diff options
Diffstat (limited to 'tools')
62 files changed, 2116 insertions, 171 deletions
diff --git a/tools/binman/README b/tools/binman/README index 9d9d1832ee..b64dedf2eb 100644 --- a/tools/binman/README +++ b/tools/binman/README @@ -330,9 +330,13 @@ image-pos: for each entry. This makes it easy to find out exactly where the entry ended up in the image, regardless of parent sections, etc. +expand-size: + Expand the size of this entry to fit available space. This space is only + limited by the size of the image/section and the position of the next + entry. -The attributes supported for images are described below. Several are similar -to those for entries. +The attributes supported for images and sections are described below. Several +are similar to those for entries. size: Sets the image size in bytes, for example 'size = <0x100000>' for a @@ -397,6 +401,15 @@ end-at-4gb: 8MB ROM, the offset of the first entry would be 0xfff80000 with this option, instead of 0 without this option. +skip-at-start: + This property specifies the entry offset of the first entry. + + For PowerPC mpc85xx based CPU, CONFIG_SYS_TEXT_BASE is the entry + offset of the first entry. It can be 0xeff40000 or 0xfff40000 for + nor flash boot, 0x201000 for sd boot etc. + + 'end-at-4gb' property is not applicable where CONFIG_SYS_TEXT_BASE + + Image size != 4gb. Examples of the above options can be found in the tests. See the tools/binman/test directory. @@ -462,15 +475,26 @@ see README.entries. This is generated from the source code using: binman -E >tools/binman/README.entries -Special properties ------------------- +Hashing Entries +--------------- + +It is possible to ask binman to hash the contents of an entry and write that +value back to the device-tree node. For example: + + binman { + u-boot { + hash { + algo = "sha256"; + }; + }; + }; -Some entries support special properties, documented here: +Here, a new 'value' property will be written to the 'hash' node containing +the hash of the 'u-boot' entry. Only SHA256 is supported at present. Whole +sections can be hased if desired, by adding the 'hash' node to the section. -u-boot-with-ucode-ptr: - optional-ucode: boolean property to make microcode optional. If the - u-boot.bin image does not include microcode, no error will - be generated. +The has value can be chcked at runtime by hashing the data actually read and +comparing this has to the value in the device tree. Order of image creation @@ -604,6 +628,22 @@ the device tree. These can be used by U-Boot at run-time to find the location of each entry. +Compression +----------- + +Binman support compression for 'blob' entries (those of type 'blob' and +derivatives). To enable this for an entry, add a 'compression' property: + + blob { + filename = "datafile"; + compression = "lz4"; + }; + +The entry will then contain the compressed data, using the 'lz4' compression +algorithm. Currently this is the only one that is supported. + + + Map files --------- diff --git a/tools/binman/README.entries b/tools/binman/README.entries index c6e7b22609..9fc2f83280 100644 --- a/tools/binman/README.entries +++ b/tools/binman/README.entries @@ -19,11 +19,27 @@ class by other entry types. Properties / Entry arguments: - filename: Filename of file to read into entry + - compress: Compression algorithm to use: + none: No compression + lz4: Use lz4 compression (via 'lz4' command-line utility) This entry reads data from a file and places it in the entry. The default filename is often specified specified by the subclass. See for example the 'u_boot' entry which provides the filename 'u-boot.bin'. +If compression is enabled, an extra 'uncomp-size' property is written to +the node (if enabled with -u) which provides the uncompressed size of the +data. + + + +Entry: blob-dtb: A blob that holds a device tree +------------------------------------------------ + +This is a blob containing a device tree. The contents of the blob are +obtained from the list of available device-tree files, managed by the +'state' module. + Entry: blob-named-by-arg: A blob entry which gets its filename property from its subclass @@ -55,6 +71,21 @@ updating the EC on startup via software sync. +Entry: files: Entry containing a set of files +--------------------------------------------- + +Properties / Entry arguments: + - pattern: Filename pattern to match the files to include + - compress: Compression algorithm to use: + none: No compression + lz4: Use lz4 compression (via 'lz4' command-line utility) + +This entry reads a number of files and places each in a separate sub-entry +within this entry. To access these you need to enable device-tree updates +at run-time so you can obtain the file positions. + + + Entry: fill: An entry which is filled to a particular byte value ---------------------------------------------------------------- @@ -221,6 +252,18 @@ See README.x86 for information about Intel binary blobs. +Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code for U-Boot +----------------------------------------------------------------------------------------- + +Properties / Entry arguments: + - filename: Filename of u-boot-br.bin (default 'u-boot-br.bin') + +This enrty is valid for PowerPC mpc85xx cpus. This entry holds +'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be +placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'. + + + Entry: section: Entry that contains other entries ------------------------------------------------- @@ -309,6 +352,9 @@ This is the U-Boot device tree, containing configuration information for U-Boot. U-Boot needs this to know what devices are present and which drivers to activate. +Note: This is mostly an internal entry type, used by others. This allows +binman to know which entries contain a device tree. + Entry: u-boot-dtb-with-ucode: A U-Boot device tree file, with the microcode removed @@ -327,6 +373,17 @@ it available to u_boot_ucode. +Entry: u-boot-elf: U-Boot ELF image +----------------------------------- + +Properties / Entry arguments: + - filename: Filename of u-boot (default 'u-boot') + +This is the U-Boot ELF image. It does not include a device tree but can be +relocated to any address for execution. + + + Entry: u-boot-img: U-Boot legacy image -------------------------------------- @@ -410,6 +467,17 @@ to activate. +Entry: u-boot-spl-elf: U-Boot SPL ELF image +------------------------------------------- + +Properties / Entry arguments: + - filename: Filename of SPL u-boot (default 'spl/u-boot') + +This is the U-Boot SPL ELF image. It does not include a device tree but can +be relocated to any address for execution. + + + Entry: u-boot-spl-nodtb: SPL binary without device tree appended ---------------------------------------------------------------- @@ -428,6 +496,8 @@ both SPL and the device tree). Entry: u-boot-spl-with-ucode-ptr: U-Boot SPL with embedded microcode pointer ---------------------------------------------------------------------------- +This is used when SPL must set up the microcode for U-Boot. + See Entry_u_boot_ucode for full details of the entries involved in this process. @@ -469,6 +539,24 @@ to activate. +Entry: u-boot-tpl-dtb-with-ucode: U-Boot TPL with embedded microcode pointer +---------------------------------------------------------------------------- + +This is used when TPL must set up the microcode for U-Boot. + +See Entry_u_boot_ucode for full details of the entries involved in this +process. + + + +Entry: u-boot-tpl-with-ucode-ptr: U-Boot TPL with embedded microcode pointer +---------------------------------------------------------------------------- + +See Entry_u_boot_ucode for full details of the entries involved in this +process. + + + Entry: u-boot-ucode: U-Boot microcode block ------------------------------------------- @@ -524,6 +612,9 @@ Entry: u-boot-with-ucode-ptr: U-Boot with embedded microcode pointer Properties / Entry arguments: - filename: Filename of u-boot-nodtb.dtb (default 'u-boot-nodtb.dtb') + - optional-ucode: boolean property to make microcode optional. If the + u-boot.bin image does not include microcode, no error will + be generated. See Entry_u_boot_ucode for full details of the three entries involved in this process. This entry updates U-Boot with the offset and size of the @@ -543,7 +634,12 @@ Properties / Entry arguments: - kernelkey: Name of the kernel key to use (inside keydir) - preamble-flags: Value of the vboot preamble flags (typically 0) -Chromium OS signs the read-write firmware and kernel, writing the signature +Output files: + - input.<unique_name> - input file passed to futility + - vblock.<unique_name> - output file generated by futility (which is + used as the entry contents) + +Chromium OS signs the read-write firmware and kernel, writing the signature in this block. This allows U-Boot to verify that the next firmware stage and kernel are genuine. @@ -583,3 +679,20 @@ For 32-bit U-Boot, the 'x86_start16' entry type is used instead. +Entry: x86-start16-tpl: x86 16-bit start-up code for TPL +-------------------------------------------------------- + +Properties / Entry arguments: + - filename: Filename of tpl/u-boot-x86-16bit-tpl.bin (default + 'tpl/u-boot-x86-16bit-tpl.bin') + +x86 CPUs start up in 16-bit mode, even if they are 64-bit CPUs. This code +must be placed at a particular address. This entry holds that code. It is +typically placed at offset CONFIG_SYS_X86_START16. The code is responsible +for changing to 32-bit mode and starting TPL, which in turn jumps to SPL. + +If TPL is not being used, the 'x86_start16_spl or 'x86_start16' entry types +may be used instead. + + + diff --git a/tools/binman/bsection.py b/tools/binman/bsection.py index a0bd1b6d34..ccf2920c5b 100644 --- a/tools/binman/bsection.py +++ b/tools/binman/bsection.py @@ -8,10 +8,12 @@ from __future__ import print_function from collections import OrderedDict +from sets import Set import sys import fdt_util import re +import state import tools class Section(object): @@ -22,6 +24,7 @@ class Section(object): Attributes: _node: Node object that contains the section definition in device tree + _parent_section: Parent Section object which created this Section _size: Section size in bytes, or None if not known yet _align_size: Section size alignment, or None _pad_before: Number of bytes before the first entry starts. This @@ -44,14 +47,16 @@ class Section(object): section _entries: OrderedDict() of entries """ - def __init__(self, name, node, test=False): + def __init__(self, name, parent_section, node, image, test=False): global entry global Entry import entry from entry import Entry + self._parent_section = parent_section self._name = name self._node = node + self._image = image self._offset = 0 self._size = None self._align_size = None @@ -59,10 +64,11 @@ class Section(object): self._pad_after = 0 self._pad_byte = 0 self._sort = False - self._skip_at_start = 0 + self._skip_at_start = None self._end_4gb = False self._name_prefix = '' self._entries = OrderedDict() + self._image_pos = None if not test: self._ReadNode() self._ReadEntries() @@ -79,33 +85,57 @@ class Section(object): self._pad_byte = fdt_util.GetInt(self._node, 'pad-byte', 0) self._sort = fdt_util.GetBool(self._node, 'sort-by-offset') self._end_4gb = fdt_util.GetBool(self._node, 'end-at-4gb') - if self._end_4gb and not self._size: - self._Raise("Section size must be provided when using end-at-4gb") + self._skip_at_start = fdt_util.GetInt(self._node, 'skip-at-start') if self._end_4gb: - self._skip_at_start = 0x100000000 - self._size + if not self._size: + self._Raise("Section size must be provided when using end-at-4gb") + if self._skip_at_start is not None: + self._Raise("Provide either 'end-at-4gb' or 'skip-at-start'") + else: + self._skip_at_start = 0x100000000 - self._size + else: + if self._skip_at_start is None: + self._skip_at_start = 0 self._name_prefix = fdt_util.GetString(self._node, 'name-prefix') def _ReadEntries(self): for node in self._node.subnodes: + if node.name == 'hash': + continue entry = Entry.Create(self, node) entry.SetPrefix(self._name_prefix) self._entries[node.name] = entry + def GetFdtSet(self): + """Get the set of device tree files used by this image""" + fdt_set = Set() + for entry in self._entries.values(): + fdt_set.update(entry.GetFdtSet()) + return fdt_set + def SetOffset(self, offset): self._offset = offset + def ExpandEntries(self): + for entry in self._entries.values(): + entry.ExpandEntries() + def AddMissingProperties(self): """Add new properties to the device tree as needed for this entry""" for prop in ['offset', 'size', 'image-pos']: if not prop in self._node.props: - self._node.AddZeroProp(prop) + state.AddZeroProp(self._node, prop) + state.CheckAddHashProp(self._node) for entry in self._entries.values(): entry.AddMissingProperties() def SetCalculatedProperties(self): - self._node.SetInt('offset', self._offset) - self._node.SetInt('size', self._size) - self._node.SetInt('image-pos', self._image_pos) + state.SetInt(self._node, 