summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-10console: unify fgetc function when console MUX is deactivatedPatrick Delaunay
Unify the fgetc function when MUX is activated or not: - always call tstc() : it is the normal behavior expected by serial uclass (call tstc then getc) and that avoids issue when SERIAL_RX_BUFFER is activated - reload WATCHDOG in the char waiting loop This patch allow to have the same behavior when CONSOLE_MUX is activated or not and avoid regression when this feature is deactivated. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-10serial: protect access to serial rx bufferPatrick Delaunay
Add test to avoid access to rx buffer when this buffer is empty. In this case directly call getc() function to avoid issue when tstc() is not called. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-10stm32mp1: activate serial rx bufferPatrick Delaunay
Activate the serial rx buffer. Prepare console MUX activation with vidconsole, and avoid console performance issue (missing character for copy-paste). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-09-10include/version.h: workaround sysroot inc orderMatt Weber
On some systems the host system or even the cross sysroot can contain a version.h. This leads to the wrong file being picked up and a PLAIN_VERSION undefined error. This workaround symlinks the version.h into the tool folder to allow reordering of search folders. Fixes http://autobuild.buildroot.net/results/770/7702d5df36a6532aafdbe6e9e62709bbfa058b54/build-end.log http://autobuild.buildroot.net/results/e34/e3401027d2fb3ce565ca9e2456a427afd3610a87/build-end.log ... additional can be found with these queries ... http://autobuild.buildroot.net/?reason=uboot-tools-2018.03 http://autobuild.buildroot.net/?reason=uboot-tools-2018.05 Upstream: pending Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
2018-09-10Prepare v2018.09Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-10.travis.yml: Fix typo in sun7i job descriptionTuomas Tynkkynen
'builman' -> 'buildman' Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2018-09-10mtd: nand: denali: fix unaligned cache operations on ARMv7 SoCsMasahiro Yamada
If the OOB size is not multiple of the cache line size, the ARMv7 cache operation still prints "Misaligned operation at range". => nand info Device 0: nand0, sector size 256 KiB Page size 4096 b OOB size 224 b Erase size 262144 b subpagesize 4096 b options 0x00104200 bbt options 0x00060000 => nand dump 0 CACHE: Misaligned operation at range [9fb15280, 9fb16360] CACHE: Misaligned operation at range [9fb15280, 9fb16360] CACHE: Misaligned operation at range [9fb15280, 9fb16360] CACHE: Misaligned operation at range [9fb15280, 9fb16360] ... The cache flushing operations won't happen in this case to cover all of the range to fix this by making sure we have things aligned. Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Reword the commit message to be clear this is a direct problem rather than just a warning]
2018-09-10fdt: fix get_next_memory_node()Marek Vasut
The get_next_memory_node() always sets mem to -1 , which is incorrect, because then every iteration of memory bank parsing will start from the first memory bank instead of the previous one. On systems with 1 memory bank defined in DT and CONFIG_NR_DRAM_BANKS=4 , like ie. r8a77965-salvator-x , this will result in U-Boot incorrectly reporting four identical memory banks with the same memory configuration. Fix this by setting mem to startoffset value, which restores the behavior before the fixed patch was applied. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Fixes: 452bc121027d ("fdt: fix fdtdec_setup_memory_banksize()") Tested-by: Michal Simek <michal.simek@xilinx.com> [on ZynqMP}
2018-09-07ARM: Specify aligned address for secure section instead of using attributesChen-Yu Tsai
In commit a1274cc94a20 ("ARM: Page align secure section only when it is executed in situ"), we used output section attributes (the "ALIGN" keyword after the colon) to specify the alignment requirements. Using the constant "COMMONPAGE" there was recently broken in binutils 2.31 [1]. Binutils maintainer Alan Modra suggested the former method would still work. Since both methods achieve the same result, this patch does just that. This fixes the "reboot after bootm" issue we've been seeing on sunxi when booting non-secure. [1] https://sourceware.org/bugzilla/show_bug.cgi?id=23571 Suggested-by: Alan Modra <amodra@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Jagan Teki <jagan@openedev.com>
