diff options
Diffstat (limited to 'rtc/ds1374.c')
| -rw-r--r-- | rtc/ds1374.c | 253 |
1 files changed, 253 insertions, 0 deletions
diff --git a/rtc/ds1374.c b/rtc/ds1374.c new file mode 100644 index 0000000000..50a996c5cb --- /dev/null +++ b/rtc/ds1374.c @@ -0,0 +1,253 @@ +/* + * (C) Copyright 2001, 2002, 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * Keith Outwater, keith_outwater@mvis.com` + * Steven Scholz, steven.scholz@imc-berlin.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim) + * DS1374 Real Time Clock (RTC). + * + * based on ds1337.c + */ + +#include <common.h> +#include <command.h> +#include <rtc.h> +#include <i2c.h> + +#if (defined(CONFIG_RTC_DS1374)) && (CONFIG_COMMANDS & CFG_CMD_DATE) + +/*---------------------------------------------------------------------*/ +#undef DEBUG_RTC +#define DEBUG_RTC + +#ifdef DEBUG_RTC +#define DEBUGR(fmt,args...) printf(fmt ,##args) +#else +#define DEBUGR(fmt,args...) +#endif +/*---------------------------------------------------------------------*/ + +#ifndef CFG_I2C_RTC_ADDR +# define CFG_I2C_RTC_ADDR 0x68 +#endif + +#if defined(CONFIG_RTC_DS1374) && (CFG_I2C_SPEED > 400000) +# error The DS1374 is specified up to 400kHz in fast mode! +#endif + +/* + * RTC register addresses + */ +#define RTC_TOD_CNT_BYTE0_ADDR 0x00 /* TimeOfDay */ +#define RTC_TOD_CNT_BYTE1_ADDR 0x01 +#define RTC_TOD_CNT_BYTE2_ADDR 0x02 +#define RTC_TOD_CNT_BYTE3_ADDR 0x03 + +#define RTC_WD_ALM_CNT_BYTE0_ADDR 0x04 +#define RTC_WD_ALM_CNT_BYTE1_ADDR 0x05 +#define RTC_WD_ALM_CNT_BYTE2_ADDR 0x06 + +#define RTC_CTL_ADDR 0x07 /* RTC-CoNTrol-register */ +#define RTC_SR_ADDR 0x08 /* RTC-StatusRegister */ +#define RTC_TCS_DS_ADDR 0x09 /* RTC-TrickleChargeSelect DiodeSelect-register */ + +#define RTC_CTL_BIT_AIE (1<<0) /* Bit 0 - Alarm Interrupt enable */ +#define RTC_CTL_BIT_RS1 (1<<1) /* Bit 1/2 - Rate Select square wave output */ +#define RTC_CTL_BIT_RS2 (1<<2) /* Bit 2/2 - Rate Select square wave output */ +#define RTC_CTL_BIT_WDSTR (1<<3) /* Bit 3 - Watchdog Reset Steering */ +#define RTC_CTL_BIT_BBSQW (1<<4) /* Bit 4 - Battery-Backed Square-Wave */ +#define RTC_CTL_BIT_WD_ALM (1<<5) /* Bit 5 - Watchdoc/Alarm Counter Select */ +#define RTC_CTL_BIT_WACE (1<<6) /* Bit 6 - Watchdog/Alarm Counter Enable WACE*/ +#define RTC_CTL_BIT_EN_OSC (1<<7) /* Bit 7 - Enable Oscilator */ + +#define RTC_SR_BIT_AF 0x01 /* Bit 0 = Alarm Flag */ +#define RTC_SR_BIT_OSF 0x80 /* Bit 7 - Osc Stop Flag */ + +typedef unsigned char boolean_t; + +#ifndef TRUE +#define TRUE ((boolean_t)(0==0)) +#endif +#ifndef FALSE +#define FALSE (!TRUE) +#endif + +const char RtcTodAddr[] = { + RTC_TOD_CNT_BYTE0_ADDR, + RTC_TOD_CNT_BYTE1_ADDR, + RTC_TOD_CNT_BYTE2_ADDR, + RTC_TOD_CNT_BYTE3_ADDR +}; + +static uchar rtc_read (uchar reg); +static void rtc_write (uchar reg, uchar val, boolean_t set); +static void rtc_write_raw (uchar reg, uchar val); + +/* + * Get the current time from the RTC + */ +void rtc_get (struct rtc_time *tm){ + + unsigned long time1, time2; + unsigned int limit; + unsigned char tmp; + unsigned int i; + + /* + * Since the reads are being performed one byte at a time, + * there is a chance that a carry will occur during the read. + * To detect this, 2 reads are performed and compared. + */ + limit = 10; + do { + i = 4; + time1 = 0; + while (i--) { + tmp = rtc_read(RtcTodAddr[i]); + time1 = (time1 << 8) | (tmp & 0xff); + } + + i = 4; + time2 = 0; + while (i--) { + tmp = rtc_read(RtcTodAddr[i]); + time2 = (time2 << 8) | (tmp & 0xff); + } + } while ((time1 != time2) && limit--); + + if (time1 != time2) { + printf("can't get consistent time from rtc chip\n"); + } + + DEBUGR ("Get RTC s since 1.1.1970: %d\n", time1); + + to_tm(time1, tm); /* To Gregorian Date */ + + if (rtc_read(RTC_SR_ADDR) & RTC_SR_BIT_OSF) + printf ("### Warning: RTC oscillator has stopped\n"); + + DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, + tm->tm_hour, tm->tm_min, tm->tm_sec); +} + +/* + * Set the RTC + */ +void rtc_set (struct rtc_time *tmp){ + + unsigned long time; + unsigned i; + + DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); + + if (tmp->tm_year < 1970 || tmp->tm_year > 2069) + printf("WARNING: year should be between 1970 and 2069!\n"); + + time = mktime(tmp->tm_year, tmp->tm_mon, + tmp->tm_mday, tmp->tm_hour, + tmp->tm_min, tmp->tm_sec); + + DEBUGR ("Set RTC s since 1.1.1970: %d (0x%02x)\n", time, time); + + /* write to RTC_TOD_CNT_BYTEn_ADDR */ + for (i = 0; i <= 3; i++) { + rtc_write_raw(RtcTodAddr[i], (unsigned char)(time & 0xff)); + time = time >> 8; + } + + /* Start clock */ + rtc_write(RTC_CTL_ADDR, RTC_CTL_BIT_EN_OSC, FALSE); +} + +/* + * Reset the RTC. We setting the date back to 1970-01-01. + * We also enable the oscillator output on the SQW/OUT pin and program + * it for 32,768 Hz output. Note that according to the datasheet, turning + * on the square wave output increases the current drain on the backup + * battery to something between 480nA and 800nA. + */ +void rtc_reset (void){ + + struct rtc_time tmp; + + /* clear status flags */ + rtc_write (RTC_SR_ADDR, (RTC_SR_BIT_AF|RTC_SR_BIT_OSF), FALSE); /* clearing OSF and AF */ + + /* Initialise DS1374 oriented to MPC8349E-ADS */ + rtc_write (RTC_CTL_ADDR, (RTC_CTL_BIT_EN_OSC + |RTC_CTL_BIT_WACE + |RTC_CTL_BIT_AIE), FALSE);/* start osc, disable WACE, clear AIE + - set to 0 */ + rtc_write (RTC_CTL_ADDR, (RTC_CTL_BIT_WD_ALM + |RTC_CTL_BIT_WDSTR + |RTC_CTL_BIT_RS1 + |RTC_CTL_BIT_RS2 + |RTC_CTL_BIT_BBSQW), TRUE);/* disable WD/ALM, WDSTR set to INT-pin, + set BBSQW and SQW to 32k + - set to 1 */ + tmp.tm_year = 1970; + tmp.tm_mon = 1; + tmp.tm_mday= 1; + tmp.tm_hour = 0; + tmp.tm_min = 0; + tmp.tm_sec = 0; + + rtc_set(&tmp); + + printf("RTC: %4d-%02d-%02d %2d:%02d:%02d UTC\n", + tmp.tm_year, tmp.tm_mon, tmp.tm_mday, + tmp.tm_hour, tmp.tm_min, tmp.tm_sec); + + rtc_write(RTC_WD_ALM_CNT_BYTE2_ADDR,0xAC, TRUE); + rtc_write(RTC_WD_ALM_CNT_BYTE1_ADDR,0xDE, TRUE); + rtc_write(RTC_WD_ALM_CNT_BYTE2_ADDR,0xAD, TRUE); +} + +/* + * Helper functions + */ +static uchar rtc_read (uchar reg) +{ + return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg)); +} + +static void rtc_write (uchar reg, uchar val, boolean_t set) +{ + if (set == TRUE) { + val |= i2c_reg_read (CFG_I2C_RTC_ADDR, reg); + i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val); + } else { + val = i2c_reg_read (CFG_I2C_RTC_ADDR, reg) & ~val; + i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val); + } +} + +static void rtc_write_raw (uchar reg, uchar val) +{ + i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val); +} +#endif /* (CONFIG_RTC_DS1374) && (CFG_COMMANDS & CFG_CMD_DATE) */ |