summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-04configs: P3041DS: enable DM_I2CBiwen Li
This enables DM_I2C in P3041DS defconfigs, except P3041DS SECURE_BOOT and SRIO_PCIE_BOOT defconfig Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04powerpc: dts: P3041: add i2c nodeBiwen Li
This adds i2c node for SoC P3041 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04config: P2041RDB: enable DM_I2CBiwen Li
This enables DM_I2C in P2041RDB defconfig, except P2041RDB SRIO_PCIE_BOOT and SECURE_BOOT defconfigs Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04dm: powerpc: P2041RDB: add i2c DM supportBiwen Li
This supports i2c DM for board P2041RDB Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04configs: P2020RDB: enable DM_I2C and DM_RTCBiwen Li
This enables DM_I2C and DM_RTC in P2020RDB defconfigs Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04dts: powerpc: P2020RDB: add i2c nodeBiwen Li
This adds i2c node for board P2020RDB Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04configs: P1020RDB: enable DM_I2C and DM_RTCBiwen Li
This enables DM_I2C and DM_RTC in P1020RDB defconfigs Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04dm: powerpc: P1020: add i2c DM supportBiwen Li
This supports i2c DM for SoC P1020 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04configs: P5040DS: enable DM_I2CBiwen Li
This enable DM_I2C in P5040DS defconfigs, except P5040DS SECURE_BOOT defconfigs Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04dm: powerpc: P5040DS: add i2c DM supportBiwen Li
This supports i2c DM for board P5040DS Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04powerpc: create dts component of i2c to build up an SoCBiwen Li
Provide a common i2c components that we can utilize to build up the various device tree. Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04rtc: pt7c4338: Add driver model supportBiwen Li
Add support of driver model of pt7c4338 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04rtc: ds1337: Add driver model supportBiwen Li
Add support of driver model of ds1337 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-02MAINTAINERS: MediaTek: add USB related filesChunfeng Yun
Add dt-binding files of xhci-mtk and phys, C files of phys. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02dt-bindings: usb: mtk-xhci: Add binding for MediaTek xHCI host controllerChunfeng Yun
Add dt-binding for MediaTek xHCI host controller Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02dt-bindings: phy-mtk-tphy: add properties of address mapping and clocksChunfeng Yun
1. add the address mapping related properties; 2. make "ref" clock optional, and add optional clock "da_ref"; 3. add the banks layout of TPHY V1 and V2; Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02arm: dts: mt7629: add usb related nodesChunfeng Yun
Add usb, phy and clock nodes Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02xhci: mediatek: Add support for MTK xHCI host controllerChunfeng Yun
This patch is used to support the on-chip xHCI controller on MediaTek SoCs, currently control/bulk/interrupt transfers are supported. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-02phy: phy-mtk-tphy: add a new reference clockChunfeng Yun
Usually the digital and analog phys use the same reference clock, but some platforms have two separate reference clocks for each of them, so add another optional clock to support them. In order to keep the clock names consistent with PHY IP's, change the da_ref for analog phy and ref clock for digital phy. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02phy: phy-mtk-tphy: add support new versionChunfeng Yun
The new version removes all shared banks between multi-phys Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02phy: phy-mtk-tphy: add support USB physChunfeng Yun
Support USB2 and USB3 PHY with shared banks when support multi-phys Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02usb: dwc2_udc_otg: use the phy bulk API to get physChunfeng Yun
Use the phy bulk API to get a group of phys Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02usb: dwc3: use the phy bulk API to get physChunfeng Yun
Get a group of phys by the phy bulk API Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02test: dm: phy: add a test item for the phy_bulk APIChunfeng Yun
Add a test item for the phy_bulk API Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-02phy: Add API for a bulk of physChunfeng Yun
This patch adds a "bulk" API to the phy API in order to get/init/exit/power on/off a group of phys associated with a device. The bulk API will avoid adding a copy of the same code to manage a group of phys in drivers. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-02test: dm: add test item for ofnode_get_child_count()Chunfeng Yun
