summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-30dm: pci: Check board information pointer in decode_regions()Bin Meng
PCI enumeration may happen very early on an x86 board. The board information pointer should have been checked in decode_regions() as its space may not be allocated yet. With this commit, Intel Galileo board boots again. Fixes: 664758c ("pci: Fix decode regions for memory banks") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-03-30efi_stub: Fix GDT_NOTSYS checkAlexander Graf
The get_codeseg32() wants to know if a passed in descriptor has flag GDT_NOTSYS set (desc & GDT_NOTSYS), not whether desc and GDT_NOTSYS are not != 0 (desk && GDT_NOTSYS). This is an obvious typo. Fix it up. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-03-30riscv: ae250: Support DT provided by the board at runtimeRick Chen
Enable CONFIG_OF_BOAD to support delivery dtb to u-boot at run time instead of embedded. There are two methods to delivery dtb. 1 Pass from loader: When u-boot boot from RAM, gdb or loader can pass dtb via a2 to u-boot dynamically. Of course gdb or loader shall be in charge of dtb delivery. 2 Configure CONFIG_SYS_FDT_BASE: It can be configured as RAM or ROM base statically, no mater u-boot boot from RAM or ROM. If it was configured as ROM base, dtb can be burned into ROM(spi flash) by spi driver. Meanwhile remove CONFIG_SKIP_LOWLEVEL_INIT which is useless in nx25-ae250 configuration. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30configs: Drop CONFIG_MMC_NDS32Rick Chen
Remove CONFIG_MMC_NDS32 from the three config (adp-ae3xx_defconfig, adp-ag101p_defconfig, nx25-ae250_defconfig). Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30mmc: ftsdc010: Merge nds32_mmc to ftsdc010Rick Chen
nsd32_mmc was created to support ftsdc010 dm. It is not necessary to separate both, so merge it to ftsdc010. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30mmc: ftsdc010: Migrate CONFIG_FTSDC010_SDIO to KconfigRick Chen
Convert CONFIG_FTSDC010_SDIO to Kconfig. So CONFIG_FTSDC010_SDIO can also be removed from config_whitelist.txt. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30Drop CONFIG_FTSDC010_NUMBERRick Chen
CONFIG_FTSDC010_NUMBER was not used anymore, can be removed now. So CONFIG_FTSDC010_NUMBER can also be removed from config_whitelist.txt. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30Drop CONFIG_FTSDC010_BASERick Chen
After drop non-dm code of ftsdc010, the sd register base definition can be droppped now. So CONFIG_FTSDC010_BASE and CONFIG_FTSDC010_BASE_LIST both can be removed from config_whitelist.txt Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30board: Drop ftsdc010 non-dm codeRick Chen
Remove board_mmc_init() in adp-ag101p, adp-ae3xx and nx25-ae250 boards. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30mmc: ftsdc010: Drop non-dm codeRick Chen
Only three defconfig(adp-ag101p_defconfig, adp-ae3xx_defconfig, nx25-ae250_defconfig) set CONFIG_FTSDC010=y. And they all also enable CONFIG_DM_MMC. So the non-dm code of ftsdc010 can be dropped now. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30nds32: dts: AG101P support sd High-Speed modeRick Chen
Enable High-Speed mode with cap-sd-highspeed in dts Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: dts: AE250 support sd High-Speed modeRick Chen
Enable High-Speed mode with cap-sd-highspeed in dts. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30mmc: ftsdc010: Support High-Speed modeRick Chen
ftsdc010 dm driver has been disable High-Speed mode as default to work around Andes AE3XX platform's problem, because of it does not support High-Speed mode in commit id 73cd56b2df213c629191139e5c6705e069b6214f. But other platforms or SoCs maybe support this function. So High-Speed mode can be enabled from dts with cap-mmc-highspeed or cap-sd-highspeed property. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30doc: ae250: Describe riscv-linux booting via u-bootRick Chen
Simply record riscv-linux booting steps and messages from bbl via u-boot on QEMU in README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30tools: mkimage: Support RISC-V archRick Chen
Add riscv uimage arch to support riscv-linux booting. It can Convert riscv-linux to image which can be booted by bootm command. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: bootm: Remove ATAGSRick Chen
ATAGS is not supported and will be replaced by DT in riscv-linux. So can be removed now. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: bootm: Support to boot riscv-linuxRick Chen