'offset', self._offset) + state.SetInt(self._node, 'size', self._size) + image_pos = self._image_pos + if self._parent_section: + image_pos -= self._parent_section.GetRootSkipAtStart() + state.SetInt(self._node, 'image-pos', image_pos) for entry in self._entries.values(): entry.SetCalculatedProperties() @@ -240,16 +270,32 @@ class Section(object): for entry in entries: self._entries[entry._node.name] = entry + def _ExpandEntries(self): + """Expand any entries that are permitted to""" + exp_entry = None + for entry in self._entries.values(): + if exp_entry: + exp_entry.ExpandToLimit(entry.offset) + exp_entry = None + if entry.expand_size: + exp_entry = entry + if exp_entry: + exp_entry.ExpandToLimit(self._size) + def CheckEntries(self): - """Check that entries do not overlap or extend outside the section""" + """Check that entries do not overlap or extend outside the section + + This also sorts entries, if needed and expands + """ if self._sort: self._SortEntries() + self._ExpandEntries() offset = 0 prev_name = 'None' for entry in self._entries.values(): entry.CheckOffset() if (entry.offset < self._skip_at_start or - entry.offset >= self._skip_at_start + self._size): + entry.offset + entry.size > self._skip_at_start + self._size): entry.Raise("Offset %#x (%d) is outside the section starting " "at %#x (%d)" % (entry.offset, entry.offset, self._skip_at_start, @@ -402,7 +448,17 @@ class Section(object): source_entry.Raise("Cannot find node for phandle %d" % phandle) for entry in self._entries.values(): if entry._node == node: - if entry.data is None: - return None - return entry.data + return entry.GetData() source_entry.Raise("Cannot find entry for node '%s'" % node.name) + + def ExpandSize(self, size): + if size != self._size: + self._size = size + + def GetRootSkipAtStart(self): + if self._parent_section: + return self._parent_section.GetRootSkipAtStart() + return self._skip_at_start + + def GetImageSize(self): + return self._image._size diff --git a/tools/binman/cmdline.py b/tools/binman/cmdline.py index f0de4ded44..f8caa7d284 100644 --- a/tools/binman/cmdline.py +++ b/tools/binman/cmdline.py @@ -30,6 +30,10 @@ def ParseArgs(argv): help='Enabling debugging (provides a full traceback on error)') parser.add_option('-E', '--entry-docs', action='store_true', help='Write out entry documentation (see README.entries)') + parser.add_option('--fake-dtb', action='store_true', + help='Use fake device tree contents (for testing only)') + parser.add_option('-i', '--image', type='string', action='append', + help='Image filename to build (if not specified, build all)') parser.add_option('-I', '--indir', action='append', help='Add a path to a directory to use for input files') parser.add_option('-H', '--full-help', action='store_true', diff --git a/tools/binman/control.py b/tools/binman/control.py index 2de1c86ecf..3446e2e79c 100644 --- a/tools/binman/control.py +++ b/tools/binman/control.py @@ -7,27 +7,19 @@ from collections import OrderedDict import os -import re import sys import tools import command import elf from image import Image +import state import tout # List of images we plan to create # Make this global so that it can be referenced from tests images = OrderedDict() -# Records the device-tree files known to binman, keyed by filename (e.g. -# 'u-boot-spl.dtb') -fdt_files = {} - -# Arguments passed to binman to provide arguments to entries -entry_args = {} - - def _ReadImageDesc(binman_node): """Read the image descriptions from the /binman node @@ -60,39 +52,15 @@ def _FindBinmanNode(dtb): return node return None -def GetFdt(fname): - """Get the Fdt object for a particular device-tree filename - - Binman keeps track of at least one device-tree file called u-boot.dtb but - can also have others (e.g. for SPL). This function looks up the given - filename and returns the associated Fdt object. +def WriteEntryDocs(modules, test_missing=None): + """Write out documentation for all entries Args: - fname: Filename to look up (e.g. 'u-boot.dtb'). - - Returns: - Fdt object associated with the filename + modules: List of Module objects to get docs for + test_missing: Used for testing only, to force an entry's documeentation + to show as missing even if it is present. Should be set to None in + normal use. """ - return fdt_files[fname] - -def GetFdtPath(fname): - return fdt_files[fname]._fname - -def SetEntryArgs(args): - global entry_args - - entry_args = {} - if args: - for arg in args: - m = re.match('([^=]*)=(.*)', arg) - if not m: - raise ValueError("Invalid entry arguemnt '%s'" % arg) - entry_args[m.group(1)] = m.group(2) - -def GetEntryArg(name): - return entry_args.get(name) - -def WriteEntryDocs(modules, test_missing=None): from entry import Entry Entry.WriteDocs(modules, test_missing) @@ -138,23 +106,20 @@ def Binman(options, args): tout.Init(options.verbosity) elf.debug = options.debug + state.use_fake_dtb = options.fake_dtb try: tools.SetInputDirs(options.indir) tools.PrepareOutputDir(options.outdir, options.preserve) - SetEntryArgs(options.entry_arg) + state.SetEntryArgs(options.entry_arg) # Get the device tree ready by compiling it and copying the compiled # output into a file in our output directly. Then scan it for use # in binman. dtb_fname = fdt_util.EnsureCompiled(dtb_fname) - fname = tools.GetOutputFilename('u-boot-out.dtb') - with open(dtb_fname) as infd: - with open(fname, 'wb') as outfd: - outfd.write(infd.read()) + fname = tools.GetOutputFilename('u-boot.dtb.out') + tools.WriteFile(fname, tools.ReadFile(dtb_fname)) dtb = fdt.FdtScan(fname) - # Note the file so that GetFdt() can find it - fdt_files['u-boot.dtb'] = dtb node = _FindBinmanNode(dtb) if not node: raise ValueError("Device tree '%s' does not have a 'binman' " @@ -162,6 +127,17 @@ def Binman(options, args): images = _ReadImageDesc(node) + if options.image: + skip = [] + for name, image in images.iteritems(): + if name not in options.image: + del images[name] + skip.append(name) + if skip: + print 'Skipping images: %s\n' % ', '.join(skip) + + state.Prepare(images, dtb) + # Prepare the device tree by making sure that any missing # properties are added (e.g. 'pos' and 'size'). The values of these # may not be correct yet, but we add placeholders so that the @@ -170,12 +146,15 @@ def Binman(options, args): # without changing the device-tree size, thus ensuring that our # entry offsets remain the same. for image in images.values(): + image.ExpandEntries() if options.update_fdt: image.AddMissingProperties() image.ProcessFdt(dtb) - dtb.Pack() - dtb.Flush() + for dtb_item in state.GetFdts(): + dtb_item.Sync(auto_resize=True) + dtb_item.Pack() + dtb_item.Flush() for image in images.values(): # Perform all steps for this image, including checking and @@ -184,19 +163,30 @@ def Binman(options, args): # completed and written, but that does not seem important. image.GetEntryContents() image.GetEntryOffsets() - image.PackEntries() - image.CheckSize() - image.CheckEntries() + try: + image.PackEntries() + image.CheckSize() + image.CheckEntries() + except Exception as e: + if options.map: + fname = image.WriteMap() + print "Wrote map file '%s' to show errors" % fname + raise image.SetImagePos() if options.update_fdt: image.SetCalculatedProperties() + for dtb_item in state.GetFdts(): + dtb_item.Sync() image.ProcessEntryContents() image.WriteSymbols() image.BuildImage() if options.map: image.WriteMap() - with open(fname, 'wb') as outfd: - outfd.write(dtb.GetContents()) + + # Write the updated FDTs to our output files + for dtb_item in state.GetFdts(): + tools.WriteFile(dtb_item._fname, dtb_item.GetContents()) + finally: tools.FinaliseOutputDir() finally: diff --git a/tools/binman/entry.py b/tools/binman/entry.py index 77cfab9c5d..648cfd241f 100644 --- a/tools/binman/entry.py +++ b/tools/binman/entry.py @@ -17,10 +17,12 @@ try: except: have_importlib = False -import fdt_util -import control import os +from sets import Set import sys + +import fdt_util +import state import tools modules = {} @@ -74,6 +76,7 @@ class Entry(object): self.pad_after = 0 self.offset_unset = False self.image_pos = None + self._expand_size = False if read_node: self.ReadNode() @@ -159,20 +162,57 @@ class Entry(object): "of two" % (self._node.path, self.align_size)) self.align_end = fdt_util.GetInt(self._node, 'align-end') self.offset_unset = fdt_util.GetBool(self._node, 'offset-unset') + self.expand_size = fdt_util.GetBool(self._node, 'expand-size') + + def GetDefaultFilename(self): + return None + + def GetFdtSet(self): + """Get the set of device trees used by this entry + + Returns: + Set containing the filename from this entry, if it is a .dtb, else + an empty set + """ + fname = self.GetDefaultFilename() + # It would be better to use isinstance(self, Entry_blob_dtb) here but + # we cannot access Entry_blob_dtb + if fname and fname.endswith('.dtb'): + return Set([fname]) + return Set() + + def ExpandEntries(self): + pass def AddMissingProperties(self): """Add new properties to the device tree as needed for this entry""" for prop in ['offset', 'size', 'image-pos']: if not prop in self._node.props: - self._node.AddZeroProp(prop) + state.AddZeroProp(self._node, prop) + err = state.CheckAddHashProp(self._node) + if err: + self.Raise(err) def SetCalculatedProperties(self): """Set the value of device-tree properties calculated by binman""" - self._node.SetInt('offset', self.offset) - self._node.SetInt('size', self.size) - self._node.SetInt('image-pos', self.image_pos) + state.SetInt(self._node, 'offset', self.offset) + state.SetInt(self._node, 'size', self.size) + state.SetInt(self._node, 'image-pos', + self.image_pos - self.section.GetRootSkipAtStart()) + state.CheckSetHashValue(self._node, self.GetData) def ProcessFdt(self, fdt): + """Allow entries to adjust the device tree + + Some entries need to adjust the device tree for their purposes. This + may involve adding or deleting properties. + + Returns: + True if processing is complete + False if processing could not be completed due to a dependency. + This will cause the entry to be retried after others have been + called + """ return True def SetPrefix(self, prefix): @@ -351,9 +391,16 @@ class Entry(object): pass @staticmethod + def GetStr(value): + if value is None: + return '<none> ' + return '%08x' % value + + @staticmethod def WriteMapLine(fd, indent, name, offset, size, image_pos): - print('%08x %s%08x %08x %s' % (image_pos, ' ' * indent, offset, - size, name), file=fd) + print('%s %s%s %s %s' % (Entry.GetStr(image_pos), ' ' * indent, + Entry.GetStr(offset), Entry.GetStr(size), + name), file=fd) def WriteMap(self, fd, indent): """Write a map of the entry to a .map file @@ -390,7 +437,7 @@ class Entry(object): Raises: ValueError if the argument cannot be converted to in """ - value = control.GetEntryArg(name) + value = state.GetEntryArg(name) if value is not None: if datatype == int: try: @@ -456,3 +503,30 @@ features to produce new behaviours. if missing: raise ValueError('Documentation is missing for modules: %s' % ', '.join(missing)) + + def GetUniqueName(self): + """Get a unique name for a node + + Returns: + String containing a unique name for a node, consisting of the name + of all ancestors (starting from within the 'binman' node) separated + by a dot ('.'). This can be useful for generating unique filesnames + in the output directory. + """ + name = self.name + node = self._node + while node.parent: + node = node.parent + if node.name == 'binman': + break + name = '%s.