summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-07-20armv8: Fix TCR macros for shareability attributeZhichun Hua
For ARMv8, outer shareable is 0b10, inner shareable is 0b11 at bit position [13:12] of TCR_ELx register. Signed-off-by: Zhichun Hua <zhichun.hua@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085a/defconfig: Enable FSL_DSPI, OF_CONTROL and DM supportHaikun.Wang@freescale.com
Freescale DSPI driver has been converted to Driver Model. The new driver depends on OF_CONTROL, DM, DM_SPI. This patch enable FSL_DSPI and its dependence configure options. Signed-off-by: Haikun Wang <haikun.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085ardb: Enable DSPI flash support for LS2085ARDBHaikun Wang
Enable DSPI flash related configurations for LS2085ARDB. Signed-off-by: Haikun Wang <haikun.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085aqds: Enable DSPI flash support for LS2085AQDSHaikun Wang
Enable DSPI flash related configurations. Signed-off-by: Haikun Wang <haikun.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085ardb: DSPI pin muxing configure through QIXIS CPLDHaikun.Wang@freescale.com
DSPI has pin muxing with SDHC and other IPs, this patch check the value of RCW SPI_PCS_BASE and SPI_BASE_BASE fields, it also check the "hwconfig" variable. If those pins are configured to DSPI and "hwconfig" enable DSPI, set the BRDCFG5 of QIXIS CPLD to configure the routing to on-board SPI memory. Otherwise will configure to SDHC. DSPI is enabled in "hwconfig" by appending "dspi", eg. setenv hwconfig "$hwconfig;dspi" Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085aqds: DSPI pin muxing configure through QIXISHaikun Wang
DSPI has pin muxing with SDHC and other IPs, this patch check the value of RCW SPI_PCS_BASE and SPI_BASE_BASE fields, it also check the "hwconfig" variable. If those pins are configured to DSPI and "hwconfig" enable DSPI, set the BRDCFG5 of QIXIS FPGA to configure the routing to on-board SPI memory. Otherwise will configure to SDHC. DSPI is enabled in "hwconfig" by appending "dspi", eg. setenv hwconfig "$hwconfig;dspi" Signed-off-by: Haikun Wang <haikun.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085a: Enable DSPI get input clk form 'mxc_get_clock'Haikun Wang
Signed-off-by: Haikun Wang <haikun.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20arm/dts/ls2085a: Add dts files for LS2085AQDS and LS2085ARDBHaikun Wang
Add dts source files for LS2085AQDS and LS2085ARDB boards. Signed-off-by: Haikun Wang <haikun.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20arm/dts/ls2085a: Add DSPI dts nodeHaikun Wang
Add DSPI controller dts node in fsl-ls2085a.dtsi Signed-off-by: Haikun Wang <haikun.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20arm/dts/ls2085a: Bring in ls2085a dts files from linux kernelHaikun Wang
Bring in required device tree files for ls2085a from Linux. These are initially unchanged and have a number of pieces not needed by U-Boot. Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20arm/ls102xa: Add little-endian mode support for audio IPsAlison Wang
As SCFG_ENDIANCR register is added to choose little-endian or big-endian for audio IPs on Rev2.0 silion, little-endian mode is selected. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20arm/ls102xa: Add PSCI support for ls102xaWang Dongsheng
Base on PSCI services, implement CPU_ON/CPU_OFF for ls102xa platform. Tested on LS1021AQDS, LS1021ATWR. Test CPU hotplug times: 60K Test kernel boot times: 1.2K Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Acked-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20ARMv7: Factor out reusable timer_wait from sunxi/psci_sun7i.SWang Dongsheng
timer_wait is moved from sunxi/psci_sun7i.S, and it can be converted completely into a reusable armv7 generic timer. LS1021A will use it as well. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20arm: ls1021a: Remove the inappropriate use of the function 'sprintf'Alison Wang
As the function 'sprintf' does not check buffer boundaries but outputs to the buffer 'enet' of fixed size (16), this patch removes the function 'sprintf', and uses 'strcpy' instead. It will assign the character arrays 'enet' and 'phy' the corresponding character strings. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20board/ls2085a: Increase kernel_size value in env variablePrabhakar Kushwaha
Linux itb image size has been increased from 30MB. So updating kernel_size to 40MB in env variable. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20board/ls2085rdb: Export functions for standalone AQ FW load appsPrabhakar Kushwaha
