diff options
Diffstat (limited to 'scripts/dtc/libfdt/libfdt.h')
| -rw-r--r-- | scripts/dtc/libfdt/libfdt.h | 1833 |
1 files changed, 1833 insertions, 0 deletions
diff --git a/scripts/dtc/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h new file mode 100644 index 0000000000..9e71bb9e03 --- /dev/null +++ b/scripts/dtc/libfdt/libfdt.h @@ -0,0 +1,1833 @@ +#ifndef _LIBFDT_H +#define _LIBFDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "libfdt_env.h" +#include "fdt.h" + +#define FDT_FIRST_SUPPORTED_VERSION 0x10 +#define FDT_LAST_SUPPORTED_VERSION 0x11 + +/* Error codes: informative error codes */ +#define FDT_ERR_NOTFOUND 1 + /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ +#define FDT_ERR_EXISTS 2 + /* FDT_ERR_EXISTS: Attempted to create a node or property which + * already exists */ +#define FDT_ERR_NOSPACE 3 + /* FDT_ERR_NOSPACE: Operation needed to expand the device + * tree, but its buffer did not have sufficient space to + * contain the expanded tree. Use fdt_open_into() to move the + * device tree to a buffer with more space. */ + +/* Error codes: codes for bad parameters */ +#define FDT_ERR_BADOFFSET 4 + /* FDT_ERR_BADOFFSET: Function was passed a structure block + * offset which is out-of-bounds, or which points to an + * unsuitable part of the structure for the operation. */ +#define FDT_ERR_BADPATH 5 + /* FDT_ERR_BADPATH: Function was passed a badly formatted path + * (e.g. missing a leading / for a function which requires an + * absolute path) */ +#define FDT_ERR_BADPHANDLE 6 + /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle. + * This can be caused either by an invalid phandle property + * length, or the phandle value was either 0 or -1, which are + * not permitted. */ +#define FDT_ERR_BADSTATE 7 + /* FDT_ERR_BADSTATE: Function was passed an incomplete device + * tree created by the sequential-write functions, which is + * not sufficiently complete for the requested operation. */ + +/* Error codes: codes for bad device tree blobs */ +#define FDT_ERR_TRUNCATED 8 + /* FDT_ERR_TRUNCATED: Structure block of the given device tree + * ends without an FDT_END tag. */ +#define FDT_ERR_BADMAGIC 9 + /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a + * device tree at all - it is missing the flattened device + * tree magic number. */ +#define FDT_ERR_BADVERSION 10 + /* FDT_ERR_BADVERSION: Given device tree has a version which + * can't be handled by the requested operation. For + * read-write functions, this may mean that fdt_open_into() is + * required to convert the tree to the expected version. */ +#define FDT_ERR_BADSTRUCTURE 11 + /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt + * structure block or other serious error (e.g. misnested + * nodes, or subnodes preceding properties). */ +#define FDT_ERR_BADLAYOUT 12 + /* FDT_ERR_BADLAYOUT: For read-write functions, the given + * device tree has it's sub-blocks in an order that the + * function can't handle (memory reserve map, then structure, + * then strings). Use fdt_open_into() to reorganize the tree + * into a form suitable for the read-write operations. */ + +/* "Can't happen" error indicating a bug in libfdt */ +#define FDT_ERR_INTERNAL 13 + /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. + * Should never be returned, if it is, it indicates a bug in + * libfdt itself. */ + +/* Errors in device tree content */ +#define FDT_ERR_BADNCELLS 14 + /* FDT_ERR_BADNCELLS: Device tree has a #address-cells, #size-cells + * or similar property with a bad format or value */ + +#define FDT_ERR_BADVALUE 15 + /* FDT_ERR_BADVALUE: Device tree has a property with an unexpected + * value. For example: a property expected to contain a string list + * is not NUL-terminated within the length of its value. */ + +#define FDT_ERR_BADOVERLAY 16 + /* FDT_ERR_BADOVERLAY: The device tree overlay, while + * correctly structured, cannot be applied due to some + * unexpected or missing value, property or node. */ + +#define FDT_ERR_NOPHANDLES 17 + /* FDT_ERR_NOPHANDLES: The device tree doesn't have any + * phandle available anymore without causing an overflow */ + +#define FDT_ERR_MAX 17 + +/**********************************************************************/ +/* Low-level functions (you probably don't need these) */ +/**********************************************************************/ + +const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen); +static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) +{ + return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen); +} + +uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); + +/**********************************************************************/ +/* Traversal functions */ +/**********************************************************************/ + +int fdt_next_node(const void *fdt, int offset, int *depth); + +/** + * fdt_first_subnode() - get offset of first direct subnode + * + * @fdt: FDT blob + * @offset: Offset of node to check + * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none + */ +int fdt_first_subnode(const void *fdt, int offset); + +/** + * fdt_next_subnode() - get offset of next direct subnode + * + * After first calling fdt_first_subnode(), call this function repeatedly to + * get direct subnodes of a parent node. + * + * @fdt: FDT blob + * @offset: Offset of previous subnode + * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more + * subnodes + */ +int fdt_next_subnode(const void *fdt, int offset); + +/** + * fdt_for_each_subnode - iterate over all subnodes of a parent + * + * @node: child node (int, lvalue) + * @fdt: FDT blob (const void *) + * @parent: parent node (int) + * + * This is actually a wrapper around a for loop and would be used like so: + * + * fdt_for_each_subnode(node, fdt, parent) { + * Use node + * ... + * } + * + * if ((node < 0) && (node != -FDT_ERR_NOT_FOUND)) { + * Error handling + * } + * + * Note that this is implemented as a macro and @node is used as + * iterator in the loop. The parent variable be constant or even a + * literal. + * + */ +#define fdt_for_each_subnode(node, fdt, parent) \ + for (node = fdt_first_subnode(fdt, parent); \ + node >= 0; \ + node = fdt_next_subnode(fdt, node)) + +/**********************************************************************/ +/* General functions */ +/**********************************************************************/ + +#define fdt_get_header(fdt, field) \ + (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field)) +#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) +#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) +#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) +#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) +#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) +#define fdt_version(fdt) (fdt_get_header(fdt, version)) +#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) +#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) +#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) +#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) + +#define __fdt_set_hdr(name) \ + static inline void fdt_set_##name(void *fdt, uint32_t val) \ + { \ + struct fdt_header *fdth = (struct fdt_header *)fdt; \ + fdth->name = cpu_to_fdt32(val); \ + } +__fdt_set_hdr(magic); +__fdt_set_hdr(totalsize); +__fdt_set_hdr(off_dt_struct); +__fdt_set_hdr(off_dt_strings); +__fdt_set_hdr(off_mem_rsvmap); +__fdt_set_hdr(version); +__fdt_set_hdr(last_comp_version); +__fdt_set_hdr(boot_cpuid_phys); +__fdt_set_hdr(size_dt_strings); +__fdt_set_hdr(size_dt_struct); +#undef __fdt_set_hdr + +/** + * fdt_check_header - sanity check a device tree or possible device tree + * @fdt: pointer to data which might be a flattened device tree + * + * fdt_check_header() checks that the given buffer contains what + * appears to be a flattened device tree with sane information in its + * header. + * + * returns: + * 0, if the buffer appears to contain a valid device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings, as above + */ +int fdt_check_header(const void *fdt); + +/** + * fdt_move - move a device tree around in memory + * @fdt: pointer to the device tree to move + * @buf: pointer to memory where the device is to be moved + * @bufsize: size of the memory space at buf + * + * fdt_move() relocates, if possible, the device tree blob located at + * fdt to the buffer at buf of size bufsize. The buffer may overlap + * with the existing device tree blob at fdt. Therefore, + * fdt_move(fdt, fdt, fdt_totalsize(fdt)) + * should always succeed. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_move(const void *fdt, void *buf, int bufsize); + +/**********************************************************************/ +/* Read-only functions */ +/**********************************************************************/ + +/** + * fdt_string - retrieve a string from the strings block of a device tree + * @fdt: pointer to the device tree blob + * @stroffset: offset of the string within the strings block (native endian) + * + * fdt_string() retrieves a pointer to a single string from the + * strings block of the device tree blob at fdt. + * + * returns: + * a pointer to the string, on success + * NULL, if stroffset is out of bounds + */ +const char *fdt_string(const void *fdt, int stroffset); + +/** + * fdt_get_max_phandle - retrieves the highest phandle in a tree + * @fdt: pointer to the device tree blob + * + * fdt_get_max_phandle retrieves the highest phandle in the given + * device tree. This will ignore badly formatted phandles, or phandles + * with a value of 0 or -1. + * + * returns: + * the highest phandle on success + * 0, if no phandle was found in the device tree + * -1, if an error occurred + */ +uint32_t fdt_get_max_phandle(const void *fdt); + +/** + * fdt_num_mem_rsv - retrieve the number of memory reserve map entries + * @fdt: pointer to the device tree blob + * + * Returns the number of entries in the device tree blob's memory + * reservation map. This does not include the terminating 0,0 entry + * or any other (0,0) entries reserved for expansion. + * + * returns: + * the number of entries + */ +int fdt_num_mem_rsv(const void *fdt); + +/** + * fdt_get_mem_rsv - retrieve one memory reserve map entry + * @fdt: pointer to the device tree blob + * @address, @size: pointers to 64-bit variables + * + * On success, *address and *size will contain the address and size of + * the n-th reserve map entry from the device tree blob, in + * native-endian format. + * + * returns: + * 0, on success + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); + +/** + * fdt_subnode_offset_namelen - find a subnode based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_subnode_offset(), but only examine the first + * namelen characters of name for matching the subnode name. This is + * useful for finding subnodes based on a portion of a larger string, + * such as a full path. + */ +int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, + const char *name, int namelen); +/** + * fdt_subnode_offset - find a subnode of a given node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_subnode_offset() finds a subnode of the node at structure block + * offset parentoffset with the given name. name may include a unit + * address, in which case fdt_subnode_offset() will find the subnode + * with that unit address, or the unit address may be omitted, in + * which case fdt_subnode_offset() will find an arbitrary subnode + * whose name excluding unit address matches the given name. + * + * returns: + * structure block offset of the requested subnode (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE + * tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); + +/** + * fdt_path_offset_namelen - find a tree node by its full path + * @fdt: pointer to the device tree blob + * @path: full path of the node to locate + * @namelen: number of characters of path to consider + * + * Identical to fdt_path_offset(), but only consider the first namelen + * characters of path as the path name. + */ +int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen); + +/** + * fdt_path_offset - find a tree node by its full path + * @fdt: pointer to the device tree blob + * @path: full path of the node to locate + * + * fdt_path_offset() finds a node of a given path in the device tree. + * Each path component may omit the unit address portion, but the + * results of this are undefined if any such path component is + * ambiguous (that is if there are multiple nodes at the relevant + * level matching the given component, differentiated only by unit + * address). + * + * returns: + * structure block offset of the node with the requested path (>=0), on + * success + * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid + * -FDT_ERR_NOTFOUND, if the requested node does not exist + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_path_offset(const void *fdt, const char *path); + +/** + * fdt_get_name - retrieve the name of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the starting node + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_name() retrieves the name (including unit address) of the + * device tree node at structure block offset nodeoffset. If lenp is + * non-NULL, the length of this name is also returned, in the integer + * pointed to by lenp. + * + * returns: + * pointer to the node's name, on success + * If lenp is non-NULL, *lenp contains the length of that name + * (>=0) + * NULL, on error + * if lenp is non-NULL *lenp contains an error code (<0): + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE + * tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); + +/** + * fdt_first_property_offset - find the offset of a node's first property + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of a node + * + * fdt_first_property_offset() finds the first property of the node at + * the given structure block offset. + * + * returns: + * structure block offset of the property (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested node has no properties + * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_first_property_offset(const void *fdt, int nodeoffset); + +/** + * fdt_next_property_offset - step through a node's properties + * @fdt: pointer to the device tree blob + * @offset: structure block offset of a property + * + * fdt_next_property_offset() finds the property immediately after the + * one at the given structure block offset. This will be a property + * of the same node as the given property. + * + * returns: + * structure block offset of the next property (>=0), on success + * -FDT_ERR_NOTFOUND, if the given property is the last in its node + * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_PROP tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_next_property_offset(const void *fdt, int offset); + +/** + * fdt_for_each_property_offset - iterate over all properties of a node + * + * @property_offset: property offset (int, lvalue) + * @fdt: FDT blob (const void *) + * @node: node offset (int) + * + * This is actually a wrapper around a for loop and would be used like so: + * + * fdt_for_each_property_offset(property, fdt, node) { + * Use property + * ... + * } + * + * if ((property < 0) && (property != -FDT_ERR_NOT_FOUND)) { + * Error handling + * } + * + * Note that this is implemented as a macro and property is used as + * iterator in the loop. The node variable can be constant or even a + * literal. + */ +#define fdt_for_each_property_offset(property, fdt, node) \ + for (property = fdt_first_property_offset(fdt, node); \ + property >= 0; \ + property = fdt_next_property_offset(fdt, property)) + +/** + * fdt_get_property_by_offset - retrieve the property at a given offset + * @fdt: pointer to the device tree blob + * @offset: offset of the property to retrieve + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_property_by_offset() retrieves a pointer to the + * fdt_property structure within the device tree blob at the given + * offset. If lenp is non-NULL, the length of the property value is + * also returned, in the integer pointed to by lenp. + * + * returns: + * pointer to the structure representing the property + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const struct fdt_property *fdt_get_property_by_offset(const void *fdt, + int offset, + int *lenp); + +/** + * fdt_get_property_namelen - find a property based on substring + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @namelen: number of characters of name to consider + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * Identical to fdt_get_property(), but only examine the first namelen + * characters of name for matching the property name. + */ +const struct fdt_property *fdt_get_property_namelen(const void *fdt, + int nodeoffset, + const char *name, + int namelen, int *lenp); + +/** + * fdt_get_property - find a given property in a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_property() retrieves a pointer to the fdt_property + * structure within the device tree blob corresponding to the property + * named 'name' of the node at offset nodeoffset. If lenp is + * non-NULL, the length of the property value is also returned, in the + * integer pointed to by lenp. + * + * returns: + * pointer to the structure representing the property + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE + * tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, + const char *name, + int *lenp) +{ + return (struct fdt_property *)(uintptr_t) + fdt_get_property(fdt, nodeoffset, name, lenp); +} + +/** + * fdt_getprop_by_offset - retrieve the value of a property at a given offset + * @fdt: pointer to the device tree blob + * @ffset: offset of the property to read + * @namep: pointer to a string variable (will be overwritten) or NULL + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_getprop_by_offset() retrieves a pointer to the value of the + * property at structure block offset 'offset' (this will be a pointer + * to within the device blob itself, not a copy of the value). If + * lenp is non-NULL, the length of the property value is also + * returned, in the integer pointed to by lenp. If namep is non-NULL, + * the property's namne will also be returned in the char * pointed to + * by namep (this will be a pointer to within the device tree's string + * block, not a new copy of the name). + * + * returns: + * pointer to the property's value + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * if namep is non-NULL *namep contiains a pointer to the property + * name. + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const void *fdt_getprop_by_offset(const void *fdt, int offset, + const char **namep, int *lenp); + +/** + * fdt_getprop_namelen - get property value based on substring + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @namelen: number of characters of name to consider + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * Identical to fdt_getprop(), but only examine the first namelen + * characters of name for matching the property name. + */ +const void *fdt_getprop_namelen(const void *fdt, int nodeoffset, + const char *name, int namelen, int *lenp); +static inline void *fdt_getprop_namelen_w(void *fdt, int nodeoffset, + const char *name, int namelen, + int *lenp) +{ + return (void *)(uintptr_t)fdt_getprop_namelen(fdt, nodeoffset, name, + namelen, lenp); +} + +/** + * fdt_getprop - retrieve the value of a given property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_getprop() retrieves a pointer to the value of the property + * named 'name' of the node at offset nodeoffset (this will be a + * pointer to within the device blob itself, not a copy of the value). + * If lenp is non-NULL, the length of the property value is also + * returned, in the integer pointed to by lenp. + * + * returns: + * pointer to the property's value + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE + * tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline void *fdt_getprop_w(void *fdt, int nodeoffset, + const char *name, int *lenp) +{ + return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp); +} + +/** + * fdt_get_phandle - retrieve the phandle of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the node + * + * fdt_get_phandle() retrieves the phandle of the device tree node at + * structure block offset nodeoffset. + * + * returns: + * the phandle of the node at nodeoffset, on success (!= 0, != -1) + * 0, if the node has no phandle, or another error occurs + */ +uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); + +/** + * fdt_get_alias_namelen - get alias based on substring + * @fdt: pointer to the device tree blob + * @name: name of the alias th look up + * @namelen: number of characters of name to consider + * + * Identical to fdt_get_alias(), but only examine the first namelen + * characters of name for matching the alias name. + */ +const char *fdt_get_alias_namelen(const void *fdt, + const char *name, int namelen); + +/** + * fdt_get_alias - retrieve the path referenced by a given alias + * @fdt: pointer to the device tree blob + * @name: name of the alias th look up + * + * fdt_get_alias() retrieves the value of a given alias. That is, the + * value of the property named 'name' in the node /aliases. + * + * returns: + * a pointer to the expansion of the alias named 'name', if it exists + * NULL, if the given alias or the /aliases node does not exist + */ +const char *fdt_get_alias(const void *fdt, const char *name); + +/** + * fdt_get_path - determine the full path of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose path to find + * @buf: character buffer to contain the returned path (will be overwritten) + * @buflen: size of the character buffer at buf + * + * fdt_get_path() computes the full path of the node at offset + * nodeoffset, and records that path in the buffer at buf. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * 0, on success + * buf contains the absolute path of the node at + * nodeoffset, as a NUL-terminated string. + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) + * characters and will not fit in the given buffer. + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); + +/** + * fdt_supernode_atdepth_offset - find a specific ancestor of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * @supernodedepth: depth of the ancestor to find + * @nodedepth: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_supernode_atdepth_offset() finds an ancestor of the given node + * at a specific depth from the root (where the root itself has depth + * 0, its immediate subnodes depth 1 and so forth). So + * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); + * will always return 0, the offset of the root node. If the node at + * nodeoffset has depth D, then: + * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); + * will return nodeoffset itself. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * structure block offset of the node at node offset's ancestor + * of depth supernodedepth (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of + * nodeoffset + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, + int supernodedepth, int *nodedepth); + +/** + * fdt_node_depth - find the depth of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_node_depth() finds the depth of a given node. The root node + * has depth 0, its immediate subnodes depth 1 and so forth. