summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-04-22dm: test: Add tests for device's uclass platform dataPrzemyslaw Marczak
This test introduces new test structure type:dm_test_perdev_uc_pdata. The structure consists of three int values only. For the test purposes, three pattern values are defined by enum, starting with TEST_UC_PDATA_INTVAL1. This commit adds two test cases for uclass platform data: - Test: dm_test_autobind_uclass_pdata_alloc - this tests if: * uclass driver sets: .per_device_platdata_auto_alloc_size field * the devices's: dev->uclass_platdata is non-NULL - Test: dm_test_autobind_uclass_pdata_valid - this tests: * if the devices's: dev->uclass_platdata is non-NULL * the structure of type 'dm_test_perdev_uc_pdata' allocated at address pointed by dev->uclass_platdata. Each structure field, should be equal to proper pattern data, starting from .intval1 == TEST_UC_PDATA_INTVAL1. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22dm: core: Extend struct udevice by '.uclass_platdata' field.Przemyslaw Marczak
This commit adds 'uclass_platdata' field to 'struct udevice', which can be automatically allocated at bind. The allocation size is defined in 'struct uclass_driver' as 'per_device_platdata_auto_alloc_size'. New device's flag is added: DM_FLAG_ALLOC_UCLASS_PDATA, which is used for memory freeing at device unbind method. As for other udevice's fields, a complementary function is added: - dev_get_uclass_platdata() Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22dm: core: add internal functions for getting the device without probePrzemyslaw Marczak
This commit extends the uclass-internal functions by: - uclass_find_first_device() - uclass_find_next_device() For both functions, the returned device is not probed. After some cleanup, the above functions are called by: - uclass_first_device() - uclass_next_device() for which, the returned device is probed. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22cmd_scsi: Enable SoC AHCI device on platforms with PCItang yuantian
Current driver assumes the AHCI is connected to PCI, this is not true on some SoCs, e.g. LS1021A, which has PCI but the AHCI is in SoC. This patch will enable embedded AHCI devices on platforms with PCI. PCI AHCI devices still can be used by commenting CONFIG_SCSI_AHCI_PLAT option in head file. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-04-22stm32f4: Add support for stm32f429-discovery boardrev13@wp.pl
Signed-off-by: Kamil Lulko <rev13@wp.pl> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-04-22stm32f4: Add serial driverrev13@wp.pl
Signed-off-by: Kamil Lulko <rev13@wp.pl> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-04-22ARMv7M: Add STM32F4 supportrev13@wp.pl
Signed-off-by: Kamil Lulko <rev13@wp.pl> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-04-22ARM: Add ARMv7-M supportrev13@wp.pl
Signed-off-by: Kamil Lulko <rev13@wp.pl>
2015-04-22unzip: add gzwrite command to write compressed image to block deviceEric Nelson
Add gzwrite command to write gzip-compressed images to block devices. Input must be gzip-compressed according to RFC1952, since the crc and file size in the trailer will be confirmed during operation. The decompressed file size must be specified on the command line for images with decompressed sizes >= 4GiB because the trailer only contains the low 32 bits of the original file size. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2015-04-22gunzip: add gzwrite routine for extracting compresed images to block deviceEric Nelson
Initial filesystem images are generally highly compressible. Add a routine gzwrite that allows gzip-compressed images to be written to block devices. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Reviewed-by: Tom Rini <trini@ti.com>
2015-04-22mx6sabresd: Remove uneeded ifdefFabio Estevam
RTT_NOM_120OHM is not defined, so remove its ifdef. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-04-22mx6sabresd: Fix SPL memory descriptionFabio Estevam
mx6sabresd has four MT41K128M16JT-125 chips. Each memory has 16-bit bus and 2GiB, so fix the width and density fields accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-04-22nitrogen6x: allow gzipped bitmap displayEric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2015-04-22iMX: Fix compilation error when enabling SECURE_BOOTgaurav rana
Move the compilation of file fsl_validate.c in MACRO CONFIG_CMD_ESBC_VALIDATE. This file should be compiled only when the above MACRO is defined This caused a break in compilation of iMX platforms when compiling for SECURE_BOOT Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com>
2015-04-22arm: mx6: tqma6: Extract baseboard configs into separate config fileStefan Roese
This patch extracts all baseboard specific defines into a separate config file. This makes it easier to add other baseboards that use the TQMa6 SoM. This patch will be used by the upcoming WRU-IV board support which also uses the TQMa6 SoM. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Stefano Babic <sbabic@denx.de> Acked-By: Markus Niebel <Markus.Niebel@tq-group.com>