Export functions required by Aquntia PHY firmware load application. functions are memset, strcpy, mdelay, mdio_get_current_dev, phy_find_by_mask, mdio_phydev_for_ethname and miiphy_set_current_dev Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20driver/ldpaa_eth:Avoid infinite loop in ldpaa_eth_rxPrabhakar Kushwaha
Change infinite loop mechanism to timer based polling for QBMAN release in ldpaa_eth_rx. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20driver/ldpaa_eth: Avoid TX conf framesPrabhakar Kushwaha
Polling of TX conf frames is not a mandatory option. Packets can be transferred via WRIOP without TX conf frame. Configure ldpaa_eth driver to use TX path without confirmation frame Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20driver/ldpaa_eth: Add timeout handling DQRR entry readPrabhakar Kushwaha
Volatile command does not return frame immidiately, need to wait till a frame is available in DQRR. Ideally it should be a blocking call. Add timeout handling for DQRR frame instead of retry counter. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20driver/ldpaa_eth: Retry enqueue if portal was busyPrabhakar Kushwaha
Do not immediately return if the enqueue function returns -EBUSY; re-try mulitple times. if timeout occures, release the buffer. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/fsl-lsch3: device tree fixups for PCI stream IDsStuart Yoder
This patch adds the infrastructure to update device tree nodes to convey SMMU stream IDs in the device tree. Fixups are implemented for PCI controllers initially. Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20drivers/fsl-mc: dynamically create ICID pool in DPCStuart Yoder
delete any existing ICID pools in the DPC and create a new one based on the stream ID partitioning for the SoC Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/fsl-lsch3: partition stream IDsStuart Yoder
Stream IDs on ls2085a devices are not hardwired and are programmed by sw. There are a limited number of stream IDs available, and the partitioning of them is scenario dependent. This header defines the partitioning between legacy, PCI, and DPAA2 devices. Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20drivers: fsl-mc: Return error for major version mismatchPrabhakar Kushwaha
Management complex major version should match to the firmware present in flash. Return error during mismatch of major version. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20drivers: fsl-mc: Update qbman driverPrabhakar Kushwaha
Update qbman driver - As per latest available qbman driver - Use of atomic APIs Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> CC: Geoff Thorpe <Geoff.Thorpe@freescale.com> CC: Haiying Wang <Haiying.Wang@freescale.com> CC: Roy Pledge <Roy.Pledge@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20drivers: fsl-mc: Update flibs to mc-0.6.0.1Prabhakar Kushwaha
Update flibs changes to mc-0.6.0.1 for dpmang, dprc, dpni and dpio objects Also rename qbman_portal_ce/ci_paddr to qbman_portal_ce/ci_offset in dpio_attr. These are now offsets from the SoC QBMan portals base. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20drivers/fsl-mc: Autoload AOIP image from NOR flashJ. German Rivera
Load AIOP image from NOR flash into DDR so that the MC firmware the MC fw can start it at boot time Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20driver/ldpaa_eth:Flush buffer before seeding BMAN after TX_confPrabhakar Kushwaha
Flush buffer before releasing to BMan after TX_conf to ensure, the core does not have any cachelines that the WRIOP will DMA to. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20drivers/fsl-mc: Make MC boot error messages more readableJ. German Rivera
Make it easier for the user to notice when the MC firmware had problems booting. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085a: enable debug serverStuart Yoder
Signed-off-by: Stuart Yoder <stuart.yoder at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/fsl-lsch3: Support 256M mem split for MC & dbg-srvrPrabhakar Kushwaha
The agreed split of the top of memory is 256M for debug server and 256M for MC. This patch implements the split. In addition, the MC mem must be 512MB aligned, so the amount of memory to hide must be 512MB to achieve that alignment. Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20arm/errata: Update required bits for A57 cores erratasBhupesh Sharma
This patch updates the setting of required bits for A57 cores erratas - 828024 and 826974 Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com> Signed-off-by: Dai Haruki <dai.haruki at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20driver/fsl_debug_server: Fix the DDR hide logic for LS2085aBhupesh Sharma
