summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-19mailbox: add Tegra186 HSP driverStephen Warren
Tegra186's HSP module implements doorbells, mailboxes, semaphores, and shared interrupts. This patch provides a driver for HSP, and hooks it into the mailbox API. Currently, only doorbells are supported. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19mailbox: rename headersStephen Warren
Rename mailbox*.h to match the naming convention requested during review of the new reset subsystem. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19sandbox: gpio: doc: Fix parameter documentationmario.six@gdsys.cc
The documentation of parameters in arch/sandbox/include/asm/gpio.h is either missing or faulty. This patch corrects the documentation. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19lib/libfdt/: General aesthetic/style fixes.Robert P. J. Day
A number of style fixes across the files in this directory, including: * Correct invalid kernel-doc content. * Tidy up massive comment in fdt_region.c. * Use correct spelling of "U-Boot". * Replace tests of "! <var>" with "!<var>". * Replace "libfdt_env.h" with <libfdt_env.h>. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19gpio: pca953x: Fix register reading past 8th GPIOmario.six@gdsys.cc
A bug in the pca953x driver prevents correct reading of GPIO input values beyond the 8th GPIO; all values are reported as zero. Setting of GPIO output values is not affected. This patch fixes the reading behavior. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Peng Fan <van.freenix@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19dm: add manual relocation for devicesAngelo Dureghello
Some architectures as m68k still need to use CONFIG_NEEDS_MANUAL_RELOC, and are not still using the device tree. Signed-off-by: Angelo Dureghello <angelo@sysam.it> Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19SPL ext: cosmetic: correct error message in spl_load_image_ext()Petr Kulhavy
Correct the error message in spl_load_image_ext() when image parsing fails. Instead of "ext4fs_read failed" print "failed to parse image header". Signed-off-by: Petr Kulhavy <brain@jikos.cz> CC: Guillaume GARDET <guillaume.gardet@free.fr> CC: Tom Rini <trini@konsulko.com>
2016-06-19fs: cbfs: Fix build of fs/cbfs/cbfs.c when building u-boot sandbox on x86 32-bitGuillaume GARDET
Fix the following build errors when building sandbox on x86 32-bit: In file included from fs/cbfs/cbfs.c:8:0: include/malloc.h:364:7: error: conflicting types for 'memset' void* memset(void*, int, size_t); ^ In file included from include/compiler.h:123:0, from include/cbfs.h:10, from fs/cbfs/cbfs.c:7: include/linux/string.h:78:15: note: previous declaration of 'memset' was here extern void * memset(void *,int,__kernel_size_t); ^ In file included from fs/cbfs/cbfs.c:8:0: include/malloc.h:365:7: error: conflicting types for 'memcpy' void* memcpy(void*, const void*, size_t); ^ In file included from include/compiler.h:123:0, from include/cbfs.h:10, from fs/cbfs/cbfs.c:7: include/linux/string.h:81:15: note: previous declaration of 'memcpy' was here extern void * memcpy(void *,const void *,__kernel_size_t); ^ scripts/Makefile.build:280: recipe for target 'fs/cbfs/cbfs.o' failed Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-19test/py: fix printenv signon message disable codeStephen Warren
CONFIG_VERSION_VARIABLE isn't always defined, so we can't simply look up its value directly, or an exception will occur if it isn't defined. Instead, we must use .get() to supply a default value if the variable isn't defined. Fixes: da37f006e7c5 ("tests: py: disable main_signon check for printenv cmd") Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-06-18Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2016-06-18Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
2016-06-18Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2016-06-18warp7: Fix DFU supportFabio Estevam
Currently DFU is not working. Adjust CONFIG_SYS_MALLOC_LEN and dfu_alt_info so that we are able to flash u-boot.imx into the eMMC via dfu using the following method: => dfu 0 mmc 0 In the host PC: dfu-util -D u-boot.imx -a boot This is the same approach done in the mx6sl warp board. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18warp7: Add README fileMarco Franchi
Add a README file for helping users to install U-Boot into the eMMC. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18warp7: Fix watchdog resetMarco Franchi