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * depth of the node at nodeoffset (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_depth(const void *fdt, int nodeoffset); + +/** + * fdt_parent_offset - find the parent of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_parent_offset() locates the parent node of a given node (that + * is, it finds the offset of the node which contains the node at + * nodeoffset as a subnode). + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset, *twice*. + * + * returns: + * structure block offset of the parent of the node at nodeoffset + * (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_parent_offset(const void *fdt, int nodeoffset); + +/** + * fdt_node_offset_by_prop_value - find nodes with a given property value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @propname: property name to check + * @propval: property value to search for + * @proplen: length of the value in propval + * + * fdt_node_offset_by_prop_value() returns the offset of the first + * node after startoffset, which has a property named propname whose + * value is of length proplen and has value equal to propval; or if + * startoffset is -1, the very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, + * propval, proplen); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, + * propval, proplen); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, + const char *propname, + const void *propval, int proplen); + +/** + * fdt_node_offset_by_phandle - find the node with a given phandle + * @fdt: pointer to the device tree blob + * @phandle: phandle value + * + * fdt_node_offset_by_phandle() returns the offset of the node + * which has the given phandle value. If there is more than one node + * in the tree with the given phandle (an invalid tree), results are + * undefined. + * + * returns: + * structure block offset of the located node (>= 0), on success + * -FDT_ERR_NOTFOUND, no node with that phandle exists + * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); + +/** + * fdt_node_check_compatible: check a node's compatible property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @compatible: string to match against + * + * + * fdt_node_check_compatible() returns 0 if the given node contains a + * 'compatible' property with the given string as one of its elements, + * it returns non-zero otherwise, or on error. + * + * returns: + * 0, if the node has a 'compatible' property listing the given string + * 1, if the node has a 'compatible' property, but it does not list + * the given string + * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property + * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_check_compatible(const void *fdt, int nodeoffset, + const char *compatible); + +/** + * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @compatible: 'compatible' string to match against + * + * fdt_node_offset_by_compatible() returns the offset of the first + * node after startoffset, which has a 'compatible' property which + * lists the given compatible string; or if startoffset is -1, the + * very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_compatible(const void *fdt, int startoffset, + const char *compatible); + +/** + * fdt_stringlist_contains - check a string list property for a string + * @strlist: Property containing a list of strings to check + * @listlen: Length of property + * @str: String to search for + * + * This is a utility function provided for convenience. The list contains + * one or more strings, each terminated by \0, as is found in a device tree + * "compatible" property. + * + * @return: 1 if the string is found in the list, 0 not found, or invalid list + */ +int fdt_stringlist_contains(const char *strlist, int listlen, const char *str); + +/** + * fdt_stringlist_count - count the number of strings in a string list + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @property: name of the property containing the string list + * @return: + * the number of strings in the given property + * -FDT_ERR_BADVALUE if the property value is not NUL-terminated + * -FDT_ERR_NOTFOUND if the property does not exist + */ +int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property); + +/** + * fdt_stringlist_search - find a string in a string list and return its index + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @property: name of the property containing the string list + * @string: string to look up in the string list + * + * Note that it is possible for this function to succeed on property values + * that are not NUL-terminated. That's because the function will stop after + * finding the first occurrence of @string. This can for example happen with + * small-valued cell properties, such as #address-cells, when searching for + * the empty string. + * + * @return: + * the index of the string in the list of strings + * -FDT_ERR_BADVALUE if the property value is not NUL-terminated + * -FDT_ERR_NOTFOUND if the property does not exist or does not contain + * the given string + */ +int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property, + const char *string); + +/** + * fdt_stringlist_get() - obtain the string at a given index in a string list + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @property: name of the property containing the string list + * @index: index of the string to return + * @lenp: return location for the string length or an error code on failure + * + * Note that this will successfully extract strings from properties with + * non-NUL-terminated values. For example on small-valued cell properties + * this function will return the empty string. + * + * If non-NULL, the length of the string (on success) or a negative error-code + * (on failure) will be stored in the integer pointer to by lenp. + * + * @return: + * A pointer to the string at the given