summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-26board: puma: Get bl31.bin via BL31 and rk3399m0.bin via PMUM0Jagan Teki
Right now puma rk3399 board need to copy bl31-rk3399.bin and rk3399m0.bin into u-boot source directory to make use of building u-boot.itb. So, add environment variable - BL31 for bl31.bin (instead of bl31-rk3399.bin to compatible with other platform BL31 env) - PMUM0 for rk3399m0.bin If the builds are not exporting BL31, PMUM0 env, the fit_spl_atf.sh will notify with warning about which document to refer for more information like this: WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional Please read Building section in doc/README.rockchip WARNING: PMUM0 file rk3399m0.bin NOT found, resulting binary is non-functional Please read Building section in doc/README.rockchip Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26rockchip: rk3399: Get bl31.elf via BL31Jagan Teki
Right now rockchip platform need to copy bl31.elf into u-boot source directory to make use of building u-boot.itb. So, add environment variable BL31 like Allwinner SoC so-that the bl31.elf would available via BL31. If the builds are not exporting BL31 env, the make_fit_atf.py explicitly create dummy bl31.elf in u-boot root directory to satisfy travis builds and it will show the warning on console as WARNING: BL31 file bl31.elf NOT found, resulting binary is non-functional WARNING: Please read Building section in doc/README.rockchip Note, that the dummy bl31 files were created during not exporting BL31 case would be removed via clean target in Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-26travis.yml: Add pyelftools install entryJagan Teki
Currently rockchip platform is using explicit 'make u-boot.itb' for building u-boot.itb but if we enable CONFIG_BUILD_TARGET as 'u-boot.itb' then the resulting u-boot.itb directly will create by make. But, that indeed make travis build fail since it require python-pyelftools host package. So add pyelftools install entry as 'pip install pyelftools', this would create pyelftools on travis host which are required to build rk3399 itb. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26Makefile: clean bl31_*.binJagan Teki
Rockchip platform has its python script that would generate various bl31_*bin for creating u-boot.itb file by taking bl31.elf as input. These bl31_*.bin files are generated in u-boot root directory and have no rule to clean it up. so add support for it by adding in command entry of clean target in Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26Makefile: clean image.mapJagan Teki
binman tools for creating single image build will create image.map at the end, which has information about binman image node details. current u-boot, is unable to clean this image.map so add a command entry in clean target in Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26doc: rockchip: Add note for Pine64 Rock64 boardMatwey V. Kornilov
Add build notes for Pine64 Rock64 board. Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26rockchip: rk3328: add rock64-rk3328_defconfigMatwey V. Kornilov
The ROCK64 is a credit card size SBC based on Rockchip RK3328 Quad-Core ARM Cortex A53. This series allow building u-boot SPL and u-boot.itb for Rock64 board. The proprietary TPL is stil required for deploy: ./tools/mkimage -n rk3328 -T rksd \ -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.16.bin idbloader.img cat ./spl/u-boot-spl.bin >> idbloader.img dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26rockchip: dts: rk3328: add rk3328-rock64.dtsMatwey V. Kornilov
rk3328-rock64.dts has been taken from Linux kernel commit cff6d1d6f88b ("arm64: dts: rockchip: enable HS200 for eMMC on rock64") with minor modifications (drop nodes not known by rk3328.dtsi). Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26rockchip: Kconfig: enable SPL support for rk3328Kever Yang
Enable SPL support and some related option in Kconfig. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from https://github.com/rockchip-linux/u-boot/commit/430b01462bf3f24aaf7920ae2587a6943c39ab5d with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
2019-06-26rockchip: rk3328: add SPL supportKever Yang
Add SPL support for rk3328, default with of-platdata enabled. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from https://github.com/rockchip-linux/u-boot/commit/cb2b7a1bc75ebb116b1eb9b0ae0223e84d86fc4b with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26rockchip: rk3328: add SPL board file supportKever Yang
rk3328 SPL is locate at dram, so do not have strict size limit, suppose to enable storage media controller driver, load ATF and U-Boot, then boot into ATF. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from https://github.com/rockchip-linux/u-boot/commit/4ebe3968b683190cb8e5741aa7227b4fa7497874 with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-22Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- boot failure fix for Intel edison - tangier wdt conversion to driver model
2019-06-22watchdog: tangier: Convert to use WDT classAndy Shevchenko
Convert legacy driver to use watchdog class. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-06-22watchdog: tangier: Replace unused constant with a commentAndy Shevchenko
The default timeout value had been left in order to leave some traces about default setup of watchdog done by firmware. For better understanding and compiler burden, replace it with a comment. Suggested-by: Stefan Roese <sr@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-06-22x86: Revert "Don't set up MTRRs in SPL"Andy Shevchenko
This breaks Intel Edison to work. It gets laggish and unable to boot kernel. Reverts commit 665cb18ea64aabbeb03d27a4c92ddec1baccb87a for now till better solution will be proposed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bin Meng <bmeng.cn@gmail.com>
2019-06-21Merge tag 'efi-2019-07-rc5-3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.07-rc5 (3) This pull request provides error fixes for the graphical output protocol, the text output protocol, and the extended text input protocol. Setting the boot device for the bootefi command is now not only supported by the 'load' command but also for the file system specific commands like 'fatload'.
