summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-19disk: part_dos: Allocate at least one block size for mbrFaiz Abbas
The blk_dread() following the mbr allocation reads one block from the device. This will lead to overflow if block size is greater than the size of legacy_mbr. Fix this by allocating at least one block size. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-09-19kconfig: doc: Update comment regarding CONFIG_IS_ENABLED(FOO) for TPLLukasz Majewski
This patch adds some commit info for CONFIG_IS_ENABLED(FOO) when used in TPL context. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-09-19doc: fix: Replace SPL_OF_PLATDATA with OF_PLATDATA in examplesLukasz Majewski
The of-plat.rst file till this change has been using This is at best misleading as SPL_OF_PLATDATA is always defined when we want to use this SPL tinification feature (also in U-Boot proper). As a result the OF_PLATDATA SPL specific code is also compiled in when U-Boot proper is build. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-09-19rtc: ds3231/ds3232: fix coding styleBiwen Li
The patch fixes coding style Signed-off-by: Biwen Li <biwen.li@nxp.com>
2019-09-19travis.yml: change Ubuntu version to xenialRamon Fried
trusty is getting old, move to xenial (16.04) to get updated gcc and other tools. Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
2019-09-19rockchip: config: evb-rk3288: enable SPL_STACK_RKever Yang
We need a new STACK in SDRAM instead of SRAM so that the EMMC controller can work properly. The EMMC/SD controller's master is not able to access SRAM area, it can only access DRAM area. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19rockchip: evb-rk3288: Drop explicit SPL_TEXTKever Yang
SPL_TEXT_BASE is 0x0 by default, based on the kconfig definition move in below commit. "configs: move CONFIG_SPL_TEXT_BASE to Kconfig" (sha1: f89d6133eef2e068f9c33853b6584d7fcbfa9d2e) So, don't define it explicitly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19configs: rk3288: Increase bootm lengthJagan Teki
Increase bootm length to 64MB satisfy max gunzip size, even other rockchip and know SoC are following same length check. Reported-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19rockchip: rk3288-tinker: Attach missing peripherals at SPLMichael Trimarchi
Tinker board needs to mux all the sdmmc gpio and activate the regulator connected to bank 7. Remove all the bank that are not in use and mark them as dm,spl so-that it would initialize at SPL. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19configs: tinker: Enable SDRAM, SPL stackJagan Teki
SPL sets up SDRAM while in its board_init_f() function, it is possible for the stack to move there before board_init_r() is reached. So it is required to reserve the stack for SDRAM, with a proper location and size otherwise any operations during SPL handoff would leads to failure. On, this particular context tinker-rk3288 SPL is failing to launch U-Boot proper on SDRAM due to lack of stack. U-Boot SPL 2019.10-rc3-00297-g5ba8b12543 (Sep 12 2019 - 08:50:36 +0530) Trying to boot from MMC1 spl: mmc init failed with error: -110 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### So, enable SPL_STACK_R_ADDR and it's related-config items for SDRAM, SPL stack to setup properly. Reported-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19configs: tinker: Drop explicit SPL_TEXTJagan Teki
SPL_TEXT_BASE is 0x0 by default, based on the kconfig definition move in below commit. "configs: move CONFIG_SPL_TEXT_BASE to Kconfig" (sha1: f89d6133eef2e068f9c33853b6584d7fcbfa9d2e) So, don't define it explicitly. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19rockchip: spi-boot-order: Trival fix to newline missingJagan Teki
newline \n was missed in fdt_path_offset, error loop. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19ram: rk3288: Initialize dram for TPL buildsJagan Teki
Few of the rk3288 boards like tinker, vyasa are using TPL, SPL bootchain so the dram initialization must needed during TPL stage. So add proper ifconstruct to satisfy both TPL, SPL and SPL-only bootchain boards. This eventually fixing TPL to SPL handoff, otherwise missing dram initilaztion at TPL stage would leads to SPL hang. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19configs: vyasa-rk3288: Fix SPL_TEXT_BASEJagan Teki
The initial Vyasa-rk3288 TPL implementation is to reuse the SPL_TEXT_BASE for TPL and SPL as 0x0 and 0xff704000 respectively. But the below commit implements the reverse way of using TEXT_BASE's like 0xff704000 for TPL and 0x0 for SPL and which indeed update the SPL_TEXT_BASE for vyasa-rk3288 board. "rockchip: Kconfig: enable TPL support for rk3328" (sha1: 3f47db0275e0f1c1e89d8f13f8b4cdc86b1038ca) So, fix by dropping the legacy SPL_TEXT_BASE and it will reassign 0x0 by default based on Kconfig definition. Reported-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19rockchip: rk3288: vyasa: Drop ROCKCHIP_BROM_HELPER selectionJagan Teki
