summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-19test: let use gdbserver for all sandbox targetsIgor Opaniuk
Enable usage of gdbserver for all sandbox targets (sandbox, sandbox_flattree etc.). Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-19bcm963158: use TARGET_BCM963158 instead of ARCH_BCM63158Philippe Reynes
We use TARGET_BCM63158 in the Kconfig instead of ARCH_BCM63158, so we could add other board that use a bcm63158. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-02-19dtbo: Fix dtbo generation rulesMichal Simek
Take the first prerequisite (dts overlay file) instead of standard input. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-19fs: fat: Reduce default max clustersize 64KiB from malloc poolTien Fong Chee
Release cluster block immediately when no longer use would help to reduce 64KiB memory allocated to the memory pool. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-02-19fs: fat: dynamically allocate memory for temporary bufferTien Fong Chee
Drop the statically allocated get_contents_vfatname_block and dynamically allocate a buffer only if required. This saves 64KiB of memory. Signed-off-by: Stefan Agner <stefan.ag...@toradex.com> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-02-19spl: implement CRC check on U-Boot uImageSimon Goldschmidt
SPL currently does not check uImage CRCs when loading U-Boot. This patch adds checking the uImage CRC when SPL loads U-Boot. It does this by reusing the existing config option SPL_CRC32_SUPPORT to allow leaving out the CRC check on boards where the additional code size or boot time is a problem (adding the CRC check currently adds ~1.4 kByte to flash). The SPL_CRC32_SUPPORT config option now gets enabled by default if SPL support for legacy images is enabled to check the CRC on all boards that don't actively take countermeasures. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-19configs: am57xx_evm: define CONFIG_SPL_LOAD_FIT_ADDRESS for SPL-DFUBin Liu
Define CONFIG_SPL_LOAD_FIT_ADDRESS to enable SPL-DFU for am57x platform. Signed-off-by: Bin Liu <b-liu@ti.com>
2019-02-19cmd: date: Do not overwrite argumentsRoman Kapl
Arguments are const and belong to the caller. Calling date in a hush loop will yield different results from the second invocation. Signed-off-by: Roman Kapl <rka@sysgo.com>
2019-02-19elf: fix cache flushing in 'bootelf -p' commandKurban Mallachiev
Currently there are two problems in 'bootelf -p' (load elf by segments) command: - bss section is not flushed, so booted elf can have non zero values in bss; - at least on ARM there are 'CACHE: Misaligned operation at range...' warnings Use p_memsz instead of p_filesz during cache flushing for elf segment. p_filesz doesn't include zero initialized memory (e.g. bss section), which also should be flushed. Align these cache flushes to line boundaries. Signed-off-by: Kurban Mallachiev <mallachiev@ispras.ru>
2019-02-19board/BuR/brxre1: convert do DMHannes Schmelzer
This commit converts the brxre1 board to DM, for this we have todo following things: - add a devicetree-file for this board - drop all obsolete settings from board header-file - use dm_i2c_xxx calls for read/write to the resetcontroller - request gpios before operate them Serues-cc: trini@konsulko.com Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-02-19dm: scsi: report correct device numberHeinrich Schuchardt
Before the patch scsi would report the same device number for all SCSI devices, e.g. Device 0: (1:0) Vendor: ATA Prod.: Crucial_CT128M55 Rev: MU01 Type: Hard Disk Capacity: 122104.3 MB = 119.2 GB (250069680 x 512) Device 0: (1:0) Vendor: ATA Prod.: Rev: Type: Hard Disk Capacity: not available With the patch the same device number is reported as is used in scsi_read(): Device 0: (1:0) Vendor: ATA Prod.: Crucial_CT128M55 Rev: MU01 Type: Hard Disk Capacity: 122104.3 MB = 119.2 GB (250069680 x 512) Device 1: (1:0) Vendor: ATA Prod.: Rev: Type: Hard Disk Capacity: not available Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-19tpm: simplify: tpm_set_global_lock()Heinrich Schuchardt
When in pack_byte_string() memcpy() is called for size 0 the source buffer address has no relevance. So we can use NULL here. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-19configs: ls1021a: enable sata configs for all ls1021a defconfigsPeng Ma
Add CONFIG_AHCI CONFIG_SATA_CEVA CONFIG_DM_SCSI for some ls1021a defconfigs that missing one of them or more. enable CONFIG_DM_MMC for some defconfigs to support CONFIG_BLK Support sata for all ls1021a defconfigs Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19configs: ls1012afrwy: enable sata configs for all ls1012afrwy defconfigsPeng Ma
Add CONFIG_AHCI CONFIG_SATA_CEVA CONFIG_DM_SCSI for some ls1012afrwy and ls1012afrwy defconfigs that missing one of them or more. Support sata for all ls1012afrwy defconfigs Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19configs: ls208xa: enable sata configs for all ls208xa defconfigsPeng Ma
Add CONFIG_AHCI CONFIG_SATA_CEVA CONFIG_DM_SCSI for some ls208xardb and ls208xaqds defconfigs that missing one of them or more. enable CONFIG_DM_MMC for some defconfigs to support CONFIG_BLK Support sata for all ls208xa defconfigs Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19configs: ls1088a: enable sata configs for all ls1088a defconfigsPeng Ma
