summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-20imx8qxp_mek: Include fdt_support.h headerAlifer Moraes
Include fdt_support.h header file to fix the following sparse warning: board/freescale/imx8qxp_mek/imx8qxp_mek.c:129:5: warning: no previous prototype for ‘ft_board_setup’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20spl: Add prototype to function spl_board_boot_device()Alifer Moraes
Add prototype to function spl_board_boot_device to fix the following sparse warning: board/freescale/imx8mm_evk/spl.c:26:5: warning: no previous prototype for ‘spl_board_boot_device’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20mx8mm_evk: spl: Staticize functionsAlifer Moraes
Functions spl_dram_init() and power_init_board() are used only in the scope of this file, so make them static to fix the following sparse warnings: board/freescale/imx8mm_evk/spl.c:40:6: warning: no previous prototype for ‘spl_dram_init’ [-Wmissing-prototypes] board/freescale/imx8mm_evk/spl.c:85:5: warning: no previous prototype for ‘power_init_board’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20imx8m: clock_imx8mm: Staticize functionsAlifer Moraes
Functions fracpll_configure(), decode_intpll(), decode_fracpll(), get_root_src_clk() and get_root_clk() are used only in the scope of this file, so make them static to fix the following sparse warnings: arch/arm/mach-imx/imx8m/clock_imx8mm.c:50:5: warning: no previous prototype for ‘fracpll_configure’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:271:5: warning: no previous prototype for ‘decode_intpll’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:418:5: warning: no previous prototype for ‘decode_fracpll’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:483:5: warning: no previous prototype for ‘get_root_src_clk’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:527:5: warning: no previous prototype for ‘get_root_clk’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20imx: fix typo in header fileFlavio Suligoi
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
2020-01-20fsl: fix typo in header fileFlavio Suligoi
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
2020-01-20imx8mm_evk: Include sys_proto.h headerAlifer Moraes
Add sys_proto.h header file to fix the following sparse warning: board/freescale/imx8mm_evk/imx8mm_evk.c:59:5: warning: no previous prototype for ‘board_mmc_get_env_dev’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20arm: dts: imx7ulp-evk: remove mux value from pad configurationJorge Ramirez-Ortiz
The mux mode is embedded in the PAD definition and therefore there is no need to repeat it in the PAD configuration value (more over since this information will be masked out when the configuration value is applied). Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20imx: imx8mm_evk: remove hdmi fw info from READMEFlavio Suligoi
The imx8mm doesn't require the hdmi firmware. Update also the fw version. Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-01-20mx7dsabre: Fix dm probe pmicJoris Offouga
With commit 0d52bab4621 ("mx7dsabre: Enable DM_ETH") Device Tree has been update and change pfuze3000 node Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20mx7ulp: soc: s_init should only be executed onceJorge Ramirez-Ortiz
On SPL enabled systems, the current s_init code (wdog, clock and ldo init) is executed twice (by SPL and u-boot). This is not necessary and might lead to boot issues (ie, starting PMC1 when it is already running). Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20mx7ulp_evk_plugin: Disable CONFIG_NETFabio Estevam
Currently the following build warning is seen: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. =================================================== Since the mx7ulp-evk board does not have networking support, explicitly disable networking. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-01-20arm: dts: i.mx8x: add #cooling-cells propertiesAnatolij Gustschin
Fix dtb building warnings: Warning (cooling_device_property): /thermal-zones/cpu-thermal0/cooling-maps/map0: Missing property '#cooling-cells' in node /cpus/cpu@0 or bad phandle (referred from cooling-device[0]) Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVKArkadiusz Karas
Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support. The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier board has Ethernet, USB host port, USB OTG port. Signed-off-by: Arkadiusz Karas <arkadiusz.karas@somlabs.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-01-20ARM: imx: vining2000: Enable SPL SDP by defaultMarek Vasut
