summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-22Merge tag 'fixes-for-2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video.git - fix sunxi LCD clock divider - fix splash logo with DM_VIDEO and CONFIG_VIDEO_LOGO - fix splash banner output with DM_VIDEO
2019-09-21Merge tag 'efi-2019-10-rc4-5' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc4 (5) This patch set fixes errors in the UEFI sub-system and adds a function to compare u16 strings which is prerequisite for further patches.
2019-09-21sunxi: video: HDMI: Fix LCD clock dividerMark Kettenis
Currently we may end up with an LCD clock divider that differs from the HDMI PHY clock divider if we can't exactly match the pixel clock. Fix this by using DIV_ROUND_UP to calculate the divider. This works since the PLL is chosen such that the resulting pixel clock is never higher than the requested pixel clock. Fixes: 1feed358ed15 ("sunxi: video: HDMI: Fix clock setup") Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2019-09-21splash: fix splash banner outputAnatolij Gustschin
Old splash code in cfb_console driver displayed U-Boot version string by default. Restore this behaviour for DM_VIDEO enabled configurations. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reported-by: Fabio Estevam <festevam@gmail.com>
2019-09-21imx: mx6sabreauto: fix splash logo drawingAnatolij Gustschin
Enable BMP code. Also configure white on black for video console. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21imx: colibri_imx6: fix splash logo drawingAnatolij Gustschin
Define "splashimage" variable in the default environment to enable splash screen drawing. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21imx: icore: fix splash logo drawingAnatolij Gustschin
Define "splashimage" variable in the default environment and enable BMP code. Also configure white on black for video console. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21imx: apalis_imx6: fix splash logo drawingAnatolij Gustschin
Define "splashimage" variable in the default environment to enable splash screen drawing. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21imx: mx6sabresd: fix splash logo drawingAnatolij Gustschin
After mxc_ipuv3 DM_VIDEO conversion showing splash image doesn't work. Fix this. Also enable white on black console configuration as it used to be with cfb_console driver. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reported-by: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <festevam@gmail.com>
2019-09-21imx: wandboard: fix splash logo drawingAnatolij Gustschin
After mxc_ipuv3 DM_VIDEO conversion showing splash image doesn't work. Fix this. Also enable white on black console configuration as it used to be with cfb_console driver. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21splash: fix logo drawing if CONFIG_VIDEO_LOGO enabledAnatolij Gustschin
After mxc_ipuv3 DM_VIDEO conversion board configs with enabled CONFIG_VIDEO_LOGO do not show splash screen (previosly drawing splash screen worked via cfb_console driver with CONFIG_VIDEO_LOGO enabled). Use splash_source library for loading splash images when CONFIG_SPLASH_SOURCE is selected, otherwise prepare built-in video logo for drawing. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-20Merge tag 'u-boot-rockchip-20190920' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix rk3288 tinker and evb SPL boot fail - Enable get sn from cpuid for rk3399 rockpro64 board
2019-09-20test: add tests for u16_str<n>cmp()AKASHI Takahiro
New seven test cases for u16_str<n>cmp() are added under Unicode unit test, which should be executed by "ut unicode" command. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20lib: charset: add u16_str<n>cmp()AKASHI Takahiro
u16 version of strcmp(): u16_strncmp() works like u16_strcmp() but only at most n characters (in u16) are compared. This function will be used in my UEFI secure boot patch. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20efi_loader: selftest: enable APPEND_WRITE testsAKASHI Takahiro
Now that APPEND_WRITE is supported, the result check for the only existing test case should be changed to 'todo' to 'error', while two more test cases are added. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20efi_loader: variable: support APPEND_WRITEAKASHI Takahiro
