summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-13microblaze: bootm: Fix compiler warningBin Meng
Fix build warning in arch/microblaze/lib/bootm.c with gcc 7.3.0: warning: this 'if' clause does not guard... [-Wmisleading-indentation] Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2018-02-13arm: omap2: Fix compiler warningBin Meng
Fix build warning in arch/arm/mach-omap2/emif-common.c and arch/arm/mach-omap2/omap4/emif.c with gcc 7.3.0: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier] Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-13video: ivybridge_igd: Fix compiler warningBin Meng
Fix build warning in drivers/video/ivybridge_igd.c with gcc 7.3.0: warning: 'ivb_pm_gt2' defined but not used [-Wunused-const-variable=] Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-13tftp: update: Include missing cfi_flash.h headerMarek Vasut
Add the missing header, otherwise CONFIG_SYS_MAX_FLASH_BANKS may be undeclared. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-02-13cmd: fitupd: Convert CONFIG_UPDATE_TFTP and co.Marek Vasut
Convert the CONFIG_UPDATE_TFTP and related symbols to Kconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-02-13cmd: fitupd: Convert CONFIG_CMD_FITUPDMarek Vasut
Convert the CONFIG_CMD_FITUPD symbol to Kconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-02-13Merge git://git.denx.de/u-boot-rockchipTom Rini
2018-02-13spl: fit: move fdt_record_loadable out of ARCH_FIXUP_FDT_MEMORY guardPhilipp Tomsich
The fdt_record_loadable()-function was wedged between other functions that were guarded by ARCH_FIXUP_FDT_MEMORY. This could lead to linker errors on some configurations. With this change, fdt_record_loadable() is moved out of the ARCH_FIXUP_FDT_MEMORY guard (plus I tried to retain alphabetical ordering for functions by placing it appropriately). References: 9f45aeb ("spl: fit: implement fdt_record_loadable") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reported-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com>
2018-02-13rockchip: gpio: remove dead codeHeinrich Schuchardt
In the following statements if (a) return a; if (a) return c; the second return can never be executed. Identified by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-02-12Prepare v2018.03-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-12Fix misaligned buffer in env_fat_saveAlex Kiernan
When saving the environment on a platform which has DMA alignment larger than the natural alignment, env_fat_save triggers a debug message in file_fat_write: Saving Environment to FAT... writing uboot.env FAT: Misaligned buffer address (9df1c8e0) OK Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-02-12Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2018-02-11configs: Migrate CONFIG_SYS_TEXT_BASETom Rini
On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-10configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-10Merge tag 'signed-efi-v2018.03' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi in 2018.03 - 2018-02-10 This time we have a few important bug fixes. Most noticable are: - Fix OpenBSD loader with CONFIG_BLK=n - Fix builds on various circumstances - Add missing stubs so callers don't call NULL - Bump UEFI revision to 2.7
2018-02-10efi_loader: correct efi_disk_registerHeinrich Schuchardt
efi_disk_register should return as status code (efi_status_t). Disks with zero blocks should be reported as 'not ready' without throwing an error. This patch solves a problem running OpenBSD on system configured with CONFIG_BLK=n (e.g. i.MX6). Reported-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10efi_loader: add missing runtime services stubsHeinrich Schuchardt
Add stubs for UpdateCapsule, QueryCapsuleCapabilities, and QueryVariableInfo. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10efi_loader: split README.efi into two separate documentsHeinrich Schuchardt
README.efi describes two different concepts: * U-Boot exposing the UEFI API * U-Boot running on top of UEFI. This patch splits the document in two. Religious references are removed. The separation of the concepts makes sense before detailing the internals of U-Boot exposing the UEFI API in a future patch. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10efi_driver: return type of efi_driver_init()Heinrich Schuchardt
Change the return type of efi_driver_init() to efi_status_t. efi_driver_init() calls efi_add_driver() which returns an efi_status_t value. efi_driver_init() should not subject this value to a conversion to int losing high bits on 64bit systems. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10efi_loader: do not use 2.0.5 as UEFI revision numberHeinrich Schuchardt
Currently the UEFI revision number in the system table header is set to 2.0.5. This version number does not refer to any existing version of the UEFI standard. Set the revision number to 2.7. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10efi_loader: create stub for CreateEventExHeinrich Schuchardt
