summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-01-10Makefile: remove MLO.byteswap on clobberNishanth Menon
On clobber, do a cleanup even for SPL build else, we'd have MLO.byteswap remaining for certain platforms like am33xx SPL builds Signed-off-by: Nishanth Menon <nm@ti.com>
2013-01-10OMAP3: igep00x0: add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_NAND_SUPPORTJavier Martinez Canillas
When booting an IGEPv2 board from NAND with SPL, U-Boot hangs trying to read the OMAP General Purpose Memory Controller (GPMC). The reason is that the GPMC initialization function is called inside spl_board_init() and this function is only executed when CONFIG_SPL_BOARD_INIT is defined. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
2013-01-10Prepare v2013.01-rc3Tom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2013-01-10bootm: relocate names of sub-command table for archs with ↵Daniel Schwierzeck
CONFIG_NEEDS_MANUAL_RELOC To make bootm sub-command feature working on archs with CONFIG_NEEDS_MANUAL_RELOC, the name pointers in the sub-command table need to be relocated. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-01-10arm: Tabify code for MMC initializationTaylor Hutt
The two modified lines were indented with spaces. They are now indented with tabs. Signed-off-by: Taylor Hutt <thutt@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10arm: Move bootstage record for board_init_f() to after arch_cpu_init()Simon Glass
The timer may be inited in arch_cpu_init() so it is not safe to make a bootstage mark before this is called. Arrange the code to fix this. Note: The question was raised as to why we don't keep all archs in sync. PowerPC doesn't have specific bootstage markers at present (although it does use boot progress). I hope that the generic board series will solve this problem in general, but in the meantime this is a real problem, and only in ARM. We now get a correct time for board_init_f: Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 100,000 100,000 spl_start 848,530 748,530 board_init_f 907,301 58,771 board_init_r 910,478 3,177 board_init Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10arm: Make interrupts.o and reset.o in libarm also appear in SPLTom Wai-Hong Tam
SPL u-boot may call do_reset() which depends on interrupts.o and reset.o. So make them also appear in SPL. Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10Add option to display customised memory informationSimon Glass
Some boards want to report more than just memory size. For example, it might be useful to display the memory type (DDR2, DDR3) or manufacturer. Add a weak function to support this requirement, accessed through a new 'meminfo' command. Any example of the DRAM: output is below, just for illustration: SMDK5250 # meminfo DRAM: 2 GiB Elpida DDR3 @ 800MHz Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10arm: Add CONFIG_DISPLAY_BOARDINFO_LATE to display board info on LCDSimon Glass
This option displays board info after stdio is running, so that it will appear on the LCD. If it is displayed earlier, the board info will appear on the serial console but not on the LCD. Here follows a blow-by-blow description. 1a. Without CONFIG_DISPLAY_BOARDINFO_LATE, on serial: U-Boot 2011.12-02550-g037e1c5-dirty (Nov 15 2012 - 14:29:42) for SMDK5250 CPU: S5PC520 @ 1700MHz Board: Google Snow, rev 0 I2C: ready DRAM: 2 GiB Elpida DDR3 @ 800MHz MMC: S5P MSHC0: 0, S5P MSHC1: 1 SF: Detected W25Q32 with page size 4 KiB, total 4 MiB *** Warning - bad CRC, using default environment In: mkbp-keyb Out: lcd Err: lcd Net: No ethernet found. Hit any key to stop autoboot: 0 SMDK5250 # 1b. Without CONFIG_DISPLAY_BOARDINFO_LATE, on LCD (note machine info is missing): In: mkbp-keyb Out: lcd Err: lcd Net: No ethernet found. Hit any key to stop autoboot: 0 SMDK5250 # 2a. With CONFIG_DISPLAY_BOARDINFO_LATE, on serial: U-Boot 2011.12-02550-g037e1c5 (Nov 15 2012 - 14:27:40) for SMDK5250 CPU: S5PC520 @ 1700MHz I2C: ready DRAM: 2 GiB Elpida DDR3 @ 800MHz MMC: S5P MSHC0: 0, S5P MSHC1: 1 SF: Detected W25Q32 with page size 4 KiB, total 4 MiB *** Warning - bad CRC, using default environment Model: Google Snow In: mkbp-keyb Out: lcd Err: lcd Net: No ethernet found. Hit any key to stop autoboot: 0 SMDK5250 # 2b. With CONFIG_DISPLAY_BOARDINFO_LATE, on LCD (note machine info is present): Model: Google Snow In: mkbp-keyb Out: lcd Err: lcd Net: No ethernet found. Hit any key to stop autoboot: 0 SMDK5250 # Since the LCD is all that a typical user sees, it is useful to display the model there. We may be able to rearrange things some other way one day, but at present this seems like a convenient way of getting the required behaviour. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10Document the CONFIG_DISPLAY_BOARDINFO optionSimon Glass
