summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-06-18fs: btrfs: Do not fail when all root_backups are emptyYevgeny Popovych
This is the case when reading freshly created filesystem. The error message is like the following: btrfs_read_superblock: No valid root_backup found! Since the data from super_roots/root_backups is not actually used - decided to rework btrfs_newest_root_backup() into btrfs_check_super_roots() that will only check if super_roots array is valid and correctly handle empty scenario. As a result: * btrfs_read_superblock() now only checks if super_roots array is valid; the case when it is empty is considered OK. * removed root_backup pointer from btrfs_info, which would be NULL in case of empty super_roots. * btrfs_read_superblock() verifies number of devices from the superblock itself, not newest root_backup. Signed-off-by: Yevgeny Popovych <yevgenyp@pointgrab.com> Cc: Marek Behun <marek.behun@nic.cz> Cc: Sergey Struzh <sergeys@pointgrab.com>
2018-06-18.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignoreMasahiro Yamada
Follow Linux commit 10b62a2f785a (".gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-18.gitignore: sort normal pattern rules alphabeticallyMasahiro Yamada
Follow Linux commit 1377dd3e2987 (".gitignore: sort normal pattern rules alphabetically"). This would allow us to easily catch duplicated patterns if any. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-18dm: gpio: Add DM compatibility to GPIO driver for DavinciAdam Ford
This adds DM_GPIO support for the davinici GPIO driver with DT support. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-06-18MAINTAINERS: update ARM SnapdragonRamon Fried
Replace Mateusz as Maintainer for ARM Snapdragon arch. Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Acked-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
2018-06-18db410c: fix alignment of dts fileRamon Fried
Alignment was wrong, missing one tab. fix it. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-06-18iotrace: fix behaviour when buffer is fullRamon Fried
Don't continue updating the offset when buffer is full. When the buffer size exhausts and there's no space left to write warn the user and update only the needed size and not both the offset and needed size. Add needed buffer size information in the iotrace command. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-06-18cmd: iotrace: add dump trace commandRamon Fried
Add dump trace command which dump all trace buffer content in a much more readable fashion than md. Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-18iotrace: move record definitons to header fileRamon Fried
The header definitions are needed for reading record information in cmd/iotrace.c Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-18ARM: sunxi: remove empty #ifdef/endif blockChris Packham
Whatever code this was guarding has been removed so remove the guards too. Signed-off-by: Chris Packham <judge.packham@gmail.com>
2018-06-18m68k: Remove empty #ifdef/#ifndef blockChris Packham
Whatever code this was guarding has been removed so remove the guards too. Signed-off-by: Chris Packham <judge.packham@gmail.com>
2018-06-18configs: Remove empty #ifdef/#ifndef blocksChris Packham
Remove empty #ifdef/#ifndef..#endif blocks where the configuration they guarded has been completely removed. Signed-off-by: Chris Packham <judge.packham@gmail.com>
2018-06-18doc: avb2.0: add README about AVB2.0 integrationIgor Opaniuk
Contains: 1. Overview of Android Verified Boot 2.0 2. Description of avb subset of commands 3. Examples of errors when boot/vendor/system/vbmeta partitions are tampered 4. Examples of enabling AVB2.0 on your setup Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
2018-06-18test/py: avb2.0: add tests for avb commandsIgor Opaniuk
1. Run AVB 2.0 full verification chain, avb verify 2. Check if 'avb get_uuid' works, compare results with 'part list mmc 1' output 3. Test `avb read` commands, which reads N bytes from a partition identified by a name Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
2018-06-18am57xx_hs: avb2.0: add support of AVB 2.0Igor Opaniuk
1. Add vbmeta partition info to android partition layout for TI platforms. 2. Add support of AVB 2.0 (including avb subset of commands) for am57xx HS Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> [trini: Move to include/environment/ti/boot.h, reword commit slightly] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-18avb2.0: add boot states and dm-verity supportIgor Opaniuk
1. Add initial support of boot states mode (red, green, yellow) 2. Add functions for enforcing dm-verity configurations Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
2018-06-18cmd: avb2.0: avb command for performing verificationIgor Opaniuk
Enable a "avb" command to execute Android Verified Boot 2.0 operations. It includes such subcommands: avb init - initialize avb2 subsystem avb read_rb - read rollback index avb write_rb - write rollback index avb is_unlocked - check device lock state avb get_uuid - read and print uuid of a partition avb read_part - read data from partition avb read_part_hex - read data from partition and output to stdout avb write_part - write data to partition avb verify - run full verification chain Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