If EFI_VARIABLE_APPEND_WRITE is specified in attributes at efi_set_variable(), specified data will be appended to the variable's original value. Attributes other than APPEND_WRITE should not be modified. With this patch, APPEND_WRITE test in 'variables' selftest will pass. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-09-20efi_loader: incorrect return value form DisconnectControllerHeinrich Schuchardt
DisconnectController() should never return EFI_NOT_FOUND. If EFI_DRIVER_BINDING_PROTOCOL.Stop() fails, return EFI_DEVICE_ERROR. If the driver handle does not expose the EFI_DRIVER_BINDING_PROTOCOL return EFI_INVALID_PARAMETER. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20efi_loader: device_path: support Sandbox's "host" devicesAKASHI Takahiro
Sandbox's "host" devices are currently described as UCLASS_ROOT udevice with DEV_IF_HOST block device. As the current implementation of efi_device_path doesn't support such a type, any "host" device on sandbox cannot be seen as a distinct object. For example, => host bind 0 /foo/disk.img => efi devices Scanning disk host0... Found 1 disks Device Device Path ================ ==================== 0000000015c19970 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b) 0000000015c19d70 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b) => efi dh Handle Protocols ================ ==================== 0000000015c19970 Device Path, Device Path To Text, Device Path Utilities, Unicode Collation 2, HII String, HII Database, HII Config Routing 0000000015c19ba0 Driver Binding 0000000015c19c10 Simple Text Output 0000000015c19c80 Simple Text Input, Simple Text Input Ex 0000000015c19d70 Block IO, Device Path, Simple File System As you can see here, efi_root (0x0000000015c19970) and host0 device (0x0000000015c19d70) have the same representation of device path. This is not only inconvenient, but also confusing since two different efi objects are associated with the same device path and efi_dp_find_obj() will possibly return a wrong result. Solution: Each "host" device should be given an additional device path node of "vendor device path" to make it distinguishable. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20Merge branch '2019-09-19-master-imports'Tom Rini
- Coding style corrections in some RTC drivers. - Small doc updates. - Regression fix in part_test_dos() - Regression fix on TI OMAP WDTs. - Document deadline for CONFIG_DM migration. - Switch Travis-CI to "xenial" release.
2019-09-19dm: MIGRATION: Add migration plan for CONFIG_DMHeinrich Schuchardt
For many sub-systems we already require the driver model to be used. Yet there is still a handful of boards that do not have CONFIG_DM enabled. We should make CONFIG_DM compulsory with release v2020.01 Conversion dates for CONFIG_DM_SPL and CONFIG_DM_TPL are yet to be defined. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-09-19watchdog: omap_wdt: Fix WDT target reset when booted from emmcSuniel Mahesh
AM335X based beaglebone black target gets reset by DM converted watchdog if booted from emmc around 60sec. Fixed this by moving driver's private struct variable initialization at different places in the driver to driver's probe. Tested on Beaglebone Black. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Fixes: 7659ea32 ("watchdog: omap_wdt: Convert watchdog driver to use DT and DM") Reported-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Suniel Mahesh <sunil.m@techveda.org> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-09-19scrapyard: Delete this file and scriptTom Rini
The README.scrapyard file has been inconsistently updated. While well intentioned, bad data is worse than no data, and in this case a pointer to use the history that git provides. Remove the current content and the script that would update it from time to time as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-19disk: part_dos: Allocate at least one block size for mbrFaiz Abbas
The blk_dread() following the mbr allocation reads one block from the device. This will lead to overflow if block size is greater than the size of legacy_mbr. Fix this by allocating at least one block size. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-09-19kconfig: doc: Update comment regarding CONFIG_IS_ENABLED(FOO) for TPLLukasz Majewski
This patch adds some commit info for CONFIG_IS_ENABLED(FOO) when used in TPL context. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-09-19doc: fix: Replace SPL_OF_PLATDATA with OF_PLATDATA in examplesLukasz Majewski