riscv-linux should use BBL (Berkeley bootloader) for loading the Linux kernel. U-Boot can play as FSBL(first stage bootloader) to boot BBL and riscv-linux. In BBL's init_first_hart(), it will pass dtb with a1. So implement bootm to pass arguments to BBL correctly. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: checkpatch: Fix static const char * array declarationsRick Chen
It is reported by checkpatch.pl WARNING: static const char * array should probably be static const char * const Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: checkpatch: Fix missing a blank line after declarationsRick Chen
It is reported by checkpatch.pl WARNING: Missing a blank line after declarations. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: checkpatch: Fix alignment should match open parenthesisRick Chen
It is reported by checkpatch.pl. CHECK: Alignment should match open parenthesis Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: checkpatch: Fix use of volatileRick Chen
It is reported by checkpatch.pl WARNING: Use of volatile is usually wrong: see Documentation/process/volatile-considered-harmful.rst Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30riscv: checkpatch: Fix Macro argument reuseRick Chen
It is CHECK reported by checkpatch.pl CHECK: Macro argument reuse 'PTE' - possible side-effects? Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-29Merge git://git.denx.de/u-boot-rockchipTom Rini
2018-03-28rockchip: sdhci: support 8bit bus-widthPhilipp Tomsich
The Rockchip-specific SDHCI wrapper does not process the 'bus-width' property in the SDHCI node. Consequently, the bus is always kept in 4bit mode, even if 8bit wide operation is available, supported and requested in the DTS. This change adds processing of the 'bus-width' property and sets the host capability flag for an 8bit wide bus, if set to 8. As the logic in sdhci.c does not support clearing the 4bit capability, we assume that 4bit operation is always supported. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28rockchip: mmc: update MAINTAINERSPhilipp Tomsich
The Rockchip-specific wrappers to the DW-MMC and the SDHCI driver were not covered as part of what's maintained by the architecture maintainers. Add them here. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28rockchip: defconfig: puma-rk3399: enable DMA for SDHCI controllerPhilipp Tomsich
For the RK3399-Q7, we have a fast eMMC connected in an 8 bit wide configuration to the SDHCI controller (sdhci@fe330000). Enable DMA within the SDHCI driver to get the best performance out of it. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28rockchip: rk3399: set fdtfileMark Kettenis
Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28rockchip: clk: rk3188: update dpll settings to make EMAC workAlexander Kochetkov
The patch set dpll settings for 300MHz to values used by binary blob[1]. With new values dpll still generate 300MHz clock, but EMAC work. Probably with new values dpll generate more stable clock. dpll on rk3188 provide clocks to DDR and EMAC. With current dpll settings EMAC doesn't work on radxa rock. EMAC sends packets to network, but it doesn't receive anything. ifconfig shows a lot of framing errors. [1] https://github.com/linux-rockchip/u-boot-rockchip/blob/u-boot-rk3288/ tools/rk_tools/3188_LPDDR2_300MHz_DDR3_300MHz_20130830.bin Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28video: rk3288_mipi: Combine NULL check into IS_ERR_OR_NULL()Punit Agrawal
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28video: rk3288_mipi: check in rk_mipi_ofdata_to_platdataHeinrich Schuchardt
The error checking should also catch the case that no range has beeen defined. syscon_get_first_range() returns NULL if no range is defined. cf. rk3399_mipi.c Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28video: rk3399_mipi: Combine NULL check into IS_ERR_OR_NULL()Punit Agrawal
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28video: rk3399_mipi: correct error checkingHeinrich Schuchardt
Pointers are never negative. Use macro IS_ERR() for checking. cf. rk3288_mipi.c Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28usb: rockchip: remove duplicate assignement.Heinrich Schuchardt
Assigning f_rkusb->reboot_flag twice doesn't make sense. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28driver: ram: rockchip: rk3399: missing counter incrementHeinrich Schuchardt
If we want to check the duration we need to increment the counter. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28rockchip: pinctrl: rk3188: Move the iomux definitions into pinctrl-driverAlexander Kochetkov
Clean the iomux definitions at grf_rk3188.h, and move them into pinctrl-driver for resolving the compiling error of redefinition. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28rockchip: pinctrl: rk3036: Move the iomux definitions into pinctrl-driverAlexander Kochetkov
