summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-24arm64: zynqmp: Move SoC sources to mach-zynqmpMichal Simek
Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24ARM: zynq: Convert all boards to OF_SEPARATEMichal Simek
Build warning was added by: "fdt: Add warning about CONFIG_OF_EMBED" (sha1: 841d5fbae4e993476fa87d8933db0cd58d3c2d41) Zynq mini configurations are not moved yet and it is questionable if make sense to move them too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm: zynq: Enable CONFIG_REMAKE_ELFSiva Durga Prasad Paladugu
This patch enables CONFIG_REMAKE_ELF for Zynq platform so that it generates u-boot.elf from binary which works for all Zynq boards with OF_SEPARATE option enabled. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Convert all reference boards to OF_SEPARATEMichal Simek
Build warning was added by: "fdt: Add warning about CONFIG_OF_EMBED" (sha1: 841d5fbae4e993476fa87d8933db0cd58d3c2d41) ZynqMP mini configurations are not moved yet and it is questionable if make sense to move them too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Align u-boot-spl.bin for boot.bin creationMichal Simek
Bootrom is not capable to work with non align bootloader partition that's why it is necessary to align it before boot.bin creation. The patch is creating new spl/u-boot-spl-align.bin which is used only for boot.bin. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-24tools: zynqmpimage: Align image_size/image_stored_sizeMichal Simek
Bootrom is not capable to work with non aligned bootloader sizes. SPL with OF_SEPARATE generates non-align images quite often that's why this change is required before OF_SEPARATE enableding. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24travis: Wire Xilinx Versal Virt platformMichal Simek
Test Xilinx Versal Virt platform running on the v3.1.0 Qemu. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Disable MMC for for zc12xx_revA boardsMichal Simek
All these boards have no SD enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Enable FPGA_LOAD_SECURE commandMichal Simek
Enable fpga load secure feature for xilinx platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Enable ISSI flash for some platformsMichal Simek
Enable ISSI flash for platforms. Xilinx reference boards are also used internally with different flash part to increase coverage that's why enable also ISSI parts for all these boards even if that board is released only with one part. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Enable SPI on several boardsMichal Simek
Enable GQSPI driver, SF command and SPL support for some platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Setup proper SPI dependencyMichal Simek
Select DM_SPI/DM_SPI_FLASH for the whole SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24ARM: zynqmp_r5: Setup DM_ETH/MMC if NET/MMC is enabledMichal Simek
Setup proper ETH/MMC dependency for the whole platform. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Enable net configs for zc1275Siva Durga Prasad Paladugu
This patch enable net configs for zc1275 board. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Setup DM_ETH/MMC if NET/MMC is enabledMichal Simek
Setup proper ETH/MMC dependency for the whole platform. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: versal: Setup DM_ETH/MMC if NET/MMC is enabledMichal Simek
Setup proper ETH/MMC dependency for the whole platform. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24fpga: zynqmp: show an error message when FPGA programming failsLuca Ceresoli
When FPGA programming fails, it does so silently, unless debugging code is enabled. This makes it hard to detect problems in production environments. Print the error message unconditionally so the error doesn't go unnoticed. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Fix tcminit help text alignmentMichal Simek
Trivial patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24net: phy: Move fixed link code to separate routineSiva Durga Prasad Paladugu
This patch moves fixed-link functionality code to a separate routine inorder to make it more modular and cleaner. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-01-24arm64: zynqmp: Fix mmc node names to be in sync with kernelSiva Durga Prasad Paladugu
This patches renames sd nodes in dts to be in line with kernel. This patch also modifies the references for the same in code. It checks mmc first to have no time penalty for new DT node names based on left-to-right expression evaluation. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24zynq-gem: Use appropriate cache flush/invalidate for RX and TXStefan Theil
The cache was only flushed before *transmitting* packets, but not when receiving them, leading to an issue where new packets were handed to the receive handler with old contents in cache. This only happens when a lot of packets are received without sending packages every now and then. Also flushing the receive buffers in the transmit function makes no sense and can be removed. Signed-off-by: Stefan Theil <stefan.theil@mixed-mode.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Protect board_late_init functionMichal Simek
Function should be compiled only when CONFIG_BOARD_LATE_INIT is defined. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Do not protect zynqmp_pmufw_version()Michal Simek
There is hard dependency for CLK_ZYNQMP to have zynqmp_pmufw_version() but also FPGA code is calling this function which is possible to use without actual CLK_ZYNQMP firmware driver to be enabled. This patch enables the case where only fixed-clock CLK setup is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24mmc: zynq: Remove unused pwrseq variableMichal Simek
This variable was incorrectly added by: "mmc: zynq_sdhci: Add support for SD3.0" (sha1: d1f4e39d58db32a4fd1a1b4085e0ede498bd773f) which had nothing to do with MMC power sequence provider. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24arm64: zynqmp: Enable 2 NAND chips for zc1751 dc2Michal Simek
This board contains 2 nand chips that's why enable this feature. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24mtd: nand: arasan_nfc: Add support for nand multi chip selectT Karthik Reddy
This patch adds support for nand multi chip select. Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number of nand chips. Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24tools: zynqmpimage: round up partition sizeMichael Tretter
