extern void __raw_readsl(unsigned int addr, void *data, int longlen); + +#define __raw_writeb(v,a) __arch_putb(v,a) +#define __raw_writew(v,a) __arch_putw(v,a) +#define __raw_writel(v,a) __arch_putl(v,a) + +#define __raw_readb(a) __arch_getb(a) +#define __raw_readw(a) __arch_getw(a) +#define __raw_readl(a) __arch_getl(a) + +/* + * The compiler seems to be incapable of optimising constants + * properly. Spell it out to the compiler in some cases. + * These are only valid for small values of "off" (< 1<<12) + */ +#define __raw_base_writeb(val,base,off) __arch_base_putb(val,base,off) +#define __raw_base_writew(val,base,off) __arch_base_putw(val,base,off) +#define __raw_base_writel(val,base,off) __arch_base_putl(val,base,off) + +#define __raw_base_readb(base,off) __arch_base_getb(base,off) +#define __raw_base_readw(base,off) __arch_base_getw(base,off) +#define __raw_base_readl(base,off) __arch_base_getl(base,off) + +/* + * Now, pick up the machine-defined IO definitions + */ +#if 0 /* XXX###XXX */ +#include <asm/arch/io.h> +#endif /* XXX###XXX */ + +/* + * IO port access primitives + * ------------------------- + * + * The SH doesn't have special IO access instructions; all IO is memory + * mapped. Note that these are defined to perform little endian accesses + * only. Their primary purpose is to access PCI and ISA peripherals. + * + * The machine specific io.h include defines __io to translate an "IO" + * address to a memory address. + * + * Note that we prevent GCC re-ordering or caching values in expressions + * by introducing sequence points into the in*() definitions. Note that + * __raw_* do not guarantee this behaviour. + * + * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. + */ +#define outb(v,p) __raw_writeb(v, p) +#define outw(v,p) __raw_writew(cpu_to_le16(v),p) +#define outl(v,p) __raw_writel(cpu_to_le32(v),p) + +#define inb(p) ({ unsigned int __v = __raw_readb(p); __v; }) +#define inw(p) ({ unsigned int __v = __le16_to_cpu(__raw_readw(p)); __v; }) +#define inl(p) ({ unsigned int __v = __le32_to_cpu(__raw_readl(p)); __v; }) + +#define outsb(p,d,l) __raw_writesb(p,d,l) +#define outsw(p,d,l) __raw_writesw(p,d,l) +#define outsl(p,d,l) __raw_writesl(p,d,l) + +#define insb(p,d,l) __raw_readsb(p,d,l) +#define insw(p,d,l) __raw_readsw(p,d,l) +#define insl(p,d,l) __raw_readsl(p,d,l) + +#define outb_p(val,port) outb((val),(port)) +#define outw_p(val,port) outw((val),(port)) +#define outl_p(val,port) outl((val),(port)) +#define inb_p(port) inb((port)) +#define inw_p(port) inw((port)) +#define inl_p(port) inl((port)) + +#define outsb_p(port,from,len) outsb(port,from,len) +#define outsw_p(port,from,len) outsw(port,from,len) +#define outsl_p(port,from,len) outsl(port,from,len) +#define insb_p(port,to,len) insb(port,to,len) +#define insw_p(port,to,len) insw(port,to,len) +#define insl_p(port,to,len) insl(port,to,len) + +/* + * ioremap and friends. + * + * ioremap takes a PCI memory address, as specified in + * linux/Documentation/IO-mapping.txt. If you want a + * physical address, use __ioremap instead. + */ +extern void * __ioremap(unsigned long offset, size_t size, unsigned long flags); +extern void __iounmap(void *addr); + +/* + * Generic ioremap support. + * + * Define: + * iomem_valid_addr(off,size) + * iomem_to_phys(off) + */ +#ifdef iomem_valid_addr +#define __arch_ioremap(off,sz,nocache) \ + ({ \ + unsigned long _off = (off), _size = (sz); \ + void *_ret = (void *)0; \ + if (iomem_valid_addr(_off, _size)) \ + _ret = __ioremap(iomem_to_phys(_off),_size,0); \ + _ret; \ + }) + +#define __arch_iounmap __iounmap +#endif + +#define ioremap(off,sz) __arch_ioremap((off),(sz),0) +#define ioremap_nocache(off,sz) __arch_ioremap((off),(sz),1) +#define iounmap(_addr) __arch_iounmap(_addr) + +/* + * DMA-consistent mapping functions. These allocate/free a region of + * uncached, unwrite-buffered mapped memory space for use with DMA + * devices. This is the "generic" version. The PCI specific version + * is in pci.h + */ +extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle); +extern void consistent_free(void *vaddr, size_t size, dma_addr_t handle); +extern void consistent_sync(void *vaddr, size_t size, int rw); + +/* + * String version of IO memory access ops: + */ +extern void _memcpy_fromio(void *, unsigned long, size_t); +extern void _memcpy_toio(unsigned long, const void *, size_t); +extern void _memset_io(unsigned long, int, size_t); + +/* + * If this architecture has PCI memory IO, then define the read/write + * macros. These should only be used with the cookie passed from + * ioremap. + */ +#ifdef __mem_pci + +#define readb(c) ({ unsigned int __v = __raw_readb(__mem_pci(c)); __v; }) +#define readw(c) ({ unsigned int __v = le16_to_cpu(__raw_readw(__mem_pci(c))); __v; }) +#define readl(c) ({ unsigned int __v = le32_to_cpu(__raw_readl(__mem_pci(c))); __v; }) + +#define writeb(v,c) __raw_writeb(v,__mem_pci(c)) +#define writew(v,c) __raw_writew(cpu_to_le16(v),__mem_pci(c)) +#define writel(v,c) __raw_writel(cpu_to_le32(v),__mem_pci(c)) + +#define memset_io(c,v,l) _memset_io(__mem_pci(c),(v),(l)) +#define memcpy_fromio(a,c,l) _memcpy_fromio((a),__mem_pci(c),(l)) +#define memcpy_toio(c,a,l) _memcpy_toio(__mem_pci(c),(a),(l)) + +#define eth_io_copy_and_sum(s,c,l,b) \ + eth_copy_and_sum((s),__mem_pci(c),(l),(b)) + +static inline int +check_signature(unsigned long io_addr, const unsigned char *signature, + int length) +{ + int retval = 0; + do { + if (readb(io_addr) != *signature) + goto out; + io_addr++; + signature++; + length--; + } while (length); + retval = 1; +out: + return retval; +} + +#elif !defined(readb) + +#define readb(addr) __raw_readb(addr) +#define readw(addr) __raw_readw(addr) +#define readl(addr) __raw_readl(addr) +#define writeb(v,addr) __raw_writeb(v, addr) +#define writew(v,addr) __raw_writew(v, addr) +#define writel(v,addr) __raw_writel(v, addr) + +#define check_signature(io,sig,len) (0) + +#endif /* __mem_pci */ + +static inline void sync(void) +{ +} +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_IO_H */ diff --git a/include/asm-sh/irqflags.h b/include/asm-sh/irqflags.h new file mode 100644 index 0000000000..830e5486ac --- /dev/null +++ b/include/asm-sh/irqflags.h @@ -0,0 +1,126 @@ +#ifndef __ASM_SH_IRQFLAGS_H +#define __ASM_SH_IRQFLAGS_H + +static inline void raw_local_irq_enable(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %1, %0\n\t" +#ifdef CONFIG_CPU_HAS_SR_RB + "stc r6_bank, %1\n\t" + "or %1, %0\n\t" +#endif + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x000000f0) + : "memory" + ); +} + +static inline void raw_local_irq_disable(void) +{ + unsigned long flags; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "or #0xf0, %0\n\t" + "ldc %0, sr\n\t" + : "=&z" (flags) + : /* no inputs */ + : "memory" + ); +} + +static inline void set_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "or %2, %0\n\t" + "and %3, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "r" (0x10000000), "r" (0xffffff0f) + : "memory" + ); +} + +static inline void clear_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %2, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x10000000) + : "memory" + ); +} + +static inline unsigned long __raw_local_save_flags(void) +{ + unsigned long flags; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and #0xf0, %0\n\t" + : "=&z" (flags) + : /* no inputs */ + : "memory" + ); + + return flags; +} + +#define raw_local_save_flags(flags) \ + do { (flags) = __raw_local_save_flags(); } while (0) + +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ + return (flags != 0); +} + +static inline int raw_irqs_disabled(void) +{ + unsigned long flags = __raw_local_save_flags(); + + return raw_irqs_disabled_flags(flags); +} + +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long flags, __dummy; + + __asm__ __volatile__ ( + "stc sr, %1\n\t" + "mov %1, %0\n\t" + "or #0xf0, %0\n\t" + "ldc %0, sr\n\t" + "mov %1, %0\n\t" + "and #0xf0, %0\n\t" + : "=&z" (flags), "=&r" (__dummy) + : /* no inputs */ + : "memory" + ); + + return flags; +} + +#define raw_local_irq_save(flags) \ + do { (flags) = __raw_local_irq_save(); } while (0) + +#define local_irq_save raw_local_irq_save + +static inline void raw_local_irq_restore(unsigned long flags) +{ + if ((flags & 0xf0) != 0xf0) + raw_local_irq_enable(); +} +#define local_irq_restore raw_local_irq_restore + +#endif /* __ASM_SH_IRQFLAGS_H */ diff --git a/include/asm-sh/posix_types.h b/include/asm-sh/posix_types.h new file mode 100644 index 0000000000..c9d9fb84f1 --- /dev/null +++ b/include/asm-sh/posix_types.h @@ -0,0 +1,123 @@ +#ifndef __ASM_SH_POSIX_TYPES_H +#define __ASM_SH_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned short __kernel_dev_t; +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* __ASM_SH_POSIX_TYPES_H */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h new file mode 100644 index 0000000000..bb9a35f643 --- /dev/null +++ b/include/asm-sh/processor.h @@ -0,0 +1,8 @@ +#ifndef _ASM_SH_PROCESSOR_H_ +#define _ASM_SH_PROCESSOR_H_ +#if defined CONFIG_SH3 +# include <asm/cpu_sh3.h> +#elif defined (CONFIG_SH4) +# include <asm/cpu_sh4.h> +#endif +#endif diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h new file mode 100644 index 0000000000..14cc1aca63 --- /dev/null +++ b/include/asm-sh/ptrace.h @@ -0,0 +1,112 @@ +#ifndef __ASM_SH_PTRACE_H +#define __ASM_SH_PTRACE_H + +/* + * Copyright (C) 1999, 2000 Niibe Yutaka + * from linux kernel code. + */ + +/* + * GCC defines register number like this: + * ----------------------------- + * 0 - 15 are integer registers + * 17 - 22 are control/special registers + * 24 - 39 fp registers + * 40 - 47 xd registers + * 48 - fpscr register + * ----------------------------- + * + * We follows above, except: + * 16 --- program counter (PC) + * 22 --- syscall # + * 23 --- floating point communication register + */ +#define REG_REG0 0 +#define REG_REG15 15 + +#define REG_PC 16 + +#define REG_PR 17 +#define REG_SR 18 +#define REG_GBR 19 +#define REG_MACH 20 +#define REG_MACL 21 + +#define REG_SYSCALL 22 + +#define REG_FPREG0 23 +#define REG_FPREG15 38 +#define REG_XFREG0 39 +#define REG_XFREG15 54 + +#define REG_FPSCR 55 +#define REG_FPUL 56 + +/* options set using PTRACE_SETOPTIONS */ +#define PTRACE_O_TRACESYSGOOD 0x00000001 + +/* + * This struct defines the way the registers are stored on the + * kernel stack during a system call or other kernel entry. + */ +struct pt_regs { + unsigned long regs[16]; + unsigned long pc; + unsigned long pr; + unsigned long sr; + unsigned long gbr; + unsigned long mach; + unsigned long macl; + long tra; +}; + +/* + * This struct defines the way the DSP registers are stored on the + * kernel stack during a system call or other kernel entry. + */ +struct pt_dspregs { + unsigned long a1; + unsigned long a0g; + unsigned long a1g; + unsigned long m0; + unsigned long m1; + unsigned long a0; + unsigned long x0; + unsigned long x1; + unsigned long y0; + unsigned long y1; + unsigned long dsr; + unsigned long rs; + unsigned long re; + unsigned long mod; +}; + +#define PTRACE_GETDSPREGS 55 +#define PTRACE_SETDSPREGS 56 + +#ifdef __KERNEL__ +#define user_mode(regs) (((regs)->sr & 0x40000000)==0) +#define instruction_pointer(regs) ((regs)->pc) +extern void show_regs(struct pt_regs *); + +#ifdef CONFIG_SH_DSP +#define task_pt_regs(task) \ + ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ + - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1) +#else +#define task_pt_regs(task) \ + ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ + - sizeof(unsigned long)) - 1) +#endif + +static inline unsigned long profile_pc(struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + + if (pc >= 0xa0000000UL && pc < 0xc0000000UL) + pc -= 0x20000000; + return pc; +} +#endif + +#endif /* __ASM_SH_PTRACE_H */ diff --git a/include/asm-sh/string.h b/include/asm-sh/string.h new file mode 100644 index 0000000000..27d981b79a --- /dev/null +++ b/include/asm-sh/string.h @@ -0,0 +1,162 @@ +#ifndef __ASM_SH_STRING_H +#define __ASM_SH_STRING_H + +/* + * Copyright (C) 1999 Niibe Yutaka + * But consider these trivial functions to be public domain. + * + * from linux kernel code. + */ + +#ifdef __KERNEL__ /* only set these up for kernel code */ + +#define __HAVE_ARCH_STRCPY +static inline char *strcpy(char *__dest, const char *__src) +{ + register char *__xdest = __dest; + unsigned long __dummy; + + __asm__ __volatile__("1:\n\t" + "mov.b @%1+, %2\n\t" + "mov.b %2, @%0\n\t" + "cmp/eq #0, %2\n\t" + "bf/s 1b\n\t" + " add #1, %0\n\t" + : "=r" (__dest), "=r" (__src), "=&z" (__dummy) + : "0" (__dest), "1" (__src) + : "memory", "t"); + + return __xdest; +} + +#define __HAVE_ARCH_STRNCPY +static inline char *strncpy(char *__dest, const char *__src, size_t __n) +{ + register char *__xdest = __dest; + unsigned long __dummy; + + if (__n == 0) + return __xdest; + + __asm__ __volatile__( + "1:\n" + "mov.b @%1+, %2\n\t" + "mov.b %2, @%0\n\t" + "cmp/eq #0, %2\n\t" + "bt/s 2f\n\t" + " cmp/eq %5,%1\n\t" + "bf/s 1b\n\t" + " add #1, %0\n" + "2:" + : "=r" (__dest), "=r" (__src), "=&z" (__dummy) + : "0" (__dest), "1" (__src), "r" (__src+__n) + : "memory", "t"); + + return __xdest; +} + +#define __HAVE_ARCH_STRCMP +static inline int strcmp(const char *__cs, const char *__ct) +{ + register int __res; + unsigned long __dummy; + + __asm__ __volatile__( + "mov.b @%1+, %3\n" + "1:\n\t" + "mov.b @%0+, %2\n\t" + "cmp/eq #0, %3\n\t" + "bt 2f\n\t" + "cmp/eq %2, %3\n\t" + "bt/s 1b\n\t" + " mov.b @%1+, %3\n\t" + "add #-2, %1\n\t" + "mov.b @%1, %3\n\t" + "sub %3, %2\n" + "2:" + : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) + : "0" (__cs), "1" (__ct) + : "t"); + + return __res; +} + +#define __HAVE_ARCH_STRNCMP +static inline int strncmp(const char *__cs, const char *__ct, size_t __n) +{ + register int __res; + unsigned long __dummy; + + if (__n == 0) + return 0; + + __asm__ __volatile__( + "mov.b @%1+, %3\n" + "1:\n\t" + "mov.b @%0+, %2\n\t" + "cmp/eq %6, %0\n\t" + "bt/s 2f\n\t" + " cmp/eq #0, %3\n\t" + "bt/s 3f\n\t" + " cmp/eq %3, %2\n\t" + "bt/s 1b\n\t" + " mov.b @%1+, %3\n\t" + "add #-2, %1\n\t" + "mov.b @%1, %3\n" + "2:\n\t" + "sub %3, %2\n" + "3:" + :"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) + : "0" (__cs), "1" (__ct), "r" (__cs+__n) + : "t"); + + return __res; +} + +#undef __HAVE_ARCH_MEMSET +extern void *memset(void *__s, int __c, size_t __count); + +#undef __HAVE_ARCH_MEMCPY +extern void *memcpy(void *__to, __const__ void *__from, size_t __n); + +#undef __HAVE_ARCH_MEMMOVE +extern void *memmove(void *__dest, __const__ void *__src, size_t __n); + +#undef __HAVE_ARCH_MEMCHR +extern void *memchr(const void *__s, int __c, size_t __n); + +#undef __HAVE_ARCH_STRLEN +extern size_t strlen(const char *); + +/* arch/sh/lib/strcasecmp.c */ +extern int strcasecmp(const char *, const char *); + +#else /* KERNEL */ + +/* + * let user libraries deal with these, + * IMHO the kernel has no place defining these functions for user apps + */ + +#define __HAVE_ARCH_STRCPY 1 +#define __HAVE_ARCH_STRNCPY 1 +#define __HAVE_ARCH_STRCAT 1 +#define __HAVE_ARCH_STRNCAT 1 +#define __HAVE_ARCH_STRCMP 1 +#define __HAVE_ARCH_STRNCMP 1 +#define __HAVE_ARCH_STRNICMP 1 +#define __HAVE_ARCH_STRCHR 1 +#define __HAVE_ARCH_STRRCHR 1 +#define __HAVE_ARCH_STRSTR 1 +#define __HAVE_ARCH_STRLEN 1 +#define __HAVE_ARCH_STRNLEN 1 +#define __HAVE_ARCH_MEMSET 1 +#define __HAVE_ARCH_MEMCPY 1 +#define __HAVE_ARCH_MEMMOVE 1 +#define __HAVE_ARCH_MEMSCAN 1 +#define __HAVE_ARCH_MEMCMP 1 +#define __HAVE_ARCH_MEMCHR 1 +#define __HAVE_ARCH_STRTOK 1 + +#endif /* KERNEL */ +#endif /* __ASM_SH_STRING_H */ diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h new file mode 100644 index 0000000000..b353bc5c3b --- /dev/null +++ b/include/asm-sh/system.h @@ -0,0 +1,275 @@ +#ifndef __ASM_SH_SYSTEM_H +#define __ASM_SH_SYSTEM_H + +/* + * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima + * Copyright (C) 2002 Paul Mundt + * + * from linux kernel code. + */ + +#include <linux/irqflags.h> +#include <asm/types.h> + +/* + * switch_to() should switch tasks to task nr n, first + */ + +#define switch_to(prev, next, last) do { \ + struct task_struct *__last; \ + register unsigned long *__ts1 __asm__ ("r1") = &prev->thread.sp; \ + register unsigned long *__ts2 __asm__ ("r2") = &prev->thread.pc; \ + register unsigned long *__ts4 __asm__ ("r4") = (unsigned long *)prev; \ + register unsigned long *__ts5 __asm__ ("r5") = (unsigned long *)next; \ + register unsigned long *__ts6 __asm__ ("r6") = &next->thread.sp; \ + register unsigned long __ts7 __asm__ ("r7") = next->thread.pc; \ + __asm__ __volatile__ (".balign 4\n\t" \ + "stc.l gbr, @-r15\n\t" \ + "sts.l pr, @-r15\n\t" \ + "mov.l r8, @-r15\n\t" \ + "mov.l r9, @-r15\n\t" \ + "mov.l r10, @-r15\n\t" \ + "mov.l r11, @-r15\n\t" \ + "mov.l r12, @-r15\n\t" \ + "mov.l r13, @-r15\n\t" \ + "mov.l r14, @-r15\n\t" \ + "mov.l r15, @r1 ! save SP\n\t" \ + "mov.l @r6, r15 ! change to new stack\n\t" \ + "mova 1f, %0\n\t" \ + "mov.l %0, @r2 ! save PC\n\t" \ + "mov.l 2f, %0\n\t" \ + "jmp @%0 ! call __switch_to\n\t" \ + " lds r7, pr ! with return to new PC\n\t" \ + ".balign 4\n" \ + "2:\n\t" \ + ".long __switch_to\n" \ + "1:\n\t" \ + "mov.l @r15+, r14\n\t" \ + "mov.l @r15+, r13\n\t" \ + "mov.l @r15+, r12\n\t" \ + "mov.l @r15+, r11\n\t" \ + "mov.l @r15+, r10\n\t" \ + "mov.l @r15+, r9\n\t" \ + "mov.l @r15+, r8\n\t" \ + "lds.l @r15+, pr\n\t" \ + "ldc.l @r15+, gbr\n\t" \ + : "=z" (__last) \ + : "r" (__ts1), "r" (__ts2), "r" (__ts4), \ + "r" (__ts5), "r" (__ts6), "r" (__ts7) \ + : "r3", "t"); \ + last = __last; \ +} while (0) + +/* + * On SMP systems, when the scheduler does migration-cost autodetection, + * it needs a way to flush as much of the CPU's caches as possible. + * + * TODO: fill this in! + */ +static inline void sched_cacheflush(void) +{ +} + +#ifdef CONFIG_CPU_SH4A +#define __icbi() \ +{ \ + unsigned long __addr; \ + __addr = 0xa8000000; \ + __asm__ __volatile__( \ + "icbi %0\n\t" \ + : /* no output */ \ + : "m" (__m(__addr))); \ +} +#endif + +static inline unsigned long tas(volatile int *m) +{ + unsigned long retval; + + __asm__ __volatile__ ("tas.b @%1\n\t" + "movt %0" + : "=r" (retval): "r" (m): "t", "memory"); + return retval; +} + +/* + * A brief note on ctrl_barrier(), the control register write barrier. + * + * Legacy SH cores typically require a sequence of 8 nops after + * modification of a control register in order for the changes to take + * effect. On newer cores (like the sh4a and sh5) this is accomplished + * with icbi. + * + * Also note that on sh4a in the icbi case we can forego a synco for the + * write barrier, as it's not necessary for control registers. + * + * Historically we have only done this type of barrier for the MMUCR, but + * it's also necessary for the CCR, so we make it generic here instead. + */ +#ifdef CONFIG_CPU_SH4A +#define mb() __asm__ __volatile__ ("synco": : :"memory") +#define rmb() mb() +#define wmb() __asm__ __volatile__ ("synco": : :"memory") +#define ctrl_barrier() __icbi() +#define read_barrier_depends() do { } while(0) +#else +#define mb() __asm__ __volatile__ ("": : :"memory") +#define rmb() mb() +#define wmb() __asm__ __volatile__ ("": : :"memory") +#define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop") +#define read_barrier_depends() do { } while(0) +#endif + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) +#endif + +#define set_mb(var, value) do { xchg(&var, value); } while (0) + +/* + * Jump to P2 area. + * When handling TLB or caches, we need to do it from P2 area. + */ +#define jump_to_P2() \ +do { \ + unsigned long __dummy; \ + __asm__ __volatile__( \ + "mov.l 1f, %0\n\t" \ + "or %1, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1: .long 2f\n" \ + "2:" \ + : "=&r" (__dummy) \ + : "r" (0x20000000)); \ +} while (0) + +/* + * Back to P1 area. + */ +#define back_to_P1() \ +do { \ + unsigned long __dummy; \ + ctrl_barrier(); \ + __asm__ __volatile__( \ + "mov.l 1f, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1: .long 2f\n" \ + "2:" \ + : "=&r" (__dummy)); \ +} while (0) + +static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) +{ + unsigned long flags, retval; + + local_irq_save(flags); + retval = *m; + *m = val; + local_irq_restore(flags); + return retval; +} + +static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) +{ + unsigned long flags, retval; + + local_irq_save(flags); + retval = *m; + *m = val & 0xff; + local_irq_restore(flags); + return retval; +} + +extern void __xchg_called_with_bad_pointer(void); + +#define __xchg(ptr, x, size) \ +({ \ + unsigned long __xchg__res; \ + volatile void *__xchg_ptr = (ptr); \ + switch (size) { \ + case 4: \ + __xchg__res = xchg_u32(__xchg_ptr, x); \ + break; \ + case 1: \ + __xchg__res = xchg_u8(__xchg_ptr, x); \ + break; \ + default: \ + __xchg_called_with_bad_pointer(); \ + __xchg__res = x; \ + break; \ + } \ + \ + __xchg__res; \ +}) + +#define xchg(ptr,x) \ + ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr)))) + +static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old, + unsigned long new) +{ + __u32 retval; + unsigned long flags; + + local_irq_save(flags); + retval = *m; + if (retval == old) + *m = new; + local_irq_restore(flags); /* implies memory barrier */ + return retval; +} + +/* This function doesn't exist, so you'll get a linker error + * if something tries to do an invalid cmpxchg(). */ +extern void __cmpxchg_called_with_bad_pointer(void); + +#define __HAVE_ARCH_CMPXCHG 1 + +static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32(ptr, old, new); + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +#define cmpxchg(ptr,o,n) \ + ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ + }) + +extern void *set_exception_table_vec(unsigned int vec, void *handler); + +static inline void *set_exception_table_evt(unsigned int evt, void *handler) +{ + return set_exception_table_vec(evt >> 5, handler); +} + +/* XXX + * disable hlt during certain critical i/o operations + */ +#define HAVE_DISABLE_HLT +void disable_hlt(void); +void enable_hlt(void); + +#define arch_align_stack(x) (x) + +#endif diff --git a/include/asm-sh/types.h b/include/asm-sh/types.h new file mode 100644 index 0000000000..fd00dbb82f --- /dev/null +++ b/include/asm-sh/types.h @@ -0,0 +1,59 @@ +#ifndef __ASM_SH_TYPES_H +#define __ASM_SH_TYPES_H + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +typedef __signed__ long long __s64; +typedef unsigned long long __u64; +#endif + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + + +typedef __signed__ char s8; +typedef unsigned char u8; + +typedef __signed__ short s16; +typedef unsigned short u16; + +typedef __signed__ int s32; +typedef unsigned int u32; + +typedef __signed__ long long s64; +typedef unsigned long long u64; + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_TYPES_H */ diff --git a/include/asm-sh/u-boot.h b/include/asm-sh/u-boot.h new file mode 100644 index 0000000000..b79644cfd2 --- /dev/null +++ b/include/asm-sh/u-boot.h @@ -0,0 +1,42 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + ******************************************************************** + * NOTE: This header file defines an interface to U-Boot. Including + * this (unmodified) header file in another file is considered normal + * use of U-Boot, and does *not* fall under the heading of "derived + * work". + ******************************************************************** + */ + +#ifndef __ASM_SH_U_BOOT_H_ +#define __ASM_SH_U_BOOT_H_ + +typedef struct bd_info { + unsigned long bi_memstart; /* start of DRAM memory */ + unsigned long bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ + unsigned long bi_sramstart; /* start of SRAM memory */ + unsigned long bi_sramsize; /* size of SRAM memory */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned char bi_enetaddr[6]; /* Ethernet adress */ + unsigned long bi_baudrate; /* Console Baudrate */ + unsigned long bi_boot_params; /* where this board expects params */ +} bd_t; + +#endif diff --git a/include/common.h b/include/common.h index edd00247eb..493417f877 100644 --- a/include/common.h +++ b/include/common.h @@ -129,20 +129,21 @@ typedef void (interrupt_handler_t)(void *); /* * enable common handling for all TQM8xxL/M boards: - * - CONFIG_TQM8xxM will be defined for all TQM8xxM and TQM885D boards + * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards + * and for the TQM885D board */ #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \ defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \ - defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) || \ - defined(CONFIG_TQM885D) + defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) # ifndef CONFIG_TQM8xxM # define CONFIG_TQM8xxM # endif #endif #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \ defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \ - defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) + defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \ + defined(CONFIG_TQM885D) # ifndef CONFIG_TQM8xxL # define CONFIG_TQM8xxL # endif @@ -497,6 +498,7 @@ ulong get_bus_freq (ulong); #if defined(CONFIG_MPC85xx) typedef MPC85xx_SYS_INFO sys_info_t; void get_sys_info ( sys_info_t * ); +ulong get_ddr_freq (ulong); #endif #if defined(CONFIG_MPC86xx) typedef MPC86xx_SYS_INFO sys_info_t; diff --git a/include/configs/HMI10.h b/include/configs/HMI10.h index 02ae5d005d..f8b026212d 100644 --- a/include/configs/HMI10.h +++ b/include/configs/HMI10.h @@ -224,11 +224,15 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index be603ac117..35e1d63066 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -298,13 +298,9 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8540@0" -#define OF_SOC "soc8540@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8540@e0000000/serial@4500" +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 #define CFG_64BIT_VSPRINTF 1 #define CFG_64BIT_STRTOUL 1 @@ -424,6 +420,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C +#define CONFIG_CMD_ELF #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -441,6 +438,7 @@ * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 8dda6651ef..d2e7237895 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -309,14 +309,9 @@ extern unsigned long get_clock_freq(void); #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8541@0" -#define OF_SOC "soc8541@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8541@e0000000/serial@4600" -#define OF_PCI "pci@e0008000" +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* * I2C @@ -422,6 +417,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII +#define CONFIG_CMD_ELF #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -434,6 +430,7 @@ extern unsigned long get_clock_freq(void); * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 13e2a2c079..545a76cc62 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -40,6 +40,7 @@ #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE @@ -251,13 +252,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8544@0" -#define OF_SOC "soc8544@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8544@e0000000/serial@4500" +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* I2C */ #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ @@ -410,6 +407,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII +#define CONFIG_CMD_ELF #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -426,6 +424,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) @@ -475,10 +474,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ETHADDR 00:E0:0C:02:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD -#define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD -#define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD #endif #define CONFIG_IPADDR 192.168.1.251 @@ -488,8 +483,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_BOOTFILE 8544ds/uImage.uboot #define CONFIG_UBOOTPATH 8544ds/u-boot.bin /* TFTP server */ -#define CONFIG_SERVERIP 192.168.0.1 -#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 #define CONFIG_NETMASK 255.255.0.0 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ @@ -499,65 +494,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_BAUDRATE 115200 -#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3) -#define PCIE_ENV \ - "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \ - "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \ - "pcieerr=md ${a}020 1; md ${a}e00 e;" \ - "pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ - "pci d.w $b.0 56 1;" \ - "pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \ - "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff;" \ - "pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff;" \ - "pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \ - "pci w $b.0 130 ffffffff\0" \ - "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \ - "pcie1regs=setenv a e000a; run pciereg\0" \ - "pcie2regs=setenv a e0009; run pciereg\0" \ - "pcie3regs=setenv a e000b; run pciereg\0" \ - "pcie1cfg=setenv b 3; run pciecfg\0" \ - "pcie2cfg=setenv b 5; run pciecfg\0" \ - "pcie3cfg=setenv b 0; run pciecfg\0" \ - "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \ - "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0" \ - "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0" \ - "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" \ - "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0" \ - "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0" -#else -#define PCIE_ENV "" -#endif - -#if defined(CONFIG_PCI1) -#define PCI_ENV \ - "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \ - "echo e;md ${a}e00 9\0" \ - "pci1regs=setenv a e0008; run pcireg\0" \ - "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ - "pci d.w $b.0 56 1\0" \ - "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \ - "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" \ - "pci1err=setenv a e0008; setenv b 7; run pcierr\0" \ - "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0" -#else -#define PCI_ENV "" -#endif - -#if defined(CONFIG_TSEC_ENET) -#define ENET_ENV \ - "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \ - "md ${a}098 2\0" \ - "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \ - "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \ - "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \ - "echo mib;md ${a}680 31\0" \ - "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \ - "enet1regs=setenv a e0024; run enetreg\0" \ - "enet3regs=setenv a e0026; run enetreg\0" -#else -#define ENET_ENV "" -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ @@ -570,29 +506,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ "ramdiskfile=8544ds/ramdisk.uboot\0" \ - "dtbaddr=c00000\0" \ - "dtbfile=8544ds/mpc8544ds.dtb\0" \ - "bdev=sda3\0" \ - "eoi=mw e00400b0 0\0" \ - "iack=md e00400a0 1\0" \ - "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \ - "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \ - "ddrregs=setenv a e0002; run ddrreg\0" \ - "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \ - "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \ - "guregs=setenv a e00e0; run gureg\0" \ - "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \ - "ecmregs=setenv a e0001; run ecmreg\0" \ - "lawregs=md e0000c08 4b\0" \ - "lbcregs=md e0005000 36\0" \ - "dma0regs=md e0021100 12\0" \ - "dma1regs=md e0021180 12\0" \ - "dma2regs=md e0021200 12\0" \ - "dma3regs=md e0021280 12\0" \ - PCIE_ENV \ - PCI_ENV \ - ENET_ENV - + "fdtaddr=c00000\0" \ + "fdtfile=8544ds/mpc8544ds.dtb\0" \ + "bdev=sda3\0" #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ @@ -600,23 +516,22 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr - $dtbaddr" - + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr $ramdiskaddr $dtbaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" #define CONFIG_BOOTCOMMAND \ "setenv bootargs root=/dev/$bdev rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr - $dtbaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 4edc7fd2b6..3f382e59a6 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -42,6 +42,7 @@ #undef CONFIG_RIO #undef CONFIG_PCI2 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE @@ -333,14 +334,9 @@ extern unsigned long get_clock_freq(void); #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8548@0" -#define OF_SOC "soc8548@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8548@e0000000/serial@4600" -#define OF_PCI "pci@e0008000" +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* * I2C @@ -483,6 +479,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII +#define CONFIG_CMD_ELF #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -495,6 +492,7 @@ extern unsigned long get_clock_freq(void); * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) @@ -568,72 +566,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BAUDRATE 115200 -#if defined(CONFIG_PCIE1) -#define PCIE_ENV \ - "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \ - "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \ - "pcieerr=md ${a}020 1; md ${a}e00 e; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ - "pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;" \ - "pci d $b.0 130 1\0" \ - "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;" \ - "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;"\ - "pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0" \ - "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \ - "pcie1regs=setenv a e000a; run pciereg\0" \ - "pcie1cfg=setenv b 3; run pciecfg\0" \ - "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \ - "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" -#else -#define PCIE_ENV "" -#endif - -#if defined(CONFIG_PCI1) || defined(CONFIG_PCI2) -#define PCI_ENV \ - "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \ - "echo e;md ${a}e00 9\0" \ - "pcierr=md ${a}e00 8; pci d.b $b.0 7 1;pci d.w $b.0 1e 1;" \ - "pci d.w $b.0 56 1\0" \ - "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \ - "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" -#else -#define PCI_ENV "" -#endif - -#if defined(CONFIG_PCI1) -#define PCI_ENV1 \ - "pci1regs=setenv a e0008; run pcireg\0" \ - "pci1err=setenv a e0008; setenv b 0; run pcierr\0" \ - "pci1errc=setenv a e0008; setenv b 0; run pcierrc\0" -#else -#define PCI_ENV1 "" -#endif - -#if defined(CONFIG_PCI2) -#define PCI_ENV2 \ - "pci2regs=setenv a e0009; run pcireg\0" \ - "pci2err=setenv a e0009; setenv b 123; run pcierr\0" \ - "pci2errc=setenv a e0009; setenv b 123; run pcierrc\0" -#else -#define PCI_ENV2 "" -#endif - -#if defined(CONFIG_TSEC_ENET) -#define ENET_ENV \ - "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \ - "md ${a}098 2\0" \ - "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \ - "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \ - "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \ - "echo mib;md ${a}680 31\0" \ - "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \ - "enet1regs=setenv a e0024; run enetreg\0" \ - "enet2regs=setenv a e0025; run enetreg\0" \ - "enet3regs=setenv a e0026; run enetreg\0" \ - "enet4regs=setenv a e0027; run enetreg\0" -#else -#define ENET_ENV "" -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ @@ -647,28 +579,7 @@ extern unsigned long get_clock_freq(void); "ramdiskaddr=2000000\0" \ "ramdiskfile=ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ - "fdtfile=mpc8548cds.dtb\0" \ - "eoi=mw e00400b0 0\0" \ - "iack=md e00400a0 1\0" \ - "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \ - "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \ - "ddrregs=setenv a e0002; run ddrreg\0" \ - "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \ - "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \ - "guregs=setenv a e00e0; run gureg\0" \ - "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \ - "ecmregs=setenv a e0001; run ecmreg\0" \ - "lawregs=md e0000c08 4b\0" \ - "lbcregs=md e0005000 36\0" \ - "dma0regs=md e0021100 12\0" \ - "dma1regs=md e0021180 12\0" \ - "dma2regs=md e0021200 12\0" \ - "dma3regs=md e0021280 12\0" \ - PCIE_ENV \ - PCI_ENV \ - PCI_ENV1 \ - PCI_ENV2 \ - ENET_ENV + "fdtfile=mpc8548cds.dtb\0" #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index c414bf033e..90ef3d6b67 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -309,14 +309,9 @@ extern unsigned long get_clock_freq(void); #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8555@0" -#define OF_SOC "soc8555@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8555@e0000000/serial@4600" -#define OF_PCI "pci@e0008000" +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* * I2C @@ -422,6 +417,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII +#define CONFIG_CMD_ELF #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -434,6 +430,7 @@ extern unsigned long get_clock_freq(void); * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index a8f362fa13..d4e0de0d32 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -289,13 +289,9 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8560@0" -#define OF_SOC "soc8560@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8560@e0000000/serial@4500" +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* * I2C @@ -450,6 +446,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C +#define CONFIG_CMD_ELF #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -471,6 +468,7 @@ * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CFG_LOAD_ADDR 0x1000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ @@ -525,6 +523,8 @@ #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD +#define CONFIG_HAS_ETH3 +#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index b9366cc994..59f490e856 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -33,7 +33,11 @@ #define CONFIG_MPC8568 1 /* MPC8568 specific */ #define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */ -#define CONFIG_PCI +#define CONFIG_PCI 1 /* Enable PCI/PCIE */ +#define CONFIG_PCI1 1 /* PCI controller */ +#define CONFIG_PCIE1 1 /* PCIE controller */ +#define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */ +#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_QE /* Enable QE */ #define CONFIG_ENV_OVERWRITE @@ -87,6 +91,9 @@ extern unsigned long get_clock_freq(void); #define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ +#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) +#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000) + /* * DDR Setup */ @@ -290,14 +297,9 @@ extern unsigned long get_clock_freq(void); #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8568@0" -#define OF_SOC "soc8568@e0000000" -#define OF_QE "qe@e0080000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4500" +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* * I2C @@ -325,12 +327,12 @@ extern unsigned long get_clock_freq(void); #define CFG_PCI1_IO_PHYS 0xe2000000 #define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */ -#define CFG_PEX_MEM_BASE 0xa0000000 -#define CFG_PEX_MEM_PHYS CFG_PEX_MEM_BASE -#define CFG_PEX_MEM_SIZE 0x10000000 /* 256M */ -#define CFG_PEX_IO_BASE 0x00000000 -#define CFG_PEX_IO_PHYS 0xe2800000 -#define CFG_PEX_IO_SIZE 0x00800000 /* 8M */ +#define CFG_PCIE1_MEM_BASE 0xa0000000 +#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE +#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCIE1_IO_BASE 0x00000000 +#define CFG_PCIE1_IO_PHYS 0xe2800000 +#define CFG_PCIE1_IO_SIZE 0x00800000 /* 8M */ #define CFG_SRIO_MEM_BASE 0xc0000000 @@ -383,6 +385,11 @@ extern unsigned long get_clock_freq(void); #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ +/* PCI view of System Memory */ +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x80000000 + #endif /* CONFIG_PCI */ #ifndef CONFIG_NET_MULTI @@ -440,6 +447,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII +#define CONFIG_CMD_ELF #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -452,6 +460,7 @@ extern unsigned long get_clock_freq(void); * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index 1c6a9ae4f1..ae8d9abac1 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -335,7 +335,7 @@ #else #define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ #endif /* CONFIG_TQM5200_B */ -#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ +#define CFG_MALLOC_LEN (1024 << 10) /* Reserve 1024 kB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* @@ -392,6 +392,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 7a3801026f..be5b4d3f58 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -192,11 +192,15 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index e8b6a80b19..a0c01b65a1 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -188,15 +188,19 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment */ #define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index beeca6343e..f51b12e303 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -179,11 +179,15 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index d5609c1d48..a725e71ca2 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -177,15 +177,19 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment */ #define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index e35b5b2ac1..16dc3ebe92 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -183,11 +183,15 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index cd5212eff8..c4b459952a 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -217,15 +217,19 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment */ #define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index d5838dbf37..ac22c1e8b4 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -186,11 +186,15 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index fe3a2f020c..8601de1722 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -189,11 +189,14 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ @@ -368,7 +371,7 @@ */ #define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */ #define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ +#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB per bank */ /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ #define CFG_OR_TIMING_SDRAM 0x00000A00 @@ -444,7 +447,10 @@ #define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - +/* 10 column SDRAM */ +#define CFG_MAMR_10COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) /* * Internal Definitions diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index f09d3d1654..2bf4a2a357 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -186,14 +186,17 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ #define CFG_ENV_IS_IN_FLASH 1 - #define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 039aa3af42..d42ffc9da2 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -186,16 +186,19 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ #define CFG_ENV_IS_IN_FLASH 1 - #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment */ #define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index ca3c166524..d7e5eebae7 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -232,11 +232,14 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index f36b729cd5..8a3aa4bc4b 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -42,17 +42,10 @@ #define CONFIG_8xx_OSCLK 10000000 /* 10 MHz - PLL input clock */ #define CFG_8xx_CPUCLK_MIN 15000000 /* 15 MHz - CPU minimum clock */ #define CFG_8xx_CPUCLK_MAX 133000000 /* 133 MHz - CPU maximum clock */ -#define CONFIG_8xx_CPUCLK_DEFAULT 66000000 /* 50 MHz - CPU default clock */ +#define CONFIG_8xx_CPUCLK_DEFAULT 66000000 /* 66 MHz - CPU default clock */ /* (it will be used if there is no */ /* 'cpuclk' variable with valid value) */ -#define CFG_MEASURE_CPUCLK /* Measure real cpu clock */ - /* (function measure_gclk() */ - /* will be called) */ -#ifdef CFG_MEASURE_CPUCLK -#define CFG_8XX_XIN 10000000 /* measure_gclk() needs this */ -#endif - #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ @@ -83,9 +76,15 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ - "bootfile=/tftpboot/TQM866M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "bootfile=/tftpboot/TQM885D/uImage\0" \ + "fdt_addr=400C0000\0" \ + "kernel_addr=40100000\0" \ + "ramdisk_addr=40280000\0" \ + "load=tftp 200000 ${u-boot}\0" \ + "update=protect off 40000000 +${filesize};" \ + "erase 40000000 +${filesize};" \ + "cp.b 200000 40000000 ${filesize};" \ + "protect on 40000000 +${filesize}\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -144,7 +143,7 @@ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -#undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */ +#undef CONFIG_RTC_MPC8xx /* MPC885 does not support RTC */ #define CONFIG_TIMESTAMP /* but print image timestmps */ @@ -230,7 +229,7 @@ #define CFG_FLASH_BASE 0x40000000 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 128 kB for malloc() */ /* * For booting Linux, the board info and command line data @@ -242,16 +241,20 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ -#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment */ +#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) @@ -434,26 +437,30 @@ #define CFG_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64)) /* - * Memory Periodic Timer Prescaler - * Periodic timer for refresh, start with refresh rate for 40 MHz clock - * (CFG_8xx_CPUCLK_MIN / CFG_PTA_PER_CLK) + * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad) + * + * CPUclock(MHz) * 31.2 + * CFG_MAMR_PTA = ----------------------------------- with DFBRG = 0 + * 2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16 + * + * CPU clock = 15 MHz: CFG_MAMR_PTA = 29 -> 4 * 7.73 us + * CPU clock = 50 MHz: CFG_MAMR_PTA = 97 -> 4 * 7.76 us + * CPU clock = 66 MHz: CFG_MAMR_PTA = 128 -> 4 * 7.75 us + * CPU clock = 133 MHz: CFG_MAMR_PTA = 255 -> 4 * 7.67 us + * + * Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will + * be met also in the default configuration, i.e. if environment variable + * 'cpuclk' is not set. */ -#define CFG_MAMR_PTA 39 +#define CFG_MAMR_PTA 128 /* - * For 16 MBit, refresh rates could be 31.3 us - * (= 64 ms / 2K = 125 / quad bursts). - * For a simpler initialization, 15.6 us is used instead. - * - * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks - * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank + * Memory Periodic Timer Prescaler Register (MPTPR) values. */ -#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ +/* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */ +#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 +/* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */ +#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* * MAMR settings for SDRAM diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h new file mode 100644 index 0000000000..194788b18d --- /dev/null +++ b/include/configs/atstk1003.h @@ -0,0 +1,184 @@ +/* + * Copyright (C) 2007 Atmel Corporation + * + * Configuration settings for the ATSTK1003 CPU daughterboard + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_AVR32 1 +#define CONFIG_AT32AP 1 +#define CONFIG_AT32AP7001 1 +#define CONFIG_ATSTK1003 1 +#define CONFIG_ATSTK1000 1 + +#define CONFIG_ATSTK1000_EXT_FLASH 1 + +/* + * Timer clock frequency. We're using the CPU-internal COUNT register + * for this, so this is equivalent to the CPU core clock frequency + */ +#define CFG_HZ 1000 + +/* + * Set up the PLL to run at 140 MHz, the CPU to run at the