diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/baltos.h | 13 | ||||
| -rw-r--r-- | include/configs/pengwyn.h | 7 | ||||
| -rw-r--r-- | include/configs/porter.h | 8 | ||||
| -rw-r--r-- | include/configs/stout.h | 57 |
4 files changed, 21 insertions, 64 deletions
diff --git a/include/configs/baltos.h b/include/configs/baltos.h index 19db35052e..03559bd4f5 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -229,11 +229,6 @@ /* SPL */ #ifndef CONFIG_NOR_BOOT -/* USB gadget RNDIS */ - -/* General network SPL, both CPSW and USB gadget RNDIS */ -#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"*/ - #ifdef CONFIG_NAND #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ @@ -271,14 +266,6 @@ #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_OTG -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USB_ETHER) -/* disable host part of MUSB in SPL */ -/* disable EFI partitions and partition UUID support */ -/* - * Disable CPSW SPL support so we fit within the 101KiB limit. - */ -#endif - /* Network. */ #define CONFIG_PHY_SMSC #define CONFIG_MII diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 545f859e85..863b6e7eb4 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -165,16 +165,9 @@ #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST -#if defined(CONFIG_SPL_BUILD) -/* disable host part of MUSB in SPL */ -/* Disable CPSW SPL support so we fit within the 101KiB limit. */ -#endif - /* Network */ #define CONFIG_PHY_RESET 1 #define CONFIG_PHY_NATSEMI #define CONFIG_PHY_REALTEK -/* CPSW support */ - #endif /* ! __CONFIG_PENGWYN_H */ diff --git a/include/configs/porter.h b/include/configs/porter.h index 7c46b55d8f..b1a4c2576e 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -54,13 +54,11 @@ "initrd_high=0xffffffff\0" /* SPL support */ -#define CONFIG_SPL_TEXT_BASE 0xe6304000 +#define CONFIG_SPL_TEXT_BASE 0xe6300000 #define CONFIG_SPL_STACK 0xe6340000 -#define CONFIG_SPL_MAX_SIZE 0x40000 +#define CONFIG_SPL_MAX_SIZE 0x4000 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000 - -/* TPL support */ -#ifdef CONFIG_TPL_BUILD +#ifdef CONFIG_SPL_BUILD #define CONFIG_CONS_SCIF0 #define CONFIG_SH_SCIF_CLK_FREQ 65000000 #endif diff --git a/include/configs/stout.h b/include/configs/stout.h index b81103e8a7..228cb552cb 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -17,14 +17,9 @@ #include "rcar-gen2-common.h" -/* STACK */ -#if defined(CONFIGF_RMOBILE_EXTRAM_BOOT) -#define CONFIG_SYS_INIT_SP_ADDR 0xB003FFFC -#else -#define CONFIG_SYS_INIT_SP_ADDR 0xE827FFFC -#endif -#define STACK_AREA_SIZE 0xC000 -#define LOW_LEVEL_MERAM_STACK \ +#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000 +#define STACK_AREA_SIZE 0x00100000 +#define LOW_LEVEL_MERAM_STACK \ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) /* MEMORY */ @@ -43,47 +38,31 @@ #define CONFIG_SH_ETHER_USE_PORT 0 #define CONFIG_SH_ETHER_PHY_ADDR 0x1 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII -#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 #define CONFIG_SH_ETHER_CACHE_WRITEBACK #define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 #define CONFIG_BITBANGMII #define CONFIG_BITBANGMII_MULTI -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_RCAR -#define CONFIG_SYS_RCAR_I2C0_SPEED 400000 -#define CONFIG_SYS_RCAR_I2C1_SPEED 400000 -#define CONFIG_SYS_RCAR_I2C2_SPEED 400000 -#define CONFIG_SYS_RCAR_I2C3_SPEED 400000 -#define CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS 4 - -#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ - /* Board Clock */ #define RMOBILE_XTAL_CLK 20000000u #define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK -#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */ -#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2) -#define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2) -#define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15) -#define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12) +#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) #define CONFIG_SYS_TMU_CLK_DIV 4 -/* USB */ -#define CONFIG_USB_EHCI_RMOBILE -#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 - -/* Module stop status bits */ -/* INTC-RT */ -#define CONFIG_SMSTP0_ENA 0x00400000 -/* MSIF, SCIFA0 */ -#define CONFIG_SMSTP2_ENA 0x00002010 -/* INTC-SYS, IRQC */ -#define CONFIG_SMSTP4_ENA 0x00000180 - -/* SDHI */ -#define CONFIG_SH_SDHI_FREQ 97500000 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" + +/* SPL support */ +#define CONFIG_SPL_TEXT_BASE 0xe6300000 +#define CONFIG_SPL_STACK 0xe6340000 +#define CONFIG_SPL_MAX_SIZE 0x4000 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000 +#ifdef CONFIG_SPL_BUILD +#define CONFIG_CONS_SCIFA0 +#define CONFIG_SH_SCIF_CLK_FREQ 52000000 +#endif #endif /* __STOUT_H */ |