Add CONFIG_AHCI CONFIG_SATA_CEVA CONFIG_DM_SCSI for some ls1088ardb and ls1088aqds defconfigs that missing one of them or more. Support sata for all ls1088a defconfigs Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19configs: ls1046a: enable sata configs for all ls1046a defconfigsPeng Ma
Add CONFIG_AHCI CONFIG_SATA_CEVA CONFIG_DM_SCSI for some ls1046ardb and ls1046aqds defconfigs that missing one of them or more. enable CONFIG_DM_MMC for some defconfigs to support CONFIG_BLK Support sata for all ls1046a defconfigs Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19configs: ls1043aqds: enable sata configs for all ls1043aqds defconfigsPeng Ma
Add CONFIG_AHCI CONFIG_SATA_CEVA CONFIG_DM_SCSI for some ls1043aqds defconfigs that missing one of them or more. Support sata for all ls1043aqds defconfigs Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8: ls1043a: move SCSI_AHCI and SCSI to arm/KconfigPeng Ma
remove SCSI and SCSI_AHCI configs for ls1043ardb due to no sata interface support. this changed is to fixed the ls1043ardb compile warning as fallows: ===================== WARNING ====================== This board does not use CONFIG_DM_SCSI. Please update the storage controller to use CONFIG_DM_SCSI before the v2019.07 release. Failure to update by the deadline may result in board removal.See doc/driver-model/MIGRATION.txt for more info. ==================================================== Signed-off-by: Peng Ma <peng.ma@nxp.com> [PK: reword the patch subject] Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8: layerscape: move CONFIG_LAYERSCAPE to KconfigRajesh Bhagat
Moves CONFIG_LAYERSCAPE for all NXP Layerscape platforms. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8: layerscape: move TZASC and TZPC configs to KconfigRajesh Bhagat
Moves FSL_TZASC_400 and FSL_TZPC_BP147 configs to Kconfig for LS1088A and LS2088A platforms. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19QE: ls1043a: modify CONFIG_SYS_QE_FW_ADDR to (512*4A00) in SD CardZhao Qiang
Due to the new layout of Layerscape series, move the QE firmware to address (512*4A00) in SD Card. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8: ls1043ardb: Add the nand_bootcmd definitionWen He
nand_bootcmd doest not exist, it should be support for nand auto boot up. Signed-off-by: Wen He <wen.he_1@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19lx2160aqds : Add support for LX2160AQDS platformPankaj Bansal
LX2160AQDS is a development board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> [PK: Sqaush patch for "secure boot defconfig" & add maintainer] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19board/lx2160a: Add init_func_vid() definitionPriyanka Jain
Add init_func_vid() which calls adjust_vdd() This ensures adjust_vdd() is called via init_sequence_f[] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8: lx2160: Add secure boot target and enable distro boot.Udit Agarwal
Adds esbc validate command for verification of MC and DPC firmware, along with secure boot defconfig. Also enable distro boot. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Peng Ma <peng.ma@nxp.com> [PK: squash "enable DM support for SATA patch" & add maintainer] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19board/lx2160ardb: Add distro boot supportPriyanka Jain
Add u-boot enviroments to support distro boot which scan boot.scr from external storage devices (e.g. SD/USB/SCSI disk) and execute autoboot script Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19lx2160: Enable support of EMC2305Meenakshi Aggarwal
Enable support for FAN controller EMC2305 for LX2160A RDB board. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> [PK: enable EMC2305 for lx2160rdb] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8: emc2305: add support for fan controllerMeenakshi Aggarwal
Add support for fan controller emc2305. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8: lx2160ardb : Add support for LX2160ARDB platformPriyanka Jain
LX2160ARDB is an evaluation board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> [PK: Sqaush patches from Yinbo Zhu, Peng Ma, Chuanhua Han and re-arrange defconfig] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8: fsl-layerscape: reorder rgmii dpmacs' enablementPankaj Bansal
some dpmacs in armv8a based freescale layerscape SOCs can be configured via both serdes(sgmii, xfi, xlaui etc) bits and via EC*_PMUX(rgmii) bits in RCW. e.g. dpmac 17 and 18 in LX2160A can be configured as SGMII from serdes bits and as RGMII via EC1_PMUX/EC2_PMUX bits Now if a dpmac is enabled by serdes bits then it takes precedence over EC*_PMUX bits. i.e. in LX2160A if we select serdes protocol that configures dpmac17 as SGMII and set the EC1_PMUX as RGMII, then the dpmac is SGMII and not RGMII. Therefore, move the fsl_rgmii_init after fsl_serdes_init. in fsl_rgmii_init function of SOC, we will check if the dpmac is enabled or not? if it is (fsl_serdes_init has already enabled the dpmac), then don't enable it. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8, lx2160a: Initialize ethernet array in serdes_initPriyanka Jain
