summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-09imx8qxp_mek: Fix the console command line stringFabio Estevam
Currently the expansion of the console variable leads to the following kernel command line: console=ttyLP0,${baudrate} earlycon root=/dev/mmcblk1p2 rootwait rw , which causes the console to not show characters after the LPUART driver is probed as the 'baudrate' variable is not properly translated. Fix it by splitting the console variable in two parts: one for the ttyLP0 part and the other one for the baudrate, which matches the way it is done on other i.MX targets. Tested by successfully booting a mainline kernel on a i.MX8QXP MEK board. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-03-09imx: remove woodburn boardStefano Babic
Board is not longer used, remove it. Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-03-09imx6, aristainetos2c: add da9063 pmic setupHeiko Schocher
On the aristainetos2c boards the PMIC needs to be initialized, because the Ethernet PHY uses a different regulator that is not setup per hardware default. This does not influence the other versions as this regulator isn't used there at all. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-03-05Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Revert "x86: use invd instead of wbinvd in real mode start code" - Convert toradex boards README to reST - serial: ns16550: Move PCI access from ofdata_to_platdata() to probe() - x86: apl: Use cpu_x86_get_count() for cpu_ops.get_count
2020-03-05x86: apl: Use cpu_x86_get_count() for cpu_ops.get_countWolfgang Wallner
Use cpu_x86_get_count() to read the number of cores. cpu_x86_get_count() reads the number of CPUs from the device tree. Using this function we can support multiple Apollo Lake variants, e.g.: E3940 (4 cores) and E3930 (2 cores). This was tested on the E3940 and E3930 Apollo Lake variants. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05x86: cpu_x86: Make cpu_x86_get_count() non-staticWolfgang Wallner
The function cpu_x86_get_count() is also useful for other modules. Make it non-static and add a prototype + description. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05doc: Chromebook Coral: Fix typo for "Top of CAR region"Wolfgang Wallner
The value for "Top of CAR region" should be fefc0000, not fefc000. This matches the Kconfig default values, as SYS_CAR_ADDR and SYS_CAR_SIZE are 0xfef00000 and 0xc0000 respectively. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05x86: p2sb: Drop 'apl' prefixWolfgang Wallner
Drop the Apollo Lake prefix 'apl' from the functions, types and variables in the P2SB driver. The P2SB is not Apollo Lake specific, and as such it was moved in commit 2999846c1127 ("x86: Move P2SB from Apollo Lake to a more generic location") from the Apollo Lake folder to the intel_common folder. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05serial: ns16550: Move PCI access from ofdata_to_platdata() to probe()Wolfgang Wallner
Currently the ofdata_to_platdata() method calls dev_read_addr_pci(), which potentially accesses the parent PCI bus. If this happens before the parent PCI bus is probed the resulting address will be wrong. This behavior was triggered by commit 82de42fa1468 ("dm: core: Allocate parent data separate from probing parent"). According to a comment in drivers/pci/pci-uclass.c [1] accessing the PCI parent bus in ofdata_to_platdata() is not allowed, and the access should be moved to the probe() function. Move the call to dev_read_addr_pci() and the related handling of the 'addr' value from the ofdata_to_platdata() to its own function, which is then called from the probe() method. While moving the code, the comment /* try Processor Local Bus device first */ was dropped. It was initially added with commit 3db886a5bf38 ("serial: ns16550: Support ns16550 compatible pci uart devices") and later made obsolete with commit 33c215af4b9d ("dm: pci: Add a function to read a PCI BAR"). [1] Comment in drivers/pci/pci-uclass.c: "A common cause of this problem is that this function is called in the ofdata_to_platdata() method of @dev. Accessing the PCI bus in that method is not allowed, since it has not yet been probed. To fix this, move that access to the probe() method of @dev instead." Fixes: 82de42fa1468 ("dm: core: Allocate parent data separate from probing parent") Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> # Tested on Intel Galileo
2020-03-05Revert "x86: use invd instead of wbinvd in real mode start code"Andy Shevchenko
