diff options
Diffstat (limited to 'post/board/lwmon/sysmon.c')
| -rw-r--r-- | post/board/lwmon/sysmon.c | 331 |
1 files changed, 331 insertions, 0 deletions
diff --git a/post/board/lwmon/sysmon.c b/post/board/lwmon/sysmon.c new file mode 100644 index 0000000000..f61d598244 --- /dev/null +++ b/post/board/lwmon/sysmon.c @@ -0,0 +1,331 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <post.h> +#include <common.h> + +#ifdef CONFIG_POST + +/* + * SYSMON test + * + * This test performs the system hardware monitoring. + * The test passes when all the following voltages and temperatures + * are within allowed ranges: + * + * Board temperature + * Front temperature + * +3.3V CPU logic + * +5V logic + * +12V PCMCIA + * +12V CCFL + * +5V standby + * + * CCFL is not enabled if temperature values are not within allowed ranges + * + * See the list off all parameters in the sysmon_table below + */ + +#include <post.h> +#include <watchdog.h> +#include <i2c.h> + +#if CONFIG_POST & CFG_POST_SYSMON + +DECLARE_GLOBAL_DATA_PTR; + +static int sysmon_temp_invalid = 0; + +/* #define DEBUG */ + +#define RELOC(x) if (x != NULL) x = (void *) ((ulong) (x) + gd->reloc_off) + +typedef struct sysmon_s sysmon_t; +typedef struct sysmon_table_s sysmon_table_t; + +static void sysmon_lm87_init (sysmon_t * this); +static void sysmon_pic_init (sysmon_t * this); +static uint sysmon_i2c_read (sysmon_t * this, uint addr); +static uint sysmon_i2c_read_sgn (sysmon_t * this, uint addr); +static void sysmon_ccfl_disable (sysmon_table_t * this); +static void sysmon_ccfl_enable (sysmon_table_t * this); + +struct sysmon_s +{ + uchar chip; + void (*init)(sysmon_t *); + uint (*read)(sysmon_t *, uint); +}; + +static sysmon_t sysmon_lm87 = + {CFG_I2C_SYSMON_ADDR, sysmon_lm87_init, sysmon_i2c_read}; +static sysmon_t sysmon_lm87_sgn = + {CFG_I2C_SYSMON_ADDR, sysmon_lm87_init, sysmon_i2c_read_sgn}; +static sysmon_t sysmon_pic = + {CFG_I2C_PICIO_ADDR, sysmon_pic_init, sysmon_i2c_read}; + +static sysmon_t * sysmon_list[] = +{ + &sysmon_lm87, + &sysmon_lm87_sgn, + &sysmon_pic, + NULL +}; + +struct sysmon_table_s +{ + char * name; + char * unit_name; + sysmon_t * sysmon; + void (*exec_before)(sysmon_table_t *); + void (*exec_after)(sysmon_table_t *); + + int unit_precision; + int unit_div; + int unit_min; + int unit_max; + uint val_mask; + uint val_min; + uint val_max; + int val_valid; + uint val_min_alt; + uint val_max_alt; + int val_valid_alt; + uint addr; +}; + +static sysmon_table_t sysmon_table[] = +{ + {"Board temperature", " C", &sysmon_lm87_sgn, NULL, sysmon_ccfl_disable, + 1, 1, -128, 127, 0xFF, 0x58, 0xD5, 0, 0x6C, 0xC6, 0, 0x27}, + + {"Front temperature", " C", &sysmon_lm87, NULL, sysmon_ccfl_disable, + 1, 100, -27316, 8984, 0xFF, 0xA4, 0xFC, 0, 0xB2, 0xF1, 0, 0x29}, + + {"+3.3V CPU logic", "V", &sysmon_lm87, NULL, NULL, + 100, 1000, 0, 4386, 0xFF, 0xB6, 0xC9, 0, 0xB6, 0xC9, 0, 0x22}, + + {"+ 5 V logic", "V", &sysmon_lm87, NULL, NULL, + 100, 1000, 0, 6630, 0xFF, 0xB6, 0xCA, 0, 0xB6, 0xCA, 0, 0x23}, + + {"+12 V PCMCIA", "V", &sysmon_lm87, NULL, NULL, + 100, 1000, 0, 15460, 0xFF, 0xBC, 0xD0, 0, 0xBC, 0xD0, 0, 0x21}, + + {"+12 V CCFL", "V", &sysmon_lm87, NULL, sysmon_ccfl_enable, + 100, 1000, 0, 15900, 0xFF, 0xB6, 0xCA, 0, 0xB6, 0xCA, 0, 0x24}, + + {"+ 5 V standby", "V", &sysmon_pic, NULL, NULL, + 100, 1000, 0, 6040, 0xFF, 0xC8, 0xDE, 0, 0xC8, 0xDE, 0, 0x7C}, +}; +static int sysmon_table_size = sizeof(sysmon_table) / sizeof(sysmon_table[0]); + +static int conversion_done = 0; + + +int sysmon_init_f (void) +{ + sysmon_t ** l; + ulong reg; + + /* Power on CCFL, PCMCIA */ + reg = pic_read (0x60); + reg |= 0x09; + pic_write (0x60, reg); + + for (l = sysmon_list; *l; l++) { + (*l)->init(*l); + } + + return 0; +} + +void sysmon_reloc (void) +{ + sysmon_t ** l; + sysmon_table_t * t; + + for (l = sysmon_list; *l; l++) { + RELOC(*l); + RELOC((*l)->init); + RELOC((*l)->read); + } + + for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) { + RELOC(t->exec_before); + RELOC(t->exec_after); + RELOC(t->sysmon); + } +} + +static char *sysmon_unit_value (sysmon_table_t *s, uint val) +{ + static char buf[32]; + int unit_val = + s->unit_min + (s->unit_max - s->unit_min) * val / s->val_mask; + char *p, sign; + int dec, frac; + + if (val == -1) { + return "I/O ERROR"; + } + + if (unit_val < 0) { + sign = '-'; + unit_val = -unit_val; + } else { + sign = '+'; + } + + p = buf + sprintf(buf, "%c%2d", sign, unit_val / s->unit_div); + + + frac = unit_val % s->unit_div; + + frac /= (s->unit_div / s->unit_precision); + + dec = s->unit_precision; + + if (dec != 1) { + *p++ = '.'; + } + for (dec /= 10; dec != 0; dec /= 10) { + *p++ = '0' + (frac / dec) % 10; + } + strcpy(p, s->unit_name); + + return buf; +} + +static void sysmon_lm87_init (sysmon_t * this) +{ + uchar val; + + /* Detect LM87 chip */ + if (i2c_read(this->chip, 0x40, 1, &val, 1) || (val & 0x80) != 0 || + i2c_read(this->chip, 0x3E, 1, &val, 1) || val != 0x02) { + printf("Error: LM87 not found at 0x%02X\n", this->chip); + return; + } + + /* Configure pins 5,6 as AIN */ + val = 0x03; + if (i2c_write(this->chip, 0x16, 1, &val, 1)) { + printf("Error: can't write LM87 config register\n"); + return; + } + + /* Start monitoring */ + val = 0x01; + if (i2c_write(this->chip, 0x40, 1, &val, 1)) { + printf("Error: can't write LM87 config register\n"); + return; + } +} + +static void sysmon_pic_init (sysmon_t * this) +{ +} + +static uint sysmon_i2c_read (sysmon_t * this, uint addr) +{ + uchar val; + uint res = i2c_read(this->chip, addr, 1, &val, 1); + + return res == 0 ? val : -1; +} + +static uint sysmon_i2c_read_sgn (sysmon_t * this, uint addr) +{ + uchar val; + return i2c_read(this->chip, addr, 1, &val, 1) == 0 ? + 128 + (signed char)val : -1; +} + +static void sysmon_ccfl_disable (sysmon_table_t * this) +{ + if (!this->val_valid_alt) { + sysmon_temp_invalid = 1; + } +} + +static void sysmon_ccfl_enable (sysmon_table_t * this) +{ + ulong reg; + + if (!sysmon_temp_invalid) { + reg = pic_read (0x60); + reg |= 0x06; + pic_write (0x60, reg); + } +} + +int sysmon_post_test (int flags) +{ + int res = 0; + sysmon_table_t * t; + uint val; + + /* + * The A/D conversion on the LM87 sensor takes 300 ms. + */ + if (! conversion_done) { + while (post_time_ms(gd->post_init_f_time) < 300) WATCHDOG_RESET (); + conversion_done = 1; + } + + for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) { + if (t->exec_before) { + t->exec_before(t); + } + + val = t->sysmon->read(t->sysmon, t->addr); + if (val != -1) { + t->val_valid = val >= t->val_min && val <= t->val_max; + t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt; + } else { + t->val_valid = 0; + t->val_valid_alt = 0; + } + + if (t->exec_after) { + t->exec_after(t); + } + + if ((!t->val_valid) || (flags & POST_MANUAL)) { + printf("%-17s = %-10s ", t->name, sysmon_unit_value(t, val)); + printf("allowed range"); + printf(" %-8s ..", sysmon_unit_value(t, t->val_min)); + printf(" %-8s", sysmon_unit_value(t, t->val_max)); + printf(" %s\n", t->val_valid ? "OK" : "FAIL"); + } + + if (!t->val_valid) { + res = -1; + } + } + + return res; +} + +#endif /* CONFIG_POST & CFG_POST_SYSMON */ +#endif /* CONFIG_POST */ |