summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-14core: ofnode: Fix mem leak in error pathMario Six
A newly created property is currently not freed if a name could not be allocated. This patch fixes the resulting memory leak in the error patch. Reported-by: Coverity (CID: 184085) Fixes: e369e58df79c ("core: Add functions to set properties in live-tree") Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-11-14misc: Add IHS FPGA driverMario Six
Add a driver for gdsys IHS (Integrated Hardware Systems) FPGAs, which supports initialization of the FPGA, as well as information gathering. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-11-14misc: Add gdsys_soc driverMario Six
This patch adds a driver for the bus associated with a IHS FPGA. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-11-14misc: Sort Makefile entriesMario Six
Makefile entries should be sorted. Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2018-11-14regmap: Improve error handlingMario Six
ofnode_read_simple_addr_cells may fail and return a negative error code. Check for this when initializing regmaps. Also check if both_len is zero, since this is perfectly possible, and would lead to a division-by-zero further down the line. Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-11-14regmap: Add documentationMario Six
Document the regmap_alloc() function. Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-11-14regmap: Fix documentationMario Six
The documentation in regmap.h is not in kernel-doc format. Correct this. Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-11-14test: regmap: Increase size of syscon0 memoryMario Six
The upcoming changes to the regmap interface will contain a proper check for plausibility when reading/writing from/to a register map. To still have the current tests pass, increase the size of the memory region for the syscon0 device, since one of the tests reads and writes beyond this range. Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-11-14timer: Sort Kconfig driver entriesBin Meng
This is currently out of order. Sort it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14test: dm: core: Add a test case for driver marked with DM_FLAG_PRE_RELOC flagBin Meng
Now that we fixed the pre-relocation driver binding for driver marked with DM_FLAG_PRE_RELOC flag, add a test case to cover that scenario. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14dm: core: Mirror the chosen node parse logic in the livetree scanningBin Meng
Commit f2006808f099: ("dm: core: parse chosen node") added a logic to parse the chosen node during dm_scan_fdt_node(), but unfortunately it missed adding the same logic in dm_scan_fdt_live(). This mirrors the logic in the livetree version. The weird thing is that commit f2006808f099 did update the test case to test such logic, but even if I reset to that commit, the test case still fails, and I have no idea how it could pass. With this fix, the following 2 test cases now pass: Test: dm_test_bus_children: bus.c test/dm/bus.c:112, dm_test_bus_children(): num_devices == list_count_items(&uc->dev_head): Expected 7, got 6 Test: dm_test_fdt: test-fdt.c test/dm/test-fdt.c:184, dm_test_fdt(): num_devices == list_count_items(&uc->dev_head): Expected 7, got 6 Fixes: f2006808f099 ("dm: core: parse chosen node") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14dm: Correct pre_reloc_only parameter description in several APIs' commentsBin Meng
The pre_reloc_only parameter description currently only mentions drivers with the DM_FLAG_PRE_RELOC flag, but does not mention the special device tree properties. Correct them. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()Bin Meng
Currently the comments of several APIs (eg: dm_init_and_scan()) say: @pre_reloc_only: If true, bind only drivers with the DM_FLAG_PRE_RELOC flag. If false bind all drivers. The 'Pre-Relocation Support' chapter in doc/driver-model/README.txt documents the same that both device tree properties and driver flag are supported. However the implementation only checks these special device tree properties without checking the driver flag at all. This updates lists_bind_fdt() to consider both scenarios. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Squashed in http://patchwork.ozlabs.org/patch/996473/ : Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-14dm: util: Add a livetree equivalent API of dm_fdt_pre_reloc()Bin Meng
This adds a new API dm_ofnode_pre_reloc(), a livetree equivalent API of dm_fdt_pre_reloc(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14cpu: mpc83xx: Remove unnecessary characters in the description stringBin Meng
The description string should not contain unnecessary characters, like the ending '\n' or the leading 'CPU:'. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14dm: cpu: Fix print_cpuinfo() outputBin Meng
It was observed that current output of print_cpuinfo() on QEMU x86 targets does not have an ending '\n', neither have a leading 'CPU:' any more. However it used to have these before. It turns out commit c0434407b595 introduced a unified DM version of print_cpuinfo() that exposed such issue on QEMU x86. Fixes: c0434407b595 ("board_f: Use static print_cpuinfo if CONFIG_CPU is active") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14board_f: Use static print_cpuinfo if CONFIG_CPU is activeMario Six
When the DM CPU drivers are active, printing information about a CPU should be delegated to a matching driver. Hence, add a static print_cpuinfo that implements this delegation when DM CPU drivers are active. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc> Changed condition to CONFIG_IS_ENABLED(CPU): Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-14Merge branch 'next'Tom Rini
This brings in the u-boot-net PR from Joe.