The of-plat.rst file till this change has been using This is at best misleading as SPL_OF_PLATDATA is always defined when we want to use this SPL tinification feature (also in U-Boot proper). As a result the OF_PLATDATA SPL specific code is also compiled in when U-Boot proper is build. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-09-19rtc: ds3231/ds3232: fix coding styleBiwen Li
The patch fixes coding style Signed-off-by: Biwen Li <biwen.li@nxp.com>
2019-09-19travis.yml: change Ubuntu version to xenialRamon Fried
trusty is getting old, move to xenial (16.04) to get updated gcc and other tools. Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
2019-09-19rockchip: config: evb-rk3288: enable SPL_STACK_RKever Yang
We need a new STACK in SDRAM instead of SRAM so that the EMMC controller can work properly. The EMMC/SD controller's master is not able to access SRAM area, it can only access DRAM area. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19rockchip: evb-rk3288: Drop explicit SPL_TEXTKever Yang
SPL_TEXT_BASE is 0x0 by default, based on the kconfig definition move in below commit. "configs: move CONFIG_SPL_TEXT_BASE to Kconfig" (sha1: f89d6133eef2e068f9c33853b6584d7fcbfa9d2e) So, don't define it explicitly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19configs: rk3288: Increase bootm lengthJagan Teki
Increase bootm length to 64MB satisfy max gunzip size, even other rockchip and know SoC are following same length check. Reported-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19rockchip: rk3288-tinker: Attach missing peripherals at SPLMichael Trimarchi
Tinker board needs to mux all the sdmmc gpio and activate the regulator connected to bank 7. Remove all the bank that are not in use and mark them as dm,spl so-that it would initialize at SPL. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19configs: tinker: Enable SDRAM, SPL stackJagan Teki
SPL sets up SDRAM while in its board_init_f() function, it is possible for the stack to move there before board_init_r() is reached. So it is required to reserve the stack for SDRAM, with a proper location and size otherwise any operations during SPL handoff would leads to failure. On, this particular context tinker-rk3288 SPL is failing to launch U-Boot proper on SDRAM due to lack of stack. U-Boot SPL 2019.10-rc3-00297-g5ba8b12543 (Sep 12 2019 - 08:50:36 +0530) Trying to boot from MMC1 spl: mmc init failed with error: -110 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### So, enable SPL_STACK_R_ADDR and it's related-config items for SDRAM, SPL stack to setup properly. Reported-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19configs: tinker: Drop explicit SPL_TEXTJagan Teki
SPL_TEXT_BASE is 0x0 by default, based on the kconfig definition move in below commit. "configs: move CONFIG_SPL_TEXT_BASE to Kconfig" (sha1: f89d6133eef2e068f9c33853b6584d7fcbfa9d2e) So, don't define it explicitly. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19rockchip: spi-boot-order: Trival fix to newline missingJagan Teki
newline \n was missed in fdt_path_offset, error loop. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19ram: rk3288: Initialize dram for TPL buildsJagan Teki
Few of the rk3288 boards like tinker, vyasa are using TPL, SPL bootchain so the dram initialization must needed during TPL stage. So add proper ifconstruct to satisfy both TPL, SPL and SPL-only bootchain boards. This eventually fixing TPL to SPL handoff, otherwise missing dram initilaztion at TPL stage would leads to SPL hang. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19configs: vyasa-rk3288: Fix SPL_TEXT_BASEJagan Teki
The initial Vyasa-rk3288 TPL implementation is to reuse the SPL_TEXT_BASE for TPL and SPL as 0x0 and 0xff704000 respectively. But the below commit implements the reverse way of using TEXT_BASE's like 0xff704000 for TPL and 0x0 for SPL and which indeed update the SPL_TEXT_BASE for vyasa-rk3288 board. "rockchip: Kconfig: enable TPL support for rk3328" (sha1: 3f47db0275e0f1c1e89d8f13f8b4cdc86b1038ca) So, fix by dropping the legacy SPL_TEXT_BASE and it will reassign 0x0 by default based on Kconfig definition. Reported-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19rockchip: rk3288: vyasa: Drop ROCKCHIP_BROM_HELPER selectionJagan Teki
