summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-19ARM: mach-omap2: Kconfig: Make SYS_MPUCLK dependent on AM33XXAdam Ford
This value is unly used in arch/arm/mach-omap2/am33xx/ clock_am33xx.c, so let's make it dependent on AM33XX since that is the only way this file gets compiled into the code according to the Makefile. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Fix symbol name] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-19arm: lpc32xx: remove phantom CONFIG_LPC32XX_SDRAM_ config optionVladimir Zapolskiy
The option has never existed and config whitelist script accumulates it from a comment block, wipe it out from the source code. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19work_92105: remove unused CONFIG_SPL_NAND_BOOT configuration optionVladimir Zapolskiy
The option is unused, SPL image gets a wanted boot device by standard spl_boot_device() call. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19work_92105: remove unused CONFIG_LPC32XX_SPL configuration optionVladimir Zapolskiy
The CONFIG_LPC32XX_SPL option from board include file has never been used, it is safe to remove it. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19Makefile: add LPC32xx precondition for building platform imagesVladimir Zapolskiy
To prevent accidental build failures the change converts a number of NXP LPC32xx specific image targets to be conditionally dependent on target build configuration. The wrapped image targets always contain a U-Boot SPL binary and the images are supposed to be directly flashed on a NAND flash device for read access by LPC32xx NAND MLC controller. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19arm: lpc32xx: add CONFIG_ARCH_LPC32XX build optionVladimir Zapolskiy
The explicit arch specific build symbol allows to group supported boards, generalize common config options and it will serve as a dependency for platform only drivers. Two related board defconfigs are resynced after the change. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-10-18ARM: rmobile: Drop PRR syscon driverMarek Vasut
The PRR syscon driver is available too late for Multi DTB build of U-Boot. Replace it with simple check whether a platform is Gen3 or not and produce an address of the PRR. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18ARM: dts: rmobile: Build -u-boot variants of DTsMarek Vasut
Build the -u-boot variants of the device trees so they can be included in Multi-DTB fitImage, which in turn allows us to build single U-Boot image for multiple boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18ARM: dts: rmobile: r8a77990: Add USB2.0(EHCI) DT nodes on EbisuHiroyuki Yokoyama
Add device tree nodes for USB2.0(EHCI) on R-Car E3 Ebisu board. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Fix module clock controls refer status on Gen3Hiroyuki Yokoyama
When referring to the MSTPSR register, it contains the clock status of SYS, RT, SECURE, and controlling SMSTPCR using this value has the problem of being affected by the RT and SECURE status.This patch changes the reference register to SMSTPCR. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Enable cache command on Gen3Hiroyuki Yokoyama
This patch enables the cache command, mostly for convenience of testing. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18ARM: rmobile: Tidy up SYSC_PWRx define of 3DG on Gen3Hiroyuki Yokoyama
Tidy up unused definition related to power control of 3DG. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: salvator-x: Remove GSX clock force supplyHiroyuki Yokoyama
GSX clock force supply code is unnecessary at U-Boot, because GSX clock control is supported at the kernel driver. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Remove Watchdog and CPG settings on Gen3Hiroyuki Yokoyama
This code is unnecessary, because these registers are set by the initial program loader (IPL). Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Remove TMU0/TMU1 settings on Gen3Hiroyuki Yokoyama
U-Boot uses ARM generic timer, TMU0 and TMU1 are not used, remove them. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Remove console parameter from bootargs on Gen3Hiroyuki Yokoyama
This patch removes 'console=' argument, because kernel uses stdout-path as parameter. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Fix CPGWPR Address define and Settings on Gen3Hiroyuki Yokoyama
This patch fixes the write-protect control of CPG. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-17Merge tag 'signed-efi-2018.11' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-10-17 A few bug fixes for the 2018.11 release: - Fix block seeking on 32bit - Fix execution with DEBUG set - Fix a few Coverity found bugs - Fix warnings Heinrich Schuchardt (13): efi_loader: fix relocation on x86_64 efi_loader: correct signature of GetPosition, SetPosition efi_loader: execute efi_save_gd() first efi_loader: efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES, ...) efi_loader: error handling in read_console() efi_loader: return type efi_console_register() efi_loader: superfluous statement in is_dir() efi_loader: memory leak in efi_set_variable() efi_loader: remove lcd.h from efi_net.c arm: do not include efi_loader.h twice efi_loader: fix typo in efi_boottime.c efi_selftest: creating new handle in controller test efi_loader: efi_dp_get_next_instance() superfluous statement Tom Rini (2): efi_loader: Fix warning in efi_load_image() fs: fat: Fix warning in normalize_longname()