2018-11-14Prepare v2018.11Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14gpio: pca953x_gpio: fix DT GPIO flags translationAnatolij Gustschin
Commit fb01e07a95 accidentally broke initialisation of GPIO descriptor flags from device tree: currently the active low flag from gpio-specifier is always ignored. Fix it. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Mario Six <mario.six@gdsys.cc>
2018-11-14configs: Migrate and re-enabled CONFIG_CMD_MTDPARTSTom Rini
Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now. Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-13Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2018-11-13configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-13mtd: Drop duplicate MTD_PARTITIONS Kconfig optionBoris Brezillon
Commit 9c5b00973bce ("Convert CONFIG_MTD_PARTITIONS et al to Kconfig") introduced a publicly visible Kconfig entry for the CONFIG_MTD_PARTITIONS option, while the rework on MTD partitioning was in progress, and we somehow did not notice that the same Kconfig entry was added by commit 4048a5c519a8 ("mtd: declare MTD_PARTITIONS symbol in Kconfig"), but this time as an invisible entry (this can only be selected by other options). Keep the non-visible version of this symbol, since MTD_PARTITIONS is not something the user should be able to enable/disable directly. Fixes: 4048a5c519a8 ("mtd: declare MTD_PARTITIONS symbol in Kconfig") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-13cmd: ubi: Remove useless call to mtdparts_init()Boris Brezillon
Commit c58fb2cdb3e4 ("cmd: ubi: clean the partition handling") introduced a call to mtd_probe_devices() in the ubi_attach() path and this function takes care of parsing mtdparts/mtdids and creating/registering the associated mtd partitions. The mtdparts_init() call in the ubi_detach() path is not only unnecessary but can sometimes print error messages even when things work properly (that's the case with SPI NAND devices that have not been probed with 'mtd list'), which is misleading. Remove this call to mtdparts_init() and drop the dependency on CMD_MTDPARTS. Fixes: c58fb2cdb3e4 ("cmd: ubi: clean the partition handling") Reported-by: Stefan Roese <sr@denx.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Stefan Roese <sr@denx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-13mtd: Make {MTDIDS, MTDPARTS}_DEFAULT visible when MTD_PARTITIONS is selectedBoris Brezillon
gwventana configs are relying on CMD_UBI to select CMD_MTDPARTS, which is then making {MTDIDS,MTDPARTS}_DEFAULT options available. We are about to remove the 'select CMD_MTDPARTS' statement in the CMD_UBI entry, but if we do that without first making sure {MTDIDS,MTDPARTS}_DEFAULT are visible, we end up with a build failure when building gwventana configs. Address that by adding a depends on MTD_PARTITIONS to {MTDIDS,MTDPARTS}_DEFAULT which does the trick since CMD_UBI selects MTD_UBI which in turn selects MTD_PARTITIONS. We also get rid of the depends on CMD_MTD, since CMD_MTD also selects MTD_PARTITIONS. Reported-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-13dfu: nand: Add missing dependency on CMD_MTDPARTSBoris Brezillon
dfu_fill_entity_nand() uses find_dev_and_part() and mtdparts_init() which are provided by cmd/mtdparts.c. Add the dependency to avoid build failures when CMD_MTDPARTS is not selected. Reported-by: Jagan Teki <jagan@amarulasolutions.com> Fixes: 6828e602b722d ("dfu: Migrate to Kconfig") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-13mtd: Use default mtdparts/mtids when not defined in the environmentBoris Brezillon
U-boot provides a mean to define default values for mtdids and mtdparts when they're not defined in the environment. Patch mtd_probe_devices() to use those default values when env_get("mtdparts") or env_get("mtdids") return NULL. This implementation is based on the logic found in cmd/mtdparts.c. Fixes: 5db66b3aee6f ("cmd: mtd: add 'mtd' command") Reported-by: Stefan Roese <sr@denx.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Stefan Roese <sr@denx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-12Merge tag 'u-boot-imx-20181112' of git://git.denx.de/u-boot-imxTom Rini
Fix build vf boards + fix gpr_init()
2018-11-12imx: mkimage: add size check to the u-boot.imx make targetMarcel Ziswiler
The make macro to check if the binary exceeds the board size limit is taken straight from the root Makefile. Without this and e.g. enabled EFI Vybrid fails booting as the regular size limit check does not take the final u-boot.imx binary size into account which is bigger due to alignment as well as IMX header stuff. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2018-11-12board: toradex: colibri_vf: drop SPI supportMarcel Ziswiler
Drop SPI support saving precious 4 Kb on boards with tough size restrictions. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2018-11-12board: toradex: colibri_vf: unset CONFIG_CMDLINE_EDITINGMarcel Ziswiler