2019-06-21Merge branch '2019-06-21-master-imports'Tom Rini
- Assorted small fixes - Bugfix RSA handling code to reject images with unknown padding. - Some boards disabled unused features to turn off DM warnings.
2019-06-21configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-21arm: am335x-pdu001: Remove watchdog supportFelix Brack
This board does not require watchdog support. Signed-off-by: Felix Brack <fb@ltec.ch>
2019-06-21lib: Makefile: build fdtdec_common.c when OF_LIBFDT selectedPeng Fan
When build SPL_OF_PLATDATA on i.MX6, meet issue the fdtdec_get_int not defined, however fdtdec.c will use fdtdec_get_int, so let's compile fdtdec_common.c when OF_LIBFDT selected. Since there is also SPL_OF_LIBFDT, so need to use CONFIG_$(SPL_TPL_)OF_LIBFDT. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-06-21pci: Avoid assigning PCI resources that are below 0x1000Bin Meng
commit b7598a43f2b4 ("[PATCH] Avoid assigning PCI resources from zero address") only moved the bus lower address to 0x1000 if the given bus start address is zero. The comment said 0x1000 is a reasonable starting value, hence we'd better apply the same adjustment when the given bus start address is below 0x1000. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-06-21config_distro_bootcmd: Init IDE devicesJoshua Watt
IDE devices are no longer automatically probed by u-boot, so it should be done by the distro boot command before attempting to boot from IDE (just like scsi and nvme) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
2019-06-21arm64: zynqmp: Cover ultra96 dts file by MAINTAINERS fragmentMichal Simek
Avnet Ultra96 dts file should be also cover by MAINTAINERS fragment. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-21travis.yml: Add buildman support for NXP's LS1028 & LX2160Prabhakar Kushwaha
NXP's LS1028 and LX2160 platform build support added via buildman in travis.yml. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-21disk: part: Don't skip partition initRobert Hancock
blk_get_device_by_str was skipping part_init when hw partition 0 was selected because it is the default. However, this caused issues when switching to a non-zero partition and then back to partition zero, as stale data from the wrong partition was returned. Remove this optimization and call part_init regardless of the selected partition. Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
2019-06-21am335x, guardian: update the maintainer listMoses Christopher
Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
2019-06-21vexpress64: fix a typo of SPDX-License-IdentifierMasahiro Yamada
Misspelling of SPDX-License-Identifier is rather fatal than other general typos, so must be fixed. This file spells SPDX-Licence-Identifier. ^ I also moved it to the very top of the file with // comment style. Detected by grepping the source tree: $ git grep --not -e SPDX-License-Identifier --and -e SPDX- board/armltd/vexpress64/pcie.c: * SPDX-Licence-Identifier: GPL-2.0+ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2019-06-21board: Arcturus: DM: Disable drivers without DM support.Oleksandr Zhadan
Extra "not DM" controllers support is disabled. u-boot BSP still good enough to upgrade and run images. Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com> Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
2019-06-21cmd/led.c: fix typos in online helpAnatolij Gustschin
Remove square brackets around label in state command description. Fixes: ea41b15617fa ("cmd/led: check subcommand "list" instead "l"") Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-06-21rsa: reject images with unknown paddingPatrick Doyle
Previously we would store NULL in info->padding and jump to an illegal instruction if an unknown value for "padding" was specified in the device tree. Signed-off-by: Patrick Doyle <pdoyle@irobot.com>
2019-06-20Merge branch '2019-06-20-master-imports'Tom Rini
- Assorted minor fixes
2019-06-20efi_loader: fix typo in efi_variable.cHeinrich Schuchardt
%s/efi_efi_/efi_/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: consistent error handling in efidebug.cHeinrich Schuchardt
If a variable cannot be set, always show an information message. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: consistent types in efidebug.cHeinrich Schuchardt