Enable SPL SDP fallback boot option in default build. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
2020-01-20ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200Marek Vasut
The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
2020-01-20ARM: imx: vining2000: Clean up uSDHC4 setupMarek Vasut
Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-01-20Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-01-20arm: omap: fix MPU DPLL divisor for 800MHz clockDario Binacchi
In locked condition CLKOUT = CLKINP * [M / (N + 1)]. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20clk: sci-clk: add slack to clk-set-rate passed to firmwareLokesh Vutla
Add slack to the clock frequency parameters passed to firmware within clk_set_rate. min-freq is changed to 0 and max-rate is changed to ULONG_MAX. This fixes certain issues with pll clock rounding when the firmware is not able to set the frequency exactly to the target, the current implementation fails if the available frequency is even 1Hz off the target. With the change, the firmware still tries its best to set the frequency as close as possible to the target. Reported-by: Vishal Mahaveer <vishalm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20MAINTAINERS: Update ARM TI entryLokesh Vutla
Take over TI maintainership from Tom. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: am65x_evm: Enable USB keyboard as second stdinVignesh Raghavendra
Enable USB keyboard to be used as input device at U-Boot prompt. Both serial and USB keyboard will be active inputs simultaneously. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20am65x_evm_a53_defconfig: Enable configs to support USB and DFUVignesh Raghavendra
Enable configs related to USB Host mode, Peripheral mode and DFU. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: am65x_evm: Add DFU related env variablesVignesh Raghavendra
Add env variables that set up dfu_alt_info for MMC/EMMC/OSPI. This is required to allow update of firmware on these media. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: dts: k3-am654-base-board: enable USB1Vignesh Raghavendra
Add pinmux for USB1 and enable it as a peripheral port in U-Boot specific dtsi since U-Boot does not support OTG. Disable USB0 as its not available on the baseboard. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: dts: k3-am65-main: add USB supportVignesh Raghavendra
Add support for USB0 and USB1 instances on the AM6 SoC. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20phy: omap-usb2-phy: Add support for AM654 USB2 PHYVignesh Raghavendra
AM654 SoC has USB2 PHY which is similar to existing USB2 PHYs on OMAP SoCs. Add support for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20phy: omap-usb2-phy: Fix warnings when built for ARM64Vignesh Raghavendra
Below warning is seen when this driver is built for devices with 64 bit physical address space. drivers/phy/omap-usb2-phy.c: In function ‘omap_usb2_phy_probe’: drivers/phy/omap-usb2-phy.c:187:20: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] priv->phy_base = (void *)base; ^ Fix this by using dev_read_addr_ptr() instead of dev_read_addr(). Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20dwc3-generic: Add support for AM654 USB controllerVignesh Raghavendra
AM654 has DWC3 USB controller that is very similar to other TI SoCs. Add a new compatible to enable the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: am65x_evm: Add Support for ADMAFaiz Abbas
Add Support for ADMA in a53 and r5 defconfigs. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20ARM: dts: omap3/omap35 Torpedo and SOM-LV: Unify and shrink SPL dtbAdam Ford
None of these boards boot, but the solution appears to be the same. All the boards have SPL that is too large. With a few defconfig options removed, these corresponding options can be removed from their respective SPL dtb files. This patch unifies the DM37/OMAP35 boards' -u-boot.dtsi files to remove gpio's, i2c, bandgap, thermal zones, unneeded uarts, and unneeded MMC nodes. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: omap3/35_logic and omap3/35_logic_somlv: Reduce SPL sizeAdam Ford
Currently the DM37 and OMAP35 boards do not boot due to SPL bring too large. SPL doesn't need GPIO, I2C nor MMC sector access since it uses a FAT file system. This patch unifies all these boards to remove these unused features from their defconfigs Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: Add configs for J721e High Security EVMAndrew F. Davis