%s' % (node.name, name) + return name + + def ExpandToLimit(self, limit): + """Expand an entry so that it ends at the given offset limit""" + if self.offset + self.size < limit: + self.size = limit - self.offset + # Request the contents again, since changing the size requires that + # the data grows. This should not fail, but check it to be sure. + if not self.ObtainContents(): + self.Raise('Cannot obtain contents when expanding entry') diff --git a/tools/binman/entry_test.py b/tools/binman/entry_test.py index 6fa735ed59..69d85b4ced 100644 --- a/tools/binman/entry_test.py +++ b/tools/binman/entry_test.py @@ -54,6 +54,22 @@ class TestEntry(unittest.TestCase): self.assertIn("Unknown entry type 'invalid-name' in node " "'invalid-path'", str(e.exception)) + def testUniqueName(self): + """Test Entry.GetUniqueName""" + import entry + Node = collections.namedtuple('Node', ['name', 'parent']) + base_node = Node('root', None) + base_entry = entry.Entry(None, None, base_node, read_node=False) + self.assertEqual('root', base_entry.GetUniqueName()) + sub_node = Node('subnode', base_node) + sub_entry = entry.Entry(None, None, sub_node, read_node=False) + self.assertEqual('root.subnode', sub_entry.GetUniqueName()) + + def testGetDefaultFilename(self): + """Trivial test for this base class function""" + import entry + base_entry = entry.Entry(None, None, None, read_node=False) + self.assertIsNone(base_entry.GetDefaultFilename()) if __name__ == "__main__": unittest.main() diff --git a/tools/binman/etype/_testing.py b/tools/binman/etype/_testing.py index 02c165c0c3..3e345bd952 100644 --- a/tools/binman/etype/_testing.py +++ b/tools/binman/etype/_testing.py @@ -48,6 +48,8 @@ class Entry__testing(Entry): 'return-unknown-contents') self.bad_update_contents = fdt_util.GetBool(self._node, 'bad-update-contents') + self.return_contents_once = fdt_util.GetBool(self._node, + 'return-contents-once') # Set to True when the entry is ready to process the FDT. self.process_fdt_ready = False @@ -68,12 +70,15 @@ class Entry__testing(Entry): EntryArg('test-existing-prop', str)], self.require_args) if self.force_bad_datatype: self.GetEntryArgsOrProps([EntryArg('test-bad-datatype-arg', bool)]) + self.return_contents = True def ObtainContents(self): - if self.return_unknown_contents: + if self.return_unknown_contents or not self.return_contents: return False self.data = 'a' self.contents_size = len(self.data) + if self.return_contents_once: + self.return_contents = False return True def GetOffsets(self): diff --git a/tools/binman/etype/blob.py b/tools/binman/etype/blob.py index 3f46eecf30..642a0e482a 100644 --- a/tools/binman/etype/blob.py +++ b/tools/binman/etype/blob.py @@ -7,6 +7,7 @@ from entry import Entry import fdt_util +import state import tools class Entry_blob(Entry): @@ -17,14 +18,23 @@ class Entry_blob(Entry): Properties / Entry arguments: - filename: Filename of file to read into entry + - compress: Compression algorithm to use: + none: No compression + lz4: Use lz4 compression (via 'lz4' command-line utility) This entry reads data from a file and places it in the entry. The default filename is often specified specified by the subclass. See for example the 'u_boot' entry which provides the filename 'u-boot.bin'. + + If compression is enabled, an extra 'uncomp-size' property is written to + the node (if enabled with -u) which provides the uncompressed size of the + data. """ def __init__(self, section, etype, node): Entry.__init__(self, section, etype, node) - self._filename = fdt_util.GetString(self._node, "filename", self.etype) + self._filename = fdt_util.GetString(self._node, 'filename', self.etype) + self._compress = fdt_util.GetString(self._node, 'compress', 'none') + self._uncompressed_size = None def ObtainContents(self): self._filename = self.GetDefaultFilename() @@ -33,15 +43,36 @@ class Entry_blob(Entry): return True def ReadBlobContents(self): - with open(self._pathname) as fd: - # We assume the data is small enough to fit into memory. If this - # is used for large filesystem image that might not be true. - # In that case, Image.BuildImage() could be adjusted to use a - # new Entry method which can read in chunks. Then we could copy - # the data in chunks and avoid reading it all at once. For now - # this seems like an unnecessary complication. - self.SetContents(fd.read()) + # We assume the data is small enough to fit into memory. If this + # is used for large filesystem image that might not be true. + # In that case, Image.BuildImage() could be adjusted to use a + # new Entry method which can read in chunks. Then we could copy + # the data in chunks and avoid reading it all at once. For now + # this seems like an unnecessary complication. + data = tools.ReadFile(self._pathname) + if self._compress == 'lz4': + self._uncompressed_size = len(data) + ''' + import lz4 # Import this only if needed (python-lz4 dependency) + + try: + data = lz4.frame.compress(data) + except AttributeError: + data = lz4.compress(data) + ''' + data = tools.Run('lz4', '-c', self._pathname, ) + self.SetContents(data) return True def GetDefaultFilename(self): return self._filename + + def AddMissingProperties(self): + Entry.AddMissingProperties(self) + if self._compress != 'none': + state.AddZeroProp(self._node, 'uncomp-size') + + def SetCalculatedProperties(self): + Entry.SetCalculatedProperties(self) + if self._uncompressed_size is not None: + state.SetInt(self._node, 'uncomp-size', self._uncompressed_size) diff --git a/tools/binman/etype/blob_dtb.py b/tools/binman/etype/blob_dtb.py new file mode 100644 index 0000000000..cc5b4a3f76 --- /dev/null +++ b/tools/binman/etype/blob_dtb.py @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2018 Google, Inc +# Written by Simon Glass <sjg@chromium.org> +# +# Entry-type module for U-Boot device tree files +# + +import state + +from entry import Entry +from blob import Entry_blob + +class Entry_blob_dtb(Entry_blob): + """A blob that holds a device tree + + This is a blob containing a device tree. The contents of the blob are + obtained from the list of available device-tree files, managed by the + 'state' module. + """ + def __init__(self, section, etype, node): + Entry_blob.__init__(self, section, etype, node) + + def ObtainContents(self): + """Get the device-tree from the list held by the 'state' module""" + self._filename = self.GetDefaultFilename() + self._pathname, data = state.GetFdtContents(self._filename) + self.SetContents(data) + return True + + def ProcessContents(self): + """Re-read the DTB contents so that we get any calculated properties""" + _, data = state.GetFdtContents(self._filename) + self.SetContents(data) diff --git a/tools/binman/etype/files.py b/tools/binman/etype/files.py new file mode 100644 index 0000000000..99f2f2f67f --- /dev/null +++ b/tools/binman/etype/files.py @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2018 Google, Inc +# Written by Simon Glass <sjg@chromium.org> +# +# Entry-type module for a set of files which are placed in individual +# sub-entries +# + +import glob +import os + +from section import Entry_section +import fdt_util +import state +import tools + +import bsection + +class Entry_files(Entry_section): + """Entry containing a set of files + + Properties / Entry arguments: + - pattern: Filename pattern to match the files to include + - compress: Compression algorithm to use: + none: No compression + lz4: Use lz4 compression (via 'lz4' command-line utility) + + This entry reads a number of files and places each in a separate sub-entry + within this entry. To access these you need to enable device-tree updates + at run-time so you can obtain the file positions. + """ + def __init__(self, section, etype, node): + Entry_section.__init__(self, section, etype, node) + self._pattern = fdt_util.GetString(self._node, 'pattern') + if not self._pattern: + self.Raise("Missing 'pattern' property") + self._compress = fdt_util.GetString(self._node, 'compress', 'none') + self._require_matches = fdt_util.GetBool(self._node, + 'require-matches') + + def ExpandEntries(self): + files = tools.GetInputFilenameGlob(self._pattern) + if self._require_matches and not files: + self.Raise("Pattern '%s' matched no files" % self._pattern) + for fname in files: + if not os.path.isfile(fname): + continue + name = os.path.basename(fname) + subnode = self._node.FindNode(name) + if not subnode: + subnode = state.AddSubnode(self._node, name) + state.AddString(subnode, 'type', 'blob') + state.AddString(subnode, 'filename', fname) + state.AddString(subnode, 'compress', self._compress) + + # Read entries again, now that we have some + self._section._ReadEntries() diff --git a/tools/binman/etype/fill.py b/tools/binman/etype/fill.py index 7210a8324a..dcfe978a5b 100644 --- a/tools/binman/etype/fill.py +++ b/tools/binman/etype/fill.py @@ -23,7 +23,7 @@ class Entry_fill(Entry): """ def __init__(self, section, etype, node): Entry.__init__(self, section, etype, node) - if not self.size: + if self.size is None: self.Raise("'fill' entry must have a size property") self.fill_value = fdt_util.GetByte(self._node, 'fill-byte', 0) diff --git a/tools/binman/etype/fmap.py b/tools/binman/etype/fmap.py index f1dd81ec49..bf35a5bbf4 100644 --- a/tools/binman/etype/fmap.py +++ b/tools/binman/etype/fmap.py @@ -42,14 +42,17 @@ class Entry_fmap(Entry): for subentry in entries.values(): _AddEntries(areas, subentry) else: - areas.append(fmap_util.FmapArea(entry.image_pos or 0, - entry.size or 0, entry.name, 0)) + pos = entry.image_pos + if pos is not None: + pos -= entry.section.GetRootSkipAtStart() + areas.append(fmap_util.FmapArea(pos or 0, entry.size or 0, + entry.name, 0)) - entries = self.section.GetEntries() + entries = self.section._image.GetEntries() areas = [] for entry in entries.values(): _AddEntries(areas, entry) - return fmap_util.EncodeFmap(self.section.GetSize() or 0, self.name, + return fmap_util.EncodeFmap(self.section.GetImageSize() or 0, self.name, areas) def ObtainContents(self): diff --git a/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py b/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py new file mode 100644 index 0000000000..59fedd2b54 --- /dev/null +++ b/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2018 NXP +# +# Entry-type module for the PowerPC mpc85xx bootpg and resetvec code for U-Boot +# + +from entry import Entry +from blob import Entry_blob + +class Entry_powerpc_mpc85xx_bootpg_resetvec(Entry_blob): + """PowerPC mpc85xx bootpg + resetvec code for U-Boot + + Properties / Entry arguments: + - filename: Filename of u-boot-br.bin (default 'u-boot-br.bin') + + This enrty is valid for PowerPC mpc85xx cpus. This entry holds + 'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be + placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'. + """ + + def __init__(self, section, etype, node): + Entry_blob.__init__(self, section, etype, node) + + def GetDefaultFilename(self): + return 'u-boot-br.bin' diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py index f5b2ed67cf..7f1b413604 100644 --- a/tools/binman/etype/section.py +++ b/tools/binman/etype/section.py @@ -32,11 +32,19 @@ class Entry_section(Entry): """ def __init__(self, section, etype, node): Entry.__init__(self, section, etype, node) - self._section = bsection.Section(node.name, node) + self._section = bsection.Section(node.name, section, node, + section._image) + + def GetFdtSet(self): + return self._section.GetFdtSet() def ProcessFdt(self, fdt): return self._section.ProcessFdt(fdt) + def ExpandEntries(self): + Entry.ExpandEntries(self) + self._section.ExpandEntries() + def AddMissingProperties(self): Entry.AddMissingProperties(self) self._section.AddMissingProperties() @@ -92,3 +100,7 @@ class Entry_section(Entry): def GetEntries(self): return self._section.GetEntries() + + def ExpandToLimit(self, limit): + super(Entry_section, self).ExpandToLimit(limit) + self._section.ExpandSize(self.size) diff --git a/tools/binman/etype/text.py b/tools/binman/etype/text.py index 7a1cddf4af..6e99819487 100644 --- a/tools/binman/etype/text.py +++ b/tools/binman/etype/text.py @@ -51,6 +51,9 @@ class Entry_text(Entry): self.text_label, = self.GetEntryArgsOrProps( [EntryArg('text-label', str)]) self.value, = self.GetEntryArgsOrProps([EntryArg(self.text_label, str)]) + if not self.value: + self.Raise("No value provided for text label '%s'" % + self.text_label) def ObtainContents(self): self.SetContents(self.value) diff --git a/tools/binman/etype/u_boot_dtb.py b/tools/binman/etype/u_boot_dtb.py index fb3dd1cf64..6263c4ebee 100644 --- a/tools/binman/etype/u_boot_dtb.py +++ b/tools/binman/etype/u_boot_dtb.py @@ -6,9 +6,9 @@ # from entry import Entry -from blob import Entry_blob +from blob_dtb import Entry_blob_dtb -class Entry_u_boot_dtb(Entry_blob): +class Entry_u_boot_dtb(Entry_blob_dtb): """U-Boot device tree Properties / Entry arguments: @@ -17,9 +17,12 @@ class Entry_u_boot_dtb(Entry_blob): This is the U-Boot device tree, containing configuration information for U-Boot. U-Boot needs this to know what devices are present and which drivers to activate. + + Note: This is mostly an internal entry type, used by others. This allows + binman to know which entries contain a device tree. """ def __init__(self, section, etype, node): - Entry_blob.__init__(self, section, etype, node) + Entry_blob_dtb.__init__(self, section, etype, node) def GetDefaultFilename(self): return 'u-boot.dtb' diff --git a/tools/binman/etype/u_boot_dtb_with_ucode.py b/tools/binman/etype/u_boot_dtb_with_ucode.py index 285a28dd1e..444c51b8b7 100644 --- a/tools/binman/etype/u_boot_dtb_with_ucode.py +++ b/tools/binman/etype/u_boot_dtb_with_ucode.py @@ -5,12 +5,12 @@ # Entry-type module for U-Boot device tree with the microcode removed # -import control from entry import Entry -from blob import Entry_blob +from blob_dtb import Entry_blob_dtb +import state import tools -class Entry_u_boot_dtb_with_ucode(Entry_blob): +class Entry_u_boot_dtb_with_ucode(Entry_blob_dtb): """A U-Boot device tree file, with the microcode removed Properties / Entry arguments: @@ -25,7 +25,7 @@ class Entry_u_boot_dtb_with_ucode(Entry_blob): it available to u_boot_ucode. """ def __init__(self, section, etype, node): - Entry_blob.__init__(self, section, etype, node) + Entry_blob_dtb.