summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-28board: sama5d2_xplained: add pda detect call at init timeEugen Hristev
Call the PDA detection mechanism at boot time so we can have the pda environment variable ready for use. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28board: atmel: add support for pda detectionEugen Hristev
This adds the support for PDA detection as common code for Atmel boards. Using the one wire interface over GPIO , an EEPROM memory is read and compared to preprogrammed values for PDA screens TM4300, TM7000 and TM7000B. Once the PDA is detected, an environment variable is set accordingly. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28configs: sama5d4_xplained: add onewire and eeprom driversEugen Hristev
SAMA5D4 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol. Enabling one wire and eeprom drivers for this memory. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28configs: sama5d2_ptc_ek: add onewire and eeprom driversEugen Hristev
SAMA5D2 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol. Enabling one wire and eeprom drivers for this memory. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28configs: sama5d27_som1_ek: add onewire and eeprom driversEugen Hristev
SAMA5D2 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol. Enabling one wire and eeprom drivers for this memory. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28configs: sama5d3_xplained: add onewire and eeprom driversEugen Hristev
SAMA5D3 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol. Enabling one wire and eeprom drivers for this memory. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28configs: sama5d2_xplained: add onewire and eeprom driversEugen Hristev
SAMA5D2 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol. Enabling one wire and eeprom drivers for this memory. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28configs: sandbox: add onewire w1 and sandbox eepromEugen Hristev
To be able to test Dallas onewire protocol and one wire eeproms driver and subsystem, add in sandbox defconfig the drivers' config. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28sandbox: DTS: w1: add node for one wire interface on GPIOEugen Hristev
Add a node for the one wire uclass and one wire gpio driver in sandbox. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28pinctrl: sandbox: add gpio onewire w1 groupEugen Hristev
Add onewire "w1" groups and pin function for onewire GPIOs in sandbox. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28w1: add command for onewire protocolEugen Hristev
Add basic command for bus information and read for onewire bus using Dallas 1-Wire protocol. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28dt-bindings: w1-eeprom: eep_sandbox: create bindingsEugen Hristev
Bindings for sandbox onewire eeprom driver Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28W1-EEPROM: add sandbox driverEugen Hristev
Add a sandbox driver for a one wire EEPROM memory Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28dt-bindings: w1-eeprom: ds24xxx: create bindingsEugen Hristev
Bindings for Maxim's ds24 onewire EEPROM families driver Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28W1-EEPROM: add support for Maxim DS24 eeprom familiesMaxime Ripard
Add a driver that supports Maxim 1 wire EEPROMs families DS24B33 and DS2431. Can be extended for other families as well. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [eugen.hristev@microchip.com: reworked driver] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28w1: identify devices with w1-eeprom uclassEugen Hristev
When a new device is discovered, this may be a w1 eeprom device. Attempt to find the proper node and driver from the w1-eeprom subsystem. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMsMaxime Ripard
We might want to access data stored onto one wire EEPROMs. Create a framework to provide a consistent API. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [eugen.hristev@microchip.com: reworked patch] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28dt-bindings: W1: w1-gpio: added bindings for w1-gpioEugen Hristev
Added bindings specification for bitbanged gpio driver for Dallas one wire protocol Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28w1: Add 1-Wire gpio driverMaxime Ripard
Add a bus driver for bitbanging a 1-Wire bus over a GPIO. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [eugen.hristev@microchip.com: fixed some issues] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28w1: Add 1-Wire uclassMaxime Ripard
We might want to use 1-Wire devices connected on boards such as EEPROMs in U-Boot. Provide a framework to be able to do that. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [eugen.hristev@microchip.com: reworked] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28common: Generic loader for file systemTien Fong Chee
This is file system generic loader which can be used to load the file image from the storage into target such as memory. The consumer driver would then use this loader to program whatever, ie. the FPGA device. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2018-09-28doc: dtbinding: Add file system firmware loader binding documentTien Fong Chee
Add a document to describe file system firmware loader binding information. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-28doc: Add new doc for file system firmware loader driver modelTien Fong Chee
Provide information about - overview of file system firmware loader driver model - describe storage device and partition in device tree source - describe fie system firmware loader API Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-28block: Add a function to find block device descriptorTien Fong Chee
Add a function to find the block device descriptor of the parent device. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> [trini: Move function declaration to avoid warning] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-28cmd: ubifs: Factor out some checking codes into cmd_ubifs_mount()Tien Fong Chee
cmd_ubifs_mount() function would be called directly instead of involving whole command machinery for mounting ubifs in generic firmware loader, so some checking codes need to be factored out into cmd_ubifs_mount() without breaking original functionality design. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-09-28cmd: ubifs: Move ubifs_initialized checking into cmd_ubifs_umount()Tien Fong Chee
cmd_ubifs_umount() function would be called directly instead of involving whole command machinery in generic firmware loader, so checking on ubifs_initialized status need to be done in cmd_ubifs_umount() without breaking original functionality design. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Fix conflicting type error in cmd/ubi.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-28video: Add support for Arm's Mali Display ProcessorsLiviu Dudau
Add support for Arm Mali Display Processors DP500, DP550 and DP650. Only one layer is being used to display the console or boot logo, even if more layers are supported in the hardware. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28patman: Detect missing tools and report themSimon Glass
When tools are needed but not present, at present we just get an error which can be confusing for the user. Try to be helpful by reporting the tool as missing and suggesting a possible remedy. Also update the Run() method to support this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28binman: Support updating all device tree filesSimon Glass