PLL + * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the + * PLL frequency. + * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz + */ +#define CONFIG_PLL 1 +#define CFG_POWER_MANAGER 1 +#define CFG_OSC0_HZ 20000000 +#define CFG_PLL0_DIV 1 +#define CFG_PLL0_MUL 7 +#define CFG_PLL0_SUPPRESS_CYCLES 16 +/* + * Set the CPU running at: + * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz + */ +#define CFG_CLKDIV_CPU 0 +/* + * Set the HSB running at: + * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz + */ +#define CFG_CLKDIV_HSB 1 +/* + * Set the PBA running at: + * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz + */ +#define CFG_CLKDIV_PBA 2 +/* + * Set the PBB running at: + * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz + */ +#define CFG_CLKDIV_PBB 1 + +/* + * The PLLOPT register controls the PLL like this: + * icp = PLLOPT<2> + * ivco = PLLOPT<1:0> + * + * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). + */ +#define CFG_PLL0_OPT 0x04 + +#undef CONFIG_USART0 +#define CONFIG_USART1 1 +#undef CONFIG_USART2 +#undef CONFIG_USART3 + +/* User serviceable stuff */ +#define CONFIG_DOS_PARTITION 1 + +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_STACKSIZE (2048) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "console=ttyS0 root=/dev/mmcblk0p1 rootwait" + +#define CONFIG_BOOTCOMMAND \ + "mmcinit; ext2load mmc 0:1 0x10400000 /boot/uImage; bootm" + +/* + * Only interrupt autoboot if <space> is pressed. Otherwise, garbage + * data on the serial line may interrupt the boot sequence. + */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_AUTOBOOT 1 +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + +#define CONFIG_ATMEL_USART 1 +#define CONFIG_PIO2 1 +#define CFG_HSDRAMC 1 +#define CONFIG_MMC 1 + +#define CFG_DCACHE_LINESZ 32 +#define CFG_ICACHE_LINESZ 32 + +#define CONFIG_NR_DRAM_BANKS 1 + +/* External flash on STK1000 */ +#if 0 +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#endif + +#define CFG_FLASH_BASE 0x00000000 +#define CFG_FLASH_SIZE 0x800000 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 135 + +#define CFG_MONITOR_BASE CFG_FLASH_BASE + +#define CFG_INTRAM_BASE 0x24000000 +#define CFG_INTRAM_SIZE 0x8000 + +#define CFG_SDRAM_BASE 0x10000000 + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 65536 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE) + +#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE) + +#define CFG_MALLOC_LEN (256*1024) + +/* Allow 4MB for the kernel run-time image */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000) +#define CFG_BOOTPARAMS_LEN (16 * 1024) + +/* Other configuration settings that shouldn't have to change all that often */ +#define CFG_PROMPT "Uboot> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000) +#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } + +#endif /* __CONFIG_H */ diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h new file mode 100644 index 0000000000..1bad171cbf --- /dev/null +++ b/include/configs/atstk1004.h @@ -0,0 +1,185 @@ +/* + * Copyright (C) 2007 Atmel Corporation + * + * Configuration settings for the ATSTK1003 CPU daughterboard + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_AVR32 1 +#define CONFIG_AT32AP 1 +#define CONFIG_AT32AP7002 1 +#define CONFIG_ATSTK1004 1 +#define CONFIG_ATSTK1000 1 + +#define CONFIG_ATSTK1000_EXT_FLASH 1 + +/* + * Timer clock frequency. We're using the CPU-internal COUNT register + * for this, so this is equivalent to the CPU core clock frequency + */ +#define CFG_HZ 1000 + +/* + * Set up the PLL to run at 140 MHz, the CPU to run at the PLL + * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the + * PLL frequency. + * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz + */ +#define CONFIG_PLL 1 +#define CFG_POWER_MANAGER 1 +#define CFG_OSC0_HZ 20000000 +#define CFG_PLL0_DIV 1 +#define CFG_PLL0_MUL 7 +#define CFG_PLL0_SUPPRESS_CYCLES 16 +/* + * Set the CPU running at: + * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz + */ +#define CFG_CLKDIV_CPU 0 +/* + * Set the HSB running at: + * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz + */ +#define CFG_CLKDIV_HSB 1 +/* + * Set the PBA running at: + * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz + */ +#define CFG_CLKDIV_PBA 2 +/* + * Set the PBB running at: + * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz + */ +#define CFG_CLKDIV_PBB 1 + +/* + * The PLLOPT register controls the PLL like this: + * icp = PLLOPT<2> + * ivco = PLLOPT<1:0> + * + * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). + */ +#define CFG_PLL0_OPT 0x04 + +#undef CONFIG_USART0 +#define CONFIG_USART1 1 +#undef CONFIG_USART2 +#undef CONFIG_USART3 + +/* User serviceable stuff */ +#define CONFIG_DOS_PARTITION 1 + +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_STACKSIZE (2048) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "console=ttyS0 root=/dev/mmcblk0p1 rootwait" + +#define CONFIG_BOOTCOMMAND \ + "mmcinit; ext2load mmc 0:1 0x10200000 /boot/uImage; bootm" + +/* + * Only interrupt autoboot if <space> is pressed. Otherwise, garbage + * data on the serial line may interrupt the boot sequence. + */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_AUTOBOOT 1 +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + +#define CONFIG_ATMEL_USART 1 +#define CONFIG_PIO2 1 +#define CFG_HSDRAMC 1 +#define CONFIG_MMC 1 + +#define CFG_DCACHE_LINESZ 32 +#define CFG_ICACHE_LINESZ 32 + +#define CONFIG_NR_DRAM_BANKS 1 + +/* External flash on STK1000 */ +#if 0 +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#endif + +#define CFG_FLASH_BASE 0x00000000 +#define CFG_FLASH_SIZE 0x800000 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 135 + +#define CFG_MONITOR_BASE CFG_FLASH_BASE + +#define CFG_INTRAM_BASE 0x24000000 +#define CFG_INTRAM_SIZE 0x8000 + +#define CFG_SDRAM_BASE 0x10000000 +#define CFG_SDRAM_16BIT 1 + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 65536 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE) + +#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE) + +#define CFG_MALLOC_LEN (256*1024) + +/* Allow 4MB for the kernel run-time image */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000) +#define CFG_BOOTPARAMS_LEN (16 * 1024) + +/* Other configuration settings that shouldn't have to change all that often */ +#define CFG_PROMPT "Uboot> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000) +#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } + +#endif /* __CONFIG_H */ diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h new file mode 100644 index 0000000000..ae0d018515 --- /dev/null +++ b/include/configs/ms7722se.h @@ -0,0 +1,136 @@ +/* + * Configuation settings for the Hitachi Solution Engine 7722 + * + * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MS7722SE_H +#define __MS7722SE_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7722 1 +#define CONFIG_MS7722SE 1 + +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DFL +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_ENV + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.0.22 +#define CONFIG_SERVERIP 192.168.0.1 +#define CONFIG_GATEWAYIP 192.168.0.1 + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +/* SMC9111 */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE (0xB8000000) + +/* MEMORY */ +#define MS7722SE_SDRAM_BASE (0x8C000000) +#define MS7722SE_FLASH_BASE_1 (0xA0000000) +#define MS7722SE_FLASH_BANK_SIZE (8*1024 * 1024) + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Buffer size for input from the Console */ +#define CFG_PBSIZE 256 /* Buffer size for Console output */ +#define CFG_MAXARGS 16 /* max args accepted for monitor commands */ +#define CFG_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */ +#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ + +/* SCIF */ +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF0 1 +#undef CFG_CONSOLE_INFO_QUIET /* Suppress display of console information at boot */ +#undef CFG_CONSOLE_OVERWRITE_ROUTINE +#undef CFG_CONSOLE_ENV_OVERWRITE + +#define CFG_MEMTEST_START (MS7722SE_SDRAM_BASE) +#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024)) + +#undef CFG_ALT_MEMTEST /* Enable alternate, more extensive, memory test */ +#undef CFG_MEMTEST_SCRATCH /* Scratch address used by the alternate memory test */ + +#undef CFG_LOADS_BAUD_CHANGE /* Enable temporary baudrate change while serial download */ + +#define CFG_SDRAM_BASE (MS7722SE_SDRAM_BASE) +#define CFG_SDRAM_SIZE (64 * 1024 * 1024) /* maybe more, but if so u-boot doesn't know about it... */ + +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) /* default load address for scripts ?!? */ + +#define CFG_MONITOR_BASE (MS7722SE_FLASH_BASE_1) /* Address of u-boot image + in Flash (NOT run time address in SDRAM) ?!? */ +#define CFG_MONITOR_LEN (128 * 1024) /* */ +#define CFG_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ +#define CFG_GBL_DATA_SIZE (256) /* size in bytes reserved for initial data */ +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#undef CFG_FLASH_QUIET_TEST +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ + +#define CFG_FLASH_BASE (MS7722SE_FLASH_BASE_1) /* Physical start address of Flash memory */ + +#define CFG_MAX_FLASH_SECT 150 /* Max number of sectors on each + Flash chip */ + +/* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */ +#define CFG_MAX_FLASH_BANKS 2 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \ + CFG_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \ + } + +#define CFG_FLASH_ERASE_TOUT (3 * 1000) /* Timeout for Flash erase operations (in ms) */ +#define CFG_FLASH_WRITE_TOUT (3 * 1000) /* Timeout for Flash write operations (in ms) */ +#define CFG_FLASH_LOCK_TOUT (3 * 1000) /* Timeout for Flash set sector lock bit operations (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT (3 * 1000) /* Timeout for Flash clear lock bit operations (in ms) */ + +#undef CFG_FLASH_PROTECTION /* Use hardware flash sectors protection instead of U-Boot software protection */ + +#undef CFG_DIRECT_FLASH_TFTP + +#define CFG_ENV_IS_IN_FLASH +#define CONFIG_ENV_OVERWRITE 1 +#define CFG_ENV_SECT_SIZE (8 * 1024) +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + (1 * CFG_ENV_SECT_SIZE)) +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) /* Offset of env Flash sector relative to CFG_FLASH_BASE */ +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR_REDUND (CFG_FLASH_BASE + (2 * CFG_ENV_SECT_SIZE)) + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 33333333 +#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +#endif /* __MS7722SE_H */ diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h new file mode 100644 index 0000000000..36681568f8 --- /dev/null +++ b/include/configs/ms7750se.h @@ -0,0 +1,108 @@ +/* + * Configuation settings for the Hitachi Solution Engine 7750 + * + * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MS7750SE_H +#define __MS7750SE_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7750 1 +/* #define CONFIG_CPU_SH7751 1 */ +/* #define CONFIG_CPU_TYPE_R 1 */ +#define CONFIG_MS7750SE 1 +#define __LITTLE_ENDIAN__ 1 + +/* + * Command line configuration. + */ +/*#include <config_cmd_default.h>*/ + +#define CONFIG_CMD_DFL +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_ENV + +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_BAUDRATE 38400 +#define CONFIG_CONS_SCIF1 1 +#define BOARD_LATE_INIT 1 + +#define CONFIG_BOOTDELAY -1 +#define CONFIG_BOOTARGS "console=ttySC0,38400" +#define CONFIG_ENV_OVERWRITE 1 + +/* SDRAM */ +#define CFG_SDRAM_BASE (0x8C000000) +#define CFG_SDRAM_SIZE (64 * 1024 * 1024) + +#define CFG_LONGHELP +#define CFG_PROMPT "=> " +#define CFG_CBSIZE 256 +#define CFG_PBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE 512 +/* List of legal baudrate settings for this board */ +#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } + +#define CFG_MEMTEST_START (CFG_SDRAM_BASE) +#define CFG_MEMTEST_END (TEXT_BASE - 0x100000) + +/* NOR Flash */ +/* #define CFG_FLASH_BASE (0xA1000000)*/ +#define CFG_FLASH_BASE (0xA0000000) +#define CFG_MAX_FLASH_BANKS (1) /* Max number of + * Flash memory banks + */ +#define CFG_MAX_FLASH_SECT 142 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) +#define CFG_MONITOR_BASE (CFG_FLASH_BASE) /* Address of u-boot image in Flash */ +#define CFG_MONITOR_LEN (128 * 1024) +#define CFG_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ + +#define CFG_GBL_DATA_SIZE (256) /* size in bytes reserved for initial data */ +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) +#define CFG_RX_ETH_BUFFER (8) + +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#undef CFG_FLASH_CFI_BROKEN_TABLE +#undef CFG_FLASH_QUIET_TEST +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ + + +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_FLASH_ERASE_TOUT 120000 +#define CFG_FLASH_WRITE_TOUT 500 + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 33333333 +#define TMU_CLK_DIVIDER 4 +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +#endif /* __MS7750SE_H */ diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index edae6f4b98..827a28f077 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -193,11 +193,15 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ diff --git a/include/e500.h b/include/e500.h index 8e3bf8cb7d..0d73260f40 100644 --- a/include/e500.h +++ b/include/e500.h @@ -12,6 +12,7 @@ typedef struct { unsigned long freqProcessor; unsigned long freqSystemBus; + unsigned long freqDDRBus; } MPC85xx_SYS_INFO; #endif /* _ASMLANGUAGE */ diff --git a/include/fdt_support.h b/include/fdt_support.h index 8f781d4405..3d6c1a841b 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -44,6 +44,7 @@ void do_fixup_by_compat(void *fdt, const char *compat, const char *prop, const void *val, int len, int create); void do_fixup_by_compat_u32(void *fdt, const char *compat, const char *prop, u32 val, int create); +int fdt_fixup_memory(void *blob, u64 start, u64 size); void fdt_fixup_ethernet(void *fdt, bd_t *bd); #ifdef CONFIG_OF_HAS_UBOOT_ENV diff --git a/include/flash.h b/include/flash.h index b0bf733f18..2ed1e20fd2 100644 --- a/include/flash.h +++ b/include/flash.h @@ -52,6 +52,9 @@ typedef struct { ushort ext_addr; /* extended query table address */ ushort cfi_version; /* cfi version */ ushort cfi_offset; /* offset for cfi query */ + ulong addr_unlock1; /* unlock address 1 for AMD flash roms */ + ulong addr_unlock2; /* unlock address 2 for AMD flash roms */ + const char *name; /* human-readable name */ #endif } flash_info_t; @@ -77,6 +80,7 @@ typedef struct { #define FLASH_CFI_X8 0x00 #define FLASH_CFI_X16 0x01 #define FLASH_CFI_X8X16 0x02 +#define FLASH_CFI_X16X32 0x05 /* convert between bit value and numeric value */ #define CFI_FLASH_SHIFT_WIDTH 3 @@ -101,6 +105,13 @@ extern void flash_read_user_serial(flash_info_t * info, void * buffer, int offse extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int offset, int len); #endif /* CFG_FLASH_PROTECTION */ +#ifdef CONFIG_FLASH_CFI_LEGACY +extern ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info); +extern int jedec_flash_match(flash_info_t *info, ulong base); +#define CFI_CMDSET_AMD_LEGACY 0xFFF0 +#endif + + /*----------------------------------------------------------------------- * return codes from flash_write(): */ diff --git a/include/ioports.h b/include/ioports.h index cfba667cab..1134ea5208 100644 --- a/include/ioports.h +++ b/include/ioports.h @@ -26,7 +26,7 @@ typedef struct { * a 0x20 byte boundary */ #ifdef CONFIG_MPC85xx -#define ioport_addr(im, idx) (ioport_t *)((uint)&((im)->im_cpm.im_cpm_iop) + ((idx)*0x20)) +#define ioport_addr(im, idx) (ioport_t *)((uint)&(im->im_cpm_iop) + ((idx)*0x20)) #else #define ioport_addr(im, idx) (ioport_t *)((uint)&(im)->im_ioport + ((idx)*0x20)) #endif |