Add a short note about this in the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loadingSimon Glass
This option delays loading of the environment until later, so that only the default environment will be available to U-Boot. This can address the security risk of untrusted data being used during boot. Any time you load untrusted data you expose yourself to a bug in the code. The attacker gets to choose the data so can sometimes carefully craft it to exploit a bug. We try to avoid touching user-controlled data during a verified boot unless strictly necessary. Since the default environment is good enough in this case (or you would just change it), this gets around the problem by just not loading the environment. When CONFIG_DELAY_ENVIRONMENT is defined, it is convenient to have a run-time way of enabling loading of the environment. Add this to the fdt as /config/delay-environment. Note: This patch depends on http://patchwork.ozlabs.org/patch/194342/ Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org>
2013-01-10arm: Move fdt check earlier so that board_early_init_f() can use itSimon Glass
We want to use the fdt inside board_early_init_f(), so check for its presence earlier in the pre-reloc init sequence. So far ARM and microblaze are the only only ones that use CONFIG_OF_CONTROL. Microblaze does not have the same init loop, and in particular does not have the board_early_init_f() call. So a patch for microblaze would have no meaning. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10arm: Keep track of the tlb size as well as its locationGabe Black
It may be necessary to know where the TLB area ends as well as where it starts. This allows board code to complete a secure memory erase without destroying the page tables. Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10arm: move flush_dcache_all() to just before disable cacheArun Mankuzhi
In Cortex-A15 architecture, when we run cache invalidate the cache clean operation executes automatically. So if there are any dirty cache lines before disabling the L2 cache these will be synchronized with the main memory when invalidate_dcache_all() runs in the last part of U-boot The two functions after flush_dcache_all is using the stack. So this data will be on the cache. After disable when invalidate is called the data will be flushed from cache to memory. This corrupts the stack in invalida_dcache_all. So this change is required to avoid the u-boot hang. So flush has to be done just before clearing CR_C bit Signed-off-by: Arun Mankuzhi <arun.m@samsung.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10cfi_flash: Report Advanced Sector Protection (PPB) with flinfo cmdStefan Roese
Report the usage of the Advanced Sector Protection (PPB) to the user upon 'flinfo' command. E.g: Bank # 1: CFI conformant flash (16 x 16) Size: 64 MB in 512 Sectors AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E2301 Advanced Sector Protection (PPB) enabled Erase timeout: 16384 ms, write timeout: 2 ms Buffer write timeout: 5 ms, buffer size: 32 bytes Sector Start Addresses: FC000000 E FC020000 E RO FC040000 E FC060000 E FC080000 E ... Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Holger Brunck <holger.brunck@keymile.com> Tested-by: Holger Brunck <holger.brunck@keymile.com>
2013-01-10cfi_flash: Enable PPB protection for all AMD cmdset flash chipsStefan Roese
Not only Spansion supports the Persistent Protection Bits (PPB) locking. Other devices like the Micron JS28F512M29EWx also support this type of locking/unlocking. Detection of support is done in the same way as done for the Spansion chips - via the 0x49 CFI word. This patch enables this PPB protection mechanism for all AMD type (AMD commandset) chips. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Holger Brunck <holger.brunck@keymile.com> Tested-by: Holger Brunck <holger.brunck@keymile.com>
2013-01-10cfi_flash: Read PPB sector protection from device for AMD/Spansion chipsStefan Roese
Patch 66863b05 [cfi_flash: add support for Spansion flash PPB sector protection] introduced the PPB (Persistent Protection Bit) locking for Spansion chips. But right now the sector protection status (locked vs unlocked) is set to unlocked for all sectors upon bootup. The real sector protection status is ignored. This patch now reads the current sector protection status and uses it for these AMD/Spansion flash chips. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Holger Brunck <holger.brunck@keymile.com> Tested-by: Holger Brunck <holger.brunck@keymile.com>
2013-01-10cfi_flash: Add manufact_match helper functionStefan Roese
Consolidate manufacturer matching into the function manufact_match() and use it. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Holger Brunck <holger.brunck@keymile.com>
2013-01-10mtd/cfi: add support for SST 4KB sector granularityAngelo Dureghello
