summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-29video: meson: dw-hdmi: add EDID mode filtering to only select supported modesNeil Armstrong
Add support for the new mode_valid() display op to filter out unsupported display DMT timings. This is useful when connected to 4k displays, since we only support DMT monitors up to 1920x1080, the 4k native timings are discarded to select supported timings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-29video: display: use edid_get_timing_validate() variant to filter supported ↵Neil Armstrong
EDID modes Introduce a new display op, mode_valid() to be used with the newly introduced edid_get_timing_validate() function, to filter supported monitor timings if handled by the display driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-29edid: add edid_get_timing_validate() variant to filter out edid modesNeil Armstrong
The original edid_get_timing() function returns the first valid timing, but on some plaforms, we could only supports a subset of the listed monitot's navite timing. Let's introduce a edid_get_timing_validate() adding a mode_valid callback including a private cookie pointer. If the callback returns false, the current timing is discared and the next one is checked. If no valid & supported timings are found, the function would return an error. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-29bmp_logo: support CONFIG_DM_VIDEOHeiko Schocher
in case of bmp_logo, the video_bmp driver is used for drawing a bmp logo. This driver supports only "full" bmp data. Adding a logo with the bmp_logo tool to u-boot binary adds currently only real data and drops the bmp header. This patch adds now the full bmp data to the u-boot binary, so video_bmp driver works with the logo embedded into u-boot. Fixed also some checkpatch error poping up with this patch. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29video, simple_panel: add lg,lb070wv8 displayHeiko Schocher
add "lg,lb070wv8" display to compatible node. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29configs: colibri-imx6ull: switch to DM_VIDEOIgor Opaniuk
Use CONFIG_DM_VIDEO=y by default for Colibri iMX6ULL. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29ARM: dts: colibri-imx6ull: extend lcdif nodeIgor Opaniuk
Provide proper display timings for lcdif node, used by mxsfb DM_VIDEO enabled framebuffer driver. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29colibri-imx6ull: support building with DM_VIDEO=yIgor Opaniuk
1. This fixes linking issues when building with DM_VIDEO enabled mxsfb driver. 2. Provide proper defines for both VIDEO=y and DM_VIDEO=y. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29configs: colibri_imx7: enable DM_VIDEOIgor Opaniuk
Enable DM_VIDEO support for Colibri iMX7 NAND version. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29ARM: dts: colibri_imx7: Fix lcdif node definitionIgor Opaniuk
Fix lcdif DT node and make it conform to the structure defined in the Linux devicetree bindings [1]. Currently there is support only for old style lcdif node definitions. [1] https://www.kernel.org/doc/Documentation/devicetree/bindings/display/mxsfb.txt Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29video: mxsfb: fix mxsfb fbdev binding issuesIgor Opaniuk
Add support for display and bits-per-pixel properties. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29colibri_vf: enable DM_VIDEOIgor Opaniuk
Enable DM_VIDEO for Colibri VF. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29ARM: dts: colibri_vf: Add dcu0 nodeIgor Opaniuk
Add dumb node for NXP Display Control Unit0(DCU), which permits DM_ENABLED converted driver to be probed. Currently no display timings are provided in this node. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29video: fsl_dcu_fb: add DM_VIDEO supportIgor Opaniuk
Extend the driver to build with DM_VIDEO enabled. DTS files must additionally include 'u-boot,dm-pre-reloc' property in soc and child nodes to enable driver binding to fsl_dcu_fb device. Currently display timings aren't obtained from DT. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29video: fsl_dcu_fb: refactor init functionsIgor Opaniuk
Move dcu-related code to fsl_dcu_probe_common, keep in video_hw_init() only legacy video stack (filling GraphicPanel struct etc.). Add wrappers for all init functions, that will let to provide struct fb_info as an additional param (needed for further moving it from the global scope to driver private data struct in DM converted driver). Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-27Merge branch '2019-07-26-ti-imports'Tom Rini
- Bring in the rest of the J271E platform - Various OMAP3/AM3517, DA850 fixes
2019-07-27env: ti: boot: Use ttyS2 instead of ttyO2Sam Protsenko
ttyO2 console enables legacy CONFIG_SERIAL_OMAP driver in kernel. Nowadays it's preferred to use the generic CONFIG_SERIAL_8250_OMAP driver, which being enabled via ttyS2 console. Both drivers are enabled in multi_v7_defconfig and in omap2plus_defconfig, for compatibility reasons. Let's switch to ttyS2 console, to be sure that standard 8250 serial driver is used. Similar behavior can be also achieved by enabling CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP option in kernel, but it's better not to rely on that, as it can be disabled or removed after transitional period. Right now on DRA7/AM57x platforms the 8250-omap driver is being probed first, and omap-serial driver is only probed if the first one failed. It can be seen from uart3 definition in arch/arm/boot/dts/dra7-l4.dtsi: compatible = "ti,dra742-uart", "ti,omap4-uart"; So the kernel already uses 8250 driver. This change basically allows kernel developers to throw away the omap-serial driver and associated compatibility options. Similar discussions [1,2] have started several years ago, so it should be safe to do that now. [1] https://patchwork.kernel.org/patch/6198471/ [2] http://processors.wiki.ti.com/index.php/Sitara_Linux_UART_-_Switching_to_8250_Driver Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Andrew F. Davis <afd@ti.com> [trini: Update omap5_uevm] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-27arm: am57xx: Allow bootm to load larger kernelsSam Protsenko
