summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-31env: sf: avoid space in backend namePatrick Delaunay
Remove space in ENV backend name for SPI Flash (SF) to avoid issue with env select command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31env: ext4: set gd->env_validPatrick Delaunay
Add a missing initialization of gd->env_valid in env_ext4_load as it is already done in some other env device. Set gd->env_valid = ENV_VALID in env_ext4_save() and env_ext4_load(). This patch allows to have a correct information in 'env info' command. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31env: add absolute path at CONFIG_ENV_EXT4_FILEPatrick Delaunay
Add the absolute path to the default value of CONFIG_ENV_EXT4_FILE = "/uboot.env". This patch avoid the error : Saving Environment to EXT4... File System is consistent Please supply Absolute path Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31env: add prototypes for weak functionPatrick Delaunay
This patch adds prototypes for several weak functions: - env_ext4_get_intf - env_ext4_get_dev_part - env_get_location It solves the following warnings when compiling with W=1 on stm32mp1 board: board/st/stm32mp1/stm32mp1.c:849:19: warning: no previous prototype for 'env_get_location' [-Wmissing-prototypes] enum env_location env_get_location(enum env_operation op, int prio) ^~~~~~~~~~~~~~~~ board/st/stm32mp1/stm32mp1.c:876:13: warning: no previous prototype for 'env_ext4_get_intf' [-Wmissing-prototypes] const char *env_ext4_get_intf(void) ^~~~~~~~~~~~~~~~~ board/st/stm32mp1/stm32mp1.c:889:13: warning: no previous prototype for 'env_ext4_get_dev_part' [-Wmissing-prototypes] const char *env_ext4_get_dev_part(void) ^~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31test: efi_selftest: Do not force serial# settingTom Rini
As part of the EFI self test we set and check the serial# variable. However, we should not be forcing this setting. In the case where we are allowed to change the variable it will change, and we will pass the test. In the case where we cannot change it, force may or may not be allowed, depending on further environment restrictions. Drop the -f flag here as we do not need it. Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-31test: do not rely on => being the promptHeinrich Schuchardt
In our tests we should use the customized prompt for testing. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Tom Rini <trini@konsulko.com>
2020-07-29Merge tag 'dm-pull-28jul20' of git://git.denx.de/u-boot-dmTom Rini
Use binman instead of one of the Rockchip build scripts Refactor to allow any arch to create SPI-flash images New button uclass
2020-07-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-stmTom Rini
- fix SPL boot issue due to early dbgmcu_init() call - fix SPL boot issue due to dcache memory region configuration - add support of CONFIG_ENV_IS_IN_MMC - add specific SD/eMMC partition for U-Boot enviromnent - enable env in SPL - use "env info -q" to remove log during boot - remove env location override for dh_stm32mp1 - update management of misc_read - check result of find_mmc_device in stm32prog - use regulator_set_enable_if_allowed for disabling vdd supply in usbphyc - enable CMD_ADTIMG flag to handle Android images - device tree alignment with Linux Kernel v5.8-rc1 - remove hnp-srp-disable for usbotg on dk1 - add reset support to uart nodes on stm32mp15x - use correct weak function name spl_board_prepare_for_linux - use cd-gpios for ST and DHSOM boards - add seeed studio odyssey-stm32mp157c board support - move ethernet PHY into SoM DT - add DHSOM based DRC02 board support
2020-07-29Merge branch '2020-07-29-add-brcm-ns3-support'Tom Rini
- Add initial Broadcom NS3 SoC support.
