| Age | Commit message (Collapse) | Author |
|---|
|
Add myself as the Maintainer for Actions Semi OWL family and its
relevant board, drivers.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
This commit adds Actions Semi OWL family UART support. This driver
relies on baudrate configured by primary bootloaders.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This commit enables UART5 found in S900 SoC for serial console support.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
This commit adds UART node for Actions Semi S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
This commit adds Actions Semi OWL family base clock and S900 SoC
specific clock support. For S900 peripheral clock support, only UART
clock has been added for now.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This commit adds Clock Management Unit (CMU) nodes for Actions Semi
S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
This commit adds Actions Semi S900 CMU register definitions to clock
bindings.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This commit adds uCRobotics Bubblegum-96 board support. This board is
one of the 96Boards Consumer Edition platform based on Actions Semi
S900 SoC.
Features:
- Actions Semi S900 SoC (4xCortex A53, Power VR G6230 GPU)
- 2GiB RAM
- 8GiB eMMC, uSD slot
- WiFi, Bluetooth and GPS module
- 2x Host, 1x Device USB port
- HDMI
- 20-pin low speed and 40-pin high speed expanders, 6 LED, 3 buttons
U-Boot will be loaded by ATF at EL2 execution level. Relevant driver
support will be added in further commits.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
This commit adds Actions Semi OWL SoC family support with S900 as the
first target SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
It is useful to write the position and size of each entry back to the
device tree so that U-Boot can access this at runtime. Add a feature to
support this, along with associated tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Once binman has packed the image, the position and size of each entry is
known. It is then possible for binman to update the device tree with these
positions. Since placeholder values have been added, this does not affect
the size of the device tree and therefore the packing does not need to be
performed again.
Add a new SetCalculatedProperties method to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Some entry types modify the device tree, e.g. to remove microcode or add a
property. So far this just modifies their local copy and does not affect
a 'shared' device tree.
Rather than doing this modification in the ObtainContents() method, and a
new ProcessFdt() method which is specifically designed to modify this
shared device tree.
Move the existing device-tree code over to use this method, reducing
ObtainContents() to the goal of just obtaining the contents without any
processing, even for device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present one of the stages is badly numbered and not described. Fix
this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a few simple functions to add a placeholder integer property, and
set its value.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present some warnings are printed to indicate failures which are a
known part of running the tests. Suppress these.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Now that we have 100% code coverage we can enable these tests in the test
script also.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add more tests to increase dtoc code coverage to 100%.
Correct a whitespace error in some test .dts files at the same time.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This function is useful in various tests. Move it into the common test
utility module.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a -T option to run a code-coverage test on dtoc. At present this is
about 96%. Future work will increase it to 100%.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Fix some comments and a printf string which is incorrect.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present a property with a single phandle looks like an integer value
to dtoc. Correct this by adjusting it in the phandle-processing code.
Add a test for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present the algortihm is not correct since it will return the root node
if the requested node is not found and there are no slashes in the
requested node name. Fix this and add a test.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present the Fdt class does not keep track of property offsets if they
change due to removal of properties. Update the code to handle this, and
add a test.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present only some of the fdt functionality is tested. Add more tests to
cover the rest of it. Also turn on test coverage, which is now 100% with
a small exclusion for a Python 3 feature.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present the Fdt class has its own copy of the device tree. This is
confusing an unnecessary now that pylibfdt has its own. Drop it and
provide access functions to the buffer.
This allows us to move the rest of the implementation to use pylibfdt
methods instead of directly calling libfdt stubs.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Now that pylibfdt supports a fuller API we don't need to directly call
the libfdt stubs. Update the code to use the Fdt methods instead.
Some other cases remain which will be tidied up in a later commit, since
they need larger changes.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
When a test fails due to an output mismatch (e.g. due to a new property
being adding to a test file) it is currently hard to update the test to
the new output. In particular the tabs in the file are written as \t in
the Python tests.
To make this easier, write both the expected and actual results to /tmp
to allow use of meld, and copying into the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present this module is tested via the dtoc tests. This is a bit painful
since the tests are at a higher level and so failures are more difficult
to diagnose.
Add some tests that exercise the fdt module directly.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present only binman has the logic for determining Python test coverage
but this is useful for other tools also. Move it out into a separate file
so it can be used by other tools.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add support for these functions in the Python binding. This patch stands
in for a pending upstream change.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This currently fails to reduce the device-tree bytearray size. Fix this.
This stands in for a pending upstream change.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This provides various patches sent to the devicetree-compiler mailing list
to enhance the Python bindings. A final version of this patch may be
created once upstreaming is complete, but if it takes too long, this can
act as a placeholder.
New pylibfdt features:
- Support for most remaining, relevant libfdt functions
- Support for sequential-write functions
Changes are applied to existing U-Boot tools as needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present the contents of an entry are set in subclasses simply by
assigning to the data and content_size properties. Add some methods to do
this, so that we have more control. In particular, add a method to set the
contents without changing its size, so we can validate that case.
Add a test case for trying to change the size when this is not allowed.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Move all the test execution into the same mechanism so that we can request
a particular test (from any suite) by passing it as an argument to
'binman -t'.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This method is supposed to return the contents of an entry. However at
present there is no check that it actually does. Also some implementations
do not return 'True' to indicate success, as required.
Add a check for things working as expected, and correct the
implementations.
This requires some additional test cases to cover things which were missed
originally. Add these at the same time.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
At present we call the three entries first, second and third. Rename them
to reflect their contents instead, for clarity.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This fake entry is used for testing. At present it only has one behaviour
which is to return an invalid set of entry positions, to cause an error.
The fake entry will need to be used for other things too. Allow the test
.dts file to specify the behaviour of the fake entry, so we can control
its behaviour easily.
While we are here, drop the ReadContents() method, since this only applies
to subclasses of Entry_blob, which Entry__testing is not.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The most portable way to get access to coverage is to invoke it as
'python-coverage'.
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add additional logging so that common errors when finding a device by
ofnode are easier to debug.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a way to decode a memory region, including the memory type (sram or
sdram) and its start address and size.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Update this function to take an ofnode so that it can work with livetree.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Update the parameters sandbox_sf_bind_emul to support livetree.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a new device_bind_ofnode() function which can bind a device given its
ofnode. This allows binding devices more easily with livetree nodes.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
It is sometimes useful to show a message when logging an error return
value, perhaps to add a few details about the problem. Add a function to
support this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add an ofnode_by_compatible() to allow iterating through ofnodes with a
given compatible string.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
These functions are missing comments. Add some.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Tidy up three return-value errors.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
We have a 32-bit version of this function. Add a 64-bit version as well so
we can easily read 64-bit ints from the device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Support a default memory bank, specified in reg, as well as
board-specific memory banks in subtree board-id nodes.
This allows memory information to be provided in the device tree,
rather than hard-coded in, which will make it simpler to handle
similar devices with different memory banks, as the board-id values
or masks can be used to match devices.
Signed-off-by: Michael Pratt <mpratt@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