linux-mainline with multi_v7_defconfig + Android configs takes more space than regular TI Android kernel and bootm will fail to load it. Let's increase max kernel size up to 64 MiB to make it possible to run such kernel. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-27ARM: da850-evm: Remove dead/unneeded codeAdam Ford
The DA8850-evm supports DM_I2C and boots with SPL_DM, so we can drop some of the code which disables DM_I2C in SPL. This patch removes some #undef's now rendered obsolete. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27ARM: omap3/omap35_logic: Fix broken Logic PD Torpedo bootingAdam Ford
The SOM-LV and Torpedo boards are very similar, but something happened growing SPL enough to break the Torpedo. The SOM-LV board were not doing alias sequencing during SPL and they continue to work while something broke the Torpedo. This patch disables SPL_DM_SEQ_ALIAS allowing it to boot again. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTSAdam Ford
Re-sync all Logic PD OMAP35 and AM/DM37 boards with Kernel 5.2.1 Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27ARM: da850evm: Remove legacy OHCI referencs and unify platformAdam Ford
OHCI was added with DM_USB support, so there are a few unneeded items in the header file that can be removed. This also unifies da850evm with NOR and NAND booting options so all have OHCI support. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate da850_am18xxevm] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-27ARM: am3517_evm: Fix pin muxing to enable EHCI Host in the futureAdam Ford
This patch enables the pinmuxing to support gpio_57 for phy reset and fixes the pinmuxing for the ECHI tranceiver. The clocks don't appear to by fully enabled yet, so OMAP-EHCI on am3517 is still not yet working, but we're one step closer. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27ARM: omap3_logic & omap35_logic: Disable OMAP EHCI for TorpedoAdam Ford
The OMAP35 and AM/DM37 Torpedo boards do not have a USB tranceiver connected to the USB host port, so this patch removes it from the defconfig files. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27ARM: omap3_logic: Enable OMAP EHCI support for SOM-LV BoardsAdam Ford
The SOM-LV boards support the OMAP EHCI driver using port 2. With the driver updated to support device tree, this patch sets the corresponding pin muxing for the tranceiver as well as the reset pin. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27Merge tag 'u-boot-imx-20190719' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20190719 - CCF for i.MX6 - nandbcb command to write SPL into NAND - Switch to DM (i.MX28) - Boards: Toradex, engicam, DH - Fixes for i.MX8 - Fixes for i.MX7ULP Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
2019-07-27Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- fix for fsl_qspi read timeout (Thomas) - spi-mem read data size fix (Ye Li) - SiFive SPI driver, mmc_spi flags (Bhargav, Anup) - Micron spi-nor parts (Ashish) - MT7629 spi-mem driver(Weijie)
2019-07-26ARM: am3517-evm: Remove non-DM legacy codeAdam Ford
With both SPL and U-Boot now supporting DM, we can start removing legacy code. This patch removes the legacy MMC initalization and legacy I2C initialization since both are now available via DM and device tree. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-26ARM: am3517-evm: Migrate to SPL_OF_CONTROLAdam Ford
Like the other Logic PD OMAP35/DM37 boards, this board has device tree enabled for U-Boot. This patch converts the board to enable SPL_OF_CONTROL and further shrinks the device tree in SPL to limit it to UART3 (console), MMC1, i2c1, and GPIO4 (for mmc1 CD and WP). There appears to be a bug in minicom so users may need to switch the minicom terminal emulation to ANSI from VT102 due to the junk that gets pushed out of the UART on startup. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-26ARM: da850-evm: Remove repeated pinmuxing callsAdam Ford
arch_cpu_init() initializes the pinmuxing which is called fairly early in the start sequences, so the board_init function doesn't need to do it again. This patch removes the call from board_init. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-26ARM: da850-evm: Remove duplicate UART initializationAdam Ford
The Low Level init functions start the UART, so it doesn't need to happen during board_init. This patch removes it from board_init. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-26ARM: am3517-evm: Remove manual ethernet reset codeAdam Ford
The reset line going to the ethernet controller is controlled by a global reset controlling multiple peripherals. There is no need to manually invoke the reset. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-26ARM: am3517-evm: Enable DM_PMIC and DM_REGULATOR functionsAdam Ford
The PBIAS regulator is available on OMAP3's, and it's shared on the AM35, so this patch enables that in U-Boot along with GPIO based regulators. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-26ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay valuesFaiz Abbas
Update the MMC2_HS200_MANUAL1 iodelay values to match with the latest dra76x data manual[1]. Also this particular pinctrl-array is using spaces instead of tabs for spacing between the values and the comments. Fix this as well. [1] http://www.ti.com/lit/ds/symlink/dra76p.pdf Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-26ARM: dts: am57xx: Disable voltage switching for SD cardFaiz Abbas