ROCKCHIP_BROM_HELPER is selected as if TPL/SPL ROCKCHIP_BACK_TO_BROM has been defined, so drop the explicit enablement for vyasa board. This change is supposed to missed during config move to other locations, and missed to drop the same. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19configs: rockpro64-rk3399: Enable CONFIG_MISC_INIT_R and ROCKCHIP_EFUSEHugh Cole-Baker
This enables reading the cpuid from e-fuse, and deriving a static MAC address from it. Without this, the ethernet interface on the rockpro64 can't be used to boot. Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-16Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add emmc hs200 support - Few bug fixes related to serdes, I2C, ethernet, etc
2019-09-16Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- fix mvebu_a3700_spi clock prescale (Marek Behún) - unmark MXS_SPI, DEPRECATED (Lukasz) - add spi_write_then_read (Jagan) - fix SST26* flash ICs (Eugeniy) - fix soft_spi data abort (Christophe)
2019-09-16doc: driver-model: Update SPI migration statusJagan Teki
Update SPI drivers, driver model conversion status for v2019.10 release. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16mtd: spi-nor: enable protection ops for SST26 flash seriesEugeniy Paltsev
Commit c4e8862308d4 (mtd: spi: Switch to new SPI NOR framework) performs switch from previous 'spi_flash' infrastructure without proper testing/investigations which results in a regressions for SST26 flash series. Enable protection ops for SST26 flash series which were previously enabled by Commit 3d4fed87a5fa (mtd: sf: Add support of sst26wf* flash ICs protection ops) Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16mtd: spi-nor: add missing SST26* flash IC protection opsEugeniy Paltsev
Commit c4e8862308d4 (mtd: spi: Switch to new SPI NOR framework) performs switch from previous 'spi_flash' infrastructure without proper testing/investigations which results in a regressions for SST26 flash series. Add missing SST26* flash IC protection ops which were introduced previously by Commit 3d4fed87a5fa (mtd: sf: Add support of sst26wf* flash ICs protection ops) Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16mtd: spi: Drop sf.cJagan Teki
spi_write_then_read, will manage to do the respective spi_xfer based on the tx_buf, rx_buf so drop the legacy spi_flash_read/write/cm code. Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16mtd: spi_dataflash: Use spi read then writeJagan Teki
Now, we have spi_write_then_read routine that would handle spi_xfer handling based on the tx_buf and rx_buf parameters. So, replace individual flash read/write/cmd transfer call with spi_write_then_read. Cc: Egnite GmbH <info@egnite.de> Cc: Daniel Gorsulowski <daniel.gorsulowski@esd.eu> Cc: Ilko Iliev <iliev@ronetix.at> Cc: Marek Vasut <marex@denx.de> Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Cc: Alison Wang <alison.wang@nxp.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16spi: Add spi_write_then_readJagan Teki
Add support for SPI synchronous write followed by read, this is common interface call from spi-nor to spi drivers. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2019-09-16spi: Kconfig: Unmark DEPRECATED for MXS_SPILukasz Majewski
MXS_SPI driver now partially converted into driver-model, so unmark the DEPRECATED option for the same. Signed-off-by: Lukasz Majewski <lukma@denx.de> [jagan: update the commit message] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16spi: soft_spi: Fix data abort if slave is not probedChristophe Kerello
In case spi_get_bus_and_cs callback is used, spi bus is first probed then slave devices are probed. To avoid a data abort in soft_spi probe function, we need to check that (slave != NULL). If slave is NULL, cs_flags and clk_flags will be initialized with respectively GPIOD_ACTIVE_LOW and 0. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16spi: mvebu_a3700_spi: Fix clock prescale computationMarek Behún
The prescaler value computation can yield wrong result if given 0x1f at the beginning: the value is computed to be 0x20, but the maximum value the register can hold 0x1f, so the actual stored value in this case is 0, which is obviously wrong. Set the upper bound of the value to 0x1f with the min macro. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-15Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2019-09-14Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- Assorted bugfixes
2019-09-14Merge branch '2019-09-13-ti-imports'Tom Rini
- Assorted K3 bugfixes. - Assorted DM enablements, dead code removal.