This reverts commit 0d67fac29f3187e67f4fd3ef15f73e91be2fad12. As real hardware testing (*) shows the above mentioned commit breaks U-Boot on it. Revert for the upcoming release. We may get more information in the future and optimize the code accordingly. (*) on Intel Edison board. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fix a typo in the commit message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05x86: remove dead code in intel_clk_get_rate()Heinrich Schuchardt
If all branches of a switch statement have a return instruction, all subsequent lines are unreachable. Identified with cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-05toradex: MAINTAINERS: entries for new reST docsIgor Opaniuk
Add entries for the newly created documentation files in reST format. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05doc: board: colibri-imx8x: convert readme to reSTIgor Opaniuk
Convert README to reStructuredText format. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05doc: board: apalis-imx8: convert readme to reSTIgor Opaniuk
Convert README to reStructuredText format. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05doc: board: verdin-imx8mm: convert readme to reSTIgor Opaniuk
Convert README to reStructuredText format. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: spell out U-Boot correctly] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05doc: board: toradex: add colibri_imx7.rstIgor Opaniuk
- add initial index for toradex boards reST documentation - add initial colibri_imx7.rst doc file which provides all needed information for obtaining a workable image ready for flashing for both eMMC/NAND versions of Colibri iMX7. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: make title underline the same length as the title itself] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05x86: Correct error return value in mrccache_get_region()Simon Glass
This function doesn't use uclass_find_first_device() correctly. Add a check that the device is found so we don't try to read properties from a NULL device. The fixes booting on minnoxmax. Fixes: 87f1084a630 ("x86: Adjust mrccache_get_region() to use livetree") Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-04Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Limit bootloader size to 1 MiB on R-Car Gen3
2020-03-04Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- ABB SECU board - Assorted minor fixes
2020-03-04Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DFU / Thor fixes
2020-03-03Merge tag 'dm-pull-3mar20' of git://git.denx.de/u-boot-dmTom Rini
Fixes for power domain on device removal
2020-03-03ARM: socfpga: Add initial support for the ABB SECU boardHolger Brunck
Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-03-02video: meson: keep power domain up after bootingAnatolij Gustschin
Add driver flag to skip power domain disabling on device removal. Fixes: 52edfed65de9 ("dm: core: device: switch off power domain after device removal") Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Guillaume La Roque <glaroque@baylibre.com>
2020-03-02dm: core: Add a flag for power domain control on device removalAnatolij Gustschin
In various cases a power domain must stay enabled after device removal when booting OS (i.e. serial debug console or display). Add a flag to selectively skip switching off a power domain. Fixes: 52edfed65de9 ("dm: core: device: switch off power domain after device removal") Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Guillaume La Roque <glaroque@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-02Merge tag 'u-boot-stm32-20200203' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - convert stm32mp1 board documentation to rst format
2020-03-02Merge tag 'xilinx-for-v2020.04-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx fixes for v2020.04-rc4 - Fix link good bit handling in dp83867 - Rename generic Zynq defconfig - Fix zybo z7 low leve setup - Fix error path in zynq_gem driver and fix 64bit usage - Fix invalid clock name quieries for Versal - Fix zynq/zynqmp SPL low level configuration via DT selection
2020-03-02doc: add board documentation for stm32mp1Patrick Delaunay
Change plain test README to rst format and move this file in documentation directory. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-02stm32mp1: rng: remove superfluous assignmentHeinrich Schuchardt
We should not assign a value that is overwritten before use. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-03-01ARM: socfpga: Add missing Denali NAND config optionsMarek Vasut
