diff options
Diffstat (limited to 'include')
40 files changed, 666 insertions, 286 deletions
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 06c5d3bd30..afaf73905b 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -98,8 +98,6 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/ -#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ - #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ @@ -111,11 +109,6 @@ #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } - #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 6b5ed484b3..2959befeb4 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -332,8 +332,6 @@ /* USB Device Firmware Update support */ #ifndef CONFIG_SPL_BUILD -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define DFU_ALT_INFO_MMC \ "dfu_alt_info_mmc=" \ "boot part 0 1;" \ @@ -348,7 +346,6 @@ "u-boot.img fat 0 1;" \ "uEnv.txt fat 0 1\0" #ifdef CONFIG_NAND -#define CONFIG_DFU_NAND #define DFU_ALT_INFO_NAND \ "dfu_alt_info_nand=" \ "SPL part 0 1;" \ @@ -362,7 +359,6 @@ #else #define DFU_ALT_INFO_NAND "" #endif -#define CONFIG_DFU_RAM #define DFU_ALT_INFO_RAM \ "dfu_alt_info_ram=" \ "kernel ram 0x80200000 0xD80000;" \ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 19ccbcbbd9..20f207c3f3 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -122,10 +122,7 @@ #ifndef CONFIG_SPL_BUILD /* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_RAM -#define CONFIG_DFU_MMC #define DFU_ALT_INFO_MMC \ "dfu_alt_info_mmc=" \ "boot part 0 1;" \ @@ -141,14 +138,12 @@ "MLO raw 0x100 0x100 mmcpart 0;" \ "u-boot.img raw 0x300 0x1000 mmcpart 0\0" -#define CONFIG_DFU_RAM #define DFU_ALT_INFO_RAM \ "dfu_alt_info_ram=" \ "kernel ram 0x80200000 0x4000000;" \ "fdt ram 0x80f80000 0x80000;" \ "ramdisk ram 0x81000000 0x4000000\0" -#define CONFIG_DFU_SF #define DFU_ALT_INFO_QSPI \ "dfu_alt_info_qspi=" \ "u-boot.bin raw 0x0 0x080000;" \ diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 82d82f49f2..0eb0c0308f 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -465,8 +465,6 @@ DEFAULT_LINUX_BOOT_ENV \ /* USB Device Firmware Update support */ #ifndef CONFIG_SPL_BUILD -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define DFU_ALT_INFO_MMC \ "dfu_alt_info_mmc=" \ "boot part 0 1;" \ @@ -481,7 +479,6 @@ DEFAULT_LINUX_BOOT_ENV \ "u-boot.img fat 0 1;" \ "uEnv.txt fat 0 1\0" #ifdef CONFIG_NAND -#define CONFIG_DFU_NAND #define DFU_ALT_INFO_NAND \ "dfu_alt_info_nand=" \ "SPL part 0 1;" \ @@ -495,7 +492,6 @@ DEFAULT_LINUX_BOOT_ENV \ #else #define DFU_ALT_INFO_NAND "" #endif -#define CONFIG_DFU_RAM #define DFU_ALT_INFO_RAM \ "dfu_alt_info_ram=" \ "kernel ram 0x80200000 0xD80000;" \ diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index 36a29f1b47..5ee83ded9e 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -81,11 +81,6 @@ #define CONFIG_USB_FUNCTION_MASS_STORAGE -/* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC -#define CONFIG_DFU_SF - #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_ANDROID_BOOT_IMAGE diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index b628d11fe9..16ae952f37 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -220,8 +220,6 @@ #define CONFIG_USB_FUNCTION_MASS_STORAGE /* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 0ee08e61d8..597eb2c430 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -216,9 +216,6 @@ #define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019 /* USB DFU */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_NAND -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024) /* USB Storage */ diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 6521ddeb16..5e6094127e 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -112,8 +112,6 @@ #define CONFIG_MTD_PARTITIONS /* DFU class support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_NAND #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) #define DFU_MANIFEST_POLL_TIMEOUT 25000 diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 0726875569..66ce82cabb 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -222,15 +222,6 @@ #define CONFIG_OMAP_USB_PHY #define CONFIG_OMAP_USB2PHY2_HOST -/* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_RAM - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_DFU_MMC -#define CONFIG_DFU_SF -#endif - /* SATA */ #define CONFIG_BOARD_LATE_INIT #define CONFIG_SCSI diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index fdbaf027ac..06fde3853c 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -29,8 +29,6 @@ #define CONFIG_CMD_THOR_DOWNLOAD #define CONFIG_USB_FUNCTION_THOR -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/mvebu_db-88f3720.h b/include/configs/mvebu_db-88f3720.h new file mode 100644 index 0000000000..e785f241f8 --- /dev/null +++ b/include/configs/mvebu_db-88f3720.h @@ -0,0 +1,144 @@ +/* + * Copyright (C) 