2018-09-06pico-imx7d: Update the README fileFabio Estevam
Update the README file to take into accound the switch to SPL. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-05travis: Use kernel.org pre-built toolchain for riscvBin Meng
This updates travis configuration to use kernel.org pre-built toolchain for riscv. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-09-05ARM: qemu-arm: Fix qemu_arm64_defconfig for QEMU 3.0Tuomas Tynkkynen
QEMU 3.0 introduced additional memory-mapped regions for PCI-E ECAM and MMIO. Thus we need to add them to our MMU map or U-Boot will crash with a Synchronous Abort during PCI-E probing when it tries to access the unmapped ECAM memory area. Reported-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Tested-by: Jonathan Gray <jsg@jsg.id.au>
2018-09-05lib/slre: remove superfluous assignmentHeinrich Schuchardt
It makes no sense to assign a value to 'res' if the next use of the variable is an assignment. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-09-05amlogic: board p212: Fix Ethernet PHY initJasper kcoding
Without this patch the Ethernet PHY on the p212 board does not get fully configured. When this happens Ethernet does not function. The similar libretech-cc and khadas-vim boards have this code already. That's why the Ethernet on these boards do work. Signed-off-by: Jasper Kcoding <jasperkcoding@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-09-05qemu-arm: Enable DHCP distro targetAlexander Graf
When booting the QEMU virt machine with -net nic,model=e1000 we can already support network boot just fine today. So let's enable the default bootcmd to also evaluate DHCP responses properly. That way we can enable network boot seamlessly with the virt target. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-05ARM: dts: logicpd-torpedo-37xx-devkit-u-boot: Fix MMC Card DetectAdam Ford
When re-syncing the DTS files from the kernel, something caused the MMC driver to no longer detect the MMC card. Undoing the CD-invert appears to fix the issue. Fixes: e6ea2390cde3 ("ARM: DTS: Resync LogicPD-Torpedo-37xx-devkit with Linux 4.18-RC4") Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-05Merge tag 'arc-updates-for-2018.09' of git://git.denx.de/u-boot-arcTom Rini
Minor changes for ARC 1. Fix CPU clock value in HSDK's .dts so time is counted properly. 2. Enable bootelf command on EMDK
2018-09-05ARC: HSDK: Fix timer frequency valueEugeniy Paltsev
CPU (and hence cpu timers) on HSDK board runs at 500MHz after preloader so fix wrong CPU frequency value in hsdk.dts Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
2018-09-05EMDK: Enable bootelfAlexey Brodkin
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-09-04Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini
2018-09-04mx7dsabresd: Add the qspi target to the list of supported defconfigsFabio Estevam
Add an entry for mx7dsabresd_qspi_defconfig to avoid the following warnings: WARNING: no status info for 'mx7dsabresd_qspi' WARNING: no maintainers for 'mx7dsabresd_qspi' Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-09-04imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfigStefano Babic
CONFIG_CMD_MII is set without CONFIG_MII, build is broken. Signed-off-by: Stefano Babic <sbabic@denx.de>
2018-09-04colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module supportStefan Agner
This commit adds support for the Toradex Colibri iMX7D 1GB Computer on Module. The module is very similar to the Colibri iMX7D 512MB but uses eMMC instead of raw NAND. This patch introduces a new board specific Kconfig symbol to select between the two flash options. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-09-04board: toradex: common: fail gracefully on missing NAND chipStefan Agner
If the NAND chip is missing get_nand_dev_by_index() returns NULL. Fail gracefully in this case. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-09-04imx: mx7: add system suspend/resume supportAnson Huang
