summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-09x86: Skip setting up MTRRs in slimbootloaderPark, Aiden
The setting up MTRRs have already been done in previous Slim Bootloader stages. Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09board: intel: Add new slimbootloader boardPark, Aiden
Add slimbootloader board to run U-boot as a Slim Bootloader payload - Add new board/intel/slimbootloader directory with minimum codes - Add slimbootloader configuration files - Add doc/board/intel/slimbootloader.rst Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: add slimbootloader board MAINTAINERS file] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: slimbootloader: Add a slimbootloader device treePark, Aiden
Add a new device tree which has very minimum nodes - x86 reset - x86 tsc_timer - x86 pci - Slim Bootloader serial Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: slimbootloader: Set TSC information for tsc_timerPark, Aiden
Slim Bootloader already calibrated TSC and provides it to U-Boot. Therefore, U-Boot does not have to re-calibrate TSC. Configuring tsc_base and clock_rate makes x86 tsc_timer driver bypass TSC calibration and use the provided TSC frequency. - Get TSC frequency from performance info hob - Set tsc_base and clock_rate for tsc_timer driver Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: slimbootloader: Add serial driverPark, Aiden
Slim Bootloader provides serial port info thru its HOB list pointer. All these HOBs are eligible for Slim Bootloader based board only. - Get serial port information from the serial port info HOB - Leverage ns16550 driver with slimbootloader specific platform data Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: slimbootloader: Add memory configurationPark, Aiden
Slim Bootloader provides memory map info thru its HOB list pointer. Configure memory size and relocation memory from the HOB data, and provide e820 entries as well. - Get memory size from the memory map info HOB - Set available top memory lower than 4GB for U-Boot relocation - Provide e820 entries from the memory map info HOB Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: Add a common HOB libraryPark, Aiden
FSP (CONFIG_HAVE_FSP) and Slim Bootloader (CONFIG_SYS_SLIMBOOTLOADER) consume HOB (CONFIG_USE_HOB) data from the each HOB list pointer. Add a common HOB library in lib/hob.c and include/asm/hob.h. Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: lib: fsp: Use EFI_GUID and efi_guid_tPark, Aiden
Use existing EFI_GUID and efi_guid_t instead of struct efi_guid. This is pre-work before making a common HOB library. - Change 'struct efi_guid' to efi_guit_t - Remove 'struct efi_guid' - Define GUIDs with EFI_GUID() macro - Use guidcmp() instead of compare_guid() - Remove compare_guid() Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested on MinnowMax Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: Add new slimbootloader CPU typePark, Aiden
This slimbootloader CPU type is to enable U-Boot as a payload which runs on top of Slim Bootloader (https://github.com/slimbootloader). The Slim Bootloader is designed with multi-stage architecture for the execution from reset vector to OS booting, and supports QEMU, Apollolake, Whiskeylake and Coffeelake platforms consuming Intel FSP (https://github.com/IntelFsp) for silicon initialization including CAR and memory initialization. The Slim Bootloader generates new HOB (Hand Off Block) which are serial port info, memory map info, performance data info and so on, and passes it to a Payload. U-Boot as a payload will use these HOB information for basic initialization such as serial console. As an initial commit, - Add CONFIG_SYS_SLIMBOOTLOADER to enable slimbootloader CPU type - Add new arch/x86/cpu/slimbootloader directory with minimum codes - Get hob_list pointer from Slim Bootloader Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: ich-spi: Convert driver to spi-mem opsBernhard Messerklinger
With the introduction of the new spi-mem model operations changed slightly. The new spi-mem operations make things a bit easier to handle for ich-spi flash interface. This patch converts the ich-spi driver by using spi-mem operations. Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested on Intel CrownBay and MinnowMax Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fix compiler warnings when building the driver for 64-bit] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09bios_emulator: remove stray breakHeinrich Schuchardt
Remove a stray break which suppresses some debug messages. Indicated by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: Avoid writing temporary asl files into the source treeSimon Glass
At present the iasl tool (Intel ACPI (Advanced Configuration and Power Interface) Source Language Compiler) is called in such a way that it uses the source directory for its temporary files. This means we end up with these files when building x86 boards: board/dfi/dfi-bt700/dsdt.aml board/dfi/dfi-bt700/dsdt.asl.tmp Update the code to put temporary files in the target directory instead. The iasl tool is quite confusing since it generates files with different extensions and does not allow these to be individually specified. Add some documentation to help with this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: remove dsdt.hex from 'make clean' rules and correct U-Boot spelling] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: tangier: Populate CSRT for shared DMA controllerAndy Shevchenko