2018-10-16efi_loader: efi_dp_get_next_instance() superfluous statementHeinrich Schuchardt
Remove a superfluous statement in efi_dp_get_next_instance(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_selftest: creating new handle in controller testHeinrich Schuchardt
When the last protocol interface is uninstalled the handle is deleted but this does not set the value of the handle to NULL. To create a new handle with OpenProtocolInterface the value of the handle must be NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16Merge git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2018.11-rc2-v2 FPGA: - Fix SPL fpga loading from FIT ARM64: - Fix gic accesses in EL2/EL1 Xilinx: - Add dlc20 board support - Add Versal board support - Sync defconfigs - Enable MP via Kconfig - Add missing efuse node - Enable CDC for zcu100 cmd: - Fix kgdb Kconfig dependency
2018-10-16cmd: kgdb: Enable kgdb only for PPCMichal Simek
Only PPC supports this option that's why there should be proper dependency setup via Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: zynqmp: Enable MP by default via KconfigMichal Simek
Simplify defconfig for ZynqMP but keep option not to enable it for mini targets. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: zynqmp: Add new command for TCM initializationSiva Durga Prasad Paladugu
This patch adds new zynqmp command "zynqmp tcminit mode" to initialize TCM. TCM needs to be initialized before accessing to avoid ECC errors. This new command helps to perform the same. It also makes tcm_init() as global and uses it for doing the TCM initialization. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: zynqmp: Move TCM initialization to a separate routineSiva Durga Prasad Paladugu
This patch moves TCM initialization to a separate routine to make it modular and can be reused if required. It also prints warning message now as it writes to TCM. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: versal: Add Xilinx Versal Virtual QEMU boardMichal Simek
Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16net: gem: Do not setup any clock for Xilinx SoC VersalMichal Simek
Xilinx SoC Versal is using fixed clock where setting rate is not supported. That's why workaround the driver till real clock driver is supported. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: versal: Add support for new Xilinx Versal ACAPsMichal Simek
Xilinx is introducing Versal, an adaptive compute acceleration platform (ACAP), built on 7nm FinFET process technology. Versal ACAPs combine Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent Engines with leading-edge memory and interfacing technologies to deliver powerful heterogeneous acceleration for any application. The Versal AI Core series has five devices, offering 128 to 400 AI Engines. The series includes dual-core Arm Cortex™-A72 application processors, dual-core Arm Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more than 1,900 DSP engines optimized for high-precision floating point with low latency. The patch is adding necessary infrastructure in place without enabling platform which is done in separate patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16efi_loader: fix typo in efi_boottime.cHeinrich Schuchardt
%s/conncected/connected/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16fs: fat: Fix warning in normalize_longname()Tom Rini
As observed with clang: fs/fat/fat_write.c:1024:13: warning: comparison of constant 128 with expression of type 'char' is always false [-Wtautological-constant-out-of-range-compare] if ((0x80 <= c) && (c <= 0xff)) ~~~~ ^ ~ fs/fat/fat_write.c:1024:25: warning: comparison of constant 255 with expression of type 'char' is always true [-Wtautological-constant-out-of-range-compare] if ((0x80 <= c) && (c <= 0xff)) ~ ^ ~~~~ Fixes: 25bb9dab14f4 ("fs: fat: check and normalize file name") Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_loader: Fix warning in efi_load_image()Tom Rini
As observed with clang: lib/efi_loader/efi_boottime.c:1624:7: warning: variable 'info' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (ret != EFI_SUCCESS) ^~~~~~~~~~~~~~~~~~ lib/efi_loader/efi_boottime.c:1653:7: note: uninitialized use occurs here free(info); ^~~~ lib/efi_loader/efi_boottime.c:1624:3: note: remove the 'if' if its condition is always false if (ret != EFI_SUCCESS) ^~~~~~~~~~~~~~~~~~~~~~~ lib/efi_loader/efi_boottime.c:1602:31: note: initialize the variable 'info' to silence this warning struct efi_loaded_image *info; ^ = NULL Rather than change how we unwind the function it makes the most sense to initialize info to NULL so that we can continue to pass it to free(). Fixes: c982874e930d ("efi_loader: refactor efi_setup_loaded_image()") Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16arm: do not include efi_loader.h twiceHeinrich Schuchardt
