summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-13clk: clk_stm32f: Rework SDMMC stm32_clk_get_rate() partPatrice Chotard
Rework the way SDMMC clock get rate is done in a more generic way : _ Add stm32_clk_get_pllsai_rate() which give the PLLSAI indicated output rate. _ Add stm32_clk_get_pllsai_vco_rate() which give the VCO internal rate. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32f: No more need of 48Mhz from PLL_SAIPatrice Chotard
Initially, 48Mhz for SDIO clock was generated from SAI pll for STM32F469 and STM32F746 SoCs, but this solution was not suitable for STM32F429 SoCs. A generic solution is to used the PLL_Q output as 48Mhz clock for all STM32F SOCs family. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32f: Fix RCC_PLLSAICFGR mask definesPatrice Chotard
Use the correct name for RCC_PLLSAICFGR_PLLSAIx_MASK masks. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32f: Fix stm32_clk_get_rate()Patrice Chotard
Wrong parameter was passed to stm32_clk_pll48clk_rate(). sysclk (PLL_p output value) was passed instead of VCO value. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13mmc: stm32: sdmmc2: add support for st, pin-ckinsdmmc_ckinPatrick Delaunay
This patch adds "st,pin-ckin" support to activate sdmmc_ckin feature. When using an external driver (a voltage switch transceiver), it's advised to select SDMMC_CKIN feedback clock input to sample the received data. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13mmc: stm32: sdmmc2: add hardware flow control supportPatrick Delaunay
The hardware flow control functionality is used to avoid FIFO underrun (TX mode) and overrun (RX mode) errors. The behavior is to stop SDMMC_CK during data transfer and freeze the SDMMC state machines. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13board: stm32: switch to DM STM32 timerPatrice Chotard
Use available DM stm32_timer driver instead of dedicated mach-stm32/stm32fx/timer.c. Remove all defines or files previously used for timer usage in arch/arm/include/asm/arch-stm32fx and in arch/arm/mach-stm32/stm32fx Enable DM STM32_TIMER for STM32F4/F7 and H7. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13ARM: dts: stm32: Add timer support for STM32F7Patrice Chotard
Add missing timer node to enable timer5 for STM32F7 SoCs family Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32h7: Fix prescaler for Domain 3Patrice Chotard
d1cfgr register was used to calculate the domain 3 prescaler value instead of d3cfgr. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32h7: Fix stm32_clk_get_rate() for timerPatrice Chotard
For timer clock, an additional prescaler is used which was not taken into account previously. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13clk: clk_stm32f: Fix stm32_clk_get_rate() for timerPatrice Chotard
For timer clock, an additionnal prescaler is used which was not taken into account previously. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13timer: stm32: Add timer support for STM32 SoCs familyPatrice Chotard
This timer driver is using GPT Timer (General Purpose Timer) available on all STM32 SOCs family. This driver can be used on STM32F4/F7 and H7 SoCs family Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13Merge git://git.denx.de/u-boot-rockchipTom Rini
2018-03-13Merge branch 'next' of git://git.denx.de/u-boot-videoTom Rini
2018-03-13rk3288: vyasa: Add eMMC boot supportJagan Teki
RK3288 Vyasa has eMMC boot support, with JP4 open. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Add usb otg for rk3288-vyasaJagan Teki
Add usb otg support for rk3288-vyasa, board support usb1 otg power through otg_vbus_drv and naming conversion followed as per schematic. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Add usb host for rk3288-vyasaJagan Teki
Add usb host support for rk3288-vyasa, board support hub power through phy_pwr_en and usb2 host power through usb2_pwr_en and naming conversion followed as per schematic. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: rk3288-vyasa: defconfig: Enable gmac supportJagan Teki
Enable gmac support for rk3288-vyasa board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Add gmac support for rk3288-vyasa boardJagan Teki
Sync gmac dts node from Linux. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Add regulators for rk3288-vyasaJagan Teki
Add supporting regulators for rk3288-vyasa board, dc12_vbat is parent regulatorand followed regulators as are child regulators. regulator naming conversion followed as per schematic for better readability and easy for identification. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMICJagan Teki
rk808, SWITCH_REG1 has configured for sdmmc regulator as vcc_sd, so use the same by renaming vcc33_sd to vcc_sd(as per schematic) and drop explicit regulator definition from root. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1Jagan Teki