Add a test item for ofnode_get_child_count() Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02dm: core: Add function to get child count of ofnode or deviceChunfeng Yun
This patch add function used to get the child count of a ofnode or a device Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-01Merge branch '2020-05-01-master-imports'Tom Rini
- Assorted bug fixes - Framework for enabling D-CACHE in SPL on ARM
2020-05-01.readthedocs.yml: fix type docs/Heinrich Schuchardt
Out documentation directory is doc/ and not docs/. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-01actions: Fix syntax for enabling SYS_RELOC_GD_ENV_ADDRTom Rini
The correct syntax is 'select SYS_...' and not 'select CONFIG_SYS...' Fixes: d5c819b885c2 ("actions: Move defconfig options to Kconfig") Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-01clk: imx: clk-imxrt1050: fix lcdif clock gateGiulio Benetti
LCDIF clock gate was wrong so set it according to RM. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-05-01video: mxsfb: add clk_enable()Giulio Benetti
BROM doesn't enable lcdif by default so add clk_enable() after clk_set_rate(). Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-05-01imxrt1020-evk: README: change dd command destinationGiulio Benetti
Set dd "of=" to "of=/dev/sdX" to be generic and prevent host hard drive damage. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-05-01imxrt1050-evk: README: change dd command destinationGiulio Benetti
Set dd "of=" to "of=/dev/sdX" to be generic and prevent host hard drive damage. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-05-01imx: spl: Fix use of removed SPL_FAT_SUPPORT configHarald Seiler
CONFIG_SPL_FAT_SUPPORT was removed in commit 0c3a9ed409a5 ("spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT"). Fixup a leftover use of the symbol. Fixes: 9d86dbd9cf9d ("imx: spl: implement spl_boot_mode for i.MX7/8/8M") Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01imx: spl: Remove ifdefs in spl_mmc_boot_mode()Harald Seiler
It is hard to read code which contains nested ifdef blocks. Replace them with normal if-blocks and the IS_ENABLED() macro. This is not only more readable but also helps as both arms are validated by the compiler in all cases. Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01Revert "imx: defconfig: Enable CONFIG_SPL_FORCE_MMC_BOOT"Harald Seiler
CONFIG_SPL_FORCE_MMC_BOOT was removed in a previous patch as its behavior is the correct one in all cases. Remove all uses of it from defconfigs. This reverts commit 3201e5b444ae3a13aa31e8b5101ad38d7ff0640d and removes CONFIG_SPL_FORCE_MMC_BOOT from the imx28_xea defconfig. Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01Revert "imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon ↵Harald Seiler
mode" The CONFIG_SPL_FORCE_MMC_BOOT config flag is not needed as its behavior is the correct one in all cases; using spl_boot_device() instead of the boot_device parameter will lead to inconsistency issues, for example, when a board_boot_order() is defined. In fact, this is the reason the parameter was introduced in the first place, in commit 2b1cdafa9fdd ("common: Pass the boot device into spl_boot_mode()"). This reverts commit 772b55723bcbe8ebe84f579d9cdc831d8e18579d. Link: https://lists.denx.de/pipermail/u-boot/2020-April/405979.html Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01imx: spl: return boot mode for asked MMC device in spl_mmc_boot_mode()Anatolij Gustschin
Boards may extend or re-define the boot list in their board_boot_order() function by modifying spl_boot_list. E.g. a board might boot SPL from a slow SPI NOR flash and then load the U-Boot from an eMMC or SD-card. Or it might use additional MMC boot device in spl_boot_list for cases when the image in SPI NOR flash is not found, so it could fall back to eMMC, SD-card or another boot device. Getting the MMC boot mode in spl_mmc will fail when we are trying to boot from an MMC device in the spl_boot_list and the original board boot mode (as returned by spl_boot_device()) is not an MMC boot mode. Fix it by checking the asked MMC boot device from the spl_mmc_boot_mode() argument. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-05-01common/board_r: Drop initr_bedbug wrapperOvidiu Panait
Drop initr_bedbug wrapper and call bedbug_init directly during the init sequence. Signed-off-by: Ovidiu Panait <ovpanait@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-01cmd/bedbug.c: Make bedbug_init have a return valueOvidiu Panait
Do this as a preparation for removing initr_bedbug wrapper from common/board_r.c. Signed-off-by: Ovidiu Panait <ovpanait@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-01common/board_r: arm: Merge initr_enable_interrupts into interrupts_initOvidiu Panait