index in the string list or NULL on + * failure. On success the length of the string will be stored in the memory + * location pointed to by the lenp parameter, if non-NULL. On failure one of + * the following negative error codes will be returned in the lenp parameter + * (if non-NULL): + * -FDT_ERR_BADVALUE if the property value is not NUL-terminated + * -FDT_ERR_NOTFOUND if the property does not exist + */ +const char *fdt_stringlist_get(const void *fdt, int nodeoffset, + const char *property, int index, + int *lenp); + +/**********************************************************************/ +/* Read-only functions (addressing related) */ +/**********************************************************************/ + +/** + * FDT_MAX_NCELLS - maximum value for #address-cells and #size-cells + * + * This is the maximum value for #address-cells, #size-cells and + * similar properties that will be processed by libfdt. IEE1275 + * requires that OF implementations handle values up to 4. + * Implementations may support larger values, but in practice higher + * values aren't used. + */ +#define FDT_MAX_NCELLS 4 + +/** + * fdt_address_cells - retrieve address size for a bus represented in the tree + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to find the address size for + * + * When the node has a valid #address-cells property, returns its value. + * + * returns: + * 0 <= n < FDT_MAX_NCELLS, on success + * 2, if the node has no #address-cells property + * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid + * #address-cells property + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_address_cells(const void *fdt, int nodeoffset); + +/** + * fdt_size_cells - retrieve address range size for a bus represented in the + * tree + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to find the address range size for + * + * When the node has a valid #size-cells property, returns its value. + * + * returns: + * 0 <= n < FDT_MAX_NCELLS, on success + * 2, if the node has no #address-cells property + * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid + * #size-cells property + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_size_cells(const void *fdt, int nodeoffset); + + +/**********************************************************************/ +/* Write-in-place functions */ +/**********************************************************************/ + +/** + * fdt_setprop_inplace_namelen_partial - change a property's value, + * but not its size + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @namelen: number of characters of name to consider + * @idx: index of the property to change in the array + * @val: pointer to data to replace the property value with + * @len: length of the property value + * + * Identical to fdt_setprop_inplace(), but modifies the given property + * starting from the given index, and using only the first characters + * of the name. It is useful when you want to manipulate only one value of + * an array and you have a string that doesn't end with \0. + */ +int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset, + const char *name, int namelen, + uint32_t idx, const void *val, + int len); + +/** + * fdt_setprop_inplace - change a property's value, but not its size + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: pointer to data to replace the property value with + * @len: length of the property value + * + * fdt_setprop_inplace() replaces the value of a given property with + * the data in val, of length len. This function cannot change the + * size of a property, and so will only work if len is equal to the + * current length of the property. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if len is not equal to the property's current length + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value to replace the property with + * + * fdt_setprop_inplace_u32() replaces the value of a given property + * with the 32-bit integer value in val, converting val to big-endian + * if necessary. This function cannot change the size of a property, + * and so will only work if the property already exists and has length + * 4. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + fdt32_t tmp = cpu_to_fdt32(val); + return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value to replace the property with + * + * fdt_setprop_inplace_u64() replaces the value of a given property + * with the 64-bit integer value in val, converting val to big-endian + * if necessary. This function cannot change the size of a property, + * and so will only work if the property already exists and has length + * 8. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if the property's length is not equal to 8 + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset, + const char *name, uint64_t val) +{ + fdt64_t tmp = cpu_to_fdt64(val); + return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_setprop_inplace_cell - change the value of a single-cell property + * + * This is an alternative name for fdt_setprop_inplace_u32() + */ +static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val); +} + +/** + * fdt_nop_property - replace a property with nop tags + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to nop + * @name: name of the property to nop + * + * fdt_nop_property() will replace a given property's representation + * in the blob with FDT_NOP tags, effectively removing it from the + * tree. + * + * This function will alter only the bytes in the blob which contain + * the property, and will not alter or move any other part of the + * tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_nop_property(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_nop_node - replace a node (subtree) with nop tags + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to nop + * + * fdt_nop_node() will replace a given node's