vdd_log, never used on DCDC_REG1 of rk808 from latest schematic so remove the same and update the regulator-name as 'vdd_arm' to sync with existing rk3288 board dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Sync rk3288-vyasa dts from LinuxJagan Teki
Sync rk3288-vyasa board dts from Linux for proper updates and maintenance - rk3288-vyasa.dts: Similar to Linux dts - rk3288-vyasa-u-boot.dtsi: u-boot dts changes Also updated MAINTAINERS for these dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: add text_offset to kernel_addr_r on aarch64 platformsKlaus Goger
Booting a aarch64 Linux kernel requires the image to be placed text_offset bytes from a 2MB aligned address. See https://www.kernel.org/doc/Documentation/arm64/booting.txt booti_setup() takes care about this alignment and will relocate the image if not properly aligned with memmove(). This can require up to double the size of the loaded image and therefore accidentally overwrite content placed there (i.e ramdisk_addr_r) for large kernel images. By adding text_offset to the default kernel_addr_r we can prevent that from happening for kernels larger 18MB and also save a few cycles. We can assume a text_offset of 0x80000 for most cases, all others will be handled by booti_setup() anyway. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: pwm: convert to use live dtKever Yang
use live dt api to get base addr Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk1108: convert to use live dtKever Yang
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk3328: convert to use live dtKever Yang
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk3288: convert to use live dtKever Yang
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk322x: convert to use live dtKever Yang
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk3188: convert to use live dtKever Yang
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13rockchip: clk: rk3036: convert to use live dtKever Yang
Use live dt api to get cru base addr. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13Prepare v2018.03Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-13imx: hab: Convert DCD non-NULL error to warningBryan O'Donoghue
commit 8c4037a09a5c ("imx: hab: Ensure the IVT DCD pointer is Null prior to calling HAB authenticate function.") makes the DCD field being NULL a dependency. This change though will break loading and executing of existing pre-signed binaries on a u-boot update i.e. if this change is deployed on a board you will be forced to redo all images on that board to NULL out the DCD. There is no prior guidance from NXP that the DCD must be NULL similarly public guidance on usage of the HAB doesn't call out this NULL dependency (see boundary devices link). Since later SoCs will reject a non-NULL DCD there's no reason to make a NULL DCD a requirement, however if there is an actual dependency for later SoCs the appropriate fix would be to do SoC version checking. Earlier SoCs are capable (and happy) to authenticate images with non-NULL DCDs, we should not be forcing this change on downstream users - particularly if it means those users now must rewrite their build systems and/or redeploy signed images in the field. Fixes: 8c4037a09a5c ("imx: hab: Ensure the IVT DCD pointer is Null prior to calling HAB authenticate function.") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Utkarsh Gupta <utkarsh.gupta@nxp.com> Cc: Breno Lima <breno.lima@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Link: https://boundarydevices.com/high-assurance-boot-hab-dummies Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-03-11doc: mxc_hab: Update i.MX HAB documentationBreno Lima
The README.mxc_hab is outdated and need improvements, add the following modifications: - Reorganize document and remove duplicate content - Add CST download link - Update CST package name - Align command lines with CST v2.3.3 - Update U-Boot binary name - Remove CSF padding since is not documented in AN4581 Signed-off-by: Breno Lima <breno.lima@nxp.com>
2018-03-11doc: mxc_hab: Move HAB related info to the appropriate docBreno Lima
Currently the High Assurance Boot procedure is documented in two places: - doc/README.imx6 - doc/README.mxc_hab It is better to consolidate all HAB related information into README.mxc_hab file, so move the content from README.imx6 to README.mxc_hab. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-03-11imx: hab: Make usage of packed attribute consistentBryan O'Donoghue
commit cd2d46003ce1 ("arm: imx: hab: Add IVT header definitions") declares struct ivt_header as "__attribute__((packed))". commit ed286bc80e9d ("imx: hab: Check if CSF is valid before authenticating image") declares struct hab_hdr with __packed. This patch makes the __packed convention consistent. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Utkarsh Gupta <utkarsh.gupta@nxp.com> Cc: Breno Lima <breno.lima@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-03-11imx: hab: Fix usage of packed attributeBryan O'Donoghue