2019-09-14sh: r2dplus: Enable DHCP commandMarek Vasut
Enable the "dhcp" command as a minor convenience. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-14sh: r2dplus: Fix missing PCI rangeMarek Vasut
Add missing PCI range for translating DRAM to bus addresses. This fixes e.g. PCI NIC interface and allows network to work in QEMU. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-14sh: Fix SH4 build with GCC versions without -m4-nofpuMarek Vasut
Pass -m4 instead of -m4-nofpu to GCC versions which do not support the -m4-nofpu option. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-14sh: Fix incorrect linking with new binutilsMarek Vasut
Since binutils 2.30 , the resulting U-Boot binary was incorrectly linked against address 0 instead of text base, fix it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-13configs: am65x_hs_evm: Use FIT images when booting HS devicesAndrew F. Davis
HS devices use the FIT post processing step to authenticate boot images. Set the configured boot command to load FIT by default. Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-09-13configs: ti: Add environment support commands for FIT loadingAndrew F. Davis
Some parts of these commands can be reused, add them to common files. Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-09-13ARM: dts: dra74x: Fix iodelay configuration for mmc3Faiz Abbas
According to the latest am572x[1] and dra74x[2] data manuals, mmc3 default, hs, sdr12 and sdr25 modes use iodelay values given in MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is selected and correct iodelay values are configured. [1] http://www.ti.com/lit/ds/symlink/am5728.pdf [2] http://www.ti.com/lit/ds/symlink/dra746.pdf Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-09-13arm: k3: Use get_ti_sci_handle() where ever possibleLokesh Vutla
Instead of calling uclass apis everywhere, use get_ti_sci_handle() when ever ti_sci is needed. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-13arm: k3: Fix getting ti_sci handleLokesh Vutla
API get_ti_sci_handle() is relying on the device-tree node name to be "dmsc" for probing the ti_sci device. But with the introduction of debug messages for dmsc, the node name changed to dmsc@44083000. Because of this ti_sci is never probed cause a boot failure. Instead of relying on device-tree node name, use the first available firmware node for probing ti_sci. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-13ARM: omapl138_lcdk: Enable PinctrlAdam Ford
The single pinctrl supports the da8xx, so this patch enables pinctrl in U-Boot. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-13ARM: omapl138_lcdk: Enable DM_GPIO and DM and GPIO CommandsAdam Ford
The da8xx GPIO driver is available with DM_GPIO support. This patch enables the CMD_GPIO, CMD_DM, and DM_GPIO and DA8XX_GPIO. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-13ARM: omapl138_lcdk: Disable SPL_DM_USBAdam Ford
The USB was just recently enabled, so it is unlikely anyone is using it in SPL, so this patch removes it from SPL to further reduce the SPL code size. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-13ARM: omapl138_lcdk: Remove dead codeAdam Ford
The header it littered with #ifdefs and #defines and that appear to be legacy associations to the older da850-evm and in some cases obsolete with either Kconfig or DM migrations. This patch removes these legacy references. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-13arm: am437x: cm-t43: Enable DM for MMC, USB, SPI, SPI_FLASH, enable BLKSuniel Mahesh
Enable driver model for USB, MMC, SPI and SPI_FLASH. Also enable BLK. This will remove the following compile warnings: ===================== WARNING ====================== This board does not use CONFIG_DM_MMC. Please update the board to use CONFIG_DM_MMC before the v2019.04 release. ==================================================== ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. ==================================================== ===================== WARNING ====================== This board does not use CONFIG_DM_SPI_FLASH. Please update the board to use CONFIG_SPI_FLASH before the v2019.07 release. ==================================================== Target was compile tested, build was clean. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-09-13arm: am437x: cm-t43: Add device tree, enable OF_CONTROLSuniel Mahesh
Add device tree from Linux for driver model conversion and enable OF_CONTROL. This will remove the following compile warning: ================================================== Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument =================================================== Target was compile tested, build was clean. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-09-13soc: ti: k3-navss-ringacc: fix k3_nav_ringacc_ring_reset_dmaVignesh Raghavendra
In case dma_ring_reset_quirk is not set the k3_ringacc_ring_reset_dma will just exit without ring reset. Fix it, by adding ring reset call in case dma_ring_reset_quirk is not. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-09-13MAINTAINERS: Change fsl-qoriq, mpc86xx, mpc85xx maintainersPriyanka Jain
Change maintainers to Priyanka Jain for fsl-qoriq, mpc85xx Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Acked-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-09-12Merge tag 'efi-2019-10-rc4-4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc4 (4) Fixes for the EFI_FILE_PROTOCOL: * correctly iterate over directories * correct Unicode conversion of file names * parameter checks
2019-09-12lx2160: Correct serdes frequency print.Meenakshi Aggarwal
Suffix serdes frequency print with MHz Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12armv8: ls1028a: Updated serdes configuration for 0x13BBHou Zhiqiang
In SerDes protocol 0x13BB, lane C was erroneously assigned to PCIE1, this is now updated to PCIE2 Fixes: 36f50b75238e ("armv8: ls1028a: Add other serdes protocal support") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit (git 2.34.1) at 2025-01-01 20:30:00 +0000