Currently we set the function pointer for the CreateEventEx boot service to NULL. When called this would lead to an immediate failure. A function stub is provided which handles the case that the boot service is called without an event group and returns EFI_UNSUPPORTED otherwise. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10efi_selftest: use correct compiler flags for miniappsHeinrich Schuchardt
For EFI binaries we need special CFLAGS. They were specified for an object file that since has been replaced. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10efi_loader: fix the online help for bootefi bootmgrHeinrich Schuchardt
The bootefi command is missing in the online help for bootefi bootmgr. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10efi_loader: fix building crt0 on armHeinrich Schuchardt
Before the patch an undefined constant EFI_SUBSYSTEM was used in the crt0 code. The current version of binutils does not swallow the error. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=888403 The necessary constant IMAGE_SUBSYSTEM_EFI_APPLICATION is already defined in pe.h. So let's factor out asm-generic/pe.h for the image subsystem constants and use it in our assembler code. IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER does not exist in the specification let's use IMAGE_SUBSYSTEM_EFI_ROM instead. The include pe.h is only used in code maintained by Alex so let him be the maintainer here too. Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-09drivers/ddr/fsl: Dual-license DDR driverYork Sun
To make this driver easier to be reused, dual-license DDR driver. Signed-off-by: York Sun <york.sun@nxp.com> CC: Simon Glass <sjg@chromium.org> CC: Tom Rini <trini@konsulko.com> CC: Heinrich Schuchardt <xypron.glpk@gmx.de> CC: Thomas Schaefer <thomas.schaefer@kontron.com> CC: Masahiro Yamada <yamada.masahiro@socionext.com> CC: Robert P. J. Day <rpjday@crashcourse.ca> CC: Alexander Merkle <alexander.merkle@lauterbach.com> CC: Joakim Tjernlund <joakim.tjernlund@transmode.se> CC: Curt Brune <curt@cumulusnetworks.com> CC: Valentin Longchamp <valentin.longchamp@keymile.com> CC: Wolfgang Denk <wd@denx.de> CC: Anatolij Gustschin <agust@denx.de> CC: Ira W. Snyder <iws@ovro.caltech.edu> CC: Marek Vasut <marek.vasut@gmail.com> CC: Kyle Moffett <Kyle.D.Moffett@boeing.com> CC: Sebastien Carlier <sebastien.carlier@gmail.com> CC: Stefan Roese <sr@denx.de> CC: Peter Tyser <ptyser@xes-inc.com> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Peter Tyser <ptyser@xes-inc.com> CC: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2018-02-09PowerPC: phy: enable all phylib drivers when use phylib and tsec enetZhao Qiang
config_phylib_all_drivers.h should be included when CONFIG_PHYLIB and CONFIG_TSEC_ENET are defined. Fixes: 3146f0c017 ("Move PHYLIB to Kconfig") Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-02-09crypto/fsl: instantiate all rng state handlesLukas Auer
Extend the instantiate_rng() function and the corresponding CAAM job descriptor to instantiate all RNG state handles. This moves the RNG instantiation code in line with the CAAM kernel driver. Previously, only the first state handle was instantiated. The second one was instantiated by the CAAM kernel driver. This works if the kernel runs in secure mode, but fails in non-secure mode since the kernel driver uses DEC0 directly instead of over the job ring interface. Instantiating all RNG state handles in u-boot removes the need for using DEC0 in the kernel driver, making it possible to use the CAAM in non-secure mode. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: York Sun <york.sun@nxp.com>
2018-02-09armv8: ls1012ardb: Add distro secure boot supportVinitha Pillai-B57223
Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Enable fall back option to qspi boot in case of secure boot. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-02-09armv8: Remove dependency of SERDES for LSCH2 and LSCH3Sriram Dash
Remove dependency of SYS_HAS_SERDES for Layerscape Chasis 2 and Layerscape Chasis 3. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-02-09armv8: ls1088a: qspi: Enable XIP mode above 16 MB addressesRajat Srivastava
Currently in LS1088A, XIP mode in QSPI works up to 16 MB addresses. This patch enables QSPI support in XIP mode for addresses above 16 MB as well. Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-02-09ARMv8: ls1046a: Enable PCIe and E1000 in lpuart defconfigHou Zhiqiang
Enable PCIe and E1000 in ls1046aqds lpuart defconfig. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-02-08Move most CONFIG_HAVE_BLOCK_DEVICE to KconfigAdam Ford
config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to Kconfig allows us to drastically shrink the logic in config_fallbacks.h Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-08block: Migrate SystemACE chip to KconfigTom Rini
Migrate the base and sub-options to Kconfig. Note that we only enable this in the base sandbox config now. Cc: Alexey Brodkin <alexey.brodkin@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tom Rini <trini@konsulko.com> --- Is this driver still used anywhere? It's fishy that it's only enabled in sandbox anymore.