__init__(self, section, etype, node) self.ucode_data = '' self.collate = False self.ucode_offset = None @@ -45,13 +45,16 @@ class Entry_u_boot_dtb_with_ucode(Entry_blob): 'u-boot-spl-with-ucode-ptr') if not ucode_dest_entry or not ucode_dest_entry.target_offset: ucode_dest_entry = self.section.FindEntryType( + 'u-boot-tpl-with-ucode-ptr') + if not ucode_dest_entry or not ucode_dest_entry.target_offset: + ucode_dest_entry = self.section.FindEntryType( 'u-boot-with-ucode-ptr') if not ucode_dest_entry or not ucode_dest_entry.target_offset: return True # Remove the microcode fname = self.GetDefaultFilename() - fdt = control.GetFdt(fname) + fdt = state.GetFdt(fname) self.ucode = fdt.GetNode('/microcode') if not self.ucode: raise self.Raise("No /microcode node found in '%s'" % fname) @@ -69,15 +72,15 @@ class Entry_u_boot_dtb_with_ucode(Entry_blob): def ObtainContents(self): # Call the base class just in case it does something important. - Entry_blob.ObtainContents(self) - self._pathname = control.GetFdtPath(self._filename) - self.ReadBlobContents() - if self.ucode: + Entry_blob_dtb.ObtainContents(self) + if self.ucode and not self.collate: for node in self.ucode.subnodes: data_prop = node.props.get('data') - if data_prop and not self.collate: + if data_prop: # Find the offset in the device tree of the ucode data self.ucode_offset = data_prop.GetOffset() + 12 self.ucode_size = len(data_prop.bytes) - self.ready = True - return True + self.ready = True + else: + self.ready = True + return self.ready diff --git a/tools/binman/etype/u_boot_elf.py b/tools/binman/etype/u_boot_elf.py new file mode 100644 index 0000000000..134b6cc15b --- /dev/null +++ b/tools/binman/etype/u_boot_elf.py @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2018 Google, Inc +# Written by Simon Glass <sjg@chromium.org> +# +# Entry-type module for U-Boot ELF image +# + +from entry import Entry +from blob import Entry_blob + +import fdt_util +import tools + +class Entry_u_boot_elf(Entry_blob): + """U-Boot ELF image + + Properties / Entry arguments: + - filename: Filename of u-boot (default 'u-boot') + + This is the U-Boot ELF image. It does not include a device tree but can be + relocated to any address for execution. + """ + def __init__(self, section, etype, node): + Entry_blob.__init__(self, section, etype, node) + self._strip = fdt_util.GetBool(self._node, 'strip') + + def ReadBlobContents(self): + if self._strip: + uniq = self.GetUniqueName() + out_fname = tools.GetOutputFilename('%s.stripped' % uniq) + tools.WriteFile(out_fname, tools.ReadFile(self._pathname)) + tools.Run('strip', out_fname) + self.SetContents(tools.ReadFile(out_fname)) + else: + self.SetContents(tools.ReadFile(self._pathname)) + return True + + def GetDefaultFilename(self): + return 'u-boot' diff --git a/tools/binman/etype/u_boot_spl_dtb.py b/tools/binman/etype/u_boot_spl_dtb.py index cb29ba3fd8..e7354646f1 100644 --- a/tools/binman/etype/u_boot_spl_dtb.py +++ b/tools/binman/etype/u_boot_spl_dtb.py @@ -6,9 +6,9 @@ # from entry import Entry -from blob import Entry_blob +from blob_dtb import Entry_blob_dtb -class Entry_u_boot_spl_dtb(Entry_blob): +class Entry_u_boot_spl_dtb(Entry_blob_dtb): """U-Boot SPL device tree Properties / Entry arguments: @@ -19,7 +19,7 @@ class Entry_u_boot_spl_dtb(Entry_blob): to activate. """ def __init__(self, section, etype, node): - Entry_blob.__init__(self, section, etype, node) + Entry_blob_dtb.__init__(self, section, etype, node) def GetDefaultFilename(self): return 'spl/u-boot-spl.dtb' diff --git a/tools/binman/etype/u_boot_spl_elf.py b/tools/binman/etype/u_boot_spl_elf.py new file mode 100644 index 0000000000..da328ae15e --- /dev/null +++ b/tools/binman/etype/u_boot_spl_elf.py @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2018 Google, Inc +# Written by Simon Glass <sjg@chromium.org> +# +# Entry-type module for U-Boot SPL ELF image +# + +from entry import Entry +from blob import Entry_blob + +class Entry_u_boot_spl_elf(Entry_blob): + """U-Boot SPL ELF image + + Properties / Entry arguments: + - filename: Filename of SPL u-boot (default 'spl/u-boot') + + This is the U-Boot SPL ELF image. It does not include a device tree but can + be relocated to any address for execution. + """ + def __init__(self, section, etype, node): + Entry_blob.__init__(self, section, etype, node) + + def GetDefaultFilename(self): + return 'spl/u-boot-spl' diff --git a/tools/binman/etype/u_boot_spl_with_ucode_ptr.py b/tools/binman/etype/u_boot_spl_with_ucode_ptr.py index 0dfe268a56..b650cf0146 100644 --- a/tools/binman/etype/u_boot_spl_with_ucode_ptr.py +++ b/tools/binman/etype/u_boot_spl_with_ucode_ptr.py @@ -16,6 +16,8 @@ import tools class Entry_u_boot_spl_with_ucode_ptr(Entry_u_boot_with_ucode_ptr): """U-Boot SPL with embedded microcode pointer + This is used when SPL must set up the microcode for U-Boot. + See Entry_u_boot_ucode for full details of the entries involved in this process. """ diff --git a/tools/binman/etype/u_boot_tpl_dtb.py b/tools/binman/etype/u_boot_tpl_dtb.py index 9c4e668347..bdeb0f75a2 100644 --- a/tools/binman/etype/u_boot_tpl_dtb.py +++ b/tools/binman/etype/u_boot_tpl_dtb.py @@ -6,9 +6,9 @@ # from entry import Entry -from blob import Entry_blob +from blob_dtb import Entry_blob_dtb -class Entry_u_boot_tpl_dtb(Entry_blob): +class Entry_u_boot_tpl_dtb(Entry_blob_dtb): """U-Boot TPL device tree Properties / Entry arguments: @@ -19,7 +19,7 @@ class Entry_u_boot_tpl_dtb(Entry_blob): to activate. """ def __init__(self, section, etype, node): - Entry_blob.__init__(self, section, etype, node) + Entry_blob_dtb.__init__(self, section, etype, node) def GetDefaultFilename(self): return 'tpl/u-boot-tpl.dtb' diff --git a/tools/binman/etype/u_boot_tpl_dtb_with_ucode.py b/tools/binman/etype/u_boot_tpl_dtb_with_ucode.py new file mode 100644 index 0000000000..71e04fcd44 --- /dev/null +++ b/tools/binman/etype/u_boot_tpl_dtb_with_ucode.py @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2016 Google, Inc +# Written by Simon Glass <sjg@chromium.org> +# +# Entry-type module for U-Boot device tree with the microcode removed +# + +import control +from entry import Entry +from u_boot_dtb_with_ucode import Entry_u_boot_dtb_with_ucode +import tools + +class Entry_u_boot_tpl_dtb_with_ucode(Entry_u_boot_dtb_with_ucode): + """U-Boot TPL with embedded microcode pointer + + This is used when TPL must set up the microcode for U-Boot. + + See Entry_u_boot_ucode for full details of the entries involved in this + process. + """ + def __init__(self, section, etype, node): + Entry_u_boot_dtb_with_ucode.__init__(self, section, etype, node) + + def GetDefaultFilename(self): + return 'tpl/u-boot-tpl.dtb' diff --git a/tools/binman/etype/u_boot_tpl_with_ucode_ptr.py b/tools/binman/etype/u_boot_tpl_with_ucode_ptr.py new file mode 100644 index 0000000000..8d94dded69 --- /dev/null +++ b/tools/binman/etype/u_boot_tpl_with_ucode_ptr.py @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2016 Google, Inc +# Written by Simon Glass <sjg@chromium.org> +# +# Entry-type module for an TPL binary with an embedded microcode pointer +# + +import struct + +import command +from entry import Entry +from blob import Entry_blob +from u_boot_with_ucode_ptr import Entry_u_boot_with_ucode_ptr +import tools + +class Entry_u_boot_tpl_with_ucode_ptr(Entry_u_boot_with_ucode_ptr): + """U-Boot TPL with embedded microcode pointer + + See Entry_u_boot_ucode for full details of the entries involved in this + process. + """ + def __init__(self, section, etype, node): + Entry_u_boot_with_ucode_ptr.__init__(self, section, etype, node) + self.elf_fname = 'tpl/u-boot-tpl' + + def GetDefaultFilename(self): + return 'tpl/u-boot-tpl-nodtb.bin' diff --git a/tools/binman/etype/u_boot_ucode.py b/tools/binman/etype/u_boot_ucode.py index 6acf94d8cb..a00e530295 100644 --- a/tools/binman/etype/u_boot_ucode.py +++ b/tools/binman/etype/u_boot_ucode.py @@ -62,19 +62,24 @@ class Entry_u_boot_ucode(Entry_blob): def ObtainContents(self): # If the section does not need microcode, there is nothing to do - ucode_dest_entry = self.section.FindEntryType('u-boot-with-ucode-ptr') - ucode_dest_entry_spl = self.section.FindEntryType( - 'u-boot-spl-with-ucode-ptr') - if ((not ucode_dest_entry or not ucode_dest_entry.target_offset) and - (not ucode_dest_entry_spl or not ucode_dest_entry_spl.target_offset)): + found = False + for suffix in ['', '-spl', '-tpl']: + name = 'u-boot%s-with-ucode-ptr' % suffix + entry = self.section.FindEntryType(name) + if entry and entry.target_offset: + found = True + if not found: self.data = '' return True - # Get the microcode from the device tree entry. If it is not available # yet, return False so we will be called later. If the section simply # doesn't exist, then we may as well return True, since we are going to # get an error anyway. - fdt_entry = self.section.FindEntryType('u-boot-dtb-with-ucode') + for suffix in ['', '-spl', '-tpl']: + name = 'u-boot%s-dtb-with-ucode' % suffix + fdt_entry = self.section.FindEntryType(name) + if fdt_entry: + break if not fdt_entry: return True if not fdt_entry.ready: @@ -86,12 +91,9 @@ class Entry_u_boot_ucode(Entry_blob): return True # Write it out to a file - dtb_name = 'u-boot-ucode.bin' - fname = tools.GetOutputFilename(dtb_name) - with open(fname, 'wb') as fd: - fd.write(fdt_entry.ucode_data) + self._pathname = tools.GetOutputFilename('u-boot-ucode.bin') + tools.WriteFile(self._pathname, fdt_entry.ucode_data) - self._pathname = fname self.ReadBlobContents() return True diff --git a/tools/binman/etype/u_boot_with_ucode_ptr.py b/tools/binman/etype/u_boot_with_ucode_ptr.py index 51e7ba48f5..da0e12417b 100644 --- a/tools/binman/etype/u_boot_with_ucode_ptr.py +++ b/tools/binman/etype/u_boot_with_ucode_ptr.py @@ -19,6 +19,9 @@ class Entry_u_boot_with_ucode_ptr(Entry_blob): Properties / Entry arguments: - filename: Filename of u-boot-nodtb.dtb (default 'u-boot-nodtb.dtb') + - optional-ucode: boolean property to make microcode optional. If the + u-boot.bin image does not include microcode, no error will + be generated. See Entry_u_boot_ucode for full details of the three entries involved in this process. This entry updates U-Boot with the offset and size of the @@ -63,28 +66,31 @@ class Entry_u_boot_with_ucode_ptr(Entry_blob): # the U-Boot region must start at offset 7MB in the section. In this # case the ROM starts at 0xff800000, so the offset of the first # entry in the section corresponds to that. - if (self.target_offset < self.offset or - self.target_offset >= self.offset + self.size): - self.Raise('Microcode pointer _dt_ucode_base_size at %08x is ' - 'outside the section ranging from %08x to %08x' % - (self.target_offset, self.offset, self.offset + self.size)) + if (self.target_offset < self.image_pos or + self.target_offset >= self.image_pos + self.size): + self.Raise('Microcode pointer _dt_ucode_base_size at %08x is outside the section ranging from %08x to %08x' % + (self.target_offset, self.image_pos, + self.image_pos + self.size)) # Get the microcode, either from u-boot-ucode or u-boot-dtb-with-ucode. # If we have left the microcode in the device tree, then it will be - # in the former. If we extracted the microcode from the device tree - # and collated it in one place, it will be in the latter. + # in the latter. If we extracted the microcode from the device tree + # and collated it in one place, it will be in the former. if ucode_entry.size: offset, size = ucode_entry.offset, ucode_entry.size else: dtb_entry = self.section.FindEntryType('u-boot-dtb-with-ucode') - if not dtb_entry or not dtb_entry.ready: + if not dtb_entry: + dtb_entry = self.section.FindEntryType( + 'u-boot-tpl-dtb-with-ucode') + if not dtb_entry: self.Raise('Cannot find microcode region u-boot-dtb-with-ucode') offset = dtb_entry.offset + dtb_entry.ucode_offset size = dtb_entry.ucode_size # Write the microcode offset and size into the entry offset_and_size = struct.pack('<2L', offset, size) - self.target_offset -= self.offset + self.target_offset -= self.image_pos self.ProcessContentsUpdate(self.data[:self.target_offset] + offset_and_size + self.data[self.target_offset + 8:]) diff --git a/tools/binman/etype/vblock.py b/tools/binman/etype/vblock.py index 595af5456d..c4d970ed16 100644 --- a/tools/binman/etype/vblock.py +++ b/tools/binman/etype/vblock.py @@ -25,6 +25,11 @@ class Entry_vblock(Entry): - kernelkey: Name of the kernel key to use (inside keydir) - preamble-flags: Value of the vboot preamble flags (typically 0) + Output files: + - input.<unique_name> - input file passed to futility + - vblock.<unique_name> - output file generated by futility (which is + used as the entry contents) + Chromium OS signs the read-write firmware and kernel, writing the signature in this block. This allows U-Boot to verify that the next firmware stage and kernel are genuine. @@ -53,8 +58,9 @@ class Entry_vblock(Entry): return False input_data += data - output_fname = tools.GetOutputFilename('vblock.