If UHS speed modes are enabled, a compatible SD card switches down to 1.8V during enumeration. If after this a software reboot/crash takes place and on-chip ROM tries to enumerate the SD card, the difference in IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card. The fix for this is to have support for power cycling the card in hardware (with a PORz/soft-reset line causing a power cycle of the card). Because the beaglebone X15 (rev A,B and C), am57xx-evms and am57xx-idks don't have this capability, disable voltage switching for these boards. The major effect of this is that the maximum supported speed mode is now high speed(50 MHz) down from SDR104(200 MHz). Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-26ARM: dts: am574x-idk: Add pinmuxes for mmc1 and mmc2Faiz Abbas
Sync with kernel dts by adding pinmuxes for mmc1 and mmc2. This fixes an issue where mmc2 (eMMC) was coming up in HS52 mode instead of the highest DDR52 mode. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-26ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullupFaiz Abbas
During a short period when the bus voltage is switched from 3.3v to 1.8v, (to enumerate UHS mode), the mmc module is disabled and the mmc IO lines are kept in a state according to the programmed pad mux pull type. According to 4.2.4.2 Timing to Switch Signal Voltage in "SD Specifications Part 1 Physical Layer Specification Version 5.00 February 22, 2016", the host should hold CLK low for at least 5ms. In order to keep the card line low during voltage switch, the pad mux of mmc1_clk line should be configured to pull down. Add a new pinctrl group for clock line without pullup to be used in boards where mmc1_clk line is not connected to an external pullup. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-26configs: j721e_evm_a72: Add initial supportLokesh Vutla
Add initial defconfig support for J721e that runs on A72. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Add MAINTAINERS entry] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-26configs: j721e_evm_r5: Add initial supportLokesh Vutla
Add initial defconfig support for J721e that runs on R5. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Add MAINTAINERS file] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-26arm: dts: k3-j721e: Add r5 specific dt supportLokesh Vutla
Add initial support for dt that runs on r5. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-26arm: dts: k3-j721e: Add initial support for common processor boardLokesh Vutla
Common Processor board is the baseboard that has most of the actual connectors, power supply etc. A SOM (System on Module) is plugged on to the common processor board and this contains the SoC, PMIC, DDR and basic highspeed components necessary for functionality. Add initial dt support for this common processor board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26arm: dts: ti: Add Support for J721E SoCLokesh Vutla
Add initial SoC definition for J721E SoC. Kernel dts posted here: https://lore.kernel.org/lkml/20190522161921.20750-1-nm@ti.com/ Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721ELokesh Vutla
Add pinctrl macros for J721E SoC. These macro definitions are similar to that of AM6, but adding new definitions to avoid any naming confusions in the soc dts files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-26mmc: am654_sdhci: Separate J721E compatible into 8bit and 4bit versionsFaiz Abbas
The j721e 4 bit instances don't have a hard DLL and therefore don't need any DLL related configurations. Split the compatibles into an 8 bit and a 4 bit one. Add a private flags field which can be used to check if the DLL is present and don't register the set_ios_post callback for the 4 bit compatible instances. Also update the compatibles in k3-j721e-main.dtsi to avoid breaking boot with the new compatibles. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26board: ti: j721e: Enable fixing up msmc sram nodeSuman Anna
Create a ft_board_setup() api that gets called as part of DT fixup before jumping to kernel. In this ft_board_setup() call fdt_fixup_msmc_ram that update msmc sram node. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26board: ti: j721e: Add board support for j721e evmLokesh Vutla
Add board specific initialization for j721e evm Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-26armv8: K3: j721e: Add custom MMU supportSuman Anna
The A72 U-Boot code loads and boots a number of remote processors including the C71x DSP, both the C66_0 and C66_1 DSPs, and the various Main R5FSS Cores. Change the memory attributes for the DDR regions used by the remote processors so that the cores can see and execute the proper code. A separate table based on the current AM65x table is added for J721E SoCs, since the number of remote processors and their DDR usage will be different between the two SoC families. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26armv7R: K3: j721e: Load SYSFW binary and config from boot mediaAndreas Dannenberg
Use the System Firmware (SYSFW) loader framework to load and start the SYSFW as part of the J721E early initialization sequence. While at it also initialize the MCU_UART0 pinmux as it is used by SYSFW to print diagnostic messages. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26armv7R: K3: j721e: Shut down R5 core after ATF startup on A72Lokesh Vutla
Populate the release_resources_for_core_shutdown() api with shutting down r5 cores so that it will by called just after jumping to ATF. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26armv7R: K3: j721e: Store boot index from ROMAndreas Dannenberg
Obtain the boot index as left behind by the device boot ROM and store it in scratch pad SRAM for later use before it may get overwritten. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
generated by cgit (git 2.34.1) at 2025-01-17 22:58:24 +0000