2018-02-08Convert LIB_UUID to KconfigAdam Ford
config_fallback.h has some logic that checks a variety of options and selects LIB_UUID if it hasn't already been selected. This will all LIB_UUID in Kconfig and select this option for the list of options to allow us to remove the logic from fallbacks Signed-off-by: Adam Ford <aford173@gmail.com>
2018-02-08Convert CONFIG LIB_HW_RAND to KconfigAdam Ford
config_fallbacks.h had some logic to automatically select LIB_RAND if RANDOM_UUID or CMD_UUID were set if LIB_HW_RAND wasn't already selected. By migrating LIB_HW_RAND to Kconfig, we can remove this check from config_fallbacks.h and put it into Kconfig Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> [trini: Turn into a choice, add NET_RANDOM_ETHADDR] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-08Convert CONFIG_APBH_DMA et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_APBH_DMA CONFIG_APBH_DMA_BURST CONFIG_APBH_DMA_BURST8 Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Stefan Agner <stefan.agner@toradex.com> [trini: Add in MMC as well] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-08Kconfig: Select networking commands only when NET is enabledMichal Simek
There is no reason to unconditially select network commands as distro defaults without networking enable. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-02-08Kconfig: net: phylib: Phylib should depends on NETMichal Simek
There is no value to enable phylib without networking support. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-02-08omap4: sdp4430: Enable CONFIG_NET for this platformMichal Simek
Distro default configuration contains also dhcp and pxe setting which can't working without enabling CONFIG_NET. EFI is not required that's why it is not enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-02-08configs: stm32: Enable CONFIG_ENV_VARS_UBOOT_CONFIGPatrice Chotard
Enable CONFIG_ENV_VARS_UBOOT_CONFIG for all STM32 boards It allows to retrieve the SoC name into the "soc" environment variable. Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-02-08Convert CONFIG_NAND_MXS to KconfigStefan Agner
This converts CONFIG_NAND_MXS to Kconfig. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-08spl: use ARCH_MX23/28 to specify SPL_LDSCRIPTStefan Agner
Simplify SPL_LDSCRIPT config by using the new arch Kconfig configurations ARCH_MX23 and ARCH_MX28. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-08arm: imx: mx28: Move MX28 selection to KconfigStefan Agner
The motivation for moving MX28 selection to Kconfig is to be able to better handle NAND MXS selection through Kconfig. This selection method also aligns with the way other i.MX SoCs are selected in U-Boot. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-08arm: imx: mx23: Move MX23 selection to KconfigStefan Agner
The motivation for moving MX23 selection to Kconfig is to be able to better handle NAND MXS selection through Kconfig. This selection method also aligns with the way other i.MX SoCs are selected in U-Boot. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-08Convert CONFIG_MXC_GPIO to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_MXC_GPIO Signed-off-by: Adam Ford <aford173@gmail.com>
2018-02-08configs: imx6q_logic: Move CONFIG_PHY_SMSC to defconfigAdam Ford
Since CONFIG_PHY_SMSC was already in Kconfig, move this from header file to defconfig Signed-off-by: Adam Ford <aford173@gmail.com>
2018-02-08configs: imx6q_logic: Move CONFIG_MXC_UART to KconfigAdam Ford
Since CONFIG_MXC_UART is already in Kconfig, move this from the header to imx6q_logic_defconfig Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-02-07doc: watchdog: Remove Blackfin related documentation entryLukasz Majewski
This commit cleans up the README.watchdog by removing the reminescent of ADI's Blackfin architecture removed some time ago. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-02-07ARM: omap3: evm: Remove CONFIG_SYS_NS16550_REG_SIZE undefineDerald D. Woods
This commit removes an attempt to workaround a previous compilation warning that is is now fixed in "include/configs/ti_omap3_common.h". Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-07ARM: omap3: ti_omap3_common: Fix CONFIG_SYS_NS16550_REG_SIZE compiler warningDerald D. Woods
This commit fixes the following compiler warnings when DM_SERIAL is enabled. ---8<------------------------------------------------------------------- ... CC spl/board/ti/evm/evm.o In file included from /solution/scm/u-boot-master/board/ti/evm/evm.c:16:0: /solution/scm/u-boot-master/include/ns16550.h:31:0: warning: "CONFIG_SYS_NS16550_REG_SIZE" redefined #define CONFIG_SYS_NS16550_REG_SIZE (-1) In file included from /solution/scm/u-boot-master/include/configs/omap3_evm.h:22:0, from include/config.h:5, from /solution/scm/u-boot-master/include/common.h:21, from /solution/scm/u-boot-master/board/ti/evm/evm.c:14: /solution/scm/u-boot-master/include/configs/ti_omap3_common.h:33:0: note: this is the location of the previous definition # define CONFIG_SYS_NS16550_REG_SIZE (-4) LD spl/board/ti/evm/built-in.o ... CC spl/drivers/serial/ns16550.o In file included from /solution/scm/u-boot-master/drivers/serial/ns16550.c:11:0: /solution/scm/u-boot-master/include/ns16550.h:31:0: warning: "CONFIG_SYS_NS16550_REG_SIZE" redefined #define CONFIG_SYS_NS16550_REG_SIZE (-1) In file included from /solution/scm/u-boot-master/include/configs/omap3_evm.h:22:0, from include/config.h:5, from /solution/scm/u-boot-master/include/common.h:21, from /solution/scm/u-boot-master/drivers/serial/ns16550.c:7: /solution/scm/u-boot-master/include/configs/ti_omap3_common.h:33:0: note: this is the location of the previous definition # define CONFIG_SYS_NS16550_REG_SIZE (-4) LD spl/drivers/serial/built-in.o ... ---8<------------------------------------------------------------------- Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit (git 2.34.1) at 2024-12-28 01:12:05 +0000