representation in the + * blob, including all its subnodes, if any, with FDT_NOP tags, + * effectively removing it from the tree. + * + * This function will alter only the bytes in the blob which contain + * the node and its properties and subnodes, and will not alter or + * move any other part of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_nop_node(void *fdt, int nodeoffset); + +/**********************************************************************/ +/* Sequential write functions */ +/**********************************************************************/ + +int fdt_create(void *buf, int bufsize); +int fdt_resize(void *fdt, void *buf, int bufsize); +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); +int fdt_finish_reservemap(void *fdt); +int fdt_begin_node(void *fdt, const char *name); +int fdt_property(void *fdt, const char *name, const void *val, int len); +static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val) +{ + fdt32_t tmp = cpu_to_fdt32(val); + return fdt_property(fdt, name, &tmp, sizeof(tmp)); +} +static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val) +{ + fdt64_t tmp = cpu_to_fdt64(val); + return fdt_property(fdt, name, &tmp, sizeof(tmp)); +} +static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) +{ + return fdt_property_u32(fdt, name, val); +} +#define fdt_property_string(fdt, name, str) \ + fdt_property(fdt, name, str, strlen(str)+1) +int fdt_end_node(void *fdt); +int fdt_finish(void *fdt); + +/**********************************************************************/ +/* Read-write functions */ +/**********************************************************************/ + +int fdt_create_empty_tree(void *buf, int bufsize); +int fdt_open_into(const void *fdt, void *buf, int bufsize); +int fdt_pack(void *fdt); + +/** + * fdt_add_mem_rsv - add one memory reserve map entry + * @fdt: pointer to the device tree blob + * @address, @size: 64-bit values (native endian) + * + * Adds a reserve map entry to the given blob reserving a region at + * address address of length size. + * + * This function will insert data into the reserve map and will + * therefore change the indexes of some entries in the table. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new reservation entry + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); + +/** + * fdt_del_mem_rsv - remove a memory reserve map entry + * @fdt: pointer to the device tree blob + * @n: entry to remove + * + * fdt_del_mem_rsv() removes the n-th memory reserve map entry from + * the blob. + * + * This function will delete data from the reservation table and will + * therefore change the indexes of some entries in the table. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there + * are less than n+1 reserve map entries) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_del_mem_rsv(void *fdt, int n); + +/** + * fdt_set_name - change the name of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of a node + * @name: name to give the node + * + * fdt_set_name() replaces the name (including unit address, if any) + * of the given node with the given string. NOTE: this function can't + * efficiently check if the new name is unique amongst the given + * node's siblings; results are undefined if this function is invoked + * with a name equal to one of the given node's siblings. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob + * to contain the new name + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_set_name(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_setprop - create or change a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: pointer to data to set the property value to + * @len: length of the property value + * + * fdt_setprop() sets the value of the named property in the given + * node to the given value and length, creating the property if it + * does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_setprop_u32 - set a property to a 32-bit integer + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value for the property (native endian) + * + * fdt_setprop_u32() sets the value of the named property in the given + * node to the given 32-bit integer value (converting to big-endian if + * necessary), or creates a new property with that value if it does + * not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name, + uint32_t val) +{ + fdt32_t tmp = cpu_to_fdt32(val); + return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_setprop_u64 - set a property to a 64-bit integer + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value for the property (native endian) + * + * fdt_setprop_u64() sets the value of the named property in the given + * node to the given 64-bit integer value (converting to big-endian if + * necessary), or creates a new property with that value if it does + * not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name, + uint64_t val) +{ + fdt64_t tmp = cpu_to_fdt64(val); + return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_setprop_cell - set a property to a single cell value + * + * This is an alternative name for fdt_setprop_u32() + */ +static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, + uint32_t val) +{ + return fdt_setprop_u32(fdt, nodeoffset, name, val); +} + +/** + * fdt_setprop_string - set a property to a string value + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @str: string value for the property + * + * fdt_setprop_string() sets the value of the named property in the + * given node to the given string value (using the length of the + * string to determine the new length of the property), or creates a + * new property with that value if it does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#define fdt_setprop_string(fdt, nodeoffset, name, str) \ + fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) + + +/** + * fdt_setprop_empty - set a