Add support for SST 4KB sector granularity. Many recent SST flashes, i.e. SST39VF3201B and similar of this family are declared CFI-conformant from SST. They support CFI query, but implement 2 different sector sizes in the same memory: a 64KB sector (they call it "block", std AMD erase cmd=0x30), and a 4KB sector (they call it "sector", erase cmd=0x50). Also, CFI query on these chips, reading from address 0x2dh of cfi query struct, detects a number of secotrs for the 4KB granularity (flinfo shows it). For all other aspects, they are CFI compliant, so, as Linux do, i think it's a good idea to handle these chips in the CFI driver, with a fixup to allow 4KB granularity, as should be expected, instead of 64KB. Signed-off-by: Angelo Dureghello <sysamfw@gmail.com> Signed-off-by: Stefan Rose <sr@denx.de>
2013-01-10video: Modify exynos_fimd driver to support LCD consoleAjay Kumar
Currently, exynos FIMD driver is being used to support only TIZEN LOGOs. In order to get LCD console, we need to enable half word swap feature of FIMD and use 16 BPP. LCD console and proprietary Logo cannot be used simultaneously. We use "logo_on" field inside vidinfo_t structure to decide whether user wants Logo or Console. Define CONFIG_CMD_BMP and make logo_on = 1 to get Logo on screen. Use logo_on = 0 to get output console on LCD. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-10EXYNOS: Add dummy definition to fix compilation dependency on ↵Ajay Kumar
CONFIG_EXYNOS_MIPI_DSIM When only DP is used, we need not enable CONFIG_EXYNOS_MIPI_DSIM. But if we do not select CONFIG_EXYNOS_MIPI_DSIM, exynos_fb.c throws error saying exynos_mipi_dsi_init() not defined. So, we add dummy definition for exynos_mipi_dsi_init when CONFIG_EXYNOS_MIPI_DSIM is not defined. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-10EXYNOS5: Change parent clock of FIMD to MPLLAjay Kumar
With VPLL as source clock to FIMD, Exynos DP Initializaton was failing sometimes with unstable clock. Changing FIMD source to MPLL resolves this issue. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-10EXYNOS5: Add support for FIMD and DPAjay Kumar
Add panel_info structure required by LCD driver and DP panel platdata for SMDK5250. Add GPIO configuration for LCD. Enable FIMD and DP support on SMDK5250. DP Panel size: 2560x1600. We use 16BPP resolution to get LCD console. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chomium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-10PMIC: MAX77686: Add FDT SupportRajeshwari Shinde
This patch adds fdt support to MAX77686. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-10EXYNOS5: Add device node for PMICRajeshwari Shinde
Add device node for MAX77686 Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-10EXYNOS5: FDT: Add compatible strings for PMICRajeshwari Shinde
Add required compatible information for PMIC Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-09Merge 'u-boot-atmel/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-01-09mx53loco: Add support for SEIKO 4.3'' WVGA panelFabio Estevam
Add support for the Seiko 4.3'' WVGA panel on mx53loco. By default, the CLAA WVGA panel is selected. In order to support the Seiko panel, the enviroment variable 'panel' must be set to 'seiko'. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-09mx6: Add workaround for ARM errataFabio Estevam
Add workaround for the following ARM errata: 743622 and 751472. The motivation for this change is the following kernel commit 62e4d357a (ARM: 7609/1: disable errata work-arounds which access secure registers), which removes the errata from multiplatform kernel. Since imx has been converted to multiplatform in the kernel, we need to apply such workarounds into the bootloader. Workaround code has been taken from arch/arm/mm/proc-v7.S from 3.7.1 kernel. Explanation of each erratum is provided at "Chip Errata for the i.MX 6Dual/6Quad" document available at: cache.freescale.com/files/32bit/doc/errata/IMX6DQCE.pdf Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-09Merge branch 'u-boot-marvell/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-01-09Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2013-01-09Fix SPL build for non-ARM targetsAlbert ARIBAUD
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-01-09video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boardsŁukasz Majewski
lcd_set_flush_dcache(1) function is called from exynos_fb.c configuration file to enable lcd_sync function. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-09mv-common.h: increase malloc arena to 4MiBAndreas Bießmann
This will fix the following error: ---8<--- UBIFS error (pid 0): ubifs_mount: Error reading superblock on volume 'ubi:root' errno=-12! --->8--- Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: prafulla@marvell.com Cc: dimax.main@gmail.com Tested-by: Alex Xol <dimax.main@gmail.com>