The latest version of warp7 board provides the connection of the WDOG1_B pin to the PMIC. Program the watchdog to enable the WDOG1_B output which causes a POR reset. Based on the imx7dsabresd code. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18imx: mx6ulevk: change QSPI PAD DSE to 120ohmPeng Fan
The current pad DSE for QSPI is 60ohm. This setting cause too strong drive to clock and data signals. Need to change the DSE to 120ohm for better signal quality. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18imx6ulevk: fix LCD_nPWREN settingPeng Fan
Q901 is PMOS, LCD_nPWREN should be at low voltage then output is 3V3. If LCD_nPWREN is high, output is 2.4V which is not correct. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18imx6ulevk: fix 74LV OE usagePeng Fan
Fix 74LV OE gpio index. gpio index is wrong, so gpio output will not have effect, since we use wrong GPIO5_IO18, but not correct GPIO5_IO8. And at the end of the initialization of 74lv init, should keep OE voltage level at LOW to make 74lv output the correct voltage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18mx7dsabresd: Fix LCD_PWR_EN output settingYe Li
LCD_PWR_EN controls the G pin of Q13 PMOS which needs low voltage to connect D to S for outputting LCD 3.3V. If LCD_PWR_EN is high, we measured the LCD 3v3 is actually 1.2V. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18mx6sabresd: Allow LVDS backlight to be functional after a kernel rebootMarco Franchi
Currently the LVDS backlight does not work in U-Boot after a “reboot” comand in the kernel. This problem occurs because the kernel uses this pin in PWM mode and U-Boot does not configure the backlight pin as GPIO functionality. So fix the problem by explicitly configuring the backlight pin as GPIO in U-Boot. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Stefano Babic <sbabic@denx.de> Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2016-06-18usb: ehci: only shutdown opened controllerPeng Fan
If the usb controller is not running, no need to shutdown it, otherwise `usb stop` complains about: "EHCI failed to shut down host controller". To i.MX7D SDB, there are two usb ports, one Host, one OTG. If we only plug one udisk to the Host port and then `usb start`, the OTG controller for OTG port does not run actually. Then, if `usb stop`, the OTG controller for OTG port will also be shutdown, but it is not running. This patch adds a check to only shutdown the running controller. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: "Stefan Brüns" <stefan.bruens@rwth-aachen.de> Cc: Stephen Warren <swarren@nvidia.com>
2016-06-18cmd: usb: check if_type before using this devicePeng Fan
For legacy usb storage driver, USB_MAX_STOR_DEV is defined as 7. If we only have one usb disk on board, `usb dev 0` is ok. But if `usb dev 1`, still ok, then `usb read xxx` will trigger system fault and reboot. So check if_type before using this device. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stephen Warren <swarren@nvidia.com>
2016-06-17arm: Fix setjmpAlexander Graf
The setjmp/longjmp implementation did not work on thumb1 implementations because it used instruction encodings that don't exist on thumb1 yet. This patch limits itself to thumb1 instruction set for 32bit arm and removes a superfluous printf along the way. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-06-17arm, am335x: siemens: enable DM/DTS supportHeiko Schocher
enable basic DM/DTS support for the siemens am335x based boards. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-17arm, am335x: siemens: update etamin defconfigHeiko Schocher
add missing USB_MUSB_* and CONFIG_G_DNL_* board configuration. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-17ARM: AM57xx: Enable FIT for HS DevicesAndreas Dannenberg
Enable FIT support for AM57xx platforms using the high-security (HS) device variant. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-17OMAP3: fix twister boardStefano Babic
twister board was not updated after changing SPL defines, resulting in a broken board. Signed-off-by: Stefano Babic <sbabic@denx.de>
2016-06-17Orphan dbau1x00 boardsThomas Lange
I no longer have access to such a board Signed-off-by: Thomas Lange <thomas@corelatus.se>
2016-06-17SPL: ext: remove redundant ifdef statementPetr Kulhavy
Remove redundant #if defined(CONFIG_SPL_OS_BOOT) statement around getenv() calls in spl_load_image_ext_os(). The whole function is surrounded by #ifdef CONFIG_SPL_OS_BOOT. No functional change. Signed-off-by: Petr Kulhavy <brain@jikos.cz> CC: Guillaume GARDET <guillaume.gardet@free.fr> Acked-by: Guillaume GARDET <guillaume.gardet@free.fr>
