summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-09ARM: rmobile: Add R8A77995 SoCMarek Vasut
Add bits to support yet another SoC, the R8A77995 D3 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09ARM: rmobile: Add R8A77970 SoCMarek Vasut
Add bits to support yet another SoC, the R8A77970 V3M . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-09clk: rmobile: Fix typo in R8A7796 RPC clock table entryMarek Vasut
Fix a copy-paste typo in the clock table entry, s/7795/7796/. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-12-08Merge git://git.denx.de/u-boot-mpc85xxTom Rini
2017-12-08Merge git://git.denx.de/u-boot-rockchipTom Rini
2017-12-08rockchip: rk3399-puma: preserve leading zeros in serial#Jakob Unterwurzacher
Linux preserves leading zeros in /proc/cpuinfo, so we should as well. Otherwise we have the situation that /sys/firmware/devicetree/base/serial-number and /proc/cpuinfo disagree in Linux. Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-12-07Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-12-07armv8: fix gd after relocationYork Sun
Commit 21f4486faa5d ("armv8: update gd after relocate") sets x18 without checking the return value of spl_relocate_stack_gd(). Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: York Sun <york.sun@nxp.com> CC: Kever Yang <kever.yang@rock-chips.com> CC: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-12-07log: Add documentationSimon Glass
Add documentation for the log system. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-07log: test: Add a pytest for loggingSimon Glass
Add a test which tries out various filters and options to make sure that logging works as expected. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-07log: sandbox: Enable loggingSimon Glass
Enable all logging features on sandbox so that the tests can be run. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-07log: Plumb logging into the init sequenceSimon Glass
Set up logging both before and after relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-07log: Add a test commandSimon Glass
Add a command which exercises the logging system. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-07log: Add a 'log level' commandSimon Glass
Add a command for adjusting the log level. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-07log: Add a console driverSimon Glass
It is useful to display log messages on the console. Add a simple driver to handle this. Note that this driver outputs to the console, which may be serial or video. It does not specifically select serial output. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-07log: Add an implementation of loggingSimon Glass
Add the logging header file and implementation with some configuration options to control it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-07Drop the log bufferSimon Glass
This does not appear to be used by any boards. Before introducing a new log system, remove this old one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-07usb: Correct use of debug()Simon Glass
With clang this gives a warning because hubsts appears to be used before it is set, even if ultimately it is not used. Simplify the code to avoid this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-07mtdparts: Correct use of debug()Simon Glass
The debug() macro now evaluates its expression so does not need #ifdef protection. In fact the current code causes a warning with the new log implementation. Adjust the code to fix this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-07Move debug and logging support to a separate headerSimon Glass
Before adding new features, move these definitions to a separate header to avoid further cluttering common.h. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-07Revert "sandbox: Drop special case console code for sandbox"Simon Glass
While sandbox works OK without the special-case code, it does result in console output being stored in the pre-console buffer while sandbox starts up. If there is a crash or a problem then there is no indication of what is going on. For ease of debugging it seems better to revert this change also. This reverts commit d8c6fb8cedbc35eee27730a7fa544e499b3c81cc. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-07sandbox: Adjust pre-console address to avoid conflictSimon Glass
We cannot use sandbox memory at 0 since other things use memory at that address. Move it up out of the way. Note that the pre-console buffer is currently disabled with sandbox, but this change will avoid confusion if it is manually enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-07Revert "sandbox: remove os_putc() and os_puts()"Simon Glass