%s' % self.name) - input_fname = tools.GetOutputFilename('input.%s' % self.name) + uniq = self.GetUniqueName() + output_fname = tools.GetOutputFilename('vblock.%s' % uniq) + input_fname = tools.GetOutputFilename('input.%s' % uniq) tools.WriteFile(input_fname, input_data) prefix = self.keydir + '/' args = [ @@ -69,6 +75,5 @@ class Entry_vblock(Entry): ] #out.Notice("Sign '%s' into %s" % (', '.join(self.value), self.label)) stdout = tools.Run('futility', *args) - #out.Debug(stdout) self.SetContents(tools.ReadFile(output_fname)) return True diff --git a/tools/binman/etype/x86_start16_tpl.py b/tools/binman/etype/x86_start16_tpl.py new file mode 100644 index 0000000000..46ce169ae0 --- /dev/null +++ b/tools/binman/etype/x86_start16_tpl.py @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2018 Google, Inc +# Written by Simon Glass <sjg@chromium.org> +# +# Entry-type module for the 16-bit x86 start-up code for U-Boot TPL +# + +from entry import Entry +from blob import Entry_blob + +class Entry_x86_start16_tpl(Entry_blob): + """x86 16-bit start-up code for TPL + + Properties / Entry arguments: + - filename: Filename of tpl/u-boot-x86-16bit-tpl.bin (default + 'tpl/u-boot-x86-16bit-tpl.bin') + + x86 CPUs start up in 16-bit mode, even if they are 64-bit CPUs. This code + must be placed at a particular address. This entry holds that code. It is + typically placed at offset CONFIG_SYS_X86_START16. The code is responsible + for changing to 32-bit mode and starting TPL, which in turn jumps to SPL. + + If TPL is not being used, the 'x86_start16_spl or 'x86_start16' entry types + may be used instead. + """ + def __init__(self, section, etype, node): + Entry_blob.__init__(self, section, etype, node) + + def GetDefaultFilename(self): + return 'tpl/u-boot-x86-16bit-tpl.bin' diff --git a/tools/binman/fmap_util.py b/tools/binman/fmap_util.py index 7d520e3391..be3cbee87b 100644 --- a/tools/binman/fmap_util.py +++ b/tools/binman/fmap_util.py @@ -49,6 +49,9 @@ FmapHeader = collections.namedtuple('FmapHeader', FMAP_HEADER_NAMES) FmapArea = collections.namedtuple('FmapArea', FMAP_AREA_NAMES) +def NameToFmap(name): + return name.replace('\0', '').replace('-', '_').upper() + def ConvertName(field_names, fields): """Convert a name to something flashrom likes @@ -62,7 +65,7 @@ def ConvertName(field_names, fields): value: value of that field (string for the ones we support) """ name_index = field_names.index('name') - fields[name_index] = fields[name_index].replace('\0', '').replace('-', '_').upper() + fields[name_index] = NameToFmap(fields[name_index]) def DecodeFmap(data): """Decode a flashmap into a header and list of areas @@ -100,6 +103,7 @@ def EncodeFmap(image_size, name, areas): """ def _FormatBlob(fmt, names, obj): params = [getattr(obj, name) for name in names] + ConvertName(names, params) return struct.pack(fmt, *params) values = FmapHeader(FMAP_SIGNATURE, 1, 0, 0, image_size, name, len(areas)) diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index a8456c2615..57725c928e 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -6,6 +6,7 @@ # # python -m unittest func_test.TestFunctional.testHelp +import hashlib from optparse import OptionParser import os import shutil @@ -23,6 +24,7 @@ import fdt import fdt_util import fmap_util import test_util +import state import tools import tout @@ -39,8 +41,11 @@ U_BOOT_SPL_DTB_DATA = 'spldtb' U_BOOT_TPL_DTB_DATA = 'tpldtb' X86_START16_DATA = 'start16' X86_START16_SPL_DATA = 'start16spl' +X86_START16_TPL_DATA = 'start16tpl' +PPC_MPC85XX_BR_DATA = 'ppcmpc85xxbr' U_BOOT_NODTB_DATA = 'nodtb with microcode pointer somewhere in here' U_BOOT_SPL_NODTB_DATA = 'splnodtb with microcode pointer somewhere in here' +U_BOOT_TPL_NODTB_DATA = 'tplnodtb with microcode pointer somewhere in here' FSP_DATA = 'fsp' CMC_DATA = 'cmc' VBT_DATA = 'vbt' @@ -52,6 +57,9 @@ CROS_EC_RW_DATA = 'ecrw' GBB_DATA = 'gbbd' BMPBLK_DATA = 'bmp' VBLOCK_DATA = 'vblk' +FILES_DATA = ("sorry I'm late\nOh, don't bother apologising, I'm " + + "sorry you're alive\n") +COMPRESS_DATA = 'data to compress' class TestFunctional(unittest.TestCase): @@ -90,11 +98,16 @@ class TestFunctional(unittest.TestCase): TestFunctional._MakeInputFile('vga.bin', VGA_DATA) self._ResetDtbs() TestFunctional._MakeInputFile('u-boot-x86-16bit.bin', X86_START16_DATA) + TestFunctional._MakeInputFile('u-boot-br.bin', PPC_MPC85XX_BR_DATA) TestFunctional._MakeInputFile('spl/u-boot-x86-16bit-spl.bin', X86_START16_SPL_DATA) + TestFunctional._MakeInputFile('tpl/u-boot-x86-16bit-tpl.bin', + X86_START16_TPL_DATA) TestFunctional._MakeInputFile('u-boot-nodtb.bin', U_BOOT_NODTB_DATA) TestFunctional._MakeInputFile('spl/u-boot-spl-nodtb.bin', U_BOOT_SPL_NODTB_DATA) + TestFunctional._MakeInputFile('tpl/u-boot-tpl-nodtb.bin', + U_BOOT_TPL_NODTB_DATA) TestFunctional._MakeInputFile('fsp.bin', FSP_DATA) TestFunctional._MakeInputFile('cmc.bin', CMC_DATA) TestFunctional._MakeInputFile('vbt.bin', VBT_DATA) @@ -112,6 +125,11 @@ class TestFunctional(unittest.TestCase): with open(self.TestFile('descriptor.bin')) as fd: TestFunctional._MakeInputFile('descriptor.bin', fd.read()) + shutil.copytree(self.TestFile('files'), + os.path.join(self._indir, 'files')) + + TestFunctional._MakeInputFile('compress', COMPRESS_DATA) + @classmethod def tearDownClass(self): """Remove the temporary input directory and its contents""" @@ -168,7 +186,7 @@ class TestFunctional(unittest.TestCase): return control.Binman(options, args) def _DoTestFile(self, fname, debug=False, map=False, update_dtb=False, - entry_args=None): + entry_args=None, images=None, use_real_dtb=False): """Run binman with a given test file Args: @@ -177,6 +195,10 @@ class TestFunctional(unittest.TestCase): map: True to output map files for the images update_dtb: Update the offset and size of each entry in the device tree before packing it into the image + entry_args: Dict of entry args to supply to binman + key: arg name + value: value of that arg + images: List of image names to build """ args = ['-p', '-I', self._indir, '-d', self.TestFile(fname)] if debug: @@ -185,9 +207,14 @@ class TestFunctional(unittest.TestCase): args.append('-m') if update_dtb: args.append('-up') + if not use_real_dtb: + args.append('--fake-dtb') if entry_args: for arg, value in entry_args.iteritems(): args.append('-a%s=%s' % (arg, value)) + if images: + for image in images: + args += ['-i', image] return self._DoBinman(*args) def _SetupDtb(self, fname, outfile='u-boot.dtb'): @@ -212,8 +239,26 @@ class TestFunctional(unittest.TestCase): TestFunctional._MakeInputFile(outfile, data) return data + def _GetDtbContentsForSplTpl(self, dtb_data, name): + """Create a version of the main DTB for SPL or SPL + + For testing we don't actually have different versions of the DTB. With + U-Boot we normally run fdtgrep to remove unwanted nodes, but for tests + we don't normally have any unwanted nodes. + + We still want the DTBs for SPL and TPL to be different though, since + otherwise it is confusing to know which one we are looking at. So add + an 'spl' or 'tpl' property to the top-level node. + """ + dtb = fdt.Fdt.FromData(dtb_data) + dtb.Scan() + dtb.GetNode('/binman').AddZeroProp(name) + dtb.Sync(auto_resize=True) + dtb.Pack() + return dtb.GetContents() + def _DoReadFileDtb(self, fname, use_real_dtb=False, map=False, - update_dtb=False, entry_args=None): + update_dtb=False, entry_args=None, reset_dtbs=True): """Run binman and return the resulting image This runs binman with a given test file and then reads the resulting @@ -243,12 +288,21 @@ class TestFunctional(unittest.TestCase): # Use the compiled test file as the u-boot-dtb input if use_real_dtb: dtb_data = self._SetupDtb(fname) + infile = os.path.join(self._indir, 'u-boot.dtb') + + # For testing purposes, make a copy of the DT for SPL and TPL. Add + # a node indicating which it is, so aid verification. + for name in ['spl', 'tpl']: + dtb_fname = '%s/u-boot-%s.dtb' % (name, name) + outfile = os.path.join(self._indir, dtb_fname) + TestFunctional._MakeInputFile(dtb_fname, + self._GetDtbContentsForSplTpl(dtb_data, name)) try: retcode = self._DoTestFile(fname, map=map, update_dtb=update_dtb, - entry_args=entry_args) + entry_args=entry_args, use_real_dtb=use_real_dtb) self.assertEqual(0, retcode) - out_dtb_fname = control.GetFdtPath('u-boot.dtb') + out_dtb_fname = tools.GetOutputFilename('u-boot.dtb.out') # Find the (only) image, read it and return its contents image = control.images['image'] @@ -264,7 +318,7 @@ class TestFunctional(unittest.TestCase): return fd.read(), dtb_data, map_data, out_dtb_fname finally: # Put the test file back - if use_real_dtb: + if reset_dtbs and use_real_dtb: self._ResetDtbs() def _DoReadFile(self, fname, use_real_dtb=False): @@ -711,6 +765,14 @@ class TestFunctional(unittest.TestCase): self.assertIn("Section '/binman': Section size must be provided when " "using end-at-4gb", str(e.exception)) + def test4gbAndSkipAtStartTogether(self): + """Test that the end-at-4gb and skip-at-size property can't be used + together""" + with self.assertRaises(ValueError) as e: + self._DoTestFile('80_4gb_and_skip_at_start_together.dts') + self.assertIn("Section '/binman': Provide either 'end-at-4gb' or " + "'skip-at-start'", str(e.exception)) + def testPackX86RomOutside(self): """Test that the end-at-4gb property checks for offset boundaries""" with self.assertRaises(ValueError) as e: @@ -756,6 +818,12 @@ class TestFunctional(unittest.TestCase): data = self._DoReadFile('33_x86-start16.dts') self.assertEqual(X86_START16_DATA, data[:len(X86_START16_DATA)]) + def testPackPowerpcMpc85xxBootpgResetvec(self): + """Test that an image with powerpc-mpc85xx-bootpg-resetvec can be + created""" + data = self._DoReadFile('81_powerpc_mpc85xx_bootpg_resetvec.dts') + self.assertEqual(PPC_MPC85XX_BR_DATA, data[:len(PPC_MPC85XX_BR_DATA)]) + def _RunMicrocodeTest(self, dts_fname, nodtb_data, ucode_second=False): """Handle running a test for insertion of microcode @@ -964,7 +1032,7 @@ class TestFunctional(unittest.TestCase): str(e.exception)) def testPackStart16Spl(self): - """Test that an image with an x86 start16 region can be created""" + """Test that an image with an x86 start16 SPL region can be created""" data = self._DoReadFile('48_x86-start16-spl.dts') self.assertEqual(X86_START16_SPL_DATA, data[:len(X86_START16_SPL_DATA)]) @@ -1313,7 +1381,7 @@ class TestFunctional(unittest.TestCase): """Fake calls to the futility utility""" if pipe_list[0][0] == 'futility': fname = pipe_list[0][3] - with open(fname, 'w') as fd: + with open(fname, 'wb') as fd: fd.write(VBLOCK_DATA) return command.CommandResult() @@ -1364,6 +1432,334 @@ class TestFunctional(unittest.TestCase): self.assertIn("Node '/binman/u-boot': Please use 'offset' instead of " "'pos'", str(e.exception)) + def testFillZero(self): + """Test for an fill entry type with a size of 0""" + data = self._DoReadFile('80_fill_empty.dts') + self.assertEqual(chr(0) * 16, data) + + def testTextMissing(self): + """Test for a text entry type where there is no text""" + with self.assertRaises(ValueError) as e: + self._DoReadFileDtb('66_text.dts',) + self.assertIn("Node '/binman/text': No value provided for text label " + "'test-id'", str(e.exception)) + + def testPackStart16Tpl(self): + """Test that an image with an x86 start16 TPL region can be created""" + data = self._DoReadFile('81_x86-start16-tpl.dts') + self.assertEqual(X86_START16_TPL_DATA, data[:len(X86_START16_TPL_DATA)]) + + def testSelectImage(self): + """Test that we can select which images to build""" + with test_util.capture_sys_output() as (stdout, stderr): + retcode = self._DoTestFile('06_dual_image.dts', images=['image2']) + self.assertEqual(0, retcode) + self.assertIn('Skipping images: image1', stdout.getvalue()) + + self.assertFalse(os.path.exists(tools.GetOutputFilename('image1.bin'))) + self.assertTrue(os.path.exists(tools.GetOutputFilename('image2.bin'))) + + def testUpdateFdtAll(self): + """Test that all device trees are updated with offset/size info""" + data, _, _, _ = self._DoReadFileDtb('82_fdt_update_all.dts', + use_real_dtb=True, update_dtb=True) + + base_expected = { + 'section:image-pos': 0, + 'u-boot-tpl-dtb:size': 513, + 'u-boot-spl-dtb:size': 513, + 'u-boot-spl-dtb:offset': 493, + 'image-pos': 0, + 'section/u-boot-dtb:image-pos': 0, + 'u-boot-spl-dtb:image-pos': 493, + 'section/u-boot-dtb:size': 493, + 'u-boot-tpl-dtb:image-pos': 1006, + 'section/u-boot-dtb:offset': 0, + 'section:size': 493, + 'offset': 0, + 'section:offset': 0, + 'u-boot-tpl-dtb:offset': 1006, + 'size': 1519 + } + + # We expect three device-tree files in the output, one after the other. + # Read them in sequence. We look for an 'spl' property in the SPL tree, + # and 'tpl' in the TPL tree, to make sure they are distinct from the + # main U-Boot tree. All three should have the same postions and offset. + start = 0 + for item in ['', 'spl', 'tpl']: + dtb = fdt.Fdt.FromData(data[start:]) + dtb.Scan() + props = self._GetPropTree(dtb, ['offset', 'size', 'image-pos', + 'spl', 'tpl']) + expected = dict(base_expected) + if item: + expected[item] = 0 + self.assertEqual(expected, props) + start += dtb._fdt_obj.totalsize() + + def testUpdateFdtOutput(self): + """Test that output DTB files are updated""" + try: + data, dtb_data, _, _ = self._DoReadFileDtb('82_fdt_update_all.dts', + use_real_dtb=True, update_dtb=True, reset_dtbs=False) + + # Unfortunately, compiling a source file always results in a file + # called source.dtb (see fdt_util.EnsureCompiled()). The test + # source file (e.g. test/75_fdt_update_all.dts) thus does not enter + # binman as a file called u-boot.dtb. To fix this, copy the file + # over to the expected place. + #tools.WriteFile(os.path.join(self._indir, 'u-boot.dtb'), + #tools.ReadFile(tools.GetOutputFilename('source.dtb'))) + start = 0 + for fname in ['u-boot.dtb.out', 'spl/u-boot-spl.dtb.out', + 'tpl/u-boot-tpl.dtb.out']: + dtb = fdt.Fdt.FromData(data[start:]) + size = dtb._fdt_obj.totalsize() + pathname = tools.GetOutputFilename(os.path.split(fname)[1]) + outdata = tools.ReadFile(pathname) + name = os.path.split(fname)[0] + + if name: + orig_indata = self._GetDtbContentsForSplTpl(dtb_data, name) + else: + orig_indata = dtb_data + self.assertNotEqual(outdata, orig_indata, + "Expected output file '%s' be updated" % pathname) + self.assertEqual(outdata, data[start:start + size], + "Expected output file '%s' to match output image" % + pathname) + start += size + finally: + self._ResetDtbs() + + def _decompress(self, data): + out = os.path.join(self._indir, 'lz4.tmp') + with open(out, 'wb') as fd: + fd.write(data) + return tools.Run('lz4', '-dc', out) + ''' + try: + orig = lz4.frame.decompress(data) + except AttributeError: + orig = lz4.decompress(data) + ''' + + def testCompress(self): + """Test compression of blobs""" + data, _, _, out_dtb_fname = self._DoReadFileDtb('83_compress.dts', + use_real_dtb=True, update_dtb=True) + dtb = fdt.Fdt(out_dtb_fname) + dtb.Scan() + props = self._GetPropTree(dtb, ['size', 'uncomp-size']) + orig = self._decompress(data) + self.assertEquals(COMPRESS_DATA, orig) + expected = { + 'blob:uncomp-size': len(COMPRESS_DATA), + 'blob:size': len(data), + 'size': len(data), + } + self.assertEqual(expected, props) + + def testFiles(self): + """Test bringing in multiple files""" + data = self._DoReadFile('84_files.dts') + self.assertEqual(FILES_DATA, data) + + def testFilesCompress(self): + """Test bringing in multiple files and compressing them""" + data = self._DoReadFile('85_files_compress.dts') + + image = control.images['image'] + entries = image.GetEntries() + files = entries['files'] + entries = files._section._entries + + orig = '' + for i in range(1, 3): + key = '%d.dat' % i + start = entries[key].image_pos + len = entries[key].size + chunk = data[start:start + len] + orig += self._decompress(chunk) + + self.assertEqual(FILES_DATA, orig) + + def testFilesMissing(self): + """Test missing files""" + with self.assertRaises(ValueError) as e: + data = self._DoReadFile('86_files_none.dts') + self.assertIn("Node '/binman/files': Pattern \'files/*.none\' matched " + 'no files', str(e.exception)) + + def testFilesNoPattern(self): + """Test missing files""" + with self.assertRaises(ValueError) as e: + data = self._DoReadFile('87_files_no_pattern.dts') + self.assertIn("Node '/binman/files': Missing 'pattern' property", + str(e.exception)) + + def testExpandSize(self): + """Test an expanding entry""" + data, _, map_data, _ = self._DoReadFileDtb('88_expand_size.dts', + map=True) + expect = ('a' * 8 + U_BOOT_DATA + + MRC_DATA + 'b' * 1 + U_BOOT_DATA + + 'c' * 8 + U_BOOT_DATA + + 'd' * 8) + self.assertEqual(expect, data) + self.assertEqual('''ImagePos Offset Size Name +00000000 00000000 00000028 main-section +00000000 00000000 00000008 fill +00000008 00000008 00000004 u-boot +0000000c 0000000c 00000004 section +0000000c 00000000 00000003 intel-mrc +00000010 00000010 00000004 u-boot2 +00000014 00000014 0000000c section2 +00000014 00000000 00000008 fill +0000001c 00000008 00000004 u-boot +00000020 00000020 00000008 fill2 +''', map_data) + + def testExpandSizeBad(self): + """Test an expanding entry which fails to provide contents""" + with test_util.capture_sys_output() as (stdout, stderr): + with self.assertRaises(ValueError) as e: + self._DoReadFileDtb('89_expand_size_bad.dts', map=True) + self.assertIn("Node '/binman/_testing': Cannot obtain contents when " + 'expanding entry', str(e.exception)) + + def testHash(self): + """Test hashing of the contents of an entry""" + _, _, _, out_dtb_fname = self._DoReadFileDtb('90_hash.dts', + use_real_dtb=True, update_dtb=True) + dtb = fdt.Fdt(out_dtb_fname) + dtb.Scan() + hash_node = dtb.GetNode('/binman/u-boot/hash').props['value'] + m = hashlib.sha256() + m.update(U_BOOT_DATA) + self.assertEqual(m.digest(), ''.join(hash_node.value)) + + def testHashNoAlgo(self): + with self.assertRaises(ValueError) as e: + self._DoReadFileDtb('91_hash_no_algo.dts', update_dtb=True) + self.assertIn("Node \'/binman/u-boot\': Missing \'algo\' property for " + 'hash node', str(e.exception)) + + def testHashBadAlgo(self): + with self.assertRaises(ValueError) as e: + self._DoReadFileDtb('92_hash_bad_algo.dts', update_dtb=True) + self.assertIn("Node '/binman/u-boot': Unknown hash algorithm", + str(e.exception)) + + def testHashSection(self): + """Test hashing of the contents of an entry""" + _, _, _, out_dtb_fname = self._DoReadFileDtb('99_hash_section.dts', + use_real_dtb=True, update_dtb=True) + dtb = fdt.Fdt(out_dtb_fname) + dtb.Scan() + hash_node = dtb.GetNode('/binman/section/hash').props['value'] + m = hashlib.sha256() + m.update(U_BOOT_DATA) + m.update(16 * 'a') + self.assertEqual(m.digest(), ''.join(hash_node.value)) + + def testPackUBootTplMicrocode(self): + """Test that x86 microcode can be handled correctly in TPL + + We expect to see the following in the image, in order: + u-boot-tpl-nodtb.bin with a microcode pointer inserted at the correct + place + u-boot-tpl.dtb with the microcode removed + the microcode + """ + with open(self.TestFile('u_boot_ucode_ptr')) as fd: + TestFunctional._MakeInputFile('tpl/u-boot-tpl', fd.read()) + first, pos_and_size = self._RunMicrocodeTest('93_x86_tpl_ucode.dts', + U_BOOT_TPL_NODTB_DATA) + self.assertEqual('tplnodtb with microc' + pos_and_size + + 'ter somewhere in here', first) + + def testFmapX86(self): + """Basic test of generation of a flashrom fmap""" + data = self._DoReadFile('94_fmap_x86.dts') + fhdr, fentries = fmap_util.DecodeFmap(data[32:]) + expected = U_BOOT_DATA + MRC_DATA + 'a' * (32 - 7) + self.assertEqual(expected, data[:32]) + fhdr, fentries = fmap_util.DecodeFmap(data[32:]) + + self.assertEqual(0x100, fhdr.image_size) + + self.assertEqual(0, fentries[0].offset) + self.assertEqual(4, fentries[0].size) + self.assertEqual('U_BOOT', fentries[0].name) + + self.assertEqual(4, fentries[1].offset) + self.assertEqual(3, fentries[1].size) + self.assertEqual('INTEL_MRC', fentries[1].name) + + self.assertEqual(32, fentries[2].offset) + self.assertEqual(fmap_util.FMAP_HEADER_LEN + + fmap_util.FMAP_AREA_LEN * 3, fentries[2].size) + self.assertEqual('FMAP', fentries[2].name) + + def testFmapX86Section(self): + """Basic test of generation of a flashrom fmap""" + data = self._DoReadFile('95_fmap_x86_section.dts') + expected = U_BOOT_DATA + MRC_DATA + 'b' * (32 - 7) + self.assertEqual(expected, data[:32]) + fhdr, fentries = fmap_util.DecodeFmap(data[36:]) + + self.assertEqual(0x100, fhdr.image_size) + + self.assertEqual(0, fentries[0].offset) + self.assertEqual(4, fentries[0].size) + self.assertEqual('U_BOOT', fentries[0].name) + + self.assertEqual(4, fentries[1].offset) + self.assertEqual(3, fentries[1].size) + self.assertEqual('INTEL_MRC', fentries[1].name) + + self.assertEqual(36, fentries[2].offset) + self.assertEqual(fmap_util.FMAP_HEADER_LEN + + fmap_util.FMAP_AREA_LEN * 3, fentries[2].size) + self.assertEqual('FMAP', fentries[2].name) + + def testElf(self): + """Basic test of ELF entries""" + with open(self.TestFile('bss_data')) as fd: + TestFunctional._MakeInputFile('spl/u-boot-spl', fd.read()) + with open(self.TestFile('bss_data')) as fd: + TestFunctional._MakeInputFile('-boot', fd.read()) + data = self._DoReadFile('96_elf.dts') + + def testElfStripg(self): + """Basic test of ELF entries""" + with open(self.TestFile('bss_data')) as fd: + TestFunctional._MakeInputFile('spl/u-boot-spl', fd.read()) + with open(self.TestFile('bss_data')) as fd: + TestFunctional._MakeInputFile('-boot', fd.read()) + data = self._DoReadFile('97_elf_strip.dts') + + def testPackOverlapMap(self): + """Test that overlapping regions are detected""" + with test_util.capture_sys_output() as (stdout, stderr): + with self.assertRaises(ValueError) as e: + self._DoTestFile('14_pack_overlap.dts', map=True) + map_fname = tools.GetOutputFilename('image.map') + self.assertEqual("Wrote map file '%s' to show errors\n" % map_fname, + stdout.getvalue()) + + # We should not get an inmage, but there should be a map file + self.assertFalse(os.path.exists(tools.GetOutputFilename('image.bin'))) + self.assertTrue(os.path.exists(map_fname)) + map_data = tools.ReadFile(map_fname) + self.assertEqual('''ImagePos Offset Size Name +<none> 00000000 00000007 main-section +<none> 00000000 00000004 u-boot +<none> 00000003 00000004 u-boot-align +''', map_data) + if __name__ == "__main__": unittest.main() diff --git a/tools/binman/image.py b/tools/binman/image.py index 68126bc3e6..f237ae302d 100644 --- a/tools/binman/image.py +++ b/tools/binman/image.py @@ -42,7 +42,8 @@ class Image: self._size = None self._filename = '%s.bin' % self._name if test: - self._section = bsection.Section('main-section', self._node, True) + self._section = bsection.Section('main-section', None, self._node, + self, True) else: self._ReadNode() @@ -52,7 +53,20 @@ class Image: filename = fdt_util.GetString(self._node, 'filename') if filename: self._filename = filename - self._section = bsection.Section('main-section', self._node) + self._section = bsection.Section('main-section', None, self._node, self) + + def GetFdtSet(self): + """Get the set of device tree files used by this image""" + return self._section.GetFdtSet() + + def ExpandEntries(self): + """Expand out any entries which have calculated sub-entries + + Some entries are expanded out at runtime, e.g. 'files', which produces + a section containing a list of files. Process these entries so that + this information is added to the device tree. + """ + self._section.ExpandEntries() def AddMissingProperties(self): """Add properties that are not present in the device tree @@ -66,6 +80,11 @@ class Image: self._section.AddMissingProperties() def ProcessFdt(self, fdt): + """Allow entries to adjust the device tree + + Some entries need to adjust the device tree for their purposes. This + may involve adding or deleting properties. + """ return self._section.ProcessFdt(fdt) def GetEntryContents(self): @@ -120,10 +139,15 @@ class Image: return self._section.GetEntries() def WriteMap(self): - """Write a map of the image to a .map file""" + """Write a map of the image to a .map file + + Returns: + Filename of map file written + """ filename = '%s.map' % self._name fname = tools.GetOutputFilename(filename) with open(fname, 'w') as fd: print('%8s %8s %8s %s' % ('ImagePos', 'Offset', 'Size', 'Name'), file=fd) self._section.WriteMap(fd, 0) + return fname diff --git a/tools/binman/state.py b/tools/binman/state.py new file mode 100644 index 0000000000..d945e4bf65 --- /dev/null +++ b/tools/binman/state.py @@ -0,0 +1,253 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2018 Google, Inc +# Written by Simon Glass <sjg@chromium.org> +# +# Holds and modifies the state information held by binman +# + +import hashlib +import re +from sets import Set + +import os +import tools + +# Records the device-tree files known to binman, keyed by filename (e.g. +# 'u-boot-spl.dtb') +fdt_files = {} + +# Arguments passed to binman to provide arguments to entries +entry_args = {} + +# True to use fake device-tree files for testing (see U_BOOT_DTB_DATA in +# ftest.py) +use_fake_dtb = False + +# Set of all device tree files references by images +fdt_set = Set() + +# Same as above, but excluding the main one +fdt_subset = Set() + +# The DTB which contains the full image information +main_dtb = None + +def GetFdt(fname): + """Get the Fdt object for a particular device-tree filename + + Binman keeps track of at least one device-tree file called u-boot.dtb but + can also have others (e.g. for SPL). This function looks up the given + filename and returns the associated Fdt object. + + Args: + fname: Filename to look up (e.g. 'u-boot.dtb'). + + Returns: + Fdt object associated with the filename + """ + return fdt_files[fname] + +def GetFdtPath(fname): + """Get the full pathname of a particular Fdt object + + Similar to GetFdt() but returns the pathname associated with the Fdt. + + Args: + fname: Filename to look up (e.g. 