Add new defconfig files for the J721e High Security EVM. These defconfigs are the same as for the non-secure part, except for: CONFIG_TI_SECURE_DEVICE option set to 'y' CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y' CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y' CONFIG_BOOTCOMMAND uses FIT images for booting Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: K3: Increase default SYSFW image size allocationAndrew F. Davis
The memory allocated to store the FIT image containing SYSFW and board configuration data is statically defined to the largest size expected. This was 276000 bytes but now needs to be grown to 277000 to make room for the slightly larger SYSFW image used on J721e High-Security devices. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: K3: Disable ROM configured firewallsAndrew F. Davis
ROM configures certain firewalls based on its usage, which includes the one in front of boot peripherals. In specific case of boot peripherals, ROM does not open up the full address space corresponding to the peripherals. Like in OSPI, ROM only configures the firewall region for 32 bit address space and mark 64bit address space flash regions as in-accessible. When security-cfg is initialized by sysfw, all the non-configured firewalls are kept in bypass state using a global setting. Since ROM configured firewalls for certain peripherals, these will not be touched. So when bootloader touches any of the address space that ROM marked as in-accessible, system raises a firewall exception causing boot hang. It would have been ideal if sysfw cleans up the ROM configured boot peripheral firewalls. Given the memory overhead to store this information provided by ROM and the boot time increase in re configuring the firewalls, it is concluded to clean this up in bootloaders. So disable all the firewalls that ROM doesn't open up the full address space. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Venkateswara Rao Mandela <venkat.mandela@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: K3: Fix header comment match AM6 specific file functionAndrew F. Davis
This file used to be the common location for K3 init when AM6 was the only device, but common code was moved to common.c and this file became AM6 specific, correct this header text. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: ti: Factor out call to 'args_mmc' into MMC common environmentAndrew F. Davis
Both 'loadfit' and 'mmcloados' start with a call to 'args_mmc' so this can be factored out to before eithers only call site. This also allows us to remove that call from 'loadfit', which should not have been calling it anyway as that command should not be MMC specific. Without the call to 'args_mmc' the command 'loadfit' becomes just a call to 'run_fit' so remove the indirection and call 'run_fit' directly, this removes the need for 'loadfit' command (which was misnamed anyway). Drop it. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: j721e_evm.h: Sync J721e environment configuration with AM65xAndrew F. Davis
Some of the environment configuration in AM65x is not available in J721e due to additions on one but not the other. These two platforms are similar enough these common definitions should be factored out to a common area, prepare for this by synchronizing them. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: am57xx: env: Fix DFU variablesSam Protsenko
Commit 8502fe84a4fc ("configs: am57xx_evm: define CONFIG_SPL_LOAD_FIT_ADDRESS for SPL-DFU") implements incorrect ifdef logic, which leads to DFU variables absence in non-SPL environment. Fix that in order to bring back DFU variables, by reflecting the logic in include/configs/dra7xx_evm.h. Fixes: 8502fe84a4fc ("configs: am57xx_evm: define CONFIG_SPL_LOAD_F...") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: dts: k3-am654-r5-base-board: Fix power-domains for wkup_vtm0Lokesh Vutla
wkup_vtm populates only 1 power-domain cell in it's node. But the power-domain cell are defined as 2. Due to this the following warning comes during build: arch/arm/dts/k3-am654-r5-base-board.dtb: Warning (power_domains_property): /interconnect@100000/interconnect@28380000/interconnect@42040000/ wkup_vtm@42050000:power-domains: property size (8) too small for cell size 2 Fix this by updating the power-domain cells. Fixes: cfa6bd549c ("arm: dts: k3-am654-r5-base-board: Add VTM node") Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20power: regulator: tps62360_regulator: Convert ofdata_to_platdata to the ↵Keerthy