Intel Tangier has a shared DMA controller that, according to Microsoft spec, has to be presented in CSRT table. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: acpi: Enable ACPI companion for Intel iDMA 32-bitAndy Shevchenko
ACPI has a capability to specify DMA parameters for DMA channel consumers. To enable this for Intel Edison, describe GP DMA device in ACPI table in order to get an ACPI handle to it in OS. This works in conjunction with CSRT, which must be in align with DSDT. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: acpi: Introduce a stub to generate CSRTAndy Shevchenko
Here is a stub function that generates an empty CSRT. If the target platform provides acpi_fill_csrt() function, it will be used to populate the table. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: acpi: Add CSRT descriptionAndy Shevchenko
Add CSRT [1] description as it provided in Linux kernel. [1]: http://www.uefi.org/sites/default/files/resources/CSRT%20v2.pdf Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: qemu: Fix non-working ramboot and nfsboot environment variablesBin Meng
With qemu-x86 starting to use config_distro_bootcmd, the pre-defined ramboot and nfsboot commands do not work any more. This is caused by undefined environment variable 'ramdiskaddr' that was previously set in CONFIG_EXTRA_ENV_SETTINGS but later CONFIG_EXTRA_ENV_SETTINGS was redefined for distro boot. Update the x86 generic CONFIG_EXTRA_ENV_SETTINGS to consider distro boot, and remove the one in qemu-x86.h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09qemu-x86: Use config_distro_bootcmdJoshua Watt
Converts qemu x86 machines to boot using distro_config. The intent is to allow u-boot in qemu to be maximally compatible with many boot methods without having to change the config. Previously, u-boot would only boot in a very limited set of circumstances where there was a /boot/vmlinuz on scsi 0:3 with no ramdisk. Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: convert doc updates to reST] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: edison: Enable SD slotAndy Shevchenko
Enable SD slot on Intel Edison platform. By default firmware doesn't put device on active state. Thus, we have to do this explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09Merge tag 'mmc-8-9' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- mmc test fix - sdhci driver fix
2019-08-09Merge tag 'u-boot-rockchip-20190809' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add rk3399 boards Khadas Edge/-V/-Captain - Add fully souce code support for rk3328 including TPL/DRAM init - Enable boot from eMMC for rk3399 rock960/ficus boards - turn on the IO supply for dw_mmc
2019-08-09mmc: tangier_sdhci: fix uninitialized pointer deref on probePeng Fan
Commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-09mmc: sdhci-cadence: fix uninitialized pointer deref on probePeng Fan
Commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-09mmc: s5p: fix uninitialized pointer deref on probePeng Fan
Commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-09mmc: pci: fix uninitialized pointer deref on probePeng Fan
Commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-09mmc: msm_sdhci: fix uninitialized pointer deref on probePeng Fan
Commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-09mmc: bcm: fix uninitialized pointer deref on probePeng Fan
Commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Matthias Brugger <mbrugger@suse.com> Cc: Thomas Fitzsimmons <fitzsim@fitzsim.org> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-09mmc: atmel_sdhci: fix uninitialized pointer deref on probePeng Fan
Commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-08-09test/py: Fix MMC/SD block write test dependencyMichal Simek
Test is using random command which has own Kconfig symbol CMD_RANDOM which already depends on CMD_MEMORY. That's why replace cmd_memory by cmd_random. Fixes: 09da18deab8b ("test/py: add MMC/SD block write test") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-08-09mmc: zynq_sdhci: fix uninitialized pointer deref on probeMatwey V. Kornilov
Since commit 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field. Move the mmc field initialization before sdhci_setup_cfg() call to avoid crash on mmc pointer dereference. [this patch is based on commit 41a9fab8dac8 ("mmc: mv_sdhci: fix uninitialized pointer deref on probe") by Baruch Siach] Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask") Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu102/zc706)
2019-08-09mmc: Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selectedFaiz Abbas
Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selected as is being done for the U-boot case. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-08-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Remove unused bcm2835 watchdog driver (still non-DM) - Cosmetic fixup of mtk_wdt.c
2019-08-08fastboot: Remove "bootloader-version" variableSam Protsenko
As per [1], there is no such fastboot variable as "bootloader-version". Only "version-bootloader" is supported. Let's reflect this and not confuse users further. [1] https://android.googlesource.com/platform/system/core/+/refs/tags/android-q-preview-4/fastboot/README.md Fixes: 3aab70afc531d1 ("usb/gadget: add the fastboot gadget") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-08-08fastboot: getvar: Add "is-userspace" variableSam Protsenko