The Denali SPL shim won't build without these options set, set them accordingly to fix the build error and let the SPL shim to work correctly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-03-01ARM: socfpga: Permit overriding the default timer frequencyMarek Vasut
The default timer rate may be different than 25 MHz, permit overriding the default rate in board configuration file. Ultimatelly, this should be properly handled by a clock driver, however that is not available on Gen5 yet. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-03-01rtc: m41t62: add compatible for m41st87Marek Vasut
This adds a compatible string for m41st87. This ensures that this driver can be used for m41st87. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-03-01gadget: f_thor: add missing line breaks for pr_err()Seung-Woo Kim
After the commit 9b643e312d52 ("treewide: replace with error() with pr_err()"), there are pr_err() usages without line break. Add missing line breaks for pr_err() used in f_thor. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2020-03-01dfu: Reset timeout in case of DFU requestAndy Shevchenko
In case dfu command is being executed with timeout option, the timer may expire in the middle of DFU operation. If there is DFU request coming, we may simple reset timeout value to prevent aborting of ongoing DFU operation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Ferry Toth <ftoth@exalondelft.nl>
2020-03-01ARM: rmobile: Limit bootloader size to 1 MiB on R-Car Gen3Marek Vasut
The HF/QSPI flash layout permits up to 1 MiB large bootloader blob, set CONFIG_BOARD_SIZE_LIMIT to enforce this limit and set the monitor size to match accordingly. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-02-29Merge tag 'efi-2020-04-rc4-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc4 (2) In Linux next-20200228 patches have been merged to load an initial ramdisk using an EFI_LOAD_FILE2_PROTOCOL provided by the firmware. See commit ec93fc371f01 ("efi/libstub: Add support for loading the initrd from a device path"). The idea behind it is that the firmware should be responsible for validating the initrd in a secure boot setup. This pull-request comprises a patch series which let's U-Boot provide an initial implementation of the EFI_LOAD_FILE2_PROTOCOL providing the initrd.
2020-02-29Merge tag 'uniphier-v2020.04-3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier UniPhier SoC updates for v2020.04 (3rd) - Enable ADMA and HS400 for the eMMC driver on 64-bit SoCs - Add some convenient environment variables to handle SD card - Sanitize the NAND controller reset sequence and its WP handling - Sync DT with Linux
2020-02-29ARM: dts: uniphier: remove U-Boot own EEPROM compatible and propertyMasahiro Yamada
The compatible string "i2c-eeprom" is U-Boot own compatible, which has never been approved by the DT community. "u-boot,i2c-offset-len" is also a U-Boot own hack. Linux adds "atmel,*" as generic compatibles, and U-Boot also followed it by commit d7e28918aa3f ("i2c_eeprom: Add reading support"). The U-Boot own hack is no longer needed. Just sync with Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29ARM: dts: uniphier: add reset-names to NAND controller nodeMasahiro Yamada
Import Linux commits: 37f3e0096f71 ("ARM: dts: uniphier: add reset-names to NAND controller node") e98d5023fe1f ("arm64: dts: uniphier: add reset-names to NAND controller node") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29ARM: dts: uniphier: rename DT nodes to follow json-schemaMasahiro Yamada
Import the nodename changes I made in Linux for avoiding dt-schama warnings. This follows the $nodename patterns in the dt-schema. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28doc/efi: add load file 2 protocol to HTML documentationHeinrich Schuchardt
The load file 2 protocol can be used by the Linux kernel to load the initial RAM disk. U-Boot can be configured to provide an implementation. Add a description to the UEFI overview and document the related functions in the API section. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-28efi_selftest: add selftests for loadfile2 used to load initramfsIlias Apalodimas
Provide a unit test loading an initial ramdisk using the EFI_LOAD_FILE2_PROTOCOL. The test is only executed on request. An example usage - given a file image with a file system in partition 1 holding file initrd - is: * Configure the sandbox with CONFIG_EFI_SELFTEST=y CONFIG_EFI_LOAD_FILE2_INITRD=y CONFIG_EFI_INITRD_FILESPEC="host 0:1 initrd" * Run ./u-boot and execute host bind 0 image setenv efi_selftest load initrd bootefi selftest This would provide a test output like: Testing EFI API implementation Selected test: 'load initrd' Setting up 'load initrd' Setting up 'load initrd' succeeded Executing 'load initrd' Loaded 12378613 bytes CRC32 2997478465 Executing 'load initrd' succeeded Now the size and CRC32 can be compared to the provided file. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-28efi_loader: Implement FileLoad2 for initramfs loadingIlias Apalodimas