missing probe commit 29f7d05a347a ("dm: core: Move ofdata_to_platdata() call earlier") introduces changes in the order of device_probe execution. ofdata_to_platdata now comes before the probe function which resulted in a deadlock and caused boot hang on AM6 devices. Deadlock sequence: tps62360_regulator_ofdata_to_platdata --> i2c_get_chip --> device_probe(tps62360) --> tps62360_regulator_ofdata_to_platdata Hence convert ofdata_to_platdata to the missing probe function to fix the hang. Fixes: 22e8f18980d6 ("power: regulator: tps6236x: add support for tps6236x regulators") Signed-off-by: Keerthy <j-keerthy@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: mach-k3: security: Clean image out of cache before authenticationAndrew F. Davis
On K3 systems U-Boot runs on both an R5 and a large ARM cores (usually A53 or A72). The large ARMs are coherent with the DMA controllers and the SYSFW that perform authentication. And previously the R5 core did not enable caches. Now that R5 does enable caching we need to be sure to clean out any of the image that may still only be in cache before we read it using external DMA for authentication. Although not expected to happen, it may be possible that the data was read back into cache after the flush but before the external operation, in this case we must invalidate our stale local cached version. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: mach-k3: Warn when node to disable is not foundAndrew F. Davis
Not finding a node that we try to disable does not always need to be fatal to boot but should at least print out a warning. Return error from fdt_disable_node as it did fail to disable the node, but only warn in the case of disabling the TRNG as this will not prevent boot. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20defconfigs: am43xx_hs_evm: Sync HS and non-HS defconfigsAndrew F. Davis
Sync new additions to non-HS defconfig with HS defconfig. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20defconfigs: am335x_hs_evm: Sync HS and non-HS defconfigsAndrew F. Davis
Sync new additions to non-HS defconfig with HS defconfig. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: j721e_evm_a72_defconfig: Enable I2C and EEPROM supportVignesh Raghavendra
Enable I2C and EEPROM related configs for A72 SPL/U-Boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm64: dts: k3-j721e-common-proc-board: Fully enable wkup_i2c0 useAndreas Dannenberg
Make the wkup_i2c0 module usable across all stages of U-Boot by adding the needed definitions including the associated pinmux definitions. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20board: ti: j721e: Print board name and version during bootLokesh Vutla
Print the board name and ver along with the DT Model. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20board: ti: j721e: Use EEPROM-based board detectionAndreas Dannenberg
The TI J721E EVM system on module (SOM), the common processor board, and the associated daughtercards have on-board I2C-based EEPROMs containing board config data. Use the board detection infrastructure to do the following: 1) Parse the J721E SOM EEPROM and populate items like board name, board HW and SW revision as well as board serial number into the TI common EEPROM data structure residing in SRAM scratch space 2) Check for presence of daughter card(s) by probing associated I2C addresses used for on-board EEPROMs containing daughter card-specific data. If such a card is found, parse the EEPROM data such as for additional Ethernet MAC addresses and populate those into U-Boot accordingly 3) Dynamically apply daughter card DTB overlays to the U-Boot (proper) DTB during SPL execution 4) Dynamically create an U-Boot ENV variable called name_overlays during U-Boot execution containing a list of daugherboard-specific DTB overlays based on daughercards found to be used during Kernel boot. This patch adds support for the J721E system on module boards containing the actual SoC ("J721EX-PM2-SOM", accessed via CONFIG_EEPROM_CHIP_ADDRESS), the common processor board ("J7X-BASE-CPB"), the Quad-Port Ethernet Expansion Board ("J7X-VSC8514-ETH"), the infotainment board ("J7X-INFOTAN-EXP") as well as for the gateway/Ethernet switch/industrial expansion board ("J7X-GESI-EXP"). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20ti: common: board_detect: Handle EEPROM probe more gracefullyAndreas Dannenberg
Use dm_i2c_probe() rather than i2c_get_chip() when trying to access board-detection EEPROM devices. This has the advantage of more gracefully handling the case when the EEPROM is not present by allowing to exit the function early rather than failing and outputting an error message on the I2C transactions that follow. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
generated by cgit (git 2.34.1) at 2025-01-02 16:06:09 +0000