summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-06-28rockchip: correctly set vop0 or vop1Patrick Wildt
The EDP_LCDC_SEL bit has to be set correctly to select vop0 or vop1, but so far we have set it in both conditions, which is not correct. Can someone verify this is the correct way round? vop1 -> set, vop0 -> clear? Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-28video: orisetech_otm8009a: fill characteristics of DSI data linkYannick Fertre
Fill characteristics of DSI data link to platform data instead of mipi device to avoid memory corruption. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-28video: raydium_rm68200: fill characteristics of DSI data linkYannick Fertre
Fill characteristics of DSI data link to platform data instead of mipi device to avoid memory corruption. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-28video: stm32: stm32_dsi: copy DSI fieldsYannick Fertre
Copy the DSI data link characteristics from panel platform data to mipi DSI device. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-28video: mipi update panel platform dataYannick Fertre
Add new fields "lanes, format & mode_flags" to structure mipi_dsi_panel_plat. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-28video: check hardware version of DSIYannick Fertre
Check the hardware version of DSI. Versions 1.30 & 1.31 are only supported. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
2020-06-28splash: Fix build warning on 64 bits CPUYe Li
Get below warning on ARM64 platform, because the bmp_load_addr is defined to u32. common/splash.c: In function ‘splash_video_logo_load’: common/splash.c:74:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 74 | memcpy((void *)bmp_load_addr, bmp_logo_bitmap, Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # bpi-m1+, bpi-m64
2020-06-28video: vidconsole: avoid multiple lines overwrite logoYe Li
Fix the bug that multiple lines wraps to overwrite logo bmp display. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # bpi-m1+, bpi-m64
2020-06-28video: bmp: support 8bits BMP drawing on 24/32 bpp framebufferYe Li
Update video bmp code so that we can display 8 bits logo on 24 or 32 bpp framebuffer. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # bpi-m1+, bpi-m64
2020-06-27rockchip: clk: rk3188: change APLL to safe 600MHzAlexander Kochetkov
The commit 84a6a27ae3ff ("rockchip: rk3188: init CPU freq in clock driver") changed ARM clock from 600MHz to 1600MHz. It made boot unstable due to the fact that PMIC at the start generates insufficient voltage for operation. See also: commit f4f57c58b589 ("rockchip: rk3188: Setup the armclk in spl"). Fixes commit 84a6a27ae3ff ("rockchip: rk3188: init CPU freq in clock driver"). Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-27rockchip: rk3188: Fix back to BROM bootAlexander Kochetkov
Move the setting for noc remap out of SPL code. Changing noc remap inside SPL results in breaking back to BROM boot. Fixes commit c14fe2a8e192 ("rockchip: rk3188: Move SoC one time setting into arch_cpu_init()"). Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-27rk3399: Add BOOTENV_SF commandJagan Teki
Add missing BOOTENV_SF command in rk3399 config. Fix it. Fixes: f263b860acf8 ("rk3399: Enable SF distro bootcmd") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reported-by: Suniel Mahesh <sunil@amarulasolutions.com> Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-26spi: Enable missing CONFIG_SPL_DM_SPI supportTom Rini
Due to how the Makefile logic is we currently get DM_SPI support in SPL enabled by having DM_SPI enabled for full U-Boot but not having CONFIG_SPL_DM_SPI set. Add this missing option to boards that were inadvertently making use of it. Cc: Adam Ford <aford173@gmail.com> Cc: Akash Gajjar <akash@openedev.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Chee Hong Ang <chee.hong.ang@intel.com> Cc: Chin-Liang See <clsee@altera.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Cc: Heiko Schocher <hs@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Klaus Goger <klaus.goger@theobroma-systems.com> Cc: Levin Du <djw@t-chip.com.cn> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Marek Vasut <marex@denx.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Looijmans <mike.looijmans@topic.nl> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pavel Machek <pavel@denx.de> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: Suniel Mahesh <sunil@amarulasolutions.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Wolfgang Grandegger <wg@aries-embedded.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-06-26Kconfig: Remove CONFIG_CLOCKS_IN_MHZTom Rini
This variable is unset anywhere and only unset on a number of platforms. Remove all relevant code. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOOTM_NETBSD to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTM_NETBSD Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26arm: imx: Finish migration of CONFIG_CSF_SIZE to KconfigTom Rini
While in most cases CSF_SIZE is handled via Kconfig we have some i.MX8M platforms that set the size based on the now-renamed CONFIG_SECURE_BOOT symbol. Update things so that CSF_SIZE itself depends on IMX_HAB being enabled and provide the default value for i.MX8M family of parts. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ye Li <ye.li@nxp.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Fixes: d714a75fd4dc ("imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB") Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Ye Li <ye.li@nxp.com>
2020-06-26nxp: Finish switch to CONFIG_NXP_ESBCTom Rini
There are two remaining users of the CONFIG_SECURE_BOOT symbol that have not been migrated to another symbol. In this case, they should be using CONFIG_NXP_ESBC as their guard. Cc: Vladimir Oltean <olteanv@gmail.com> Fixes: 5536c3c9d0d1 ("freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name") Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HABTom Rini
