summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-19gpio: stm32f7_gpio: handle node ngpiosPatrick Delaunay
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19dm: gpio: Convert stm32f7 driver to livetreePatrick Delaunay
Update the GPIO driver to support a live device tree. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19arm: armv7: solve issue for timer_rate_hz in arch timerPatrick Delaunay
The current value timer_rate_hz causes a problem with function timer_get_us() from lib time and then an issue with readx_poll_timeout() function. With corrected value for tbclk() = timer_rate_hz = CONFIG_SYS_HZ_CLOCK the weak functions in lib timer can be used: - get_timer() - __udelay() So the specific function in this file are removed. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19spl: add SPL_RESET_SUPPORTPatrick Delaunay
Add option to include RESET driver and uclass in SPL. That can be useful to handle IP reset with same driver in U-Boot and in SPL. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19tools/mkimage: add support for STM32 image formatPatrick Delaunay
STM32MP157 bootrom needs a specific header for first boot stage. This patch adds support of this header in mkimage. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19tools: env: Implement atomic replace for filesystemAlex Kiernan
If the U-Boot environment is stored in a regular file and redundant operation isn't set, then write to a temporary file and perform an atomic rename. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-03-19tools: env: Refactor write path of flash_io()Alex Kiernan
Extract write path of flash_io() into a separate function. This patch should be a functional no-op. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-03-19tools: env: Fix CamelCasing style violationAlex Kiernan
Replace HaveRedundEnv with have_redund_env to fix style violation. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-03-19tools: env: Pass through indentAlex Kiernan
Pass tools/env/fw_env.c through indent to correct style violations. This commit consists of only one non-whitespace change: tools/env/fw_env.c:549: error: do not use assignment in if condition Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-03-19SPL: Add signature verification when loading imageJun Nie
U-boot proper signature is not verified by SPL on most platforms even config SPL_FIT_SIGNATURE is enabled. Only fsl-layerscape platform support secure boot in platform specific code. So verified boot cannot be achieved if u-boot proper is loaded by SPL. This patch add signature verification to u-boot proper images when loading FIT image in SPL. It is tested on Allwinner bananapi zero board with H2+ SoC. Signed-off-by: Jun Nie <jun.nie@linaro.org>
2018-03-19Merge git://git.denx.de/u-boot-videoTom Rini
2018-03-19sunxi: Add DRAM_SUN8I_A83T kconfig entryJagan Teki
Add proper and simple kconfig option for dram_sun8i_a83t.c instead of using MACH type on Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19sunxi: Add DRAM_SUN8I_A33 kconfig entryJagan Teki
Add proper and simple kconfig option for dram_sun8i_a33.c instead of using MACH type on Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19sunxi: Add DRAM_SUN8I_A23 kconfig entryJagan Teki
Add proper and simple kconfig option for dram_sun8i_a23.c instead of using MACH type on Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19sunxi: Add DRAM_SUN9I kconfig entryJagan Teki
Add proper and simple kconfig option for dram_sun9i.c instead of using MACH type on Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19sunxi: Add DRAM_SUN4I kconfig entryJagan Teki
Add proper and simple kconfig option for dram_sun4i.c instead of using MACH type on Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19sunxi: add DRAM_SUN6I kconfigJagan Teki
Add proper and simple kconfig option for dram_sun6i.c instead of using MACH type on Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19sunxi: Add AXP_PMIC_BUS kconfig entryJagan Teki
Add simple and meaningful kconfig option for pmic_bus.c instead of using MACH type on Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19sunxi: Add SUN8I_RSB kconfig entryJagan Teki
Add simple and meaningful kconfig option for rsb.c instead of using MACH type on Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19sunxi: Use SUN6I_PRCM if usedJagan Teki
SUN6I_PRCM is also used for SUN8I and SUN9I, so select the same on respective MACH types. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19sunxi: Add SUN6I_P2WI kconfig entryJagan Teki
Add simple and meaningful kconfig option for p2wi.c instead of using MACH type on Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19sunxi: Add SUN6I_PRCM kconfig entryJagan Teki
Add simple and meaningful kconfig option for prcm.c instead of using MACH type on Makefile. PRCM (Power/Reset/Clock Management) is considered as a Multi-Functional Device, so used the same on Kconfig definition. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19board: Add display to STM32F746 SoC discovery boardyannick fertre
Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19stm32f7: board: add splash screenyannick fertre
Support several pixel format (8bits, 16bits, 24bits & 32bits). Add new file st_logo_data.h which contains logo stmicroelectronics_uboot_logo_8bit_rle.bmp. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19arm: dts: stm32: add display for STM32F746 disco boardyannick fertre
Enable the display controller, panel & backlight. Set panel display timings & set the RGB data bus. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19arm: dts: stm32: add ltdc for STM32F746Philippe CORNU