2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_MVEBU_DB_88F3720_H +#define _CONFIG_MVEBU_DB_88F3720_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_DISPLAY_BOARDINFO_LATE +#define CONFIG_ARCH_EARLY_INIT_R + +#define CONFIG_SYS_TEXT_BASE 0x00000000 + +/* additions for new ARM relocation support */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +#define CONFIG_NR_DRAM_BANKS 1 + +/* auto boot */ +#define CONFIG_PREBOOT + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ + 115200, 230400, 460800, 921600 } + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ + +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */ + +/* + * Other required minimal configurations + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */ +#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ +#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ +#define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ + +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_ALT_MEMTEST + +/* End of 16M scrubbed by training in bootrom */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) + +/* + * I2C + */ +#define CONFIG_I2C_MV +#define CONFIG_SYS_I2C_SLAVE 0x0 + +/* + * SPI Flash configuration + */ +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_SPEED 1000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE + +/* Environment in SPI NOR flash */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ + +/* + * Ethernet Driver configuration + */ +#define CONFIG_MVNETA /* Enable Marvell Gbe Controller Driver */ +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ +#define CONFIG_PHY_GIGE /* GbE speed/duplex detect */ +#define CONFIG_ARP_TIMEOUT 200 +#define CONFIG_NET_RETRY_COUNT 50 + +/* USB 2.0 */ +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 + +/* USB 3.0 */ +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3 + +#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \ + CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) + +/* USB ethernet */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 +#define CONFIG_USB_ETHER_RTL8152 +#define CONFIG_USB_ETHER_SMSC95XX + +/* + * SATA/SCSI/AHCI configuration + */ +#define CONFIG_SCSI +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_LIBATA +#define CONFIG_LBA48 +#define CONFIG_SYS_64BIT_LBA + +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) + +#define CONFIG_SUPPORT_VFAT + +/* DISK Partition support */ +#define CONFIG_EFI_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION +#define CONFIG_ISO_PARTITION /* Experimental */ + +#define CONFIG_CMD_PART +#define CONFIG_PARTITION_UUIDS + +#endif /* _CONFIG_MVEBU_DB_88F3720_H */ diff --git a/include/configs/mvebu_db-88f7040.h b/include/configs/mvebu_db-88f7040.h new file mode 100644 index 0000000000..cfb0191e8d --- /dev/null +++ b/include/configs/mvebu_db-88f7040.h @@ -0,0 +1,133 @@ +/* + * Copyright (C) 2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_MVEBU_DB_88F7040_H +#define _CONFIG_MVEBU_DB_88F7040_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ + +#define CONFIG_DISPLAY_BOARDINFO_LATE +#define CONFIG_ARCH_EARLY_INIT_R +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_SYS_TEXT_BASE 0x00000000 + +/* additions for new ARM relocation support */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +#define CONFIG_NR_DRAM_BANKS 1 + +/* auto boot */ +#define CONFIG_PREBOOT + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ + 115200, 230400, 460800, 921600 } + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ + +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */ + +/* + * Other required minimal configurations + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */ +#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ +#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ +#define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ + +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_ALT_MEMTEST + +/* End of 16M scrubbed by training in bootrom */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) + +/* + * SPI Flash configuration + */ +#define CONFIG_KIRKWOOD_SPI +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_SPEED 1000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE + +/* Environment in SPI NOR flash */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ + +/* USB 2.0 */ +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 + +/* USB 3.0 */ +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3 + +#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \ + CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) + +/* USB ethernet */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 +#define CONFIG_USB_ETHER_RTL8152 +#define CONFIG_USB_ETHER_SMSC95XX + +/* + * SATA/SCSI/AHCI configuration + */ +#define CONFIG_SCSI +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_LIBATA +#define CONFIG_LBA48 +#define CONFIG_SYS_64BIT_LBA + +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) + +#define CONFIG_SUPPORT_VFAT + +/* DISK Partition support */ +#define CONFIG_EFI_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION +#define CONFIG_ISO_PARTITION /* Experimental */ + +#define CONFIG_CMD_PART +#define CONFIG_PARTITION_UUIDS + +#endif /* _CONFIG_MVEBU_DB_88F7040_H */ diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 1ee880d9df..7423cffaef 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -238,11 +238,6 @@ #define CONFIG_ANDROID_BOOT_IMAGE #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR #define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 - -/* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC -#define CONFIG_DFU_SF #endif #endif /* __MX6QSABRE_COMMON_CONFIG_H */ diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index f6a636d803..83f3d9548a 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -252,11 +252,6 @@ #define CONFIG_USB_FUNCTION_MASS_STORAGE -/* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC -#define CONFIG_DFU_RAM - #define CONFIG_VIDEO #ifdef CONFIG_VIDEO #define CONFIG_CFB_CONSOLE diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 0b57949f37..40b48f70ab 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -45,8 +45,6 @@ #define CONFIG_USB_EHCI_EXYNOS /* DFU */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M #define DFU_DEFAULT_POLL_TIMEOUT 300 #define DFU_MANIFEST_POLL_TIMEOUT 25000 diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index c126990c0a..22614fb9c3 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -96,12 +96,6 @@ #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79 -/* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_RAM - -#define CONFIG_DFU_MMC - /* Enabled commands */ /* USB Networking options */ diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 1c46ec33a2..ed3b64fd71 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -58,8 +58,6 @@ #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 61c5663c40..72286ddb29 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -65,8 +65,6 @@ #define CONFIG_CMD_GPT /* USB Composite download gadget - g_dnl */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index d81e1a575d..c53bd66890 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -216,8 +216,6 @@ #define CONFIG_USBD_HS /* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_NAND #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) #define DFU_MANIFEST_POLL_TIMEOUT 25000 diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 1ea41a22cb..fd557a96a9 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -166,8 +166,6 @@ #define CONFIG_USB_GADGET_AT91 /* DFU class support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_NAND #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_1M #define DFU_MANIFEST_POLL_TIMEOUT 25000 #endif diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 084874d2fd..e1faf38649 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -241,10 +241,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_USB_FUNCTION_DFU -#ifdef CONFIG_DM_MMC -#define CONFIG_DFU_MMC -#endif #define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024) #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index 8d90c914ba..c5555e6990 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -215,10 +215,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_BOARD_LATE_INIT -/* Enable DFU to SF and RAM */ -#define CONFIG_DFU_RAM -#define CONFIG_DFU_SF - /* Support changing the prompt string */ #define CONFIG_CMDLINE_PS_SUPPORT diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index deb2e8d07d..d261fb3a8c 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -332,15 +332,10 @@ extern int soft_i2c_gpio_scl; #endif #ifdef CONFIG_USB_MUSB_GADGET -#define CONFIG_USB_FUNCTION_DFU #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_USB_FUNCTION_MASS_STORAGE #endif -#ifdef CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_RAM -#endif - #ifdef CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR diff --git a/include/configs/taurus.h b/include/configs/taurus.h index af0b841e2e..1be4341e2e 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -128,8 +128,6 @@ #define CONFIG_USB_GADGET_AT91 /* DFU class support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_NAND #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) #define DFU_MANIFEST_POLL_TIMEOUT 25000 #endif diff --git a/include/configs/tegra-common-usb-gadget.h b/include/configs/tegra-common-usb-gadget.h index 3e3eeea066..00f854eb71 100644 --- a/include/configs/tegra-common-usb-gadget.h +++ b/include/configs/tegra-common-usb-gadget.h @@ -14,16 +14,8 @@ /* USB mass storage protocol */ #define CONFIG_USB_FUNCTION_MASS_STORAGE /* DFU protocol */ -#define CONFIG_USB_FUNCTION_DFU #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_1M #define CONFIG_SYS_DFU_MAX_FILE_SIZE SZ_32M -#ifdef CONFIG_MMC -#define CONFIG_DFU_MMC -#endif -#ifdef CONFIG_SPI_FLASH -#define CONFIG_DFU_SF -#endif -#define CONFIG_DFU_RAM #endif #endif /* _TEGRA_COMMON_USB_GADGET_H_ */ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 29614e0f9e..1385d316d3 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -76,11 +76,12 @@ * Increasing the size of the IO buffer as default nfsargs size is more * than 256 and so it is not possible to edit it */ -#define CONFIG_SYS_CBSIZE (256 * 2) /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE (1024 * 2) /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +#define CONFIG_SYS_MAXARGS 64 /* max number of command args */ + /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index d8a8c4a875..f039df51af 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -146,11 +146,7 @@ * we are on so we do not need to rely on the command prompt. We set a * console baudrate of 115200 and use the default baud rate table. */ -#ifdef CONFIG_DFU_MMC -#define CONFIG_SYS_MALLOC_LEN ((16 << 20) + CONFIG_SYS_DFU_DATA_BUF_SIZE) -#else -#define CONFIG_SYS_MALLOC_LEN (16 << 20) -#endif +#define CONFIG_SYS_MALLOC_LEN SZ_32M #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_BAUDRATE 115200 #define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */ @@ -230,7 +226,7 @@ #ifndef CONFIG_SYS_SPL_MALLOC_START #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN +#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_8M #endif #ifndef CONFIG_SPL_MAX_SIZE #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ diff --git a/include/configs/warp.h b/include/configs/warp.h index 66651841f6..b35b795322 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -75,8 +75,6 @@ #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 89a6fccb1e..9642dd9c4c 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -144,8 +144,6 @@ #define CONFIG_USB_FUNCTION_MASS_STORAGE /* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 5ed8beb9c2..adc42cff12 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -116,8 +116,6 @@ #define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000 #define DFU_DEFAULT_POLL_TIMEOUT 300 -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_RAM #define CONFIG_USB_CABLE_CHECK #define CONFIG_CMD_THOR_DOWNLOAD #define CONFIG_USB_FUNCTION_THOR diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 260df2f0b4..f1c9bedb1c 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -90,8 +90,6 @@ # define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x600000 # define DFU_DEFAULT_POLL_TIMEOUT 300 -# define CONFIG_USB_FUNCTION_DFU -# define CONFIG_DFU_RAM # define CONFIG_USB_CABLE_CHECK # define CONFIG_CMD_THOR_DOWNLOAD # define CONFIG_THOR_RESET_OFF @@ -106,7 +104,6 @@ "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" # if defined(CONFIG_ZYNQ_SDHCI) -# define CONFIG_DFU_MMC # define DFU_ALT_INFO_MMC \ "dfu_mmc_info=" \ "set dfu_alt_info " \ diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h index 6d0d8d8ef3..534c03f8ad 100644 --- a/include/dt-bindings/clock/tegra114-car.h +++ b/include/dt-bindings/clock/tegra114-car.h @@ -49,7 +49,7 @@ #define TEGRA114_CLK_I2S0 30 /* 31 */ -/* 32 */ +#define TEGRA114_CLK_MC 32 /* 33 */ #define TEGRA114_CLK_APBDMA 34 /* 35 */ @@ -337,6 +337,7 @@ #define TEGRA114_CLK_CLK_OUT_3_MUX 308 #define TEGRA114_CLK_DSIA_MUX 309 #define TEGRA114_CLK_DSIB_MUX 310 -#define TEGRA114_CLK_CLK_MAX 311 +#define TEGRA114_CLK_XUSB_SS_DIV2 311 +#define TEGRA114_CLK_CLK_MAX 312 #endif /* _DT_BINDINGS_CLOCK_TEGRA114_CAR_H */ diff --git a/include/dt-bindings/clock/tegra20-car.h b/include/dt-bindings/clock/tegra20-car.h index a1ae9a8fdd..04500b243a 100644 --- a/include/dt-bindings/clock/tegra20-car.h +++ b/include/dt-bindings/clock/tegra20-car.h @@ -49,7 +49,7 @@ /* 30 */ #define TEGRA20_CLK_CACHE2 31 -#define TEGRA20_CLK_MEM 32 +#define TEGRA20_CLK_MC 32 #define TEGRA20_CLK_AHBDMA 33 #define TEGRA20_CLK_APBDMA 34 /* 35 */ @@ -92,7 +92,7 @@ #define TEGRA20_CLK_OWR 71 #define TEGRA20_CLK_AFI 72 #define TEGRA20_CLK_CSITE 73 -#define TEGRA20_CLK_PCIE_XCLK 74 +/* 74 */ #define TEGRA20_CLK_AVPUCQ 75 #define TEGRA20_CLK_LA 76 /* 77 */ diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h index d134741eb5..bd3530e56d 100644 --- a/include/dt-bindings/clock/tegra210-car.h +++ b/include/dt-bindings/clock/tegra210-car.h @@ -1,6 +1,16 @@ /* - * This header provides Tegra210-specific constants for binding - * nvidia,tegra210-car. + * This header provides constants for binding nvidia,tegra210-car. + * + * The first 224 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB + * registers. These IDs often match those in the CAR's RST_DEVICES registers, + * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In + * this case, those clocks are assigned IDs above 224 in order to highlight + * this issue. Implementations that interpret these clock IDs as bit values + * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to + * explicitly handle these special cases. + * + * The balance of the clocks controlled by the CAR are assigned IDs of 224 and + * above. */ #ifndef _DT_BINDINGS_CLOCK_TEGRA210_CAR_H @@ -14,7 +24,7 @@ #define TEGRA210_CLK_TIMER 5 #define TEGRA210_CLK_UARTA 6 /* 7 (register bit affects uartb and vfir) */ -/* 8 */ +#define TEGRA210_CLK_GPIO 8 #define TEGRA210_CLK_SDMMC2 9 /* 10 (register bit affects spdif_in and spdif_out) */ #define TEGRA210_CLK_I2S1 11 @@ -25,30 +35,31 @@ /* 16 */ #define TEGRA210_CLK_PWM 17 #define TEGRA210_CLK_I2S2 18 +/* 19 */ /* 20 (register bit affects vi and vi_sensor) */ /* 21 */ #define TEGRA210_CLK_USBD 22 #define TEGRA210_CLK_ISP 23 -/* 26 */ +/* 24 */ /* 25 */ #define TEGRA210_CLK_DISP2 26 #define TEGRA210_CLK_DISP1 27 #define TEGRA210_CLK_HOST1X 28 -#define TEGRA210_CLK_VCP 29 +/* 29 */ #define TEGRA210_CLK_I2S0 30 /* 31 */ #define TEGRA210_CLK_MC 32 -/* 33 */ +#define TEGRA210_CLK_AHBDMA 33 #define TEGRA210_CLK_APBDMA 34 /* 35 */ -#define TEGRA210_CLK_KBC 36 +/* 36 */ /* 37 */ -/* 38 */ +#define TEGRA210_CLK_PMC 38 /* 39 (register bit affects fuse and fuse_burn) */ #define TEGRA210_CLK_KFUSE 40 #define TEGRA210_CLK_SBC1 41 -#define TEGRA210_CLK_NOR 42 +/* 42 */ /* 43 */ #define TEGRA210_CLK_SBC2 44 /* 45 */ @@ -56,8 +67,8 @@ #define TEGRA210_CLK_I2C5 47 #define TEGRA210_CLK_DSIA 48 /* 49 */ -#define TEGRA210_CLK_MIPI 50 -#define TEGRA210_CLK_HDMI 51 +/* 50 */ +/* 51 */ #define TEGRA210_CLK_CSI 52 /* 53 */ #define TEGRA210_CLK_I2C2 54 @@ -65,10 +76,10 @@ #define TEGRA210_CLK_MIPI_CAL 56 #define TEGRA210_CLK_EMC 57 #define TEGRA210_CLK_USB2 58 -#define TEGRA210_CLK_USB3 59 +/* 59 */ /* 60 */ -#define TEGRA210_CLK_VDE 61 -#define TEGRA210_CLK_BSEA 62 +/* 61 */ +/* 62 */ #define TEGRA210_CLK_BSEV 63 /* 64 */ @@ -83,8 +94,8 @@ #define TEGRA210_CLK_CSITE 73 /* 74 */ /* 75 */ -#define TEGRA210_CLK_LA 76 -#define TEGRA210_CLK_TRACE 77 +/* 76 */ +/* 77 */ #define TEGRA210_CLK_SOC_THERM 78 #define TEGRA210_CLK_DTV 79 /* 80 */ @@ -98,7 +109,7 @@ /* 88 */ #define TEGRA210_CLK_XUSB_HOST 89 /* 90 */ -#define TEGRA210_CLK_MSENC 91 +/* 91 */ #define TEGRA210_CLK_CSUS 92 /* 93 */ /* 94 */ @@ -112,20 +123,20 @@ #define TEGRA210_CLK_I2S3 101 #define TEGRA210_CLK_I2S4 102 #define TEGRA210_CLK_I2C4 103 -#define TEGRA210_CLK_SBC5 104 -#define TEGRA210_CLK_SBC6 105 +/* 104 */ +/* 105 */ #define TEGRA210_CLK_D_AUDIO 106 -#define TEGRA210_CLK_APBIF 107 -#define TEGRA210_CLK_DAM0 108 -#define TEGRA210_CLK_DAM1 109 -#define TEGRA210_CLK_DAM2 110 +#define TEGRA210_CLK_APB2APE 107 +/* 108 */ +/* 109 */ +/* 110 */ #define TEGRA210_CLK_HDA2CODEC_2X 111 /* 112 */ -#define TEGRA210_CLK_AUDIO0_2X 113 -#define TEGRA210_CLK_AUDIO1_2X 114 -#define TEGRA210_CLK_AUDIO2_2X 115 -#define TEGRA210_CLK_AUDIO3_2X 116 -#define TEGRA210_CLK_AUDIO4_2X 117 +/* 113 */ +/* 114 */ +/* 115 */ +/* 116 */ +/* 117 */ #define TEGRA210_CLK_SPDIF_2X 118 #define TEGRA210_CLK_ACTMON 119 #define TEGRA210_CLK_EXTERN1 120 @@ -135,10 +146,10 @@ #define TEGRA210_CLK_SATA 124 #define TEGRA210_CLK_HDA 125 /* 126 */ -#define TEGRA210_CLK_SE 127 +/* 127 */ #define TEGRA210_CLK_HDA2HDMI 128 -#define TEGRA210_CLK_SATA_COLD 129 +/* 129 */ /* 130 */ /* 131 */ /* 132 */ @@ -152,19 +163,19 @@ /* 140 */ /* 141 */ /* 142 */ -/* 143 (bit affects xusb_falcon_src, xusb_fs_src, */ -/* xusb_host_src and xusb_ss_src) */ +/* (bit affects xusb_falcon_src, xusb_fs_src, xusb_host_src and xusb_ss_src) */ +#define TEGRA210_CLK_XUSB_GATE 143 #define TEGRA210_CLK_CILAB 144 #define TEGRA210_CLK_CILCD 145 #define TEGRA210_CLK_CILE 146 #define TEGRA210_CLK_DSIALP 147 #define TEGRA210_CLK_DSIBLP 148 #define TEGRA210_CLK_ENTROPY 149 -#define TEGRA210_CLK_DDS 150 +/* 150 */ /* 151 */ -#define TEGRA210_CLK_DP2 152 -#define TEGRA210_CLK_AMX 153 -#define TEGRA210_CLK_ADX 154 +/* 152 */ +/* 153 */ +/* 154 */ /* 155 (bit affects dfll_ref and dfll_soc) */ #define TEGRA210_CLK_XUSB_SS 156 /* 157 */ @@ -172,8 +183,8 @@ /* 159 */ /* 160 */ -/* 161 */ -/* 162 */ +#define TEGRA210_CLK_DMIC1 161 +#define TEGRA210_CLK_DMIC2 162 /* 163 */ /* 164 */ /* 165 */ @@ -184,159 +195,207 @@ /* 170 */ #define TEGRA210_CLK_VIM2_CLK 171 /* 172 */ -/* 173 */ +#define TEGRA210_CLK_MIPIBIF 173 /* 174 */ /* 175 */ -#define TEGRA210_CLK_HDMI_AUDIO 176 +/* 176 */ #define TEGRA210_CLK_CLK72MHZ 177 #define TEGRA210_CLK_VIC03 178 /* 179 */ -#define TEGRA210_CLK_ADX1 180 +/* 180 */ #define TEGRA210_CLK_DPAUX 181 #define TEGRA210_CLK_SOR0 182 -/* 183 */ +#define TEGRA210_CLK_SOR1 183 #define TEGRA210_CLK_GPU 184 -#define TEGRA210_CLK_AMX1 185 +#define TEGRA210_CLK_DBGAPB 185 /* 186 */ -/* 187 */ +#define TEGRA210_CLK_PLL_P_OUT_ADSP 187 /* 188 */ -/* 189 */ +#define TEGRA210_CLK_PLL_G_REF 189 /* 190 */ /* 191 */ -#define TEGRA210_CLK_UARTB 192 -#define TEGRA210_CLK_VFIR 193 -#define TEGRA210_CLK_SPDIF_IN 194 -#define TEGRA210_CLK_SPDIF_OUT 195 -#define TEGRA210_CLK_VI 196 -#define TEGRA210_CLK_VI_SENSOR 197 -#define TEGRA210_CLK_FUSE 198 -#define TEGRA210_CLK_FUSE_BURN 199 -#define TEGRA210_CLK_CLK_32K 200 -#define TEGRA210_CLK_CLK_M 201 -#define TEGRA210_CLK_CLK_M_DIV2 202 -#define TEGRA210_CLK_CLK_M_DIV4 203 -#define TEGRA210_CLK_PLL_REF 204 -#define TEGRA210_CLK_PLL_C 205 -#define TEGRA210_CLK_PLL_C_OUT1 206 -#define TEGRA210_CLK_PLL_C2 207 -#define TEGRA210_CLK_PLL_C3 208 -#define TEGRA210_CLK_PLL_M 209 -#define TEGRA210_CLK_PLL_M_OUT1 210 -#define TEGRA210_CLK_PLL_P 211 -#define TEGRA210_CLK_PLL_P_OUT1 212 -#define TEGRA210_CLK_PLL_P_OUT2 213 -#define TEGRA210_CLK_PLL_P_OUT3 214 -#define TEGRA210_CLK_PLL_P_OUT4 215 -#define TEGRA210_CLK_PLL_A 216 -#define TEGRA210_CLK_PLL_A_OUT0 217 -#define TEGRA210_CLK_PLL_D 218 -#define TEGRA210_CLK_PLL_D_OUT0 219 -#define TEGRA210_CLK_PLL_D2 220 -#define TEGRA210_CLK_PLL_D2_OUT0 221 -#define TEGRA210_CLK_PLL_U 222 -#define TEGRA210_CLK_PLL_U_480M 223 -#define TEGRA210_CLK_PLL_U_60M 224 -#define TEGRA210_CLK_PLL_U_48M 225 -#define TEGRA210_CLK_PLL_U_12M 226 -/* 227 */ -/* 228 */ -#define TEGRA210_CLK_PLL_RE_VCO 229 -#define TEGRA210_CLK_PLL_RE_OUT 230 -#define TEGRA210_CLK_PLL_E 231 -#define TEGRA210_CLK_SPDIF_IN_SYNC 232 -#define TEGRA210_CLK_I2S0_SYNC 233 -#define TEGRA210_CLK_I2S1_SYNC 234 -#define TEGRA210_CLK_I2S2_SYNC 235 -#define TEGRA210_CLK_I2S3_SYNC 236 -#define TEGRA210_CLK_I2S4_SYNC 237 -#define TEGRA210_CLK_VIMCLK_SYNC 238 -#define TEGRA210_CLK_AUDIO0 239 -#define TEGRA210_CLK_AUDIO1 240 -#define TEGRA210_CLK_AUDIO2 241 -#define TEGRA210_CLK_AUDIO3 242 -#define TEGRA210_CLK_AUDIO4 243 -#define TEGRA210_CLK_SPDIF 244 -#define TEGRA210_CLK_CLK_OUT_1 245 -#define TEGRA210_CLK_CLK_OUT_2 246 -#define TEGRA210_CLK_CLK_OUT_3 247 -#define TEGRA210_CLK_BLINK 248 -/* 249 */ -/* 250 */ -/* 251 */ -#define TEGRA210_CLK_XUSB_HOST_SRC 252 -#define TEGRA210_CLK_XUSB_FALCON_SRC 253 -#define TEGRA210_CLK_XUSB_FS_SRC 254 -#define TEGRA210_CLK_XUSB_SS_SRC 255 +/* 192 */ +#define TEGRA210_CLK_SDMMC_LEGACY 193 +#define TEGRA210_CLK_NVDEC 194 +#define TEGRA210_CLK_NVJPG 195 +/* 196 */ +#define TEGRA210_CLK_DMIC3 197 +#define TEGRA210_CLK_APE 198 +/* 199 */ +/* 200 */ +/* 201 */ +#define TEGRA210_CLK_MAUD 202 +/* 203 */ +/* 204 */ +/* 205 */ +#define TEGRA210_CLK_TSECB 206 +#define TEGRA210_CLK_DPAUX1 207 +#define TEGRA210_CLK_VI_I2C 208 +#define TEGRA210_CLK_HSIC_TRK 209 +#define TEGRA210_CLK_USB2_TRK 210 +#define TEGRA210_CLK_QSPI 211 +#define TEGRA210_CLK_UARTAPE 212 +/* 213 */ +/* 214 */ +/* 215 */ +/* 216 */ +/* 217 */ +/* 218 */ +#define TEGRA210_CLK_NVENC 219 +/* 220 */ +/* 221 */ +#define TEGRA210_CLK_SOR_SAFE 222 +#define TEGRA210_CLK_PLL_P_OUT_CPU 223 -#define TEGRA210_CLK_XUSB_DEV_SRC 256 -#define TEGRA210_CLK_XUSB_DEV 257 -#define TEGRA210_CLK_XUSB_HS_SRC 258 -#define TEGRA210_CLK_SCLK 259 -#define TEGRA210_CLK_HCLK 260 -#define TEGRA210_CLK_PCLK 261 -/* 262 */ -/* 263 */ -#define TEGRA210_CLK_DFLL_REF 264 -#define TEGRA210_CLK_DFLL_SOC 265 -#define TEGRA210_CLK_VI_SENSOR2 266 -#define TEGRA210_CLK_PLL_P_OUT5 267 -#define TEGRA210_CLK_CML0 268 -#define TEGRA210_CLK_CML1 269 -#define TEGRA210_CLK_PLL_C4 270 -#define TEGRA210_CLK_PLL_DP 271 -#define TEGRA210_CLK_PLL_E_MUX 272 -#define TEGRA210_CLK_PLLD_DSI 273 -/* 274 */ -/* 275 */ -/* 276 */ -/* 277 */ -/* 278 */ -/* 279 */ -/* 280 */ + +#define TEGRA210_CLK_UARTB 224 +#define TEGRA210_CLK_VFIR 225 +#define TEGRA210_CLK_SPDIF_IN 226 +#define TEGRA210_CLK_SPDIF_OUT 227 +#define TEGRA210_CLK_VI 228 +#define TEGRA210_CLK_VI_SENSOR 229 +#define TEGRA210_CLK_FUSE 230 +#define TEGRA210_CLK_FUSE_BURN 231 +#define TEGRA210_CLK_CLK_32K 232 +#define TEGRA210_CLK_CLK_M 233 +#define TEGRA210_CLK_CLK_M_DIV2 234 +#define TEGRA210_CLK_CLK_M_DIV4 235 +#define TEGRA210_CLK_PLL_REF 236 +#define TEGRA210_CLK_PLL_C 237 +#define TEGRA210_CLK_PLL_C_OUT1 238 +#define TEGRA210_CLK_PLL_C2 239 +#define TEGRA210_CLK_PLL_C3 240 +#define TEGRA210_CLK_PLL_M 241 +#define TEGRA210_CLK_PLL_M_OUT1 242 +#define TEGRA210_CLK_PLL_P 243 +#define TEGRA210_CLK_PLL_P_OUT1 244 +#define TEGRA210_CLK_PLL_P_OUT2 245 +#define TEGRA210_CLK_PLL_P_OUT3 246 +#define TEGRA210_CLK_PLL_P_OUT4 247 +#define TEGRA210_CLK_PLL_A 248 +#define TEGRA210_CLK_PLL_A_OUT0 249 +#define TEGRA210_CLK_PLL_D 250 +#define TEGRA210_CLK_PLL_D_OUT0 251 +#define TEGRA210_CLK_PLL_D2 252 +#define TEGRA210_CLK_PLL_D2_OUT0 253 +#define TEGRA210_CLK_PLL_U 254 +#define TEGRA210_CLK_PLL_U_480M 255 + +#define TEGRA210_CLK_PLL_U_60M 256 +#define TEGRA210_CLK_PLL_U_48M 257 +/* 258 */ +#define TEGRA210_CLK_PLL_X 259 +#define TEGRA210_CLK_PLL_X_OUT0 260 +#define