2018-06-18avb2.0: implement AVB opsIgor Opaniuk
Implement AVB ops on top of existing mmc subsystem API. Currently there is a full implementation of such operations, defined by [1] AVB2.0 specification: .read_from_partition() - reads N bytes from a partition identified by a name. .write_to_partition() - Writes N bytes to a partition identified by a name. .validate_vbmeta_public_key() - checks if the given public ‘vbmeta’ partition is trusted. .get_unique_guid_for_partition() - Gets the GUID for a partition identified by a string name. As [1] specification recommends to use tamper-evident storage for storing rollback indexes and device state (LOCKED/UNLOCKED), currently are only stubs instead of full implementation for these ops: .read_rollback_index() - Gets the rollback index for a given index location .write_rollback_index() - Sets the rollback index to a given location .read_is_device_unlocked() - Gets where the device is unlocked [1] https://android.googlesource.com/platform/external/avb/+/master/README.md Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
2018-06-18avb2.0: integrate avb 2.0 into the build systemIgor Opaniuk
Integrate libavb into the build system. Introduce CONFIG_LIBAVB build option. Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
2018-06-18avb2.0: add Android Verified Boot 2.0 libraryIgor Opaniuk
Add libavb lib (3rd party library from AOSP), that implements support of AVB 2.0. This library is used for integrity checking of Android partitions on eMMC. libavb was added as it is and minimal changes were introduced to reduce maintenance cost, because it will be deviated from AOSP upstream in the future. Changes: - license headers changed to conform SPDX-style - avb_crc32.c dropped - updates in avb_sysdeps_posix.c/avb_sysdeps.h For additional details check [1] AVB 2.0 README. [1] https://android.googlesource.com/platform/external/avb/+/master/README.md Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
2018-06-18Merge git://git.denx.de/u-boot-x86Tom Rini
2018-06-18mx6cuboxi: fix 4GB ddr memory detectionJon Nettleton
The soms with 4GB ddr have a rowaddr of 16 not 15, this allows the detection mechanism to properly identify them as 4GB. However these soms can be populated with whatever amount of memory the customer requests therefor we need a ram stride test. We can not use the get_ram_size() function because not all 4GB's of DDR is addressable on a 32-bit architecture. Therefore instead we use a memory stride of 128MB's and look for the address that the memory wraps. This function is used for all som types to catch most memory configurations. This is a revised version of Rabeeh Khoury's original code. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-18mx6cuboxi: consolidate board detection and add som revision checkingJon Nettleton
In order to properly detect the board the checks need to be done in a specific order. Move these tests back into a single enum function that will always return the proper the board it is checking. This also adds the best test we have for detecting the rev 1.5 som, and it simplifies the device-tree filename building. Signed-off-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-18drivers/gpio/mxc: fix MXC GPIO name in KConfigHannes Schmelzer
The naming with "UART" is obviously wrong, we fix this here. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-18board: engicam: spl: match icore-mipi fit-configJagan Teki
Match imx6q-icore-mipi and imx6dl-icore-mipi dtb in board_fit_config_name_match. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-06-18config: Update defconfig for imx53 K+P boardsLukasz Majewski
This commit updates the defconfig for the HSC and DDC boards. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18board: Remove not needed function for the K+P's imx53 boardLukasz Majewski
The get_board_rev() is not needed anymore as a generic function for the imx53 SoC has been used instead. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18board: Silent out the console on the K+P's imx53 boardsLukasz Majewski
Disable console output by default on imx53 based boards from K+P. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18board: Add support for KEY1 status detection on K+P's HSC|DDC boardsLukasz Majewski
This code provides information if the K+P's imx53 boards had KEY1 pressed. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18board: Adjust K+P script to run misc (per board) adjustmentsLukasz Majewski
This change gives the opportunity to adjust Linux command line for the imx53 device with some legacy data. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18board: imx53: Always disable display before starting kernelLukasz Majewski
This patch prevents from the situation where we may end up with garbage displayed on the LCD panel. Such situation occurs when one performs "reboot -f" in Linux and then stop in U-boot (or observe the garbage on the screen during boot up). To prevent from such situation - the PWM pin is configured as GPIO and set to LOW. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18pico-imx7d: Adjust the dtb nameFabio Estevam