There are a few remaining places where we say CONFIG_SECURE_BOOT rather than CONFIG_IMX HAB. Update these instances. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Cc: Eddy Petrișor <eddy.petrisor@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Priyanka Jain <priyanka.jain@nxp.com> Fixes: d714a75fd4dc ("imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB") Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-06-26Convert CONFIG_CONSOLE_SCROLL_LINES to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONSOLE_SCROLL_LINES Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26arm: toradex: Convert CONFIG_CONSOLE_MUX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONSOLE_MUX Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-26Convert CONFIG_CONS_INDEX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONS_INDEX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_CMDLINE_EDITING to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CMDLINE_EDITING Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BUILD_TARGET to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BUILD_TARGET Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOUNCE_BUFFER to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOUNCE_BUFFER Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOOTP_DNS2 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTP_DNS2 CONFIG_BOOTP_PXE_CLIENTARCH Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26arm: abb secu1: Convert CONFIG_BOOTDELAY to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTDELAY Cc: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26arm: capricorn: Convert CONFIG_BOOTCOUNT_ENV et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTCOUNT_ENV CONFIG_BOOTCOUNT_LIMIT Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOARD_TYPES to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_TYPES Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BCH to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BCH Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOOTARGS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOARD_EARLY_INIT_F et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F CONFIG_BOARD_EARLY_INIT_R Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BAUDRATE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BAUDRATE Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26bk4r1: Re-convert CONFIG_AUTOBOOT_PROMPT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_AUTOBOOT_PROMPT CONFIG_AUTOBOOT_KEYED CONFIG_AUTOBOOT_STOP_STR Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ATMEL_USART to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ATMEL_USART Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ATMEL_NAND_HW_PMECC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ATMEL_NAND_HW_PMECC CONFIG_ATMEL_NAND_HWECC CONFIG_NAND_ATMEL CONFIG_PMECC_CAP CONFIG_PMECC_SECTOR_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ATMEL_HLCD to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ATMEL_HLCD Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_AT91_GPIO to KconfigTom Rini
This converts the following to Kconfig: CONFIG_AT91_GPIO Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ARM_PL180_MMCI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARM_PL180_MMCI Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ARCH_MISC_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARCH_MISC_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_AM335X_LCD to KconfigTom Rini
This converts the following to Kconfig: CONFIG_AM335X_LCD Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Merge branch 'for-tom' of https://github.com/lftan/u-bootTom Rini
- arm: socfpga: misc_s10: Fix EMAC register address calculation
2020-06-26arm: socfpga: misc_s10: Fix EMAC register address calculationLey Foon Tan
Fix EMAC register address calculation, address need to multiply with sizeof(u32) or 4. This fixes write to invalid address. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-06-25Merge branch '2020-06-25-tidy-up-bd-command' into nextTom Rini
- Tidy up the 'bdinfo' command so that it's both consistent for all architectures and sharing as much code as possible.
2020-06-25Merge tag 'efi-2020-07-rc6' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc6 Corrections for variable definitions are provided: * Correct size of secure boot related UEFI variables. * Do not use int for storing an enum. * Replace fdt_addr by fdt_size where needed.
2020-06-25bdinfo: x86: vesa: Update fb_base to the correct valueSimon Glass
Set this value in global_data so that it is reported correctly on x86 boards. In fact, U-Boot allocates space for the frame buffer even though it is not used. Then the FSP picks the address itself (e.g. 0xb0000000). So the value set by U-Boot (high in memory with everything else that is relocated), is not actually the correct value. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: dm: Update fb_base when using driver modelSimon Glass
Update this value with the address of a video device so that it shows with the 'bd' command. It would be better to obtain the address from the uclass by looking in struct video_uc_platdata for each device. We can move over to that once DM_VIDEO migration is complete. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: Update the file commentsSimon Glass
Update the comment at the top of the file to indicate what this file does. Also drop the line at the bottom and an unnecessary header include. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25bdinfo: m68k: ppc: Move arch-specific code from bdinfoSimon Glass
We don't have an easy way to share these three lines of code with two architectures. We also want to make it clear that this code is actually arch-specific. So just duplicate it in each arch-specific file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-06-25bdinfo: m68k: Move m68k-specific info into its own fileSimon Glass
We don't really want to have m68k-specific code in a generic file. Create a new arch-specific function to hold it, and move it into that. Make the function weak so that any arch can implement it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Angelo Dureghello <angelo.dureghello@timesys.com> Tested-by: Angelo Dureghello <angelo.dureghello@timesys.com>
2020-06-25bdinfo: ppc: Move PPC-specific info into its own fileSimon Glass
We don't really want to have PPC-specific code in a generic file. Create a new arch-specific function to hold it, and move it into that. Make the function weak so that any arch can implement it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
generated by cgit (git 2.34.1) at 2025-01-12 20:27:06 +0000