property to an empty value + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * + * fdt_setprop_empty() sets the value of the named property in the + * given node to an empty (zero length) value, or creates a new empty + * property if it does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#define fdt_setprop_empty(fdt, nodeoffset, name) \ + fdt_setprop((fdt), (nodeoffset), (name), NULL, 0) + +/** + * fdt_appendprop - append to or create a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to append to + * @val: pointer to data to append to the property value + * @len: length of the data to append to the property value + * + * fdt_appendprop() appends the value to the named property in the + * given node, creating the property if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_appendprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_appendprop_u32 - append a 32-bit integer value to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value to append to the property (native endian) + * + * fdt_appendprop_u32() appends the given 32-bit integer value + * (converting to big-endian if necessary) to the value of the named + * property in the given node, or creates a new property with that + * value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_appendprop_u32(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + fdt32_t tmp = cpu_to_fdt32(val); + return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_appendprop_u64 - append a 64-bit integer value to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value to append to the property (native endian) + * + * fdt_appendprop_u64() appends the given 64-bit integer value + * (converting to big-endian if necessary) to the value of the named + * property in the given node, or creates a new property with that + * value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_appendprop_u64(void *fdt, int nodeoffset, + const char *name, uint64_t val) +{ + fdt64_t tmp = cpu_to_fdt64(val); + return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_appendprop_cell - append a single cell value to a property + * + * This is an alternative name for fdt_appendprop_u32() + */ +static inline int fdt_appendprop_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + return fdt_appendprop_u32(fdt, nodeoffset, name, val); +} + +/** + * fdt_appendprop_string - append a string to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @str: string value to append to the property + * + * fdt_appendprop_string() appends the given string to the value of + * the named property in the given node, or creates a new property + * with that value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#define fdt_appendprop_string(fdt, nodeoffset, name, str) \ + fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) + +/** + * fdt_delprop - delete a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to nop + * @name: name of the property to nop + * + * fdt_del_property() will delete the given property. + * + * This function will delete data from the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_delprop(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_add_subnode_namelen - creates a new node based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_add_subnode(), but use only the first namelen + * characters of name as the name of the new node. This is useful for + * creating subnodes based on a portion of a larger string, such as a + * full path. + */ +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen); + +/** + * fdt_add_subnode - creates a new node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_add_subnode() creates a new node as a subnode of the node at + * structure block offset parentoffset, with the given name (which + * should include the unit address, if any). + * + * This function will insert data into the blob, and will therefore + * change the offsets of some existing nodes. + + * returns: + * structure block offset of the created nodeequested subnode (>=0), on + * success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE + * tag + * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of + * the given name + * -FDT_ERR_NOSPACE, if there is insufficient free space in the + * blob to contain the new node + * -FDT_ERR_NOSPACE + * -FDT_ERR_BADLAYOUT + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_add_subnode(void *fdt, int parentoffset, const char *name); + +/** + * fdt_del_node - delete a node (subtree) + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to nop + * + * fdt_del_node() will remove the given node, including all its + * subnodes if any, from the blob. + * + * This function will delete data from the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_del_node(void *fdt, int nodeoffset); + +/** + * fdt_overlay_apply - Applies a DT overlay on a base DT + * @fdt: pointer to the base device tree blob + * @fdto: pointer to the device tree overlay blob + * + * fdt_overlay_apply() will apply the given device tree overlay on the + * given base device tree. + * + * Expect the base device tree to be modified, even if the function + * returns an error. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there's not enough space in the base device tree + * -FDT_ERR_NOTFOUND, the overlay points to some inexistant nodes or + * properties in the base DT + * -FDT_ERR_BADPHANDLE, + * -FDT_ERR_BADOVERLAY, + * -FDT_ERR_NOPHANDLES, + * -FDT_ERR_INTERNAL, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADOFFSET, + * -FDT_ERR_BADPATH, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_overlay_apply(void *fdt, void *fdto); + +/**********************************************************************/ +/* Debugging / informational functions */ +/**********************************************************************/ + +const char *fdt_strerror(int errval); + +#endif /* _LIBFDT_H */ |