2013-01-09arch-kirkwood: Ethernet port macro returning incorrect addressLuke Lowrey
Modified the arch-kirkwood header so KWGBE_PORT_SERIAL_CONTROL1_REG(x) returns the correct address. Originally calling KWGBE_PORT_SERIAL_CONTROL1_REG(1) returned the address for port 0 and vice versa. Doesn't have any knock on effects to the u-boot code as the only time they're used is to do the same function to both addresses Signed-off-by: Luke Lowrey <luke@chamsys.co.uk> Acked-by: Prafulla Wadaskar <Prafulla@marvell.com> Acked-by: Heiko Schocher <hs@denx.de>
2013-01-09lsxl: unset ncip for rescue modeMichael Walle
Instead of using the serverip we get from the DHCP server, implicitly use the broadcast address, which is automatically set when no ncip environment variable is set. That way it isn't necessary to use a special DHCP configuration to set the netconsole peer. Signed-off-by: Michael Walle <michael@walle.cc> Cc: Prafulla Wadaskar <prafulla@marvell.com>
2013-01-09ARM: lacie_kw: add support for WIRELESS_SPACEAlbert ARIBAUD
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-01-09kirkwood: make MPP arrays static constAlbert ARIBAUD
This saves stack and code memory for local copy, and consumes initialized data memory. For 22 of the 29 kirkwood-based boards, this results in a global saving of about 30 bytes. For 7 of them, it results in an increase of 6 to 14 bytes. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-01-09mv88e61xx: refactor PHY and SWITCH level-codeAlbert ARIBAUD
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-01-09arm/km: remove duplicate codeValentin Longchamp
This patch removes 2 small portions of board specific code that are duplicated with common ARM code and thus unnecessary. These 2 portions of code concern the mach id that is given by u-boot to the Linux kernel to identify the system's MACH. The first one was the possibility to change the MACH thanks to the 'mach_id' enviroment variable. This is possible thanks to the 'machid' env variable (see arch/arm/lib/bootm.c:boot_jump_linux()). The seconde one is the setting of the bi_arch_number. This is already done in arch/arm/lib/board.c:board_init_f() since km_arm.h does #define CONFIG_MACH_TYPE. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Prafulla Wadaskar <Prafulla@marvell.com>
2013-01-09km/common: cosmetic change reported from checkpatchHolger Brunck
Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Prafulla Wadaskar <Prafulla@marvell.com>
2013-01-09km/common: drop unneeded std* environment variablesHolger Brunck
These variables are only used if CONFIG_SYS_CONSOLE_IS_IN_ENV is set. This isn't the case, so we can drop them safely. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com>
2013-01-09arm/km: fix memory settingsHolger Brunck
On kmcoge5un we faced some serious problems with the memory during temperature tests. Reason was that we overwrite some registers for memory settings which have to leave untouched. These where registers 0x20148 , 0x2014c and 0x20154. So writing these registers is prohibited and this patch removes them from all km related config files. Even if the problem was only seen on kmcoge5un. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com>
2013-01-08Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2013-01-08arm: remove useless code in start.S filesAlbert ARIBAUD
Remove code such as unneeded includes or labels. These removals have no functional effect. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-01-08arm: move C runtime setup code in crt0.SAlbert ARIBAUD
Move all the C runtime setup code from every start.S in arch/arm into arch/arm/lib/crt0.S. This covers the code sequence from setting up the initial stack to calling into board_init_r(). Also, rewrite the C runtime setup and make functions board_init_*() and relocate_code() behave according to normal C semantics (no jumping across the C stack any more, etc). Some SPL targets had to be touched because they use start.S explicitly or for some reason; the relevant maintainers and custodians are cc:ed. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-01-08Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-01-08Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD
This required manual merging drivers/mtd/nand/Makefile and adding am335x_evm support for CONFIG_SPL_NAND_DRIVERS
2013-01-08SMDK5250: Enable VBus for USB 2.0 controllerVivek Gautam
This patch enables Vbus required for USB 2.0 controller. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-08EXYNOS5: FDT: Add compatible strings for USBRajeshwari Shinde
Add required compatible information for USB Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit (git 2.34.1) at 2024-12-27 03:44:23 +0000