Clean the iomux definitions at grf_rk3036.h, and move them into pinctrl-driver for resolving the compiling error of redefinition. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28rockchip: pinctrl: rk3399: add support for I2C[123467]Philipp Tomsich
This adds support for the (to date unsupported) I2C controllers 1~4 and 6~7 (i.e. now all controllers except I2C5, which is not accessible on the RK3399-Q7, are supported by pinctrl). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28rockchip: pinctrl: rk3399: fix GPIO2B1 and GPIO2B2 shift valuePhilipp Tomsich
The shift values for GPIO2B1 and GPIO2B2 had in fact referred to GPIO2B0 and GPIO2B1, respectively. This substitutes the correct values. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-25Merge git://git.denx.de/u-boot-ubiTom Rini
2018-03-25Merge git://git.denx.de/u-boot-spiTom Rini
2018-03-25Merge git://git.denx.de/u-boot-i2cTom Rini
2018-03-25Merge tag 'xilinx-for-v2018.05' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2018.05 - Fix mkimage recognition - Update all my fragments ZynqMP: - Use clk driver - Support loading elfs in el1 - Various DTS and defconfig changes - Enable newer pmufw versions - Support more clocks - Remove ep108 - Secure image support - Fix memtest setup Zynq: - Enabling watchdog driver - Support more clocks - defconfig changes fpga: - Simplify error path net: - GMII case update
2018-03-24Convert CONFIG_UBI_SILENCE_MSG to KconfigPetr Vorel
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
2018-03-24Convert CONFIG_UBIFS_SILENCE_MSG to KconfigPetr Vorel
Introduce another difference from upstream (kernel) source in fs/ubifs/super.c: adding preprocessor condition as y variable in mount_ubifs() depends on CONFIG_UBIFS_SILENCE_MSG: fs/ubifs/super.c:1337:15: error: variable ?y? set but not used [-Werror=unused-but-set-variable] long long x, y; Not setting CONFIG_UBIFS_SILENCE_MSG in am335x_igep003x_defconfig and igep0032_defconfig. Although it was defined in their config headers, it depends on CMD_UBIFS which is not set for them. Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Heiko Schocher <hs@denx.de>
2018-03-24ubifs: Reintroduce using CONFIG_UBIFS_SILENCE_MSGPetr Vorel
Use of CONFIG_UBIFS_SILENCE_MSG was added in 147162dac6 ("ubi: ubifs: Turn off verbose prints") Then it was removed in ff94bc40af ("mtd, ubi, ubifs: resync with Linux-3.14") Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
2018-03-23omap3: spi: Correct ti, pindir-d0-out-d1-in parsingSjoerd Simons
The ti,pindir-d0-out-d1-in property is not expected to have a value according to the device-tree binding, so treat it as a boolean not a uint property. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-03-23Merge git://git.denx.de/u-boot-arcTom Rini
Alexey: 1. Significantly rework cache-related functionality. In particular that fixes coherency problems in some corner-cases, allows us to enable and disable caches in run-time and still have properly running system, finally support execution from real flash (before we used to run from DDR from the very beginning). 2. Remove string routines implemented in assembly. That allows us to build and run U-Boot on wide range of ARC cores with different configurations. I.e. whatever tuning is used on GCC's command-line we'll get code for desired flavor of ARC. Otherwise for each and every corner-case we would need to add ifdefs in assembly code to accommodate missing instructions etc. 3. Get use of GCC's garbage collector which helps to slim-down resulting image quite a bit. 4. Also now we may disable U-Boot self-relocation for ARC if needed either by platform or for debugging purposes.
2018-03-23ARC: bootm: Refactor GO and PREP subcommands implementationEugeniy Paltsev
Refactor GO and PREP subcommands implementation for a simpler override in the boards platform code. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-23MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragmentsMichal Simek
Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23tools: xilinx: Fix zynq/zynqmp image recognitionMichal Simek
There is an issue to recognize zynq or zynqmp image because header checking is just the same. That's why zynqmp images are recognized as zynq one. Check unused fields which are initialized to zero in zynq format (__reserved1 0x38 and __reserved2 0x44) which are initialized for zynqmp. This should ensure that images are properly recognized by: ./tools/mkimage -l spl/boot.bin Also show image type as ZynqMP instead of Zynq which is confusing. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Alexander Graf <agraf@suse.de>
generated by cgit (git 2.34.1) at 2025-01-01 02:06:36 +0000