summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-29driver: net: fm: add DM MDIO supportMadalin Bucur
Allow the MDIO devices to be probed based on the device tree. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29driver: net: fm: separate receive buffer free codeMadalin Bucur
Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29driver: net: fm: change init_phy() paramMadalin Bucur
Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 to LS1046ARDBMadalin Bucur
Introduce the QorIQ DPAA 1 Frame Manager nodes in the LS1046ARDB device tree. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 for LS1046AMadalin Bucur
Add the QorIQ DPAA 1 Frame Manager v3 device tree nodes for the LS1046A SoC. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 to LS1043ARDBMadalin Bucur
Introduce the QorIQ DPAA 1 Frame Manager nodes in the LS1043ARDB device tree. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 for LS1043AMadalin Bucur
Add the QorIQ DPAA 1 Frame Manager v3 device tree nodes for the LS1043A SoC. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 device tree nodesMadalin Bucur
Add the QorIQ DPAA Frame Manager v3 device tree nodes description. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1012afrwy: drop env qspi_bootcmdBiwen Li
Drop useless environment variable installer and qspi_bootcmd for ls1012afrwy. Only 2 MB nor flash in ls1012afrwy. So cannot get kernel(30 MB) from the nor flash, then drop it. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1046aqds: support distro bootBiwen Li
Add support of distro boot for ls1046aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1028aqds: add lpuart configYuantian Tang
Add lpuart config to enable lpuart feature. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>. Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29armv8: ls1028aqds: add lpuart dts supportYuantian Tang
Rename fsl-ls1028a-qds.dts to fsl-ls1028a-qds.dtsi so that it can be used as common device tree for lpuart and duart. Add lpuart device tree and duart device tree respectively for qds which are used with duart and lpuart console. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls1028a: add lpuart nodesYuantian Tang
Add lpuart nodes to enable lpuart feature Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29board: freescale: ls1028a: mux changes for lpuartYuantian Tang
mux changes in board file to enable lpuart1 and macro define for lpuart1 used for mux changes in board configuation register 13 Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: lx2160ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LX2160ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls2088ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS2088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1088ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS1088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls1088ardb: add DPMAC and PHY nodesIoana Ciornei
In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the external MDIO nodes and describe the PHYs (8 x VSC8514, AQR105). Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls2088ardb: add DPMAC and PHY nodesIoana Ciornei
In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the external MDIO nodes and describe the PHYs (4 x AQR405 and 4 x CS4340). Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: lx2160ardb: add DPMAC and PHY nodesIoana Ciornei
In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the EMDIO1 node and describe the 2 AR8035 RGMII PHYs and the 2 AQR107 PHYs. Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls1088a: add external MDIO nodesIoana Ciornei
Add the External MDIO1 device node found in the WRIOP global memory region. This is needed for management of external PHYs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls2088a: add external MDIO nodesIoana Ciornei
Add the External MDIO1 device node found in the WRIOP global memory region. This is needed for management of external PHYs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: lx2160a: add external MDIO nodesIoana Ciornei
Add the External MDIO device nodes found in the WRIOP global memory region. This is needed for management of external PHYs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29board: ls2088ardb: transition to DM_ETHIoana Ciornei
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29board: ls1088ardb: transition to DM_ETHIoana Ciornei
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29drivers: net: fsl-mc: add support for CONFIG_DM_ETHIoana Ciornei
Make any adjustments necessary in order to support DPAA2 devices probed using CONFIG_DM_ETH. While at it, fixup some styling issues aroung the switch-case statement. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29drivers: net: ldpaa: add DTS based probing supportIoana Ciornei
When CONFIG_DM_ETH is enabled DPAA2 network interfaces will now probe based on DTS nodes with the "fsl,qoriq-mc-dpmac" compatible. In this case, transform the ldpaa_eth driver into a UCLASS_ETH driver and reuse the _open()/_tx()/_stop() functions already inplemented. For the moment, the ldpaa_eth driver will support both configurations: with or without CONFIG_DM_ETH enabled. Any 'struct eth_device' occurrence now has a matching 'struct udevice' made mutually exclusive based on the state of CONFIG_DM_ETH. Signed-off-by: Florin Laurentiu Chiculita <florinlaurentiu.chiculita@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29drivers: net: add Layerscape mEMAC MDIO driverIoana Ciornei