As per documentation [1], Android-Q requires for bootloader to provide "is-userspace" variable. "no" value should be always returned. This patch implements this fastboot variable. [1] https://android.googlesource.com/platform/system/core/+/refs/tags/android-q-preview-4/fastboot/README.md Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-08-08usb: gadget: f_dfu.c: fix memory leakRalph Siemsen
dfu_prepare_function() allocates N+1 descriptor header structures, the last one being the "DFU Functional Descriptor". dfu_unbind() handles de-allocation, but fails to free the final one (eg. "DFU Functional Descriptor"), leading to memory leak. Fixed by incrementing counter, as in dfu_prepare_function(). Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
2019-08-08thor: fix crash after usb initialization failureMarek Szyprowski
Registration of USB download gadget might fail for various reasons, so add a check for g_dnl_register() funtion return value. Without this fix, thor_init() will try to access the registered gadget structures resulting in NULL pointer dereference issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2019-08-08fastboot: Remove "slot-suffixes" variableSam Protsenko
"slot-suffixes" variable was dropped in fastboot tool (in [1]). Let's track AOSP/master and drop this variable in U-Boot as well. [1] https://android.googlesource.com/platform/system/core/+/42b18a518bac85c3eea14206f6cbafbd1e98a31f Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [lukma: Remove getvar_slot_suffixes() declaration] Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-08-08usb, ohci, pci: add DM support for PCI-based OHCI USB controllerHeiko Schocher
add new DM based PCI driver ohci-pci for PCI-based OHCI USB support. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci: add warning if none on pci foundHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci-hcd: set OHCI_USE_NPS if DM_PCIHeiko Schocher
set OHCI_USE_NPS if DM_PCI is enabled. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci: fix ohci swap register accessHeiko Schocher
commit 57faca19a82f ("drivers: USB: OHCI: allow compilation for 64-bit targets") broke ohci support for the mpc85xx based socrates board, as it removed volatile keyword from ohci_readl/writel. Fix this so usb works again on socrates board. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08usb, ohci-hdc: fix warning 'ohci_pci_ids' defined but not usedHeiko Schocher
var ohci_pci_ids is only used if DM_USB is not enabled. So define this varaible only if !CONFIG_IS_ENABLED(DM_USB) Signed-off-by: Heiko Schocher <hs@denx.de>
2019-08-08ARM: da850-evm: Enable the USB PHY and MUSB DriverAdam Ford
This patch will enable the MUSB driver to support mass storage devices connected to the OTG port in host mode. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-08usb: musb-new: Add support for da8xx-musbAdam Ford
With the recently added phy driver, this patch will enable the musb driver on the da8xx to operate in host mode. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-08phy: Add support for phy-da8xx-usbAdam Ford
In preparation for supporting the musb driver, this patch adds support for the usb phy associated with the musb driver. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-07test/py: avb: Move AVB test to android dirSam Protsenko
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-08-07Merge branch '2019-08-07-master-imports'Tom Rini
- Misc Android / AVB bugfixes (including updating the header from Android). - MediaTek updates - Other assorted bugfixes.
2019-08-07Update include/android_image.h from AOSPAlex Deymo
This takes the latest changes from AOSP from the file include/bootimg/bootimg.h from the repository: https://android.googlesource.com/platform/system/tools/mkbootimg and update the U-Boot version with the latest changes. This file keeps the changes from AOSP to a minimum: * Comments were converted from C++ to C style. * Code inside __cplusplus #ifdef blocks were removed. * C++11 struct extensions replaced with a single struct. Signed-off-by: Alex Deymo <deymo@google.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-08-07common: image-android-dt: Fix logic in print fdt info routineSam Protsenko
Do not attempt to print fdt info if root node wasn't found. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-08-07fit: Do not automatically decompress ramdisk imagesJulius Werner
The Linux ramdisk should always be decompressed by the kernel itself, not by U-Boot. Therefore, the 'compression' node in the FIT image should always be set to "none" for ramdisk images, since the only point of using that node is if you want U-Boot to do the decompression itself. Yet some systems populate the node to the compression algorithm used by the kernel instead. This used to be ignored, but now that we support decompression of all image types it becomes a problem. Since ramdisks should never be decompressed by U-Boot anyway, this patch adds a special exception for them to avoid these issues. Still, setting the 'compression' node like that is wrong in the first place, so we still want to print out a warning so that third-party distributions doing this can notice and fix it. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
generated by cgit (git 2.34.1) at 2025-02-04 07:11:59 +0000