This patch fixes the DDR hide logic for LS2085a, correcting the way the Debug Server FW and MC FW images are placed on the top of system DDR and how the rest of the system DDR space is made visibile to Linux. Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085a: Update SoC README for DDR layoutPrabhakar Kushwaha
Update SoC README to provide details of - Memory regions - Memory used by MC and Debug server Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085a: Expose all DDR region(s) to LinuxBhupesh Sharma
This patch allows u-boot to expose the complete DDR region(s) to Linux (after subtracting the memory hidden via MEM_TOP_HIDE mechanism). This allows the u-boot to support the 48-bit VA support provided by ARM64 Linux in flavors 3.18 and above, by passing the appropriate 'memory' DTS nodes. Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085ardb: Fix SPD address error on early boardsYork Sun
Board rev C and earlier has duplicated SPD address on 2nd DDR controller slots. It is fixed on rev D and later. SPD addresses need to be updated accordingly. Signed-off-by: York Sun <yorksun at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
2015-07-20driver/ddr/fsl: Add a hook to update SPD addressYork Sun
In case SPD address changes between board revisions, updating SPD address can be called from board file. Signed-off-by: York Sun <yorksun at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
2015-07-20armv8/ls2085a: Avoid hard-coding for board name printPrabhakar Kushwaha
LS2085A supports 6 personalities i.e. LS2045AE, LS2045A, LS2080AE, LS2080A, LS2085AE and LS2085A personlities. Instead of hard-coding, board name should change as per selected personality. Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/fsl-ch3: Add support to print SoC personalityPrabhakar Kushwaha
This patch adds support to print out the SoC personality. Freescale LS20xx SoCs (compliant to Chassis-3 specifications) can have 6 personalities: LS2045AE, LS2045A, LS2080AE, LS2080A, LS2085AE and LS2085A Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/fsl-lsch3: Fix DDR speed messageYork Sun
DDR speed should be in MT/s, not MHz. Signed-off-by: York Sun <yorksun at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
2015-07-20armv8/ls2085RDB: Update board version print logicPrabhakar Kushwaha
As per updated board document, no need to substract 1 from arch[BRD] bit field. Default value + 'A' represents the board revision. So update board version print logic to reflect the same. Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20board/fsl/common: Fix eeprom system version endiannessJaiprakash Singh
SYSTEM ID EPPROM always store SYSTEM version info in big endian format. SoC with ARM or PowerPC core should read/write version info from eeprom in BIG endian format. So use cpu-specific APIs to read SYSTEM version. Signed-off-by: Jaiprakash Singh <b44839 at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085a: Increase the supported kernel sizeBhupesh Sharma
Increases the kernel size supported for LS2085A platforms:- - Update environment variables - Add ramdisk_size in bootargs env variable - Define CONFIG_SYS_BOOTM_LEN to 64MB Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085rdb: Update PCA9547PW slave addressPrabhakar Kushwaha
Primary Mux on I2C1 controller has slave address as 0x75. So update its address. Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085qds: Update SFP TX bit as "0" to enable XFIPrabhakar Kushwaha
FPGA BRDCFG9[SFP_TX] should be clear in order to enable XFI ports. Signed-off-by: Dai Haruki <Dai.Haruki at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085a: call ft_pcie_setup() to change dts statusPrabhakar Kushwaha
call ft_pci_setup() to disable PCIe dts node if corresponding PCIe controller is disabled according to RCW Signed-off-by: Minghuan Lian <Minghuan.Lian at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085a: Update LS2085a PCIe compatiblePrabhakar Kushwaha
Compatible field "fsl,20851a-pcie" is not correct. So update it to "fsl,ls2085a-pcie" Signed-off-by: Minghuan Lian <Minghuan.Lian at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085aqds: Add support of SerDes protocol 0x49Prabhakar Kushwaha
SerDes Protocol 0x49 enables 4 SGMII, PEX4, SATA1 and SATA2. Add support of 0x49 SerDes protocol to enable 4SGMII on slot4 of ls2085aqds platform. Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085a: Enable "date" command for QDS and RDBPriyanka Jain
Enable "date" command for QDS and RDB boards Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20armv8/ls2085ardb: add hwconfig setting for eSDHCYangbo Lu
Add hwconfig setting for eSDHC since it shares some pins with other IP block. Signed-off-by: Yangbo Lu <yangbo.lu at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
generated by cgit (git 2.34.1) at 2024-12-29 16:11:02 +0000