Add a driver for the MDIO interface integrated in the mEMAC (Multi-rate Ethernet Media Access Controller) and the Fman 10G Ethernet MACs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28lx2160a : Update eMMC boot environment variableMeenakshi Aggarwal
Update mcinitcmd and bootcmd environment variable for emmc boot. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls208xa: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1028a: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1088a: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28fsl-layerscape: Move GIC RD tables init to soc.cHou Zhiqiang
Move GIC redistributor tables initialization to CPU setup function. This patch introduces a GIC redistributor tables init function, and moves the function of reserving memory for GIC redistributor tables to soc.c and adds a argument for the memory size to reserve, BTW rename the function so that it is more readable. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28fsl-layerscape: Kconfig: Select RESV_RAM if GIC_V3_ITSHou Zhiqiang
The GIC redistributor tables initialization depends on RESV_RAM config, so select RESV_RAM if GIC_V3_ITS is enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28board: lx2160a: Align RD tables address to 64KBHou Zhiqiang
As the lower 16bit of the redistributor pending table is reserved for describing the memory attributes, we must give a 64KB aligned address to the GIC LPI initialization function. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28board: lx2160a: Add check in GIC RD tables initHou Zhiqiang
Program the GIC redistributor tables only when succeeded to reserve memory for them, otherwise kernel will lose the chance to program them using allocated memory. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28fsl-layerscape: Add RESV_RAM check in resv_ram addrHou Zhiqiang
The initialization of gd->arch.resv_ram pointer should depend on if the RESV_RAM config is enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28armv8: ls1046ardb: update the DIMM WRLVL_START valueYuantian Tang
The WRLVL_START values are optimized for old DDR MTA18ASF1G72AZ. Update DDR struct to set new WRLVL_START values so that the new DIMM MTA18ADF2G72AZ get optimized and the old DIMM still works. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1021a: Append CMA configuration to bootargsAlison Wang
The default reserved memory for CMA is high memory. If LPAE is enabled, highmem pages are non-remapped and can not be used with dma_alloc_coherent. Reserving low memory for CMA is needed for LS1021A. This patch appends the related CMA configuration to bootargs. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28include/configs: ls1012afrwy: support dhcp bootBiwen Li
Add support of dhcp boot for ls1012afrwy Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-27Merge tag 'video-for-v2020.07-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - simple panel 'nv140fhmn49' compatible - rockchip eDP and LVDS drivers build fix
2020-04-26video: simple_panel: add boe,nv140fhmn49 displayPeter Robinson
add "boe,nv140fhmn49" display to compatible node. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Anatolij Gustschin <agust@denx.de>
2020-04-26drivers: video: rockchip: fix building eDP and LVDS driversPeter Robinson
The rk_edp.c and rk_lvds.c files reference rk_setreg which is declared in hardware.h so include it so the drivers build. Adjust rk_lvds.c so includes are in alphabetical order while updating. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Tested-by: Vagrant Cascadian <vagrant@debian.org>
2020-04-25Merge branch '2020-04-25-master-imports'Tom Rini
- Assorted minor fixes - Actions S700 SoC and Cubieboard7 support
2020-04-24rtc: ds1374: typo WatchdogHeinrich Schuchardt
%s/Watchdoc/Watchdog/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24spi: mpc8xxx_spi: fix missing dev_err definitionRasmus Villemoes
The build currently fails with drivers/spi/mpc8xxx_spi.c:64:3: warning: implicit declaration of function ‘dev_err’ [-Wimplicit-function-declaration] ... drivers/spi/built-in.o: In function `mpc8xxx_spi_set_speed': drivers/spi/mpc8xxx_spi.c:227: undefined reference to `dev_err' Fixes: 4856cc7a97 (mpc8xxx_spi: implement real ->set_speed) Fixes: 1a7b462dee (mpc8xxx_spi: put max_cs to use) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-04-24spl: fit: do not check argument of free()Heinrich Schuchardt
The free() function checks if its argument is NULL. It is superfluous to do the same check on the calling side. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24MAINTAINERS: add entry for cubieboard7 configAmit Singh Tomar
This commit adds entry for cubieboard7 config under Actions Semi OWL family. Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24doc: boards: add Cubieboard7 documentationAmit Singh Tomar
This adds build and flash steps for Actions S700 based Cubieboard7 board. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: add Cubieboard7 board supportAmit Singh Tomar
The Cubieboard is a single board computer containing a Actions S700 SoC(with 4 ARMv8 Cortex-A53 cores). This patch adds respective defconfig alongwith .dts(copied from Linux v5.5-rc6 with hash "b3a987b0264d"). Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-27 03:38:53 +0000