This patch adds system suspend/resume support, when linux kernel enters deep sleep mode, SoC will go into below mode: - CA7 platform goes into STOP mode; - SoC goes into DSM mode; - DDR goes into self-refresh mode; - CPU0/SCU will be powered down. When wake up event arrives: - SoC DSM mdoe exits; - CA7 platform exit STOP mode, SCU/CPU0 power up; - Invalidate L1 cache; - DDR exit self-refresh mode; - Do secure monitor mode related initialization; - Jump to linux kernel resume entry. Belwo is the log of 1 iteration of system suspend/resume: [ 338.824862] PM: suspend entry (deep) [ 338.828853] PM: Syncing filesystems ... done. [ 338.834433] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 338.842939] OOM killer disabled. [ 338.846182] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 338.869717] PM: suspend devices took 0.010 seconds [ 338.877846] Disabling non-boot CPUs ... [ 338.960301] Retrying again to check for CPU kill [ 338.964953] CPU1 killed. [ 338.968104] Enabling non-boot CPUs ... [ 338.973598] CPU1 is up [ 339.267155] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 339.275833] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 339.284158] mmc1: queuing unknown CIS tuple 0x80 (6 bytes) [ 339.385065] PM: resume devices took 0.400 seconds [ 339.389836] OOM killer enabled. [ 339.392986] Restarting tasks ... done. [ 339.398990] PM: suspend exit The resume entry function has to initialize stack pointer before calling C code, otherwise there will be an external abort occur, in additional, invalidate L1 cache must be done in secure section as well, so this patch also adds assembly code back and keep it as simple as possible. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch>
2018-09-04imx: mx7: add gpc initialization for low power modeAnson Huang
Add i.MX7D GPC initialization for low power mode support like system suspend/resume from linux kernel: - Pending IOMUXC IRQ to workaround GPC state machine issue; - Mask all GPC interrupts for M4/C0/C1; - Configure SCU timing; - Configure time slot ack; - Configure C0/C1 power up/down timing; - Configure wakeup source mechanism; - Disable DSM/RBC related settings. Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
2018-09-04imx: mx7: psci: improve cpu hotplug flowAnson Huang
This patch improves cpu hotplug, previous cpu_off implementation is NOT safe, a CPU can NOT power down itself in runtime, it will cause system bus hang due to pending transaction. So need to use other online CPU to kill it when it is ready for killed. Here use SRC parameter register and a magic number of ~0 as handshake for killing a offline CPU, when the online CPU checks the psci_affinity_info, it will help kill the offline CPU according to the magic number stored in SRC parameter register. Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
2018-09-04Cleanup CONFIG_BOOTDELAY on cl-som-imx7Alex Kiernan
CONFIG_BOOTDELAY has been migrated to Kconfig, but cl-som-imx7 was missed. We can just delete the assignments as the config already has the correct value. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-09-04watchdog: mx25: use the imx_watchdog driver for mx25Martin Kaiser
The existing imx_watchdog driver is compatible with mx25 chipsets. Add a WDOG1_BASE_ADDR define for the base address and enable the driver in watchdog's Makefile. To use the driver, a board must define CONFIG_IMX_WATCHDOG and CONFIG_HW_WATCHDOG. This fixes an issue when booting an mx25 chip via usb/serial. In this case, the boot rom will always enable the watchdog. If u-boot is running in interactive mode and the watchdog is not serviced, the system is rebooted when the watchdog expires. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-09-04imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-bootYe Li
Convert the codes and configurations to enable DM drivers in u-boot for modules: i2c, PMIC, regulator, USB, Ethernet, SD/MMC, GPIO and QSPI This patch does not change SPL, so it still uses non-DM driver for UART, GPIO and SD/MMC. Signed-off-by: Ye Li <ye.li@nxp.com>
2018-09-04dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boardsYe Li
Add the board DTS files for 14x14 EVK and 9x9 EVK. They are necessary for converting to use u-boot DM driver. Two -u-boot.dtsi are added to modify compatible string of SPI flash device to "spi-flash". Signed-off-by: Ye Li <ye.li@nxp.com>
2018-09-04dts: imx6ul: Update alias to support DMYe Li
Add spi0 alias for qspi for enabling DM SPI. Change usb alias for usbotg1 and usbotg2 for enabling DM USB Signed-off-by: Ye Li <ye.li@nxp.com>
2018-09-04imx: imx7d-sdb: Add DM QSPI supportYe Li
On iMX7D SabreSD board, the QSPI has pins conflict with EPDC (default). To use QSPI, users have to rework the board (de-populate R388-R391, R396-R399 populate R392-R395, R299, R300). So we add new DTS file and new defconfig dedicated for QSPI. Other changes to support the DM QSPI: - Add QSPI node and alias spi0. - Modify spi4 (spi-gpio) node and add alias spi5 for it to avoid req conflict - Add EPDC node in imx7d.dtsi and disable it in imx7d-sdb-qspi.dts to align with kernel and also present the conflict. - Add -u-boot.dtsi to modify compatible string of mx25l51245g@0 to "spi-flash" - Remove iomux settings of qspi in board codes which is not needed for DM driver. Signed-off-by: Ye Li <ye.li@nxp.com>