initr_enable_interrupts() is an ARM-specific wrapper over enable_interrupts(), which is run during the common init sequence. It can be eliminated by moving the enable_interrupts() call to the end of interrupt_init() function, in arch/arm/lib/interrupts*.c. Signed-off-by: Ovidiu Panait <ovpanait@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-01malloc: dlmalloc: add an ability for the malloc to be re-init/init multiple ↵Marek Bykowski
times Malloc gets initialized with a call to mem_malloc_init() with the address the allocation starts to and its size. Currently it is not possible to move the malloc from one memory area to another as the malloc would eventually fail. This patch adds in the ability to re-init the malloc with the updated start address and the size. One of the use cases of this feature is SPL U-Boot running from within the static memory and calling to malloc init from within board_init_f(): arch/arm/cpu/armv8/start.S:reset vector arch/arm/cpu/armv8/start.S:main() arch/arm/lib/crt0_64.S:board_init_f() board/<my_board>/common/spl.c:board_init_f() board/<my_board>/common/spl.c:mem_malloc_init((ulong)CONFIG_SYS_SPL_MALLOC_START, CONFIG_SYS_SPL_MALLOC_SIZE); Shortly after the DDR (main) memory is init and ready we call to malloc init again but this time with the start address in the DDR memory and a much greater size for moving the allocation off the static to the DDR memory: board/<my_board>/common/spl.c:mem_malloc_init((ulong)CONFIG_SPL_MALLOC_OFFSET, CONFIG_SPL_MALLOC_SIZE); Where CONFIG_SYS_SPL_MALLOC_START and CONFIG_SPL_MALLOC_OFFSET are the start addresses of the malloc in the static and DDR memories respectively and CONFIG_SYS_SPL_MALLOC_SIZE=SZ_16K and CONFIG_SPL_MALLOC_SIZE=SZ_2M are the sizes of the mallocs in these memories. Note, now we have a much greater memory, enlarging from 16K to 2M, available for allocation. There is an alternative approach already existing in U-Boot with the use of an early (simplified) malloc and the proper (dlamalloc) malloc however necessitating managing the two mallocs whereas this approach proposes using a single dlmalloc. Signed-off-by: Marek Bykowski <marek.bykowski@gmail.com>
2020-05-01rsa: sig: fix config signature check for fit with paddingPhilippe Reynes
The signature check on config node is broken on fit with padding. To compute the signature for config node, U-Boot compute the signature on all properties of requested node for this config, except for the property "data". But, when padding is used for binary in a fit, there isn't a property "data" but two properties: "data-offset" and "data-size". So to fix the check of signature, we also don't use the properties "data-offset" and "data-size" when checking the signature on config node. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-05-01test/py: vboot: add a test to check fit signature on fit with paddingPhilippe Reynes
The pytest vboot does all his tests on fit without padding. We add the same tests on fit with padding. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-05-01hush: avoid NULL check before free()Heinrich Schuchardt
free() checks if its argument is NULL. Don't duplicate this in the calling code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-01fs: ext4: avoid NULL check before free()Heinrich Schuchardt
free() checks if its argument is NULL. Don't duplicate this in the calling code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-01cmd/gpt: avoid NULL check before free()Heinrich Schuchardt
free() checks if its argument is NULL. Do not duplicate this in the calling code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-05-01tools/fit-image: print a warning when cmd-line for dtc might be truncatedSven Roederer
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
2020-05-01tools/mkimage: fix handling long filenamesSven Roederer
The cmdline for calling the dtc was cut-off when using long filenames (e.g. 245 bytes) for output-file and datafile of "-f" parameter. For FIT-images cmd[MKIMAGE_MAX_DTC_CMDLINE_LEN] is declared (hardcoded 512 bytes), and contains some static values, the path of a tmpfile and a datafile. tmpfile is max MKIMAGE_MAX_TMPFILE_LEN (256) and datafile might be also this size. Having two very long pathname results in a truncation os the executed shell command, as the truncated datafile path will not be found. Redefine MKIMAGE_MAX_DTC_CMDLINE_LEN to "2 * MKIMAGE_MAX_TMPFILE_LEN + 35 for the parameters. This likely applies to the "-d" parameter, too. Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
generated by cgit (git 2.34.1) at 2025-01-24 16:45:39 +0000