Add code to initial ethernet interface arrays with corresponding dpmac-id values in serdes_init function for LX2160A. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19drivers/ddr/fsl: Update fsl_ddr_board_options as weak functionPriyanka Jain
fsl_ddr_board_options is generally defined in board board's ddr.c, but some boards like lx2160ardb board does not need this function. Defining fsl_ddr_board_options as weak function to resolve compilation errors for such boards. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> [PK: Fix checkpatch warnings] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19arch: arm: lib: Flush L3 after relocation to DDRMeenakshi Aggarwal
Flush L3 cache after uboot relocated to DDR. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Udit Kumar <udit.kumar@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8: lx2160a: Update CONFIG_SYS_FSL_PEBUF_BASEPriyanka Jain
As per hardware documentation, CONFIG_SYS_FSL_PEBUF_BASE for lx2160a is 0x1c00000000 Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-18Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- Misc Gen5 fixes - stratix10 bugfix - dwmmc bugfix
2019-02-18Prepare v2019.04-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-02-18configs: Enable CONFIG_BLK in am57xx_evm and am57xx_hs_evmJean-Jacques Hiblot
Enable CONFIG_DM_SCSI and CONFIG_BLK. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-02-18configs: k2g_evm: Enable CONFIG_BLKJean-Jacques Hiblot
CONFIG_BLK can be safely enabled as DM_MMC and DM_USB are already enabled. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Vignesh R <vigneshr@ti.com>
2019-02-18efi_loader: Swap roles with HeinrichAlexander Graf
Heinrich is going to take over maintainership of the efi_loader tree going forward. To ensure that I will still receive review mails at least, add me as reviewer with a stable email address. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-18rpi: Make Matthias maintainerAlexander Graf
Matthias Brugger agreed to take over maintainership from me for the Raspberry Pi tree. Add him to the MAINTAINERS file instead. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-18board/BuR/brppt1: fix ethernet support on brppt1 boardsHannes Schmelzer
The commit 1bac199e8c87 ("configs: Resync with savedefconfig") did remove ethernet driver from following boards defconfig: - brppt1_mmc - brppt1_nand - brppt1_spi With this commit we add ethernet and responsible phy support again. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-02-18Merge tag 'efi-2019-04-rc2' of https://github.com/xypron2/u-bootTom Rini
The patches fix multiple errors. Mentionable are: - EFI unit tests (bootefi selftest) can run on i386. - `make tests` executes the Unicode unit tests. The LoadImage patch is preparing for further rework to be delivered in v2019.07.
2019-02-18ARM: socfpga: stratix10: Return valid error code from FPGA driverAng, Chee Hong
This patch prevent the Stratix 10 FPGA driver incorrectly return the transaction ID as the mailbox error code. It should always return the actual mailbox error code from SDM firmware. Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2019-02-18mmc: dwmmc: Poll for iDMAC TX/RX interruptLey Foon Tan
Poll for iDMAC TX/RX interrupt before disable DMA. This to prevent disable DMA before data is transfer completed. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-02-18arm: socfpga: gen5: remove hacked ETH RST handlingSimon Goldschmidt
The 'dwmac_socfpga' ETH driver can now get the MACs out of reset via the socfpga reset driver and can set PHY mode via syscon. This means we can now remove the ad-hoc code to do this from arch/arm/mach-socfpga. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-02-18arm: socfpga: gen5 enable designware_socfpgaSimon Goldschmidt
Enable the socfpga specific designware ethernet driver by default for socfpga by implying it when enabling CONFIG_ETH_DESIGNWARE for a MACH_SOCFPGA config. This is required to remove the hacky reset and phy mode handling in arch/arm/mach-socfpga. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-02-18net: designware: socfpga: adapt to Gen5Simon Goldschmidt
This driver was written for Arria10, but it applies to Gen5, too. The main difference is that Gen5 has 2 MACs (Arria10 has 3) and the syscon bits are encoded in the same register, thus an offset is needed. This offset is already read from the devicetree, but for Arria10 it is always 0, which is probably why it has been ignored. By using this offset when writing the phy mode into the syscon regiter, we can use this driver to set the phy mode for both of the MACs on Gen5. Since the PHY mode bits in sysmgr are the same even for Stratix10, let's drop the detection of the sub-mach by checking compatible version and just use the same code for all FPGAs. To work correctly, this driver depends on SYSCON and REGMAP, so select those via Kconfig when it is enabeld. Tested on socfpga_socrates (where the 2nd MAC is connected, so a shift offset is required). Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-02-16Merge tag 'video-for-2019.04-rc2' of git://git.denx.de/u-boot-videoTom Rini
- sunxi display DDC probe fallback - support 24bpp BMP files on 16bpp displays
2019-02-16Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Various MMC fixes
generated by cgit (git 2.34.1) at 2025-01-09 22:09:59 +0000