summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-19arm: stm32: add new architecture for STM32MP familyPatrick Delaunay
- add new arch stm32mp for STM32 MPU/Soc based on Cortex A - support for stm32mp157 SOC - SPL is used as first boot stage loader - using driver model for all the drivers, even in SPL - all security feature are deactivated (ETZC and TZC) - reused STM32 MCU drivers when it is possible Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19stm32mp: stm32f7_i2c: use calloc instead of kmallocPatrick Delaunay
Kmalloc is using memalign allocation function. It is not necessary to align this structure so to save bytes, we move to calloc. And kmalloc function can't be used in SPL early stage (in board_init_f()) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19gpio: stm32f7_gpio: handle node ngpiosPatrick Delaunay
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19dm: gpio: Convert stm32f7 driver to livetreePatrick Delaunay
Update the GPIO driver to support a live device tree. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19arm: armv7: solve issue for timer_rate_hz in arch timerPatrick Delaunay
The current value timer_rate_hz causes a problem with function timer_get_us() from lib time and then an issue with readx_poll_timeout() function. With corrected value for tbclk() = timer_rate_hz = CONFIG_SYS_HZ_CLOCK the weak functions in lib timer can be used: - get_timer() - __udelay() So the specific function in this file are removed. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19spl: add SPL_RESET_SUPPORTPatrick Delaunay
Add option to include RESET driver and uclass in SPL. That can be useful to handle IP reset with same driver in U-Boot and in SPL. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19tools/mkimage: add support for STM32 image formatPatrick Delaunay
STM32MP157 bootrom needs a specific header for first boot stage. This patch adds support of this header in mkimage. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19tools: env: Implement atomic replace for filesystemAlex Kiernan
If the U-Boot environment is stored in a regular file and redundant operation isn't set, then write to a temporary file and perform an atomic rename. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-03-19tools: env: Refactor write path of flash_io()Alex Kiernan
Extract write path of flash_io() into a separate function. This patch should be a functional no-op. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-03-19tools: env: Fix CamelCasing style violationAlex Kiernan
Replace HaveRedundEnv with have_redund_env to fix style violation. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-03-19tools: env: Pass through indentAlex Kiernan
Pass tools/env/fw_env.c through indent to correct style violations. This commit consists of only one non-whitespace change: tools/env/fw_env.c:549: error: do not use assignment in if condition Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-03-19SPL: Add signature verification when loading imageJun Nie
U-boot proper signature is not verified by SPL on most platforms even config SPL_FIT_SIGNATURE is enabled. Only fsl-layerscape platform support secure boot in platform specific code. So verified boot cannot be achieved if u-boot proper is loaded by SPL. This patch add signature verification to u-boot proper images when loading FIT image in SPL. It is tested on Allwinner bananapi zero board with H2+ SoC. Signed-off-by: Jun Nie <jun.nie@linaro.org>
2018-03-19Merge git://git.denx.de/u-boot-videoTom Rini
2018-03-19board: Add display to STM32F746 SoC discovery boardyannick fertre
Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19stm32f7: board: add splash screenyannick fertre
Support several pixel format (8bits, 16bits, 24bits & 32bits). Add new file st_logo_data.h which contains logo stmicroelectronics_uboot_logo_8bit_rle.bmp. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19arm: dts: stm32: add display for STM32F746 disco boardyannick fertre
Enable the display controller, panel & backlight. Set panel display timings & set the RGB data bus. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19arm: dts: stm32: add ltdc for STM32F746Philippe CORNU
Add display controller node in device-tree. Signed-off-by: yannick fertre <yannick.fertre@st.com> [agust: rebased on master] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2018-03-19video: stm32: stm32_ltdc: set the blending factoryannick fertre
Set the blending factor regarding the pixel format Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: missing set of line interrupt positionyannick fertre
Set LIPCR (line interrupt position conf) register with line length. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: set rate of the pixel clockyannick fertre
pxclk is useless to set pixel clock. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: update file header & footeryannick fertre
Modified copyright & driver name. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: stm32: stm32_ltdc: add resetyannick fertre
Add reset of LTDC display controller. Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19video: exynos: remove redundant assignmentsHeinrich Schuchardt
No need to initialize variables if the next usage is an assignment. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19video, da8xx-fb: fix time out in wait_for_event()Heinrich Schuchardt
If an event does not occur the current coding stays in an endless loop. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19video: stb_truetype: simplify expressionHeinrich Schuchardt
Eliminate (x2 - x2) which is always zero. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19video: cfb_console: simplify logical constraintHeinrich Schuchardt
(A || !A && B) == (A || B) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-16common: move init_helpers.h prototypes in init.hPatrick Delaunay
Merge init_helpers.h in the new file init.h with only prototypes for init_cache_f_r used in common/board_f.c Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-16common: move board_info.c prototypes in init.hPatrick Delaunay
Move function prototype for common/init/board_init.c from common.h to init.h Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-16common: move board_r.c prototypes in init.hPatrick Delaunay
Move function prototypes used in common/board_r.c from common.h to init.h Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-16common: move board_init.c prototypes in init.hPatrick Delaunay