2020-07-29arch: arm: use dt and UCLASS_SYSCON to get gic lpi detailsRayagonda Kokatanur
Use device tree and UCLASS_SYSCON driver to get Generic Interrupt Controller (GIC) lpi address and maximum GIC redistributors count. Also update Kconfig to select REGMAP and SYSCON when GIC_V3_ITS is enabled. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29arch: arm: use dt and UCLASS_IRQ to get gic detailsRayagonda Kokatanur
Use device tree and UCLASS_IRQ driver to get following Generic Interrupt Controller (GIC) details, -GIC Distributor interface (GICD) base address and -GIC Redistributors (GICR) base address. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable tee and optee driverRayagonda Kokatanur
Enable tee and optee drivers. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29drivers: tee: broadcom: add optee based bnxt fw load driverVikas Gupta
Add optee based bnxt fw load driver. bnxt is Broadcom NetXtreme controller Ethernet card. This driver is used to load bnxt firmware binary using OpTEE. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: ns3: add development keys used in FITPramod Kumar
Add development keys used in FIT. Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: ns3: add FIT image its filePramod Kumar
Add FIT image its file. Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable FIT configRayagonda Kokatanur
Enable FIT config for NS3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable sp805 watchdog driverRayagonda Kokatanur
Enable sp805 watchdog driver for ns3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable EXT4 and FAT fs supportRayagonda Kokatanur
Enable EXT4 and FAT fs support for ns3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable gpt commandsRayagonda Kokatanur
Enable gpt commands for ns3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable mmc commandsRayagonda Kokatanur
Enable mmc commands for NS3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable BCM IPROC mmc driverRayagonda Kokatanur
Enable BCM IPROC mmc driver ns3. Enable DMA for MMC Host to have better reads and writes. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29dt-bindings: pinctrl: add ns3 pads definitionRayagonda Kokatanur
Add NS3 pads definitions. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable pinctrl driverRayagonda Kokatanur
Enable pinctrl driver for ns3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29gpio: do not include <asm/arch/gpio.h> on TARGET_BCMNS3Rayagonda Kokatanur
As no gpio.h is defined for this architecture, to avoid compilation failure, do not include <asm/arch/gpio.h> for arch bcmns3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29drivers: gpio: add broadcom iproc gpio driver supportRayagonda Kokatanur
Add gpio driver support for Broadcom iproc-based socs. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29MAINTAINERS: update maintainers for broadcom ns3 platformRayagonda Kokatanur
Update MAINTAINERS for broadcom ns3 platform (TARGET_NS3). Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29doc: add README doc for bcmns3 platformRayagonda Kokatanur
Add README doc for bcmns3 platform. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29include/configs: ns3: add support for flashing imagesBharat Gooty
Add support for flashing images into QSPI and eMMC. Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29include/configs: ns3: add env variables for Linux bootBharat Gooty
Add env variables and commands for booting Linux. Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: ns3: limit U-boot relocation within 16MB memoryBharat Kumar Reddy Gooty
By default relocation happens to a higher address of DDR, i.e, DDR start + DDR size. U-Boot shall be used to collect the ramdump. Restrict U-Boot to use only the 16MB memory, so that this memory can be reserved. Limit relocation to happen within 16MB memory, start 0xFF00_0000 and end 0x1_0000_0000 Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: ns3: define ddr memory layoutRayagonda Kokatanur
Add both DRAM banks memory information and the corresponding MMU page table mappings. Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29dt-bindings: memory: ns3: add ddr memory definitionRayagonda Kokatanur
Add ddr memory definitions. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable GIC_V3 ITSRayagonda Kokatanur
Enables the Generic Interrupt Controller (GIC) V3 Interrupt Translation Service (ITS) Locality-specific Peripheral Interrupts (LPI) configuration table and LPI table. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: ns3: program GIC LPI tablesRayagonda Kokatanur
U-boot programs the GIC LPI configuration tables and enables the LPI table. Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: ns3: default reset type to L3Rayagonda Kokatanur
Default "reset" from U-Boot to L3 reset. "reset" command with argument will trigger L1 reset. Signed-off-by: Rajesh Ravi <rajesh.ravi@broadcom.com> Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: ns3: add api to save boot parameters passed from BL31Abhishek Shah
Add API to save boot parameters passed from BL31 Use assembly implementation of save_boot_params instead of c function. Because generally ATF does not set up SP_EL2 on exiting. Thus, usage of a C function immediately after exiting with no stack setup done by ATF explicitly, may cause SP_EL2 to be not sane, which in turn causes a crash if this boot was not lucky to get an SP_EL2 in valid range. Replace C implementation with assembly one which does not use stack this early, and let u-boot to set up its stack later. Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com> Signed-off-by: Rajesh Ravi <rajesh.ravi@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29dt-bindings: memory: ns3: add memory definitionsRayagonda Kokatanur