Since kernel commit 41bbeadceb03 ("ARM: dts: imx7d-pico-pi: Separate into cpu and baseboard dts") the dtb name has changed. Fix it accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-06-18spl: Add default values for ARCH_MX7Fabio Estevam
ARCH_MX6 has default values for SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR and SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR. Do the same for ARCH_MX7 so that users may have a consistent experience through the i.MX families. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-06-18wandboard: Remove hardcoded baudrate from "console" variableOtavio Salvador
We should use the baudrate variable available inside U-Boot environment to allow it to be changed dynamically. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-06-18ARM: mxs: let boards override entire dram parameter tableMans Rullgard
If many values differ from the defaults, overriding the full table is simpler and more space efficient than tweaking it through mxs_adjust_memory_params(). Signed-off-by: Mans Rullgard <mans@mansr.com>
2018-06-18imx: Enable ACTLR.SMP bit for all i.MX cortex-a7 platformsYe Li
According to the Cortex-A7 TRM, for ACTLR.SMP bit "You must ensure this bit is set to 1 before the caches and MMU are enabled, or any cache and TLB maintenance operations are performed". ROM sets this bit in normal boot flow, but when in serial download mode, it is not set. Here we add it in u-boot as a common flow for all i.MX cortex-a7 platforms, including mx7d, mx6ul/ull and mx7ulp. Signed-off-by: Ye Li <ye.li@nxp.com> [fabio: adapted to U-Boot mainline codebase and make checkpatch happy] Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-18display5: Add missing environment.h include to avoid warningLukasz Majewski
Without this change the following warning shows up when building: board/liebherr/display5/display5.c:270:3: warning: implicit declaration of function ‘eth_env_set_enetaddr’ [-Wimplicit-function-declaration] This commit fixes this issue. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Add GPT verification and restoration code on SWUpdate entryLukasz Majewski
If GPT gets broken, then after N boot attempts we will run the SWUpdate restoration image. On its enter we will check GPT and restore it if needed. To test it: display5 > mmc write 0x12000000 4 8 It will overwrite the primary GPT table. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: display5_defconfig: Enable support for gpt command (CMD_GPT) in ↵Lukasz Majewski
production u-boot After this change one can run 'gpt' command on production u-boot. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Reduce rootfs2 (BACKUP) size from 1528M to 512MLukasz Majewski
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Add cma=256M to command line argumentsLukasz Majewski
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: net: Add function to read ethaddr from iMX6 fusesLukasz Majewski
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: ddr: Enable support for DDR3 auto calibrationLukasz Majewski
This code performs DDR3 memory calibration for display5 board. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Update swupdate initramfs file name (now supporting ext4)Lukasz Majewski
After moving to swupdate 2017.07, the default fs for swupdate rootfs is ext4, not ext3. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: factory: Update BACKUP rootfs in factory modeLukasz Majewski
After splitting rootfs images to BACKUP and ACTIVE, the "factory" u-boot also needs to update the former. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Provide 'tftp_mmc_rootfs_bkp' command to write BACKUP rootfsLukasz Majewski
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: wdt: Enable WDT support (both SPL and u-boot)Lukasz Majewski
Test case: The fitImage gets corrupted: truncate -c -s 3M fitImage run tftp_mmc_fitImg setenv boot_os y reset [board shall hang in SPL with "Trying to boot from MMC1" information] Then after X seconds WDT is causing board to reset. After N boot attempts we enter recovery mode. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: Support for the emergency PAD pressingLukasz Majewski
To enter the special mode, one needs to short cut two pads with e.g. screw driver. After power up the SPL will execute u-boot in which proper actions will be taken. It is worth noting that we do not alter envs (even the BOOT_FROM variable) and unconditionally go to recovery. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: factory: Extend mtdparts to support LEG factory partitionLukasz Majewski
This special partition has been added solely for production purpose. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18display5: config: Update SPI-NOR partition for larger swupdate-initramfsLukasz Majewski
The SPI-NOR partition information has been updated to store swupdate-kernel-FIT just after envs as well as two times larger swupdate-initramfs image. Signed-off-by: Lukasz Majewski <lukma@denx.de>
generated by cgit (git 2.34.1) at 2025-01-04 13:06:30 +0000