Move function prototypes for common/init/board_init.c from common.h to init.h Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-16common: move board_f.c prototypes in init.hPatrick Delaunay
Move prototypes for function used in common/board_f.c from common.h to init.h Remove weak for arch_reserve_stacks in prototype (checkpatch issue) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-16ppc: Remove orphan xilinx_irq.h fileMichal Simek
This file is completely unused and it should be removed as the part of ppc405/ppc440 xilinx platform removal. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-16MAINTAINERS: TI SYSTEM SECURITY: remove invalid fileHeinrich Schuchardt
Remove a link to a non-existent file. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Andrew F. Davis <afd@ti.com>
2018-03-16MAINTAINERS: ARM TI: remove invalid pathsHeinrich Schuchardt
Remove non-existing paths. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-16MAINTAINERS: ARM SAMSUNG: remove invalid pathsHeinrich Schuchardt
Remove non-existing directories. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2018-03-16MAINTAINERS: FLATTENED DEVICE TREE: correct maintained pathHeinrich Schuchardt
Change due to commit b08c8c487083 ("libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-16MAINTAINERS: ARM HISILICON: correct maintained pathHeinrich Schuchardt
Fix an incorrect path. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-16MAINTAINERS: ARM FREESCALE IMX: remove invalid pathHeinrich Schuchardt
arch/arm/cpu/armv7/mx*/ does not relate to any existing directory. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-03-16post: remove reference to power functionsPatrick Delaunay
The 2 functions board_power_mode and board_poweroff are no more existing in U-Boot code (check with grep) This patch updates the documentation and removes the unnecessary prototypes. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-16common: remove unused prototypesPatrick Delaunay
Remove the prototypes for 4 functions no more existing in U-Boot code (checked by grep): - checkflash - checkdram - mdm_init - setup_board_extra Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-16common: add a prototype for mach_cpu_init()Patrick Delaunay
Add a new file init.h with the prototype for arch_cpu_init Add a prototype for mach_cpu_init() to avoid a warning: no previous prototype for ‘mach_cpu_init’ It is a first step to move all the functions prototype used during U-Boot initialization (board_f.c / board_r.c) from common.h to init.h Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-16Convert all of CONFIG_CONS_INDEX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-16dra7xx: Always enable UART1 and UART3 in early_padconfTom Rini
It is safe to always setup the pinmux for UART1 and UART3 to be used in early_padconf and then if these pins are needed later on, they will be re-muxed. This allows us to drop the usage of CONFIG_CONS_INDEX here. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-03-16dm: MIGRATION: Add migration plan for DM_SPI & DM_SPI_FLASHJagan Teki
Due to adding various new functionalities with SPI and SPI-FLASH subsystems which are rounding in Mailing list for year these long term supporting spi driver which never seen any update with driver-model conversion. So added migration plan for DM_SPI and DM_SPI_FLASH with deadline v2018.09 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-03-16defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfigMadan Srinivas
Adds a dedicated defconfig to build TI K2L secure devices and updates MAINTAINERS. k2l_hs_evm_defconfig is created from the k2l_evm_defconfig and removes support for SPL, as SPL is not supported on K2 HS devices. Corrects SYS_TEXT_BASE for HS devices. Also adds TI_SECURE_DEVICE and FIT_IMAGE_POST_PROCESS to include support for secure image creation and authentication Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Andrew F. Davis <afd@ti.com>
2018-03-16configs: k2l: Updates u-boot env to install secure boot monitorMadan Srinivas
This patch updates the default u-boot env for K2L HS devices to install the secure boot monitor and load the fitImage during boot. Signed-off-by: Madan Srinivas <madans@ti.com> Acked-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-03-16watchdog: omap_wdt: improve watchdog reset pathRuslan Bilovol
Remove busy looping during watchdog reset. Each polling of W_PEND_WTGR bit ("finish posted write") after watchdog reset takes 120-140us on BeagleBone Black board. Current U-Boot code has watchdog resets in random places and often there is situation when watchdog is reset few times in a row in nested functions. This adds extra delays and slows the whole system. Instead of polling W_PEND_WTGR bit, we skip watchdog reset if the bit is set. Anyway, watchdog is in the middle of reset *right now*, so we can just return. This noticeably increases performance of the system. Below are some measurements on BBB: - DFU upload over USB 15% faster - fastboot image upload 3x times faster - USB ep0 transfers with 4k packets 20% faster Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Tested-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-03-16board: am335x: Set serial# variableSam Protsenko
serial# variable is needed to show the device correctly in "fastboot devices" output. It's useful when we have several devices (in fastboot mode) connected to single host and want to choose which one to flash. We can't use omap_die_id_serial() for this, because AM335x lacks DIE_ID, as can be seen from AM335x TRM. Let's do next: - reuse board_serial variable (obtained from EEPROM in set_board_info_env() function) to set serial# - if board_serial is "unknown", reuse ethaddr variable to set serial# Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-03-16clk: at91: clk-system: add set/get_rate operationsWenyou Yang
To support set/get the clock rate, add set/get_rate operations. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
2018-03-16clk: at91: add PLLADIV driverWenyou Yang
As said in the SAMA5D2 datasheet, the PLLA clock must be divided by 2 by writing the PLLADIV2 bit in PMC_MCKR, if the ratio between PCK and MCK is 3 (MDIV = 3). This is the purpose of the driver. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
generated by cgit (git 2.34.1) at 2025-01-25 22:45:34 +0000