'u-boot.dtb'). + + Returns: + Full path name to the associated Fdt + """ + return fdt_files[fname]._fname + +def GetFdtContents(fname): + """Looks up the FDT pathname and contents + + This is used to obtain the Fdt pathname and contents when needed by an + entry. It supports a 'fake' dtb, allowing tests to substitute test data for + the real dtb. + + Args: + fname: Filename to look up (e.g. 'u-boot.dtb'). + + Returns: + tuple: + pathname to Fdt + Fdt data (as bytes) + """ + if fname in fdt_files and not use_fake_dtb: + pathname = GetFdtPath(fname) + data = GetFdt(fname).GetContents() + else: + pathname = tools.GetInputFilename(fname) + data = tools.ReadFile(pathname) + return pathname, data + +def SetEntryArgs(args): + """Set the value of the entry args + + This sets up the entry_args dict which is used to supply entry arguments to + entries. + + Args: + args: List of entry arguments, each in the format "name=value" + """ + global entry_args + + entry_args = {} + if args: + for arg in args: + m = re.match('([^=]*)=(.*)', arg) + if not m: + raise ValueError("Invalid entry arguemnt '%s'" % arg) + entry_args[m.group(1)] = m.group(2) + +def GetEntryArg(name): + """Get the value of an entry argument + + Args: + name: Name of argument to retrieve + + Returns: + String value of argument + """ + return entry_args.get(name) + +def Prepare(images, dtb): + """Get device tree files ready for use + + This sets up a set of device tree files that can be retrieved by GetFdts(). + At present there is only one, that for U-Boot proper. + + Args: + images: List of images being used + dtb: Main dtb + """ + global fdt_set, fdt_subset, fdt_files, main_dtb + # Import these here in case libfdt.py is not available, in which case + # the above help option still works. + import fdt + import fdt_util + + # If we are updating the DTBs we need to put these updated versions + # where Entry_blob_dtb can find them. We can ignore 'u-boot.dtb' + # since it is assumed to be the one passed in with options.dt, and + # was handled just above. + main_dtb = dtb + fdt_files.clear() + fdt_files['u-boot.dtb'] = dtb + fdt_subset = Set() + if not use_fake_dtb: + for image in images.values(): + fdt_subset.update(image.GetFdtSet()) + fdt_subset.discard('u-boot.dtb') + for other_fname in fdt_subset: + infile = tools.GetInputFilename(other_fname) + other_fname_dtb = fdt_util.EnsureCompiled(infile) + out_fname = tools.GetOutputFilename('%s.out' % + os.path.split(other_fname)[1]) + tools.WriteFile(out_fname, tools.ReadFile(other_fname_dtb)) + other_dtb = fdt.FdtScan(out_fname) + fdt_files[other_fname] = other_dtb + +def GetFdts(): + """Yield all device tree files being used by binman + + Yields: + Device trees being used (U-Boot proper, SPL, TPL) + """ + yield main_dtb + for other_fname in fdt_subset: + yield fdt_files[other_fname] + +def GetUpdateNodes(node): + """Yield all the nodes that need to be updated in all device trees + + The property referenced by this node is added to any device trees which + have the given node. Due to removable of unwanted notes, SPL and TPL may + not have this node. + + Args: + node: Node object in the main device tree to look up + + Yields: + Node objects in each device tree that is in use (U-Boot proper, which + is node, SPL and TPL) + """ + yield node + for dtb in fdt_files.values(): + if dtb != node.GetFdt(): + other_node = dtb.GetNode(node.path) + if other_node: + yield other_node + +def AddZeroProp(node, prop): + """Add a new property to affected device trees with an integer value of 0. + + Args: + prop_name: Name of property + """ + for n in GetUpdateNodes(node): + n.AddZeroProp(prop) + +def AddSubnode(node, name): + """Add a new subnode to a node in affected device trees + + Args: + node: Node to add to + name: name of node to add + + Returns: + New subnode that was created in main tree + """ + first = None + for n in GetUpdateNodes(node): + subnode = n.AddSubnode(name) + if not first: + first = subnode + return first + +def AddString(node, prop, value): + """Add a new string property to affected device trees + + Args: + prop_name: Name of property + value: String value (which will be \0-terminated in the DT) + """ + for n in GetUpdateNodes(node): + n.AddString(prop, value) + +def SetInt(node, prop, value): + """Update an integer property in affected device trees with an integer value + + This is not allowed to change the size of the FDT. + + Args: + prop_name: Name of property + """ + for n in GetUpdateNodes(node): + n.SetInt(prop, value) + +def CheckAddHashProp(node): + hash_node = node.FindNode('hash') + if hash_node: + algo = hash_node.props.get('algo') + if not algo: + return "Missing 'algo' property for hash node" + if algo.value == 'sha256': + size = 32 + else: + return "Unknown hash algorithm '%s'" % algo + for n in GetUpdateNodes(hash_node): + n.AddEmptyProp('value', size) + +def CheckSetHashValue(node, get_data_func): + hash_node = node.FindNode('hash') + if hash_node: + algo = hash_node.props.get('algo').value + if algo == 'sha256': + m = hashlib.sha256() + m.update(get_data_func()) + data = m.digest() + for n in GetUpdateNodes(hash_node): + n.SetData('value', data) diff --git a/tools/binman/test/80_4gb_and_skip_at_start_together.dts b/tools/binman/test/80_4gb_and_skip_at_start_together.dts new file mode 100644 index 0000000000..90c467d910 --- /dev/null +++ b/tools/binman/test/80_4gb_and_skip_at_start_together.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + size = <32>; + sort-by-offset; + end-at-4gb; + skip-at-start = <0xffffffe0>; + u-boot { + offset = <0xffffffe0>; + }; + }; +}; diff --git a/tools/binman/test/80_fill_empty.dts b/tools/binman/test/80_fill_empty.dts new file mode 100644 index 0000000000..2b78d3ae88 --- /dev/null +++ b/tools/binman/test/80_fill_empty.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + size = <16>; + fill { + size = <0>; + fill-byte = [ff]; + }; + }; +}; diff --git a/tools/binman/test/81_powerpc_mpc85xx_bootpg_resetvec.dts b/tools/binman/test/81_powerpc_mpc85xx_bootpg_resetvec.dts new file mode 100644 index 0000000000..8f4b16c399 --- /dev/null +++ b/tools/binman/test/81_powerpc_mpc85xx_bootpg_resetvec.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + powerpc-mpc85xx-bootpg-resetvec { + }; + }; +}; diff --git a/tools/binman/test/81_x86-start16-tpl.dts b/tools/binman/test/81_x86-start16-tpl.dts new file mode 100644 index 0000000000..68e6bbd68f --- /dev/null +++ b/tools/binman/test/81_x86-start16-tpl.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + size = <16>; + + x86-start16-tpl { + }; + }; +}; diff --git a/tools/binman/test/82_fdt_update_all.dts b/tools/binman/test/82_fdt_update_all.dts new file mode 100644 index 0000000000..284975cc28 --- /dev/null +++ b/tools/binman/test/82_fdt_update_all.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + section { + u-boot-dtb { + }; + }; + u-boot-spl-dtb { + }; + u-boot-tpl-dtb { + }; + }; +}; diff --git a/tools/binman/test/83_compress.dts b/tools/binman/test/83_compress.dts new file mode 100644 index 0000000000..07813bdeaa --- /dev/null +++ b/tools/binman/test/83_compress.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + blob { + filename = "compress"; + compress = "lz4"; + }; + }; +}; diff --git a/tools/binman/test/84_files.dts b/tools/binman/test/84_files.dts new file mode 100644 index 0000000000..83ddb78f8e --- /dev/null +++ b/tools/binman/test/84_files.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + files { + pattern = "files/*.dat"; + compress = "none"; + }; + }; +}; diff --git a/tools/binman/test/85_files_compress.dts b/tools/binman/test/85_files_compress.dts new file mode 100644 index 0000000000..847b398bf2 --- /dev/null +++ b/tools/binman/test/85_files_compress.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + files { + pattern = "files/*.dat"; + compress = "lz4"; + }; + }; +}; diff --git a/tools/binman/test/86_files_none.dts b/tools/binman/test/86_files_none.dts new file mode 100644 index 0000000000..34bd92f224 --- /dev/null +++ b/tools/binman/test/86_files_none.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + files { + pattern = "files/*.none"; + compress = "none"; + require-matches; + }; + }; +}; diff --git a/tools/binman/test/87_files_no_pattern.dts b/tools/binman/test/87_files_no_pattern.dts new file mode 100644 index 0000000000..0cb5b469cb --- /dev/null +++ b/tools/binman/test/87_files_no_pattern.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + files { + compress = "none"; + require-matches; + }; + }; +}; diff --git a/tools/binman/test/88_expand_size.dts b/tools/binman/test/88_expand_size.dts new file mode 100644 index 0000000000..c8a01308ec --- /dev/null +++ b/tools/binman/test/88_expand_size.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + size = <40>; + fill { + expand-size; + fill-byte = [61]; + size = <0>; + }; + u-boot { + offset = <8>; + }; + section { + expand-size; + pad-byte = <0x62>; + intel-mrc { + }; + }; + u-boot2 { + type = "u-boot"; + offset = <16>; + }; + section2 { + type = "section"; + fill { + expand-size; + fill-byte = [63]; + size = <0>; + }; + u-boot { + offset = <8>; + }; + }; + fill2 { + type = "fill"; + expand-size; + fill-byte = [64]; + size = <0>; + }; + }; +}; diff --git a/tools/binman/test/89_expand_size_bad.dts b/tools/binman/test/89_expand_size_bad.dts new file mode 100644 index 0000000000..edc0e5cf68 --- /dev/null +++ b/tools/binman/test/89_expand_size_bad.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + _testing { + expand-size; + return-contents-once; + }; + u-boot { + offset = <8>; + }; + }; +}; diff --git a/tools/binman/test/90_hash.dts b/tools/binman/test/90_hash.dts new file mode 100644 index 0000000000..200304599d --- /dev/null +++ b/tools/binman/test/90_hash.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + u-boot { + hash { + algo = "sha256"; + }; + }; + }; +}; diff --git a/tools/binman/test/91_hash_no_algo.dts b/tools/binman/test/91_hash_no_algo.dts new file mode 100644 index 0000000000..b64df20511 --- /dev/null +++ b/tools/binman/test/91_hash_no_algo.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + u-boot { + hash { + }; + }; + }; +}; diff --git a/tools/binman/test/92_hash_bad_algo.dts b/tools/binman/test/92_hash_bad_algo.dts new file mode 100644 index 0000000000..d2402000db --- /dev/null +++ b/tools/binman/test/92_hash_bad_algo.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + u-boot { + hash { + algo = "invalid"; + }; + }; + }; +}; diff --git a/tools/binman/test/93_x86_tpl_ucode.dts b/tools/binman/test/93_x86_tpl_ucode.dts new file mode 100644 index 0000000000..d7ed9fc66b --- /dev/null +++ b/tools/binman/test/93_x86_tpl_ucode.dts @@ -0,0 +1,29 @@ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + sort-by-offset; + end-at-4gb; + size = <0x200>; + u-boot-tpl-with-ucode-ptr { + }; + + u-boot-tpl-dtb-with-ucode { + }; + + u-boot-ucode { + }; + }; + + microcode { + update@0 { + data = <0x12345678 0x12345679>; + }; + update@1 { + data = <0xabcd0000 0x78235609>; + }; + }; +}; diff --git a/tools/binman/test/94_fmap_x86.dts b/tools/binman/test/94_fmap_x86.dts new file mode 100644 index 0000000000..613c5dab42 --- /dev/null +++ b/tools/binman/test/94_fmap_x86.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + end-at-4gb; + size = <0x100>; + pad-byte = <0x61>; + u-boot { + }; + intel-mrc { + }; + fmap { + offset = <0xffffff20>; + }; + }; +}; diff --git a/tools/binman/test/95_fmap_x86_section.dts b/tools/binman/test/95_fmap_x86_section.dts new file mode 100644 index 0000000000..4cfce45670 --- /dev/null +++ b/tools/binman/test/95_fmap_x86_section.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + end-at-4gb; + size = <0x100>; + u-boot { + }; + section { + pad-byte = <0x62>; + intel-mrc { + }; + fmap { + offset = <0x20>; + }; + }; + }; +}; diff --git a/tools/binman/test/96_elf.dts b/tools/binman/test/96_elf.dts new file mode 100644 index 0000000000..df3440c319 --- /dev/null +++ b/tools/binman/test/96_elf.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + u-boot-elf { + }; + u-boot-spl-elf { + }; + }; +}; diff --git a/tools/binman/test/97_elf_strip.dts b/tools/binman/test/97_elf_strip.dts new file mode 100644 index 0000000000..6f3c66fd70 --- /dev/null +++ b/tools/binman/test/97_elf_strip.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + u-boot-elf { + strip; + }; + u-boot-spl-elf { + }; + }; +}; diff --git a/tools/binman/test/99_hash_section.dts b/tools/binman/test/99_hash_section.dts new file mode 100644 index 0000000000..dcd8683d64 --- /dev/null +++ b/tools/binman/test/99_hash_section.