Unset CONFIG_CMDLINE_EDITING saving precious 4 Kb on boards with tough size restrictions. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2018-11-12board: toradex: colibri_vf: efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATIONMarcel Ziswiler
Unset CONFIG_EFI_UNICODE_CAPITALIZATION on boards with tough size restrictions. This is analogous to commit a90bf07afc43 ("efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATION"). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2018-11-10mmc: dw_mmc: Add RCRC handlingMarek Vasut
This patch adds check for command response CRC failure. The driver is currently ignoring CRC check failure on command resposes which have CRC atteched to it, which can be potentially dangerous. Even more grueling problem happens when the command response is followed by data transfer though, as in that case, the dwmci_data_transfer() function will spin until it reaches the 240s timeout. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-09common: build ymodem only on needJun Nie
Build ymodem only on need to shrink spl image size. Signed-off-by: Jun Nie <jun.nie@linaro.org>
2018-11-09common: Compile error with CONFIG_MULTI_DTB_FIT and not SPLLars Povlsen
common/common_fit.c is including <spl.h>, but not actually using it. The inclusion will cuase compile error on platforms using CONFIG_OF_SEPARATE and not SPL. Signed-off-by: Lars Povlsen <lars.povlsen@microsemi.com> Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-11-09dm: Fix typo - missed semicolonAndy Shevchenko
The commit 484fdf5ba058 ("dm: Add support for all targets which requires MANUAL_RELOC") introduces subtle typo, i.e. missed semicolon. Fixes: 484fdf5ba058 ("dm: Add support for all targets which requires MANUAL_RELOC") Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2018-11-09spl: fix debug prints for tiny printfSimon Goldschmidt
Tiny printf does not support %.*s and %lX. Since tiny printf should be very common in SPL, replace these by %32s (for printing image name) and %lx. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-09MAINTAINERS: Update stm32mp entryPatrick Delaunay
Add mailing list for stm32mp architecture and board. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-11-09fit: Add missing CR in debug output in fit_find_config_node()Stefan Roese
Testing has shown that a line-break is missing in one debug line in fit_find_config_node(). Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-08imx: imx6: perform gpr_init only on suitable cpu typesChristoph Niedermaier
If the function gpr_init is used in a common MX6 spl implementation we have to ensure that it is only called for suitable cpu types, otherwise it breaks hardware parts like enet1, can1, can2, etc. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.de>
2018-11-08Merge branch 'master' of git://git.denx.de/u-boot-ubiTom Rini
2018-11-07imx8qxp_mek: Disable CONFIG_DISPLAY_CPUINFOBin Meng
Due to revert of commit c0434407b595, this board does not build any more. Disable CONFIG_DISPLAY_CPUINFO for v2018.11 release. This commit should be reverted after v2018.11 release. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-07Revert "board_f: Use static print_cpuinfo if CONFIG_CPU is active"Bin Meng
This reverts commit c0434407b595f785fc7401237896c48c791b45fd. It turns out commit c0434407b595 broke some boards which have DM CPU driver with CONFIG_DISPLAY_CPUINFO option on. These boards just fail to boot when print_cpuinfo() is called during boot. Fixes are already sent to ML and in u-boot-dm/next, however since we are getting close to the v2018.11 release, it's safer we revert the original commit. This commit should be reverted after v2018.11 release. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-07Merge tag 'xilinx-for-v2018.11-rc3' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx fixes for v2018.11-rc3 - Fix fit loading address for Zynq
2018-11-07arm: zynq: Setup non zero SPL FIT load addressMichal Simek
Default setup is 0 which is incorrect place because it points to OCM which is allocated for SPL only in our case. Use address in DDR. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-07fs: ubifs: Fix UBIFS decompression on 64 bitPaul Davey
Add local size_t variable to crypto_comp_decompress as intermediate storage for destination length to avoid memory corruption and incorrect results on 64 bit targets. This is what linux does for the various lz compression implementations. Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz> Cc: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de>
2018-11-06Merge tag 'u-boot-imx-20181106' of git://git.denx.de/u-boot-imxTom Rini
Fix coverity issues for i.MX8
2018-11-06Merge git://git.denx.de/u-boot-marvellTom Rini
2018-11-06Merge git://git.denx.de/u-boot-x86Tom Rini
generated by cgit (git 2.34.1) at 2025-01-28 23:55:12 +0000