Add display controller node in device-tree. Signed-off-by: yannick fertre <yannick.fertre@st.com> [agust: rebased on master] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2018-03-19video: stm32: stm32_ltdc: set the blending factoryannick fertre
Set the blending factor regarding the pixel format Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: missing set of line interrupt positionyannick fertre
Set LIPCR (line interrupt position conf) register with line length. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: set rate of the pixel clockyannick fertre
pxclk is useless to set pixel clock. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: update file header & footeryannick fertre
Modified copyright & driver name. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: add resetyannick fertre
Add reset of LTDC display controller. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: exynos: remove redundant assignmentsHeinrich Schuchardt
No need to initialize variables if the next usage is an assignment. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19video, da8xx-fb: fix time out in wait_for_event()Heinrich Schuchardt
If an event does not occur the current coding stays in an endless loop. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19video: stb_truetype: simplify expressionHeinrich Schuchardt
Eliminate (x2 - x2) which is always zero. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19video: cfb_console: simplify logical constraintHeinrich Schuchardt
(A || !A && B) == (A || B) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-17usb: dwc2: Replace printf, pr_err by dev_info, dev_errPatrice Chotard
Replace printf() call by dev_info() and pr_err() by dev_err() Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17usb: dwc2: increase timeout in wait_for_chhltdChristophe Kerello
This patch increases timeout to 2s. It was seen on 2 USB devices (Verbatim STORE N GO 070B4AED0FB22358 and USB DISK 2.0 9000729BA41DDF40) that the request sense command takes between 1.3s and and 1.5s. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17usb: dwc2: disable external vbus supply when the device is removedChristophe Kerello
This patch adds an interface to disable the power in dwc2 driver. This new interface is called when the device is removed. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17usb: ohci-generic: replace pr_err() by dev_err()Patrice Chotard
As we get access to struct udevice, use dev_err() instead of pr_err(). Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17usb: ohci-generic: factorize PHY operationPatrice Chotard
Factorize PHY get/init/poweron and PHY poweroff/exit operations into separate function, it simplify the error path. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17usb: ohci-generic: handle phy power on/offPatrice Chotard
Add generic_phy_power_on() and generic_phy_power_off() calls to switch ON/OFF phy during probe and remove functions. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17usb: ehci-generic: replace pr_err() by dev_err()Patrice Chotard
As we get access to struct udevice, use dev_err() instead of pr_err(). Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17usb: ehci-generic: factorize PHY operationPatrice Chotard
Factorize PHY get/init/poweron and PHY poweroff/exit operations into separate function, it simplify the error path. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17usb: ehci-generic: handle phy power on/offPatrice Chotard
Add generic_phy_power_on() and generic_phy_power_off() calls to switch ON/OFF phy during probe and remove functions. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17usb: Remove unused ppc4xx EHCI host driverStefan Roese
ppc4xx support was removed some time ago. Lets remove the now unused EHCI driver and all its references for this platform as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Marek Vasut <marex@denx.de>
2018-03-17ubs: xhci-dwc3: Enable USB3 PHY when availableVignesh R
DWC3 USB3 controllers will need USB3 PHY to be enabled, in addition to USB2 PHY, to be functional. Therefore enable USB3 PHY when available. Signed-off-by: Vignesh R <vigneshr@ti.com>
2018-03-17usb: xhci-dwc3: Refractor PHY operations into separate functionVignesh R
Refractor PHY get/init/poweron and PHY poweroff/exit operations into separate function so that its easy to support multiple PHYs. Signed-off-by: Vignesh R <vigneshr@ti.com>
2018-03-17usb: xhci-dwc3: Power on USB PHY before usingVignesh R
It is wrong that expect .phy_init() to also power on the PHY. Therefore, explicitly, call generic_phy_power_on() after generic_phy_power_init() in order to power on PHY before using it. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-03-17usb: dwc2: Allow selection of data buffer sizeAlexey Brodkin
If we use hardware with very small RAM (let's consider just a couple of hundreds of kB but not megabytes) it is not super convenient to lose 64kB for statically allocated bufer which most probably won't be used as big as it is. Typically we'll have much shorter data packages to excahnge and in the worst case longer packets will be split on separate transactions. For those corner-cases user will be able to set his buffer size of choice via USB_DWC2_BUFFER_SIZE option in menuconfig. By default we'll use 64 kB as it was hard-coeded before so existing users shouldn't be affected at all. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Marek Vasut <marex@denx.de>
2018-03-16common: move init_helpers.h prototypes in init.hPatrick Delaunay
Merge init_helpers.h in the new file init.h with only prototypes for init_cache_f_r used in common/board_f.c Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
generated by cgit (git 2.34.1) at 2025-01-03 21:42:42 +0000