TEGRA210_CLK_PLL_RE_VCO 261 +#define TEGRA210_CLK_PLL_RE_OUT 262 +#define TEGRA210_CLK_PLL_E 263 +#define TEGRA210_CLK_SPDIF_IN_SYNC 264 +#define TEGRA210_CLK_I2S0_SYNC 265 +#define TEGRA210_CLK_I2S1_SYNC 266 +#define TEGRA210_CLK_I2S2_SYNC 267 +#define TEGRA210_CLK_I2S3_SYNC 268 +#define TEGRA210_CLK_I2S4_SYNC 269 +#define TEGRA210_CLK_VIMCLK_SYNC 270 +#define TEGRA210_CLK_AUDIO0 271 +#define TEGRA210_CLK_AUDIO1 272 +#define TEGRA210_CLK_AUDIO2 273 +#define TEGRA210_CLK_AUDIO3 274 +#define TEGRA210_CLK_AUDIO4 275 +#define TEGRA210_CLK_SPDIF 276 +#define TEGRA210_CLK_CLK_OUT_1 277 +#define TEGRA210_CLK_CLK_OUT_2 278 +#define TEGRA210_CLK_CLK_OUT_3 279 +#define TEGRA210_CLK_BLINK 280 /* 281 */ /* 282 */ /* 283 */ -/* 284 */ -/* 285 */ -/* 286 */ -/* 287 */ - -/* 288 */ -/* 289 */ -/* 290 */ -/* 291 */ -/* 292 */ -/* 293 */ -/* 294 */ -/* 295 */ -/* 296 */ -/* 297 */ -/* 298 */ -/* 299 */ -#define TEGRA210_CLK_AUDIO0_MUX 300 -#define TEGRA210_CLK_AUDIO1_MUX 301 -#define TEGRA210_CLK_AUDIO2_MUX 302 -#define TEGRA210_CLK_AUDIO3_MUX 303 -#define TEGRA210_CLK_AUDIO4_MUX 304 -#define TEGRA210_CLK_SPDIF_MUX 305 -#define TEGRA210_CLK_CLK_OUT_1_MUX 306 -#define TEGRA210_CLK_CLK_OUT_2_MUX 307 -#define TEGRA210_CLK_CLK_OUT_3_MUX 308 -/* 309 */ -/* 310 */ -#define TEGRA210_CLK_SOR0_LVDS 311 -#define TEGRA210_CLK_XUSB_SS_DIV2 312 +#define TEGRA210_CLK_XUSB_HOST_SRC 284 +#define TEGRA210_CLK_XUSB_FALCON_SRC 285 +#define TEGRA210_CLK_XUSB_FS_SRC 286 +#define TEGRA210_CLK_XUSB_SS_SRC 287 -#define TEGRA210_CLK_PLL_M_UD 313 -#define TEGRA210_CLK_PLL_C_UD 314 +#define TEGRA210_CLK_XUSB_DEV_SRC 288 +#define TEGRA210_CLK_XUSB_DEV 289 +#define TEGRA210_CLK_XUSB_HS_SRC 290 +#define TEGRA210_CLK_SCLK 291 +#define TEGRA210_CLK_HCLK 292 +#define TEGRA210_CLK_PCLK 293 +#define TEGRA210_CLK_CCLK_G 294 +#define TEGRA210_CLK_CCLK_LP 295 +#define TEGRA210_CLK_DFLL_REF 296 +#define TEGRA210_CLK_DFLL_SOC 297 +#define TEGRA210_CLK_VI_SENSOR2 298 +#define TEGRA210_CLK_PLL_P_OUT5 299 +#define TEGRA210_CLK_CML0 300 +#define TEGRA210_CLK_CML1 301 +#define TEGRA210_CLK_PLL_C4 302 +#define TEGRA210_CLK_PLL_DP 303 +#define TEGRA210_CLK_PLL_E_MUX 304 +#define TEGRA210_CLK_PLL_MB 305 +#define TEGRA210_CLK_PLL_A1 306 +#define TEGRA210_CLK_PLL_D_DSI_OUT 307 +#define TEGRA210_CLK_PLL_C4_OUT0 308 +#define TEGRA210_CLK_PLL_C4_OUT1 309 +#define TEGRA210_CLK_PLL_C4_OUT2 310 +#define TEGRA210_CLK_PLL_C4_OUT3 311 +#define TEGRA210_CLK_PLL_U_OUT 312 +#define TEGRA210_CLK_PLL_U_OUT1 313 +#define TEGRA210_CLK_PLL_U_OUT2 314 +#define TEGRA210_CLK_USB2_HSIC_TRK 315 +#define TEGRA210_CLK_PLL_P_OUT_HSIO 316 +#define TEGRA210_CLK_PLL_P_OUT_XUSB 317 +#define TEGRA210_CLK_XUSB_SSP_SRC 318 +#define TEGRA210_CLK_PLL_RE_OUT1 319 +/* 320 */ +/* 321 */ +/* 322 */ +/* 323 */ +/* 324 */ +/* 325 */ +/* 326 */ +/* 327 */ +/* 328 */ +/* 329 */ +/* 330 */ +/* 331 */ +/* 332 */ +/* 333 */ +/* 334 */ +/* 335 */ +/* 336 */ +/* 337 */ +/* 338 */ +/* 339 */ +/* 340 */ +/* 341 */ +/* 342 */ +/* 343 */ +/* 344 */ +/* 345 */ +/* 346 */ +/* 347 */ +/* 348 */ +/* 349 */ -#define TEGRA210_CLK_PLL_X 227 -#define TEGRA210_CLK_PLL_X_OUT0 228 +#define TEGRA210_CLK_AUDIO0_MUX 350 +#define TEGRA210_CLK_AUDIO1_MUX 351 +#define TEGRA210_CLK_AUDIO2_MUX 352 +#define TEGRA210_CLK_AUDIO3_MUX 353 +#define TEGRA210_CLK_AUDIO4_MUX 354 +#define TEGRA210_CLK_SPDIF_MUX 355 +#define TEGRA210_CLK_CLK_OUT_1_MUX 356 +#define TEGRA210_CLK_CLK_OUT_2_MUX 357 +#define TEGRA210_CLK_CLK_OUT_3_MUX 358 +#define TEGRA210_CLK_DSIA_MUX 359 +#define TEGRA210_CLK_DSIB_MUX 360 +#define TEGRA210_CLK_SOR0_LVDS 361 +#define TEGRA210_CLK_XUSB_SS_DIV2 362 -#define TEGRA210_CLK_CCLK_G 262 -#define TEGRA210_CLK_CCLK_LP 263 +#define TEGRA210_CLK_PLL_M_UD 363 +#define TEGRA210_CLK_PLL_C_UD 364 +#define TEGRA210_CLK_SCLK_MUX 365 -#define TEGRA210_CLK_CLK_MAX 315 +#define TEGRA210_CLK_CLK_MAX 366 -#endif /* _DT_BINDINGS_CLOCK_TEGRA210_CAR_H */ +#endif /* _DT_BINDINGS_CLOCK_TEGRA210_CAR_H */ diff --git a/include/dt-bindings/clock/tegra30-car.h b/include/dt-bindings/clock/tegra30-car.h index 22445820a9..889e49ba0a 100644 --- a/include/dt-bindings/clock/tegra30-car.h +++ b/include/dt-bindings/clock/tegra30-car.h @@ -92,7 +92,7 @@ #define TEGRA30_CLK_OWR 71 #define TEGRA30_CLK_AFI 72 #define TEGRA30_CLK_CSITE 73 -#define TEGRA30_CLK_PCIEX 74 +/* 74 */ #define TEGRA30_CLK_AVPUCQ 75 #define TEGRA30_CLK_LA 76 /* 77 */ diff --git a/include/dt-bindings/comphy/comphy_data.h b/include/dt-bindings/comphy/comphy_data.h new file mode 100644 index 0000000000..a3a6b405eb --- /dev/null +++ b/include/dt-bindings/comphy/comphy_data.h @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2015-2016 Marvell International Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _COMPHY_DATA_H_ +#define _COMPHY_DATA_H_ + +#define PHY_SPEED_1_25G 0 +#define PHY_SPEED_1_5G 1 +#define PHY_SPEED_2_5G 2 +#define PHY_SPEED_3G 3 +#define PHY_SPEED_3_125G 4 +#define PHY_SPEED_5G 5 +#define PHY_SPEED_6G 6 +#define PHY_SPEED_6_25G 7 +#define PHY_SPEED_10_3125G 8 +#define PHY_SPEED_MAX 9 +#define PHY_SPEED_INVALID 0xff + +#define PHY_TYPE_UNCONNECTED 0 +#define PHY_TYPE_PEX0 1 +#define PHY_TYPE_PEX1 2 +#define PHY_TYPE_PEX2 3 +#define PHY_TYPE_PEX3 4 +#define PHY_TYPE_SATA0 5 +#define PHY_TYPE_SATA1 6 +#define PHY_TYPE_SATA2 7 +#define PHY_TYPE_SATA3 8 +#define PHY_TYPE_SGMII0 9 +#define PHY_TYPE_SGMII1 10 +#define PHY_TYPE_SGMII2 11 +#define PHY_TYPE_SGMII3 12 +#define PHY_TYPE_QSGMII 13 +#define PHY_TYPE_USB3_HOST0 14 +#define PHY_TYPE_USB3_HOST1 15 +#define PHY_TYPE_USB3_DEVICE 16 +#define PHY_TYPE_XAUI0 17 +#define PHY_TYPE_XAUI1 18 +#define PHY_TYPE_XAUI2 19 +#define PHY_TYPE_XAUI3 20 +#define PHY_TYPE_RXAUI0 21 +#define PHY_TYPE_RXAUI1 22 +#define PHY_TYPE_KR 23 +#define PHY_TYPE_MAX 24 +#define PHY_TYPE_INVALID 0xff + +#define PHY_POLARITY_NO_INVERT 0 +#define PHY_POLARITY_TXD_INVERT 1 +#define PHY_POLARITY_RXD_INVERT 2 +#define PHY_POLARITY_ALL_INVERT \ + (PHY_POLARITY_TXD_INVERT | PHY_POLARITY_RXD_INVERT) + +#define UTMI_PHY_TO_USB_HOST0 0 +#define UTMI_PHY_TO_USB_HOST1 1 +#define UTMI_PHY_TO_USB_DEVICE0 2 +#define UTMI_PHY_INVALID 0xff + +#endif /* _COMPHY_DATA_H_ */ + diff --git a/include/dt-bindings/memory/tegra114-mc.h b/include/dt-bindings/memory/tegra114-mc.h new file mode 100644 index 0000000000..8f48985a31 --- /dev/null +++ b/include/dt-bindings/memory/tegra114-mc.h @@ -0,0 +1,25 @@ +#ifndef DT_BINDINGS_MEMORY_TEGRA114_MC_H +#define DT_BINDINGS_MEMORY_TEGRA114_MC_H + +#define TEGRA_SWGROUP_PTC 0 +#define TEGRA_SWGROUP_DC 1 +#define TEGRA_SWGROUP_DCB 2 +#define TEGRA_SWGROUP_EPP 3 +#define TEGRA_SWGROUP_G2 4 +#define TEGRA_SWGROUP_AVPC 5 +#define TEGRA_SWGROUP_NV 6 +#define TEGRA_SWGROUP_HDA 7 +#define TEGRA_SWGROUP_HC 8 +#define TEGRA_SWGROUP_MSENC 9 +#define TEGRA_SWGROUP_PPCS 10 +#define TEGRA_SWGROUP_VDE 11 +#define TEGRA_SWGROUP_MPCORELP 12 +#define TEGRA_SWGROUP_MPCORE 13 +#define TEGRA_SWGROUP_VI 14 +#define TEGRA_SWGROUP_ISP 15 +#define TEGRA_SWGROUP_XUSB_HOST 16 +#define TEGRA_SWGROUP_XUSB_DEV 17 +#define TEGRA_SWGROUP_EMUCIF 18 +#define TEGRA_SWGROUP_TSEC 19 + +#endif diff --git a/include/dt-bindings/memory/tegra210-mc.h b/include/dt-bindings/memory/tegra210-mc.h new file mode 100644 index 0000000000..d1731bc14d --- /dev/null +++ b/include/dt-bindings/memory/tegra210-mc.h @@ -0,0 +1,36 @@ +#ifndef DT_BINDINGS_MEMORY_TEGRA210_MC_H +#define DT_BINDINGS_MEMORY_TEGRA210_MC_H + +#define TEGRA_SWGROUP_PTC 0 +#define TEGRA_SWGROUP_DC 1 +#define TEGRA_SWGROUP_DCB 2 +#define TEGRA_SWGROUP_AFI 3 +#define TEGRA_SWGROUP_AVPC 4 +#define TEGRA_SWGROUP_HDA 5 +#define TEGRA_SWGROUP_HC 6 +#define TEGRA_SWGROUP_NVENC 7 +#define TEGRA_SWGROUP_PPCS 8 +#define TEGRA_SWGROUP_SATA 9 +#define TEGRA_SWGROUP_MPCORE 10 +#define TEGRA_SWGROUP_ISP2 11 +#define TEGRA_SWGROUP_XUSB_HOST 12 +#define TEGRA_SWGROUP_XUSB_DEV 13 +#define TEGRA_SWGROUP_ISP2B 14 +#define TEGRA_SWGROUP_TSEC 15 +#define TEGRA_SWGROUP_A9AVP 16 +#define TEGRA_SWGROUP_GPU 17 +#define TEGRA_SWGROUP_SDMMC1A 18 +#define TEGRA_SWGROUP_SDMMC2A 19 +#define TEGRA_SWGROUP_SDMMC3A 20 +#define TEGRA_SWGROUP_SDMMC4A 21 +#define TEGRA_SWGROUP_VIC 22 +#define TEGRA_SWGROUP_VI 23 +#define TEGRA_SWGROUP_NVDEC 24 +#define TEGRA_SWGROUP_APE 25 +#define TEGRA_SWGROUP_NVJPG 26 +#define TEGRA_SWGROUP_SE 27 +#define TEGRA_SWGROUP_AXIAP 28 +#define TEGRA_SWGROUP_ETR 29 +#define TEGRA_SWGROUP_TSECB 30 + +#endif diff --git a/include/dt-bindings/memory/tegra30-mc.h b/include/dt-bindings/memory/tegra30-mc.h new file mode 100644 index 0000000000..502beb03d7 --- /dev/null +++ b/include/dt-bindings/memory/tegra30-mc.h @@ -0,0 +1,24 @@ +#ifndef DT_BINDINGS_MEMORY_TEGRA30_MC_H +#define DT_BINDINGS_MEMORY_TEGRA30_MC_H + +#define TEGRA_SWGROUP_PTC 0 +#define TEGRA_SWGROUP_DC 1 +#define TEGRA_SWGROUP_DCB 2 +#define TEGRA_SWGROUP_EPP 3 +#define TEGRA_SWGROUP_G2 4 +#define TEGRA_SWGROUP_MPE 5 +#define TEGRA_SWGROUP_VI 6 +#define TEGRA_SWGROUP_AFI 7 +#define TEGRA_SWGROUP_AVPC 8 +#define TEGRA_SWGROUP_NV 9 +#define TEGRA_SWGROUP_NV2 10 +#define TEGRA_SWGROUP_HDA 11 +#define TEGRA_SWGROUP_HC 12 +#define TEGRA_SWGROUP_PPCS 13 +#define TEGRA_SWGROUP_SATA 14 +#define TEGRA_SWGROUP_VDE 15 +#define TEGRA_SWGROUP_MPCORELP 16 +#define TEGRA_SWGROUP_MPCORE 17 +#define TEGRA_SWGROUP_ISP 18 + +#endif diff --git a/include/dt-bindings/thermal/tegra124-soctherm.h b/include/dt-bindings/thermal/tegra124-soctherm.h index 85aaf66690..729ab9fc32 100644 --- a/include/dt-bindings/thermal/tegra124-soctherm.h +++ b/include/dt-bindings/thermal/tegra124-soctherm.h @@ -9,5 +9,6 @@ #define TEGRA124_SOCTHERM_SENSOR_MEM 1 #define TEGRA124_SOCTHERM_SENSOR_GPU 2 #define TEGRA124_SOCTHERM_SENSOR_PLLX 3 +#define TEGRA124_SOCTHERM_SENSOR_NUM 4 #endif |