2016-06-17common: image-fit: Cleanup spelling mistakesAndreas Dannenberg
The comments in the source file are riddled with spelling mistakes. Be a good citizen and take a stab at cleaning up some of the more obvious ones. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-17ARM: AM437x: Enable FIT for hs platformsSrinivas, Madan
Adds FIT support to the SPL and u-boot for AM437x HS devices. Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-17ARM: AM437x: Sync defconfig between GP and HS EVMSrinivas, Madan
Adds missing NAND option to CONFIG_SYS_EXTRA_OPTIONS for AM437x HS EVMs. This syncs up the config options between GP and HS EVMs. Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-17configs: Re-sync BOOTDELAY changesTom Rini
With updated moveconfig.py and an better default, re-generate the migration of BOOTDELAY to the defconfig. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-17common/Kconfig: Change the default BOOTDELAY to 2Tom Rini
The value of 0 is fairly uncommon while 2 is one of the more common ones so switch. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-17Merge branch 'master' of git://git.denx.de/u-boot-ubiTom Rini
2016-06-14splash_source: add support for ubifs formatted nandEran Matityahu
Add support for loading splash image from NAND Flash formatted with a (UBI) filesystem. Signed-off-by: Eran Matityahu <eran.m@variscite.com> Cc: Heiko Schocher <hs@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
2016-06-13usb: xhci: fsl: Add workaround for USB erratum A008751Sriram Dash
This patch is doing the following: 1. Implementing the errata for LS2080. 2. Adding fixup for fdt for LS2080. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2016-06-13armv8/ls2080: Remove workaround for erratum A008751Sriram Dash
This errata a008751 is applied on Soc specific file currently.This will be moved to a file where all the errata implementation will take place for usb for fsl. This patch removes the errata workaround from soc specific file for LS2080. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2016-06-13fsl: usb: make errata function common for PPC and ARMSriram Dash
This patch does the following things: 1. Makes the errata checking code common for PPC and ARM 2. Moves all these static inline functions into a dedicated C file Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2016-06-13usb: xhci: fsl: code cleanup for device tree fixup for fsl usb controllersSriram Dash
Performs code cleanup for device tree fixup for fsl usb controllers by making functions to handle these similar errata checking code. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
2016-06-13arm64: fsl-layerscape: add get_svr and IS_SVR_REV helperSriram Dash
Adds get_svr and IS_SVR_REV helpers for ARMv8 platforms, similar to PPC and ARMv7. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2016-06-13arm: bcm281xx: choose 8-bit phy bus widthSteve Rae
The Kona PHY supports an 8-bit wide UTMI interface, therefore, choose this Kconfig setting. Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-13usb: dwc2_udc_otg: support 8-bit interfaceSteve Rae
Define CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8 to allow the physical interface to be 8-bit (rather than 16-bit). Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-13board: am437x-hs: spl: Select right dtb from fitLokesh Vutla
Select a right dtb from FIT for am437x-hs platform. Reported-by: Madan Srinivas <madans@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-13ti_omap5_common: Add right dtb file for AM572x-IDKLokesh Vutla
Add proper dtb file name for AM572x-IDK in env. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-13ARM: dts: AM572x-IDK Initial SupportSchuyler Patton
Add initial DTS support for AM572-IDK evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-13ARM: AM57xx: Enable FITLokesh Vutla
Enable FIT support for AM57xx platforms Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-13board: am57xx: fit: add support for selecting dtb dynamicallyLokesh Vutla
FIT allows for a multiple dtb in a single image. SPL needs away to detect the right dtb to be used. Adding support for the same for am57xx platforms. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-13board: am57xx: Rename TARGET_BEAGLE_X15 as TARGET_AM57XX_EVMLokesh Vutla
board/am57xx supports all boards based on am57xx. Rename the taget as TARGET_AM57XX_EVM. Fixes: 74cc8b097d9af ("board: ti: beagle_x15: Rename to indicate support for TI am57xx evms") Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
generated by cgit (git 2.34.1) at 2024-12-26 12:07:34 +0000