While sandbox works OK without the special-case code, it does result in console output being stored in the pre-console buffer while sandbox starts up. If there is a crash or a problem then there is no indication of what is going on. For ease of debugging it seems better to revert this change. This reverts commit 47b98ad0f6779485d0f0c14f337c3eece273eb54. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-07Merge git://git.denx.de/u-boot-i2cTom Rini
2017-12-07cmd: i2c: Fix use sdram sub command with CONFIG_DM_I2CNobuhiro Iwamatsu
sdram sub command of i2c command does not support Drivers Model. This adds Drivers Model support to sdram sub command. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-12-07i2c: at91_i2c: remove the .probe_chip functionAlan Ott
The .probe_chip function is supposed to probe an i2c device on the bus to determine whether a device is answering to a particular address. at91_i2c_probe_chip() did not do anything resembling this and always returned 0. It looks as though at91_i2c_probe_chip() was intended to be a .probe function for the controller, as it was copied-and-pasted to become at91_i2c_probe() in 0bc8f640a4d7ed. Removing the at91_i2c_probe_chip() function makes the higher layer (i2c_probe_chip()) try a zero-length read transfer to test for the presence of a device instead, which does work. Signed-off-by: Alan Ott <alan@softiron.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-12-07i2c: at91_i2c: Wait for TXRDY after sending the first byteAlan Ott
The driver must wait for TXRDY after each byte is pushed into the i2c FIFO before pushing the next byte. Previously this was not done for the first byte, causing a race condition with zeros sometimes being sent for the next byte (which is typically the first actual data byte). Signed-off-by: Alan Ott <alan@softiron.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-12-07i2c: meson: add some commentsBeniamino Galvani
Add some comment describing the purpose of struct members and functions. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-12-07i2c: meson: fix return codes on errorBeniamino Galvani
Change meson_i2c_xfer_msg() to return -EREMOTEIO in case of NACK, as done by other drivers. Also, don't change the return error in meson_i2c_xfer(). Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-12-07i2c: meson: reduce timeoutBeniamino Galvani
The datasheet doesn't specify a suggested timeout and 500ms seems very long: reduce it to 100ms. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-12-07i2c: meson: improve Kconfig descriptionBeniamino Galvani
Expand the Kconfig description with hardware features. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-12-06armv8: ls1088a: Add nand support for ls1088ardbAshish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06driver: fsl-mc: MC object cleanup when DPL not loadedYogesh Gaur
For case when MC is loaded but DPL is not deployed perform MC object [DPBP, DPIO, DPNI and DPRC] cleanup. Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06SECURE BOOT: Add fall back optionVinitha Pillai-B57223
Add fall back option, to boot from NOR/QSPI/SD for LS1043, LS1046, LS1021 in case of distro boot failure. For LS1046, add kernel validation in case of secure boot in sd_bootcmd and qspi_bootcmd. For LS1043 and LS1021, add kernel validation in case of secure boot in sd_bootcmd, qspi_bootcmdand nor_bootcmd. Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06armv8: LS2080A_SECURE_BOOT: Enable CONFIG_FSL_LS_PPA.Udit Agarwal
Adds config CONFIG_FSL_LS_PPA and CONFIG_FSL_CAAM in LS2080AQDS and LS2080ARDB secure boot defconfig. Removes CONFIG_FIT, as with CONFIG_FSL_LS_PPA enabled, CONFIG_FIT is selected. Removes CONFIG_SPL_RSA as in NOR boot SPL boot is not done. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06armv8: LS1088A_QSPI: Add secure boot defconfigs for QSPI boot.Udit Agarwal
Add the secure boot defconfigs for QSPI boot on LS1088ARDB and LS1088AQDS platforms. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06armv8: LS1088A_QSPI: SECURE_BOOT: Images validationUdit Agarwal
Validates PPA, MC, DPC, Bootscript, DPL and Kernel images in ESBC phase using esbc_validate command. Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment Add header address for PPA to be validated during ESBC phase for LS1088A platform based on LAyerscape Chasis 3. Moves sec_init prior to ppa_init as for validation of PPA sec must be initialised before the PPA is initialised. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06armv8: ls1012a: Modify Kernel and Environment offsetBhaskar Upadhaya
Kernel is now located at 0x1000000 instead of 0xa00000 and envirorment variables are located at 3MB offset instead of 2MB in Flash. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06armv8: Workaround for USB erratua on LS1012ARan Wang
This is suplement for patch which handle below errata: A-009007, A-009008, A-008997, A-009798 Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06armv8: fsl-layerscape: Add support of disabling core prefetchPrabhakar Kushwaha