The FSBL copies "Total Partition Word Length" * 4 bytes from the boot.bin, which implies that the partition size is 4 byte aligned. When writing the partition, mkimage calculates "Total Partition Word Length" by dividing the size by 4. This implicitly cuts unaligned bytes at the end of the added binary. Instead of rounding down, the size must be round up to 4 bytes and the binary padded accordingly. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-23Merge tag 'mips-pull-2019-01-23' of git://git.denx.de/u-boot-mipsTom Rini
- MIPS: mscc: ocelot: add ethernet switch and network support - MIPS: mscc: add support for ServalT SoC family - MIPS: mscc: add support for Serval SoC family
2019-01-23MSCC: Add board support for Serval SoC family.Horatiu Vultur
Add board support and configuration for Jaguar2 SoC family. The detection of the board type is based on the phy ids. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23MSCC: Add device tree for Serval pcb106 boardHoratiu Vultur
Add device tree based on evaluation board pcb106. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23MSCC: add device tree for Serval pcb105 boardHoratiu Vultur
Add device tree based on evaluation board pcb105. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23MSCC: Add support for Serval SoC family.Horatiu Vultur
As Ocelot, Servalt, Luton and Jaguar2, this family of SoCs are found in Microsemi Switches solution. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23pinctrl: mscc: Add gpio and pinctrl for Serval SoC family.Horatiu Vultur
The Serval SoC family has 32 pins. Currently there is no support for Serval in Linux kernel. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23MSCC: Add board support for Servalt SoC familyHoratiu Vultur
Add board support, configuration and DTS for Servalt SoC family. Currently there is one board in this family. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23MSCC: Add support for Servalt SoC family.Horatiu Vultur
As Ocelot, Luton and Jaguar2, this family of SoCs are found in Microsemi Switches solution. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23pinctrl: mscc: Add gpio and pinctrl for Servalt SoC family.Horatiu Vultur
The Servalt SoC family has 36 pins. Currently there is not support for Servalt pinctrl in Linux kernel. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23configs: mscc_ocelot: add network supportGregory CLEMENT
Now that network support is added for the ocelot platform, let's add it in the default configuration. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-23MIPS: mscc: ocelot: add switch reset supportGregory CLEMENT
On some ocelots platform a workaround is needed in order to be able to reset the switch without resetting the DDR. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-23net: add MSCC Ocelot switch supportGregory CLEMENT
This patch adds support for the Microsemi Ethernet switch present on Ocelot SoCs. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23MIPS: mscc: ocelot: Add ethernet nodes for OcelotGregory CLEMENT
Import Ethernet related nodes from Linux Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-22Merge git://git.denx.de/u-boot-nds32Tom Rini
- Support nds32 prebuilt toolchain. - Fix some compile issues. - Fix dts mmc node compatible string.
2019-01-22nds32: dts: Fix mmc node compatible stringRick Chen
In the two commits: cf3922dddc44a968685b535f2af195f1e51f4a7b mmc: ftsdc010_mci: Sync compatible with DT mmc node c14e90e8445e7b1c3531b4bdeb778c47bd6570eb riscv: dts: Sync DT with Linux Kernel ftsdc010_mci's compatible has been modified as "andestech,atfsdc010" for RISC-V synchronization. But ae3xx.dts and ag101p.dts which are used for nds32 adp-ae3xx and adp-ag101p platforms did not be modified correctly at that time. It will cause mmc detection failure. Fix it here. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2019-01-22nds32: Fix boot fail issue when build with elf-mculib.Rick Chen
Add -mcmodel=large can let elf-mculib have the same default behavior just like linux-glibc. And it help to pass U-Boot booting sequence. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2019-01-22nds32: Generate SW fpu instruction.Rick Chen
Force it to generate SW fup instruction. It help to avoid bugs when running on no-HW-fpu board, but compile with v3f which support HW fpu instruction. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2019-01-22nds32: Remove gcc unused optionRick Chen
-G0 is an old option, not support now, So remove it. It can help to fix compile error when build with nds32 pre-build toolchain. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2019-01-22.travis.yml: Support nds32 prebuilt toolchainRick Chen
Download nds32 prebuild toolchain from github which is base on gcc 8.0.1 version for regression. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2019-01-21Merge git://git.denx.de/u-boot-marvellTom Rini
- Sync Armada-38x dts with Linux 4.20 from Chris - Misc changes and enhancements to Turris Mox (v4) from Marek - Reserve PSCI area for Armada 8k from Heinrich - New Allied Telesis x530 board (Armada-385) from Chris - Misc minor changes (defconfig etc)
2019-01-21Merge git://git.denx.de/u-boot-mpc83xxTom Rini
2019-01-21Revert "env: sf: fix environment in SPI NOR"Tom Rini
Per Heiko the original changes were correct and something is misbehaving on his hardware. This reverts commit 3d5931e5986a49c44cdab845c6751d845812e8d8. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-21ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to KconfigDerald D. Woods
This commit converts the following items to Kconfig: CONFIG_ATMEL_NAND_HWECC CONFIG_ATMEL_NAND_HW_PMECC CONFIG_PMECC_CAP CONFIG_PMECC_SECTOR_SIZE CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER [PMECC References] https://www.at91.com/linux4sam/bin/view/Linux4SAM/PmeccConfigure https://www.at91.com/linux4sam/bin/view/Linux4SAM/AT91Bootstrap [Mailing List Thread] https://lists.denx.de/pipermail/u-boot/2018-December/350666.html Fixes: 5541543f ("configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment") [trini: Make the migration be size neutral and possibly not fix the above in all cases] Reported-by: Daniel Evans <photonthunder@gmail.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit (git 2.34.1) at 2025-01-08 05:30:09 +0000