2018-09-04imx: imx6sx-sabreauto: convert to use DM QSPI driverYe Li
To support DM QSPI driver: - Add -u-boot.dtsi to modify n25q256a@0 and n25q256a@1 compatible string to "spi-flash" and add "num-cs" property. - Enable DM SPI and DM SPI FLASH configurations - Remove iomux settings of qspi1 in board codes which is not needed for DM driver. Signed-off-by: Ye Li <ye.li@nxp.com>
2018-09-04imx: imx6sx-sdb: Enable DM QSPI driverYe Li
To support DM QSPI driver - Add spi0 and spi1 alias for qspi1 and qspi2. - Add -u-boot.dtsi to modify n25q256a@0 and n25q256a@1 compatible string to "spi-flash" and add "num-cs" property. - Enable DM SPI/QSPI relavent configurations - Remove iomux settings of qspi2 in board codes which is not needed for DM driver. - Add sf default settings. So running "sf probe" can detect the flash Signed-off-by: Ye Li <ye.li@nxp.com>
2018-09-03Prepare v2018.09-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-03configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-31spl: Kconfig: Fix typo in 'Upgrade'Fabio Estevam
Correct the spelling of 'Upgrade'. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-08-31Make kmalloc'ed memory really DMA-safeMasahiro Yamada
In Linux, the memory returned by kmalloc() is DMA-capable. However, it is not true in U-Boot. At a glance, kmalloc() in U-Boot returns address aligned with ARCH_DMA_MINALIGN. However, it never pads the allocated memory. This half-way house is completely useless because calling kmalloc() and malloc() in this order causes a cache sharing problem. Change the implementation to call malloc_cache_aligned(), which allocates really DMA-capable memory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-31test: fix typo in cmd_ut_category() descriptionHeinrich Schuchardt
argc = 1: all tests are run argc > 1: only argv[1] is run So we need argc >= 1. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-31hisilicon: hikey: Update instructions based on latest sourceManivannan Sadhasivam
Update the HiKey board instructions based on the latest source available. These instructions are derived from the ATF platform doc. While updating the instructions, some comments on ATF issue has been removed since it is fixed in latest ATF source. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-08-30Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-08-30Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2018-08-30Merge branch 'master' of git://git.denx.de/u-boot-rockchipTom Rini
2018-08-30Merge git://git.denx.de/u-boot-x86Tom Rini
2018-08-30mmc: renesas-sdhi: Use priv directlyMarek Vasut
The dev_get_priv(dev) is used twice in the probe function. Replace the second invocation with priv variable. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-08-30x86: zimage: Remove acpi_rsdp_addr propagation to kernel boot parametersBin Meng
As of today, the proposal of adding "acpi_rsdp_addr" to the kernel boot protocol does not make its way to the kernel mainline. This creates some confusion if we leave it in the U-Boot code base. Remove it for now until we have a clear picture with kernel upstream. Note this eventually does a partial revert to commit 3469bf427454 ("x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-30x86: efi: payload: Turn on acpi in the kernel command lineBin Meng
Now that we have full Linux kernel boot support on EFI payload, avoid pass "acpi=off" to the kernel command line. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-30x86: zimage: Support booting Linux kernel from an EFI payloadBin Meng
At present Linux kernel loaded from U-Boot as an EFI payload does not boot. This fills in kernel's boot params structure with the required critical EFI information like system table address and memory map stuff so that kernel can obtain essential data like runtime services and ACPI table to boot. With this patch, now U-Boot as an EFI payload becomes much more practical: it is another option of kernel bootloader, ie, can be a replacement for grub. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-30efi: stub: Pass EFI system table address to U-Boot payloadBin Meng
This updates the EFI stub codes to pass UEFI BIOS's system table address to U-Boot payload so that U-Boot can utilize it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-29 18:55:10 +0000