Following kernel's proposal for an arch-agnostic initrd loading mechanism [1] let's implement the U-boot counterpart. This new approach has a number of advantages compared to what we did up to now. The file is loaded into memory only when requested limiting the area of TOCTOU attacks. Users will be allowed to place the initramfs file on any u-boot accessible partition instead of just the ESP one. Finally this is an attempt of a generic interface across architectures in the linux kernel so it makes sense to support that. The file location is intentionally only supported as a config option argument(CONFIG_EFI_INITRD_FILESPEC), in an effort to enhance security. Although U-boot is not responsible for verifying the integrity of the initramfs, we can enhance the offered security by only accepting a built-in option, which will be naturally verified by UEFI Secure Boot. This can easily change in the future if needed and configure that via ENV or UEFI variable. [1] https://lore.kernel.org/linux-efi/20200207202637.GA3464906@rani.riverdale.lan/T/#m4a25eb33112fab7a22faa0fd65d4d663209af32f Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-28Merge branch '2020-02-28-mpc8xx-fixes'Tom Rini
- Fix the watchdog on mpc8xx platforms
2020-02-28watchdog: Don't select CONFIG_WATCHDOG and CONFIG_HW_WATCHDOG at the same timeChristophe Leroy
Commit 06985289d452 ("watchdog: Implement generic watchdog_reset() version") introduced an automatic selection of CONFIG_WATCHDOG by CONFIG_WDT. But for boards selecting CONFIG_HW_WATCHDOG, like boards have a powerpc 8xx, CONFIG_WATCHDOG shall not be selected as they are mutually exclusive. Make CONFIG_WATCHDOG dependent on !CONFIG_HW_WATCHDOG Fixes: 06985289d452 ("watchdog: Implement generic watchdog_reset() version") Cc: Stefan Roese <sr@denx.de> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-02-28watchdog: mpc8xx: Revert the 8xx watchdog back to CONFIG_HW_WATCHDOGChristophe Leroy
Commit f3729ba6e7b2 ("watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup") switched the watchdog to CONFIG_WATCHDOG. But this is not compatible with the 8xx because it starts the watchdog HW timer at reset and must be serviced from the very beginning including while U-boot is executed in the firmware before relocation in RAM. Select CONFIG_HW_WATCHDOG and make hw_watchdog_reset() visible. Meanwhile, finalise the cleanup of arch/powerpc/cpu/mpc8xx/Kconfig by removing the lines put in comment in that commit, and also remove again the selection of CONFIG_MPC8xx_WATCHDOG which was removed by that commit and brought back by mistake by commit b3134ffbd944 ("watchdog: Kconfig: Sort entry alphabetically") Note that there was an 'imply WATCHDOG' in the original commit but it disappeared in the Kconfig alphabetical sorting, so no need to remove it here. Fixes: f3729ba6e7b2 ("watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup") Fixes: b3134ffbd944 ("watchdog: Kconfig: Sort entry alphabetically") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Stefan Roese <sr@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-02-28ARM: zynq: Remove single comment about QSPIMichal Simek
Very likely configs have been moved to Kconfig by scripts and this just remains there that's why remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28ARM: zynq: Rename defconfig to be align with ZynqMP and VersalMichal Simek
Just cosmetic change before real switch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28arm: xilinx: Fill DEVICE_TREE directly in MakefilesMichal Simek
DEVICE_TREE variable is not exported from dts/Makefile that's why it is necessary to setup directly before use. Fixes: 312f2c5b14fa ("arm: xilinx: Use device tree which can be passed on cmd line") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28net: zynq: Free allocated buffers in case of errorMichal Simek
Driver probe function is called again and again in case of error. Malloc space is getting full which is is reported by: Insufficient RAM for page table: 0x15000 > 0x14000. Please increase the size in get_page_table_size() ### ERROR ### Please RESET the board ### The patch is freeing allocated buffers on error path to avoid panic. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2024-12-25 16:57:15 +0000