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + section { + u-boot { + }; + fill { + size = <0x10>; + fill-byte = [61]; + }; + hash { + algo = "sha256"; + }; + }; + }; +}; diff --git a/tools/binman/test/files/1.dat b/tools/binman/test/files/1.dat new file mode 100644 index 0000000000..a952470617 --- /dev/null +++ b/tools/binman/test/files/1.dat @@ -0,0 +1 @@ +sorry I'm late diff --git a/tools/binman/test/files/2.dat b/tools/binman/test/files/2.dat new file mode 100644 index 0000000000..687ea52730 --- /dev/null +++ b/tools/binman/test/files/2.dat @@ -0,0 +1 @@ +Oh, don't bother apologising, I'm sorry you're alive diff --git a/tools/binman/test/files/ignored_dir.dat/ignore b/tools/binman/test/files/ignored_dir.dat/ignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/tools/binman/test/files/ignored_dir.dat/ignore diff --git a/tools/binman/test/files/not-this-one b/tools/binman/test/files/not-this-one new file mode 100644 index 0000000000..e71c2250f9 --- /dev/null +++ b/tools/binman/test/files/not-this-one @@ -0,0 +1 @@ +this does not have a .dat extenion diff --git a/tools/buildman/builder.py b/tools/buildman/builder.py index a5a2ffdfdf..05f8299541 100644 --- a/tools/buildman/builder.py +++ b/tools/buildman/builder.py @@ -408,7 +408,7 @@ class Builder: """ cmd = [self.gnu_make] + list(args) result = command.RunPipe([cmd], capture=True, capture_stderr=True, - cwd=cwd, raise_on_error=False, **kwargs) + cwd=cwd, raise_on_error=False, infile='/dev/null', **kwargs) if self.verbose_build: result.stdout = '%s\n' % (' '.join(cmd)) + result.stdout result.combined = '%s\n' % (' '.join(cmd)) + result.combined diff --git a/tools/dtoc/fdt.py b/tools/dtoc/fdt.py index 55baa3857f..2df2d4b0cc 100644 --- a/tools/dtoc/fdt.py +++ b/tools/dtoc/fdt.py @@ -43,6 +43,7 @@ class Prop: self.name = name self.value = None self.bytes = str(bytes) + self.dirty = False if not bytes: self.type = TYPE_BOOL self.value = True @@ -145,7 +146,7 @@ class Prop: if type == TYPE_BYTE: return chr(0) elif type == TYPE_INT: - return struct.pack('<I', 0); + return struct.pack('>I', 0); elif type == TYPE_STRING: return '' else: @@ -160,6 +161,55 @@ class Prop: self._node._fdt.CheckCache() return self._node._fdt.GetStructOffset(self._offset) + def SetInt(self, val): + """Set the integer value of the property + + The device tree is marked dirty so that the value will be written to + the block on the next sync. + + Args: + val: Integer value (32-bit, single cell) + """ + self.bytes = struct.pack('>I', val); + self.value = val + self.type = TYPE_INT + self.dirty = True + + def SetData(self, bytes): + """Set the value of a property as bytes + + Args: + bytes: New property value to set + """ + self.bytes = str(bytes) + self.type, self.value = self.BytesToValue(bytes) + self.dirty = True + + def Sync(self, auto_resize=False): + """Sync property changes back to the device tree + + This updates the device tree blob with any changes to this property + since the last sync. + + Args: + auto_resize: Resize the device tree automatically if it does not + have enough space for the update + + Raises: + FdtException if auto_resize is False and there is not enough space + """ + if self._offset is None or self.dirty: + node = self._node + fdt_obj = node._fdt._fdt_obj + if auto_resize: + while fdt_obj.setprop(node.Offset(), self.name, self.bytes, + (libfdt.NOSPACE,)) == -libfdt.NOSPACE: + fdt_obj.resize(fdt_obj.totalsize() + 1024) + fdt_obj.setprop(node.Offset(), self.name, self.bytes) + else: + fdt_obj.setprop(node.Offset(), self.name, self.bytes) + + class Node: """A device tree node @@ -284,25 +334,125 @@ class Node: Args: prop_name: Name of property """ - fdt_obj = self._fdt._fdt_obj - if fdt_obj.setprop_u32(self.Offset(), prop_name, 0, - (libfdt.NOSPACE,)) == -libfdt.NOSPACE: - fdt_obj.resize(fdt_obj.totalsize() + 1024) - fdt_obj.setprop_u32(self.Offset(), prop_name, 0) - self.props[prop_name] = Prop(self, -1, prop_name, '\0' * 4) - self._fdt.Invalidate() + self.props[prop_name] = Prop(self, None, prop_name, '\0' * 4) + + def AddEmptyProp(self, prop_name, len): + """Add a property with a fixed data size, for filling in later + + The device tree is marked dirty so that the value will be written to + the blob on the next sync. + + Args: + prop_name: Name of property + len: Length of data in property + """ + value = chr(0) * len + self.props[prop_name] = Prop(self, None, prop_name, value) def SetInt(self, prop_name, val): """Update an integer property int the device tree. This is not allowed to change the size of the FDT. + The device tree is marked dirty so that the value will be written to + the blob on the next sync. + Args: prop_name: Name of property val: Value to set """ - fdt_obj = self._fdt._fdt_obj - fdt_obj.setprop_u32(self.Offset(), prop_name, val) + self.props[prop_name].SetInt(val) + + def SetData(self, prop_name, val): + """Set the data value of a property + + The device tree is marked dirty so that the value will be written to + the blob on the next sync. + + Args: + prop_name: Name of property to set + val: Data value to set + """ + self.props[prop_name].SetData(val) + + def SetString(self, prop_name, val): + """Set the string value of a property + + The device tree is marked dirty so that the value will be written to + the blob on the next sync. + + Args: + prop_name: Name of property to set + val: String value to set (will be \0-terminated in DT) + """ + self.props[prop_name].SetData(val + chr(0)) + + def AddString(self, prop_name, val): + """Add a new string property to a node + + The device tree is marked dirty so that the value will be written to + the blob on the next sync. + + Args: + prop_name: Name of property to add + val: String value of property + """ + self.props[prop_name] = Prop(self, None, prop_name, val + chr(0)) + + def AddSubnode(self, name): + """Add a new subnode to the node + + Args: + name: name of node to add + + Returns: + New subnode that was created + """ + path = self.path + '/' + name + subnode = Node(self._fdt, self, None, name, path) + self.subnodes.append(subnode) + return subnode + + def Sync(self, auto_resize=False): + """Sync node changes back to the device tree + + This updates the device tree blob with any changes to this node and its + subnodes since the last sync. + + Args: + auto_resize: Resize the device tree automatically if it does not + have enough space for the update + + Raises: + FdtException if auto_resize is False and there is not enough space + """ + if self._offset is None: + # The subnode doesn't exist yet, so add it + fdt_obj = self._fdt._fdt_obj + if auto_resize: + while True: + offset = fdt_obj.add_subnode(self.parent._offset, self.name, + (libfdt.NOSPACE,)) + if offset != -libfdt.NOSPACE: + break + fdt_obj.resize(fdt_obj.totalsize() + 1024) + else: + offset = fdt_obj.add_subnode(self.parent._offset, self.name) + self._offset = offset + + # Sync subnodes in reverse so that we don't disturb node offsets for + # nodes that are earlier in the DT. This avoids an O(n^2) rescan of + # node offsets. + for node in reversed(self.subnodes): + node.Sync(auto_resize) + + # Sync properties now, whose offsets should not have been disturbed. + # We do this after subnodes, since this disturbs the offsets of these + # properties. + prop_list = sorted(self.props.values(), key=lambda prop: prop._offset, + reverse=True) + for prop in prop_list: + prop.Sync(auto_resize) class Fdt: @@ -322,6 +472,20 @@ class Fdt: with open(self._fname) as fd: self._fdt_obj = libfdt.Fdt(fd.read()) + @staticmethod + def FromData(data): + """Create a new Fdt object from the given data + + Args: + data: Device-tree data blob + + Returns: + Fdt object containing the data + """ + fdt = Fdt(None) + fdt._fdt_obj = libfdt.Fdt(bytearray(data)) + return fdt + def LookupPhandle(self, phandle): """Look up a phandle @@ -381,6 +545,19 @@ class Fdt: with open(self._fname, 'wb') as fd: fd.write(self._fdt_obj.as_bytearray()) + def Sync(self, auto_resize=False): + """Make sure any DT changes are written to the blob + + Args: + auto_resize: Resize the device tree automatically if it does not + have enough space for the update + + Raises: + FdtException if auto_resize is False and there is not enough space + """ + self._root.Sync(auto_resize) + self.Invalidate() + def Pack(self): """Pack the device tree down to its minimum size diff --git a/tools/dtoc/test_fdt.py b/tools/dtoc/test_fdt.py index e88d19f80e..d259702050 100755 --- a/tools/dtoc/test_fdt.py +++ b/tools/dtoc/test_fdt.py @@ -337,6 +337,7 @@ class TestProp(unittest.TestCase): self.node.AddZeroProp('one') self.node.AddZeroProp('two') self.node.AddZeroProp('three') + self.dtb.Sync(auto_resize=True) # Updating existing properties should be OK, since the device-tree size # does not change @@ -344,11 +345,75 @@ class TestProp(unittest.TestCase): self.node.SetInt('one', 1) self.node.SetInt('two', 2) self.node.SetInt('three', 3) + self.dtb.Sync(auto_resize=False) # This should fail since it would need to increase the device-tree size + self.node.AddZeroProp('four') with self.assertRaises(libfdt.FdtException) as e: - self.node.SetInt('four', 4) + self.dtb.Sync(auto_resize=False) self.assertIn('FDT_ERR_NOSPACE', str(e.exception)) + self.dtb.Sync(auto_resize=True) + + def testAddNode(self): + self.fdt.pack() + self.node.AddSubnode('subnode') + with self.assertRaises(libfdt.FdtException) as e: + self.dtb.Sync(auto_resize=False) + self.assertIn('FDT_ERR_NOSPACE', str(e.exception)) + + self.dtb.Sync(auto_resize=True) + offset = self.fdt.path_offset('/spl-test/subnode') + self.assertTrue(offset > 0) + + def testAddMore(self): + """Test various other methods for adding and setting properties""" + self.node.AddZeroProp('one') + self.dtb.Sync(auto_resize=True) + data = self.fdt.getprop(self.node.Offset(), 'one') + self.assertEqual(0, fdt32_to_cpu(data)) + + self.node.SetInt('one', 1) + self.dtb.Sync(auto_resize=False) + data = self.fdt.getprop(self.node.Offset(), 'one') + self.assertEqual(1, fdt32_to_cpu(data)) + + val = '123' + chr(0) + '456' + self.node.AddString('string', val) + self.dtb.Sync(auto_resize=True) + data = self.fdt.getprop(self.node.Offset(), 'string') + self.assertEqual(val + '\0', data) + + self.fdt.pack() + self.node.SetString('string', val + 'x') + with self.assertRaises(libfdt.FdtException) as e: + self.dtb.Sync(auto_resize=False) + self.assertIn('FDT_ERR_NOSPACE', str(e.exception)) + self.node.SetString('string', val[:-1]) + + prop = self.node.props['string'] + prop.SetData(val) + self.dtb.Sync(auto_resize=False) + data = self.fdt.getprop(self.node.Offset(), 'string') + self.assertEqual(val, data) + + self.node.AddEmptyProp('empty', 5) + self.dtb.Sync(auto_resize=True) + prop = self.node.props['empty'] + prop.SetData(val) + self.dtb.Sync(auto_resize=False) + data = self.fdt.getprop(self.node.Offset(), 'empty') + self.assertEqual(val, data) + + self.node.SetData('empty', '123') + self.assertEqual('123', prop.bytes) + + def testFromData(self): + dtb2 = fdt.Fdt.FromData(self.dtb.GetContents()) + self.assertEqual(dtb2.GetContents(), self.dtb.GetContents()) + + self.node.AddEmptyProp('empty', 5) + self.dtb.Sync(auto_resize=True) + self.assertTrue(dtb2.GetContents() != self.dtb.GetContents()) class TestFdtUtil(unittest.TestCase): diff --git a/tools/patman/tools.py b/tools/patman/tools.py index e80481438b..1c9bf4e810 100644 --- a/tools/patman/tools.py +++ b/tools/patman/tools.py @@ -4,6 +4,7 @@ # import command +import glob import os import shutil import tempfile @@ -22,6 +23,10 @@ chroot_path = None # Search paths to use for Filename(), used to find files search_paths = [] +# Tools and the packages that contain them, on debian +packages = { + 'lz4': 'liblz4-tool', + } def PrepareOutputDir(dirname, preserve=False): """Select an output directory, ensuring it exists. @@ -119,6 +124,23 @@ def GetInputFilename(fname): raise ValueError("Filename '%s' not found in input path (%s) (cwd='%s')" % (fname, ','.join(indir), os.getcwd())) +def GetInputFilenameGlob(pattern): + """Return a list of filenames for use as input. + + Args: + pattern: Filename pattern to search for + + Returns: + A list of matching files in all input directories + """ + if not indir: + return glob.glob(fname) + files = [] + for dirname in indir: + pathname = os.path.join(dirname, pattern) + files += glob.glob(pathname) + return sorted(files) + def Align(pos, align): if align: mask = align - 1 @@ -128,8 +150,31 @@ def Align(pos, align): def NotPowerOfTwo(num): return num and (num & (num - 1)) +def PathHasFile(fname): + """Check if a given filename is in the PATH + + Args: + fname: Filename to check + + Returns: + True if found, False if not + """ + for dir in os.environ['PATH'].split(':'): + if os.path.exists(os.path.join(dir, fname)): + return True + return False + def Run(name, *args): - command.Run(name, *args, cwd=outdir) + try: + return command.Run(name, *args, cwd=outdir, capture=True) + except: + if not PathHasFile(name): + msg = "Plesae install tool '%s'" % name + package = packages.get(name) + if package: + msg += " (e.g. from package '%s')" % package + raise ValueError(msg) + raise def Filename(fname): """Resolve a file path to an absolute path. |