commit ed286bc80e9d ("imx: hab: Check if CSF is valid before authenticating image") makes use of "__packed" as a prefix to the "struct hab_hdr" declaration. With my compiler "gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)" we get: ./arch/arm/include/asm/mach-imx/hab.h:42:25: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token struct __packed hab_hdr { Fix this problem by including <linux/compiler.h> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Utkarsh Gupta <utkarsh.gupta@nxp.com> Cc: Breno Lima <breno.lima@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-03-11ARM: dts: imx6dl-icore-rqs: Fix to include correct dtsiJagan Teki
This patch fixes the wrongly included dtsi file which was breaking mainline support for Engicam i.CoreM6 DualLite/Solo RQS. Linux commit details for the same change as "ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS" (sha1: c0c6bb2322964bd264b4ddedaa5776f40c709f0c) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-03-11ARM: dts: imx6qdl-icore-rqs: Sync usdhc4 node from LinuxJagan Teki
usdhc4 node need to update pinctrl, bus-width and non-removable properties, sync the same from Linux. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-03-09Merge git://git.denx.de/u-boot-imxTom Rini
2018-03-09configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-09tools/mkimage: Use proper output parameter in dtc-system callStefan Theil
The system call used by mkimage to run dtc redirects stdout to a temporary file. This can cause problems on Windows (with a MinGW cross-compiled version). Using the "-o" dtc parameter avoids this problem. Signed-off-by: Stefan Theil <stefan.theil@mixed-mode.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-03-09fs: ext4: Do not print mount fail message when not ext4 filesystemMarek Behún
Other filesystem drivers don't do this. Signed-off-by: Marek Behun <marek.behun@nic.cz>
2018-03-09MAINTAINERS: bring sections into alphabetic orderHeinrich Schuchardt
NETWORK should be after NAND_FLASH. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-09scripts/coccinelle: add some more coccinelle testsHeinrich Schuchardt
kmerr: verify that malloc and calloc are followed by a check to verify that we are not out of memory. badzero: Compare pointer-typed values to NULL rather than 0 Both checks are copied from the Linux kernel archive. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-09yaffs2: iterator variable cannot be NULLHeinrich Schuchardt
The iterator of list_for_each() is never NULL. Identified with coccinelle. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-09bcm283x_pl011: Flush RX queue after setting baud rateAlexander Graf
After the UART was initialized, we may still have bogus data in the RX queue if it was enabled with incorrect pin muxing before. So let's flush the RX queue whenever we initialize baud rates. This fixes a regression with the dynamic pinmuxing code when enable_uart=1 is not set in config.txt on Raspberry Pis that use pl011 for serial. Fixes: caf2233b28 ("bcm283x: Add pinctrl driver") Reported-by: Göran Lundberg <goran@lundberg.email> Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-03-09serial_bcm283x_mu: Flush RX queue after setting baud rateAlexander Graf
After the UART was initialized, we may still have bogus data in the RX queue if it was enabled with incorrect pin muxing before. So let's flush the RX queue whenever we initialize baud rates. This fixes a regression with the dynamic pinmuxing code when enable_uart=1 is not set in config.txt. Fixes: caf2233b28 ("bcm283x: Add pinctrl driver") Reported-by: Göran Lundberg <goran@lundberg.email> Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-03-09sunxi: video: mark framebuffer as EFI reserved memoryHeinrich Schuchardt
Inform the EFI subsystem that the framebuffer memory is reserved. Without the patch the AllocatePool boot service allocates memory from the framebuffer which will will be overwritten by screen output. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-09ARM: Drop unreferenced CONFIG_* defines named after boardsTuomas Tynkkynen
The following config symbols are only defined once and never referenced anywhere else: CONFIG_AT91SAM9263EK CONFIG_AT91SAM9RLEK CONFIG_BARIX_IPAM390 CONFIG_BOARD_H2200 CONFIG_EP9301 CONFIG_KZM_A9_GT CONFIG_PICOSAM CONFIG_PLATINUM_PICON CONFIG_PLATINUM_TITANIUM CONFIG_PM9261 CONFIG_PM9263 CONFIG_PM9G45 CONFIG_SIEMENS_DRACO CONFIG_SIEMENS_PXM2 CONFIG_SIEMENS_RUT CONFIG_SMDKC100 CONFIG_SMDKV310 CONFIG_STM32F4DISCOVERY Most of them are config symbols named after the respective boards which seems to have been a standard practice at some point. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
generated by cgit (git 2.34.1) at 2024-12-26 13:05:01 +0000