Add NS3 memory definitions. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29configs: ns3: enable clock subsystemRayagonda Kokatanur
Enable clock subsystem for ns3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29arm: cpu: armv8: add L3 memory flush supportRayagonda Kokatanur
Add L3 memory flush support for NS3. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: ns3: add support for Broadcom Northstar 3Rayagonda Kokatanur
Add support for Broadcom Northstar 3 SoC. NS3 is a octo-core 64-bit ARMv8 Cortex-A72 processors targeting a broad range of networking applications. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29Merge branch '2020-07-28-misc-soc-improvements'Tom Rini
- Assorted MediaTek improvements - s5p4418 support - QEMU ARM platform improvements - Qualcomm IPQ40xx support
2020-07-29board: mediatek: Add support for UniElec U7623 boardDavid Woodhouse
This is an MT7623A-based board, very similar to the Banana Pi R2. http://www.unielecinc.com/q/news/cn/p/product/detail.html?qd_guid=OjXwKCaRlN Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-29board: mediatek: Use CONFIG_DEFAULT_FDT_FILE for default environmentDavid Woodhouse
Rather than hard-coding it to the Banana Pi R2. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-29board: mediatek: fix mmc_get_boot_dev() for platforms without external SDDavid Woodhouse
On the UniElec U7623 board there is no external SD slot and the preloader doesn't fill in the magic field at 0x81dffff0 to indicate that it was booted from eMMC. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-29arm: add (default) config for nanopi2 boardStefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - Configuration changed, mainly several "CONFIG_..." moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig and USB related configs removed because USB is not supported yet. - s5p4418_nanopi2.h: "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable. - pinctrl is supported now, therefore "CONFIG_PINCTRL=y" added to s5p4418_nanopi2_defconfig. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29arm: add support for SoC s5p4418 (cpu) / nanopi2 boardStefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - SPL not supported yet --> no spl-dir in arch/arm/cpu/armv7/s5p4418/. Appropriate line in Makefile removed. - cpu.c: '#include <cpu_func.h>' added. - arch/arm/cpu/armv7/s5p4418/u-boot.lds removed, is not required anylonger. - "obj-$(CONFIG_ARCH_NEXELL) += s5p-common/" added to arch/arm/cpu/armv7/Makefile since s5p-common/pwm.c is used instead of drivers/pwm/pwm-nexell.c. - s5p4418.dtsi: '#include "../../../include/generated/autoconf.h"' removed, is not necessary, error at out-of-tree building. '#ifdef CONFIG_CPU_NXP4330'-blocks (2x) removed. Some minor changes regarding mmc. 'u-boot,dm-pre-reloc' added to dp0 because of added DM_VIDEO support. - board/s5p4418/ renamed to board/friendlyarm/ - All s5p4418-boards except nanopi2 removed because there is no possibility to test the other boards. - Kconfig: Changes to have a structure like mach-bcm283x (RaspberryPi), e.g. "config ..." entries moved from/to other Kconfig. - "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable. - nanopi2/board.c: All getenv(), getenv_ulong(), setenv() and saveenv() renamed to env_get(), env_get_ulong(), env_set() and env_save(), respectively. MACH_TYPE_S5P4418 is not defined anymore, therefore appropriate code removed (not necessary for DT-kernels). - nanopi2/onewire.c: All crc8() renamed to crc8_ow() because crc8() is already defined in lib/crc8.c (with different parameters). - dts: "nexell,s5pxx18-i2c" used instead of "i2c-gpio", i2c0 and i2c1 added. gmac-, ehci- and dwc2otg-entries removed because the appropriate functionality is not supported yet. New mmc-property "mmcboost" added. s5p4418-pinctrl.dtsi: gmac-entries removed, mmc- and i2c-entries added. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29video: add nexell video driver (display/video driver)Stefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - nexell_display.c: Changed to DM, CONFIG_FB_ADDR can not be used anymore because framebuffer is allocated by video_reserve() in video-uclass.c. Therefore code changed appropriately. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). - livetree API (dev_read_...) is used instead of fdt one (fdt...). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29video: add nexell video driver (soc: dpc, makefile)Stefan Bosch
Low level functions for DPC (Display Controller) and Makefile for all nexell video low level functions. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29video: add nexell video driver (soc: lvds, hdmi)Stefan Bosch
Low level functions for LVDS and HDMI display interfaces. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29video: add nexell video driver (soc: mlc, mipi)Stefan Bosch
Low level functions for MLC (Multi Layer Control) and MIPI (Mobile Industry Processor Interface). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
generated by cgit (git 2.34.1) at 2024-12-23 19:05:59 +0000