Instruction prefetch feature is by default enabled during core release. This patch add support of disabling instruction prefetch by setting core mask in PPA. Here each core mask bit represents a core and prefetch is disabled at the time of core release. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06armv8: ls1088: Add fsl_fdt_fixup_flashAshish Kumar
IFC-NOR and QSPI-NOR signals are muxed on SoC to save pins Add fsl_fdt_fixup_flash() to disable IFC-NOR node in dts if QSPI is enabled and vice-versa Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06driver: net: fsl-mc: flib changes for MC 10.3.0Yogesh Gaur
Existing MC driver framework is based on MC-9.x.x flib. This patch migrates MC obj (DPBP, DPNI, DPRC, DPMAC etc) to use latest MC flib which is MC-10.3.0. Changes introduced due to migration: 1. To get OBJ token, pair of create and open API replaces create APIs 2. Pair of close and destroy APIs replaces destroy APIs 3. For version read, get_version APIs replaces get_attributes APIs 4. dpni_get/reset_statistics APIs replaces dpni_get/set_counter APIs 5. Simplifies struct dpni_cfg and removes dpni_extended_cfg struct 6. Single API dpni_get_buffer_layout/set_buffer_layout replaces dpni_get_rx/set_rx, tx related, tx_conf_buffer_layout related APIs. New API takes a queue type as an argument. 7. Similarly dpni_get_queue/set_queue replaces dpni_get_rx_flow/set_rx_flow , tx_flow related, tx_conf related APIs Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06armv8: ls1088a: Unset USE_BOOTCOMMAND in defconfigAshish Kumar
Unset USE_BOOTCOMMAND for all ls1088 defconfig files to fix redefinition error. USE_BOOTCOMMAND was introduced in commit b6251db8c3f ("Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND"). Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06powerpc: mpc85xx: Fix static TLB table for SDRAMYork Sun
Most predefined TLB tables don't have memory coherence bit set for SDRAM. This wasn't an issue before invalidate_dcache_range() function was enabled. Without the coherence bit, dcache invalidation doesn't automatically flush the cache. The coherence bit is already set when dynamic TLB table is used. For some boards with different SPL boot method, or with legacy fixed setting, this bit needs to be set in TLB files. Signed-off-by: York Sun <york.sun@nxp.com>
2017-12-06powerpc/p1_p2_rdb_pc: Fix endian access issue on EHCI intinalizationRan Wang
This issue is exposed after commit 9000eddbae0d ("drivers/usb/ehci: Use platform-specific accessors"), the wrong endianness of EHCI controller programing will cause USB function down. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06powerpc/T104xRDB: Fix endian access issue on EHCI intinalizationRan Wang
This issue is exposed after commit 9000eddbae0d ("drivers/usb/ehci: Use platform-specific accessors"), the wrong endianness of EHCI controller programing will cause USB function down. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-05tools: omapimage: fix corner-case in byteswap pathPhilipp Tomsich
Since commit 2614a208471e ("common: command: tempory buffer should have size of command line buf"), there have been consistent Travis CI failures on my builds (interestingly not for Tom, even though building the same commit id) due to a SEGV in building the byteswapped omapimage: arm: pcm051_rev3 make[2]: *** [MLO.byteswap] Error 139 ^^^ error code for a SEGV Turns out that the word-based byte-swapping loop in omapimage.c is to blame. With the loop condition while (swapped <= (sbuf->st_size / sizeof(uint32_t))) there had been one-too-many iterations for all file sizes divisible by the sizeof(uint32_t). I.e. we had 1 iteration for 0 bytes (and also 1 through 3 bytes) and 2 iterations at 4 bytes... clearly overshooting on 0 and 4 bytes. This commit fixes the calculation of an up-rounded word-count and makes sure to keep the zero-based loop-counter below the number of words to be processed. References: 2614a20 ("common: command: tempory buffer should have size of command line buf") Fixes: 79b9ebb ("omapimage: Add support for byteswapped SPI images") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Martin Elshuber <martin.elshuber@theobroma-systems.com>
2017-12-05Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2017-12-05 Highlights for this release: - Dynamic EFI object creation (lists instead of static arrays) - EFI selftest improvements - Minor fixes
2017-12-05efi_stub: Use efi_uintn_tAlexander Graf
Commit f5a2a93892f ("efi_loader: consistently use efi_uintn_t in boot services") changed the internal EFI API header without adapting its existing EFI stub users. Let's adapt the EFI stub as well. Fixes: f5a2a93892f ("efi_loader: consistently use efi_uintn_t in boot services") Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-12-04Prepare v2018.01-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>