ROCKCHIP_BROM_HELPER is selected as if TPL/SPL ROCKCHIP_BACK_TO_BROM has been defined, so drop the explicit enablement for vyasa board. This change is supposed to missed during config move to other locations, and missed to drop the same. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19configs: rockpro64-rk3399: Enable CONFIG_MISC_INIT_R and ROCKCHIP_EFUSEHugh Cole-Baker
This enables reading the cpuid from e-fuse, and deriving a static MAC address from it. Without this, the ethernet interface on the rockpro64 can't be used to boot. Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-16Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add emmc hs200 support - Few bug fixes related to serdes, I2C, ethernet, etc
2019-09-16Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- fix mvebu_a3700_spi clock prescale (Marek Behún) - unmark MXS_SPI, DEPRECATED (Lukasz) - add spi_write_then_read (Jagan) - fix SST26* flash ICs (Eugeniy) - fix soft_spi data abort (Christophe)
2019-09-16doc: driver-model: Update SPI migration statusJagan Teki
Update SPI drivers, driver model conversion status for v2019.10 release. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16mtd: spi-nor: enable protection ops for SST26 flash seriesEugeniy Paltsev
Commit c4e8862308d4 (mtd: spi: Switch to new SPI NOR framework) performs switch from previous 'spi_flash' infrastructure without proper testing/investigations which results in a regressions for SST26 flash series. Enable protection ops for SST26 flash series which were previously enabled by Commit 3d4fed87a5fa (mtd: sf: Add support of sst26wf* flash ICs protection ops) Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16mtd: spi-nor: add missing SST26* flash IC protection opsEugeniy Paltsev
Commit c4e8862308d4 (mtd: spi: Switch to new SPI NOR framework) performs switch from previous 'spi_flash' infrastructure without proper testing/investigations which results in a regressions for SST26 flash series. Add missing SST26* flash IC protection ops which were introduced previously by Commit 3d4fed87a5fa (mtd: sf: Add support of sst26wf* flash ICs protection ops) Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16mtd: spi: Drop sf.cJagan Teki
spi_write_then_read, will manage to do the respective spi_xfer based on the tx_buf, rx_buf so drop the legacy spi_flash_read/write/cm code. Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16mtd: spi_dataflash: Use spi read then writeJagan Teki
Now, we have spi_write_then_read routine that would handle spi_xfer handling based on the tx_buf and rx_buf parameters. So, replace individual flash read/write/cmd transfer call with spi_write_then_read. Cc: Egnite GmbH <info@egnite.de> Cc: Daniel Gorsulowski <daniel.gorsulowski@esd.eu> Cc: Ilko Iliev <iliev@ronetix.at> Cc: Marek Vasut <marex@denx.de> Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Cc: Alison Wang <alison.wang@nxp.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16spi: Add spi_write_then_readJagan Teki
Add support for SPI synchronous write followed by read, this is common interface call from spi-nor to spi drivers. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2019-09-16spi: Kconfig: Unmark DEPRECATED for MXS_SPILukasz Majewski
MXS_SPI driver now partially converted into driver-model, so unmark the DEPRECATED option for the same. Signed-off-by: Lukasz Majewski <lukma@denx.de> [jagan: update the commit message] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16spi: soft_spi: Fix data abort if slave is not probedChristophe Kerello
In case spi_get_bus_and_cs callback is used, spi bus is first probed then slave devices are probed. To avoid a data abort in soft_spi probe function, we need to check that (slave != NULL). If slave is NULL, cs_flags and clk_flags will be initialized with respectively GPIOD_ACTIVE_LOW and 0. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16spi: mvebu_a3700_spi: Fix clock prescale computationMarek Behún
The prescaler value computation can yield wrong result if given 0x1f at the beginning: the value is computed to be 0x20, but the maximum value the register can hold 0x1f, so the actual stored value in this case is 0, which is obviously wrong. Set the upper bound of the value to 0x1f with the min macro. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-15Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
generated by cgit (git 2.34.1) at 2024-12-28 13:46:50 +0000