efi_status_t and int are of different size. Use separate variables for return codes of different type. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20fs: do_load: pass device path for efi payloadMian Yousaf Kaukab
fatload command can be used to load the EFI payload since EFI system partition is always a FAT partition. Call into EFI code from do_load() to set the device path from which the last binary was loaded. An EFI application like grub2 can’t find its configuration file without the device path set. Since device path is now set in do_load() there is no need to set it in do_load_wrapper() for the load command. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: Delete() return EFI_WARN_DELETE_FAILUREHeinrich Schuchardt
If EFI_FILE_PROTOCOL.Delete() fails, always close the handle and return EFI_WARN_DELETE_FAILURE. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: ListPackageLists() return EFI_NOT_FOUNDHeinrich Schuchardt
If no matching package list is found in ListPackageLists(), return EFI_NOT_FOUND. If we do not support a package type, we will not find a matching package list. Remove the unreachable EFI_PRINTF() statements. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: console incorrectly advertised left logo keyHeinrich Schuchardt
Avoid to signal that the left logo key is pressed, when it is not. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: alternative scan codes for F5, END, HOMEHeinrich Schuchardt
Depending on the key board alternative scan codes are used for F5, END, and HOME. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: GOP: provide accurate mode informationHeinrich Schuchardt
For 5:6:5 modes provide correct frame buffer information. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: SetMode() must blank screenHeinrich Schuchardt
EFI_GRAPHICS_OUTPUT_PROTOCOL.SetMode() must blank the screen. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: system table setupHeinrich Schuchardt
When setting up the system table avoid superfluous void * conversions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL definitionHeinrich Schuchardt
EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.Reset() is a function and not a void * pointer. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: QueryMode() must allocate bufferHeinrich Schuchardt
EFI_GRAPHICS_OUTPUT_PROTOCOL.QueryMode() must allocate a buffer for the mode information structure. Adjust the unit test to free the buffer. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: SetMode() parameters checkHeinrich Schuchardt
If EFI_GRAPHICS_OUTPUT_PROTOCOL.SetMode() is called with an invalid mode, return EFI_UNSUPPORTED. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: QueryMode() check parametersHeinrich Schuchardt
Check the parameters of EFI_GRAPHICS_OUTPUT_PROTOCOL.QueryMode(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: Blt() with incorrect BltOperationHeinrich Schuchardt
If EFI_GRAPHICS_OUTPUT_PROTOCOL.Blt() is called with an invalid value of BltOperation return EFI_INVALID_PARAMETER. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20Fix watchdog timeout setup for mt7623Shannon Barber
Signed-off-by: Shannon Barber <sbarber@dataspeedinc.com>
2019-06-20fw_env: Add missing write failure checkAlex Kiernan
If flash_write fails, whilst we propagate this up to our caller, we need to avoid swapping in the new file (if we're on a filesystem) in this case. Fixes: dbc34323796b ("tools: env: Implement atomic replace for filesystem") Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2019-06-20doc: Remove duplicated documentation directoryBreno Matheus Lima
Commit ad7061ed742e ("doc: Move device tree bindings documentation to doc/device-tree-bindings") moved all device tree binding documentation to doc/device-tree-bindings directory. The current U-Boot project still have two documentation directories: - doc/ - Documentation/ Move all documentation and sphinx files to doc directory so all content can be in a common place. Signed-off-by: Breno Lima <breno.lima@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-24 00:32:10 +0000