We should not include the same include twice. Fixes: 99b8db7291ce ("arm: print information about loaded UEFI images") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_loader: remove lcd.h from efi_net.cHeinrich Schuchardt
Remove superfluous include. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_loader: memory leak in efi_set_variable()Heinrich Schuchardt
Do not leak native_name if out of memory. This addresses CoverityScan CID 184095. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_loader: superfluous statement in is_dir()Heinrich Schuchardt
When is_dir() is called we have already execute set_blk_dev(fh). So don't call it again. This fixes CoverityScan CID 184093. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_loader: return type efi_console_register()Heinrich Schuchardt
Use a return type that can encompass the return value. This fixes CoverityScan CID 184090. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_loader: error handling in read_console()Heinrich Schuchardt
getc() might return an error code. Avoid an incorrect converison to Unicode. This addresses CoverityScan CID 184087. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_loader: efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES, ...)Heinrich Schuchardt
The first parameter of efi_allocate_pool is a memory type. It cannot be EFI_ALLOCATE_ANY_PAGES. Use EFI_BOOT_SERVICES_DATA instead. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_loader: execute efi_save_gd() firstHeinrich Schuchardt
If DEBUG is defined we may be calling EFI_CALL already during the initialization of the EFI subsystem. We must make sure efi_save_gd() has already been called at that moment. Anyway it is better to have this call in one location instead of three. This fixes an illegal memory access occurring since 4e6b5d6503ce ("efi_loader: create root node") with DEBUG = 1. Fixes: 4e6b5d6503ce ("efi_loader: create root node") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_loader: correct signature of GetPosition, SetPositionHeinrich Schuchardt
The UEFI spec requires that file positions are passed as u64 in GetPosition() and SetPosition(). Check if the file handle points to a directory in GetPosition(). Provide a unit test for GetPosition() and SetPosition(). Fix Coverity warning CID 184079 (CONSTANT_EXPRESSION_RESULT). Add comments. Fixes: b6dd57773719 ("efi_loader: use correct types in EFI_FILE_PROTOCOL") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_loader: fix relocation on x86_64Heinrich Schuchardt
Currently the relocation of the EFI runtime on x86_64 fails. This renders the EFI subsystem unusable. The ELF relocation records for x86_64 contain an addend field. Always write the function name into error messages related to the EFI runtime relocation. Break an excessively long line. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16arm64: gic: Do gicv3 secure initialization based on EL levelMichal Simek
Do gic cpu initialization based on EL level which u-boot enters. U-Boot can't access EL3 regs when runs in EL2/EL1, etc. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: zynqmp: Enable CDC ethernet gadget for zcu100/Ultra96Michal Simek
Ethernet is not present on this board that's why there are two other options how to wire the board to ethernet. The first is asix_eth usb host converter which is already enabled by default. The second option is to use USB CDC/RNDIS ethernet gadget. This patch is enabling CDC which is working with Linux. With new bind/unbind command there is no need to call usb_ether_init() from platform code and use for example these commands: bind /amba/usb0@ff9d0000/dwc3@fe200000 usb_ether dhcp unbind /amba/usb0@ff9d0000/dwc3@fe200000 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16xilinx: Sync defconfigs with current KconfigMichal Simek
There are some inconsistencies which should be fixed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm: zynq: Add efuse node for Zynq-7000S devicesMichal Simek
Add access to efuse for Zynq-7000S device detection. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm: zynq: Add support for DLC20 boardMichal Simek
Xilinx DLC20 has I2C0 with EEPROM(1KB), UART1, GPIO, SD0 (EMMC 4GB), USB0 device, ENET0, QSPI (16MB) and DDR(two of 256MB each). Boards have mix of Winbond/ST QSPIs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm: zynq: Enable FIT fpga loading in SPL for zc706Michal Simek
Enable loading FPGA from FIT image in SPL. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16spl: fpga: Implement fpga bistream loading with fpga_loadMichal Simek
This patch partially reverts: "spl: fit: Add support for loading FPGA bitstream" (sha1: 26a642238bdecc53527142dc043b29e21c5cc94c) There shouldn't be a need to call private spl_load_fpga_image function because the whole sequence should be already handled by fpga framework. If there is missing loading bistream by chunks it should be done via fpga framework instead of having private hooks. Also spl_load_fpga_image() weak function is not used anywhere and opening a way for not reviewed hacks out of mainline U-Boot is not the right way to go. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini
generated by cgit (git 2.34.1) at 2024-12-29 09:49:38 +0000