Binman currently supports updating the main device tree with things like the position of each entry. Extend this support to SPL and TPL as well, since they may need (a subset of) this information. Also adjust DTB output files to have a .out extension since this seems clearer than having a .dtb extension with 'out' in the name somwhere. Also add a few missing comments and update the DT setup code to use ReadFile and WriteFile(). Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28binman: Allow control of whether a fake DT is usedSimon Glass
We use a fake device tree in tests most of the time since tests don't normally care about the actual data. For example, for U-Boot proper we use U_BOOT_DTB_DATA which is just a four-character string. This makes testing the image output against an expected value very easy. However in some cases, such as when the test wants to check that the DT output containing particular nodes, we do actually need the real DT. Add support for this, along with a command-line option to select 'test mode'. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28binman: Obtain the list of device trees from the configSimon Glass
We always have a device tree for U-Boot proper. But we may also have one for SPL and TPL. Add a new Entry method to find out what DTs an entry has, and use that list when updating DTs. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28binman: Centralise device-tree updates within binmanSimon Glass
At present we have a few calls to device-tree functions in binman and plan to add more as we add new entry types which need to report their results. It makes sense to put this code in a central place so that we can make sure all device trees are updated. At present we only have U-Boot proper, but plan to add SPL and TPL too. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28binman: Move state logic into the state moduleSimon Glass
Rather than reaching into this module from control, move the code that needs this info into state. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28binman: Move state information into a new moduleSimon Glass
At present the control module has state information in it, since it is the primary user of this. But it is a bit odd to have entries and other modules importing control to obtain this information. It seems better to have a dedicated state module, which control can use as well. Create a new module using code from control and update other modules to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28binman: Add an entry method for getting the default filenameSimon Glass
Various entry implementations provide a way to obtain the default filename for an entry. But at present there is no base-class implementation for this function. Add one so that the API is defined. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28dtoc: Add a way to create an Fdt object from a data blockSimon Glass
Support creating an Fdt object without having to write the data to a file first. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28dtoc: Add methods for adding and updating propertiesSimon Glass
Add a few more functions which allow creating and modifying property values. If only we could do this so easily in the real world. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28dtoc: Support adding new nodesSimon Glass
Add a way to add new nodes and sync them back to the blob. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28dtoc: Fixed endianness in Prop.GetEmpty()Simon Glass
This should be big endian, since that is what device tree uses. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28dtoc: Allow syncing of the device tree back to a fileSimon Glass
At present we require the caller to manually update the device tree using individual calls to libfdt functions. This is not ideal. It would be better if we could make changes using the Python structure and then call a Sync() function to write them back. Add this feature to the Fdt class. Update binman and the tests to match. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28binman: Support building a selection of imagesSimon Glass
Sometimes it is useful to build only a subset of the images provided by the binman configuration. Add a -i option for this. It can be given multiple times to build several images. If the option is not given, all images are built. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28binman: Tidy up the vblock entrySimon Glass
At present if there are two vblock entries an image their contents are written to the same file in the output directory. This prevents checking the contents of each separately. Fix this by adding part of the entry path to the filename, and add some missing comments. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28binman: Add x86 support for starting TPLSimon Glass
Sometimes we want to include TPL for x86 platforms, such as when we want to select between different SPL images (e.g. for Chrome OS verified boot). Add support for this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28binman: Generate an error when text is not providedSimon Glass
When the value of a text entry is not provided an execption is generated talking about a None type. This is confusing. Add a more explanatory error and a test for this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28binman: Allow 'fill' entry to have a size of 0Simon Glass
The check for this should be for None, not 0. Fix it and add a test. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28binman: Move 'special properties' docs to README.entriesSimon Glass
This information should be in the entry it relates to, not in the main README. Move it. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28fdt: Add Python support for adding/removing nodesSimon Glass
Pull this support from these upstream commits: bfbfab0 pylibfdt: Add a means to add and delete notes 9005f41 pylibfdt: Allow delprop() to return errors Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28video: Add support for NXP's TDA19988 HDMI encoderLiviu Dudau
Add support for the NXP TDA19988 HDMI encoder as used on the Juno development board from Arm. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A23/A33/r16 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commits. A23: commit bc3bd041fe766219a44688b182c260064007f0cc Author: Miquel Raynal <miquel.raynal@bootlin.com> Date: Tue Apr 24 17:55:02 2018 +0200 ARM: dts: sun8i: a23/a33: declare NAND pins A33: commit 88fe315d2c0a397ef42d7639addab0e021ae911d Author: Maxime Ripard <maxime.ripard@bootlin.com> Date: Wed Apr 4 11:57:15 2018 +0200 ARM: dts: sun8i: a33: Add the DSI-related nodes r16: commit 9621d0bd1b0d61167e1853ac68cf4869c31bcc96 Author: Miquel Raynal <miquel.raynal@bootlin.com> Date: Tue Apr 24 17:55:03 2018 +0200 ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support Note: - Drop pinctrl from sun8i-r16-nintendo-nes-classic-edition.dts since sun8i-a23-a33.dtsi is added with Linux sync. - Don't sync non U-Boot supported dts files sun8i-a23-ippo-q8h-v1.2.dts sun8i-a23-ippo-q8h-v5.dts sun8i-a33-et-q8-v1.6.dts sun8i-a33-ippo-q8h-v1.2.dts sun8i-r16-nintendo-nes-classic.dts sun8i-r16-nintendo-super-nes-classic.dts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-09-28ARM: dts: sun7i: Update A20 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 5d9ef839f874f4e3923c8a9ae7b136c6c3912cd5 Author: Stefan Mavrodiev <stefan@olimex.com> Date: Wed May 16 14:38:08 2018 +0300 ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board Note: - Update sun7i-a20-primo73.dts as per Linux, since this dts is U-Boot specific. - Drop sun7i-a20-olimex-som-evb-emmc.dts since no board added for this. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit (git 2.34.1) at 2025-01-10 16:11:44 +0000