2015-04-22power: pfuze100: fix LDO_EN bit valueTim Harvey
The LDO_EN is bit 4, not value 4. This is only used on the Ventana boards so we will change it in the header as the other values there are in terms of values and not bit numbers. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: Update missing memory/calib handlingPushpal Sidhu
This commit combines catching missing memory and calibration data into one if() block. It further prints pertinent information in determining why the failure occurred. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: Add new memory configurationPushpal Sidhu
Add memory configuration for an IMX6SDL + 1GB density DRAM. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: set HDMI video in to yuv422bt656 for GW551x-ATim Harvey
The initial revision of the GW551x does not connect enough signals between the HDMI receiver and the IMX6 CSI for 16bit capture mode necessary for yuv422smp capture. Future revisions will, but for the initial rev force it to yuv422bt656 mode which requires an 8bit video data bus. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: use hdmiinfmt env var to override HDMI capture formatTim Harvey
The HDMI receiver used on the GW54xx and GW551x has a 16bit video data bus interconnect between it and the IMX6 CSI. This can be used in two different modes, each having advantages and disadvantages. Allow the hdmiinfmt env var to specify which format is desired (yuv422smp or yuv422bt656). Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: add DT fixup for GW522x to change PCIE_RST# GPIOPushpal Sidhu
The GW522x is functionally the same as a GW52xx except for PCIE_RST# GPIO. Add a DT fixup to change this gpio upon bootup. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: add 'gsc wd' command for enabling and disabling GSC watchdogTim Harvey
This adds information about the Gateworks System Controller to the gsc command such as the firmware version, firmware CRC and status of the GSC watchdog (if its enabled and if its tripped). Additionally the 'gsc wd' command can be used to enable or disable the watchdog with the following usage: gsc wd enable [30|60] gsc wd disable Note that the GSC registers are battery-backed by the GSC coincell so once eanbled, they remain enabled across power-cycles or until either the GSC firmware has been updated or FLASH has been re-programmed by the Gateworks JTAG adapter. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: added device-tree display configuration for LVDS displaysTim Harvey
Configure kernel device-tree for display from env var. This is useful to specify the display present when the device-tree supports multiple non-detectable display configurations. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: add support for DLC-700JMGT4 and DLC-800FIGT3 LCD displaysTim Harvey
Add LVDS support for two LVDS LCD displays: DLC-700JMGT4 - 7" 1024x600 DLC-800FIGT3 - 8" 1024x768 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: add DT fixup for GW54xx compatibility with older kernelsTim Harvey
Certain older kernels in use by some customers erroneously define a uart3 for GW54xx with a pinmux that conflicts with NAND. This will remove that node to avoid such conflicts. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: remove 128x16 calibration (share with 128x32)Tim Harvey
The calibration data for dual 2Gb density chips can be used for a single 2Gb density chip. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: updated 16bit DDR calibrationTim Harvey
Updated 16bit DDR calibration using values obtained from running the i.MX6 DDR Stress Test tool over a set of boards over full operationg temperature. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: added DT fixup for GW551x-A video inputTim Harvey
The GW551x-A revision does not have the CSI0_DATA_EN pin connected, therefore we need to make sure that signal is not muxed to the CSI_DATA_EN signal internally and do so by steering it to the unused GPIO5_IO20. We do this so that the kernel device-tree can properly define the signal for RevB and beyond boards that do have this hooked up properly and require it. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: gsc: add new hwmon railsTim Harvey
Add a new voltage rail added in various -C revision PCB's. Additionally make VDD_CORE, VDD_SOC, and VDD_IO2 common as all Ventana boards have those. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: add mem_mb dynamic env varTim Harvey
Certain OS bootscripts need to know how much memory a board has to adjust kernel parameters (namely Android). This allows those boards to determine mem size in MB. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: remove GSC hwmon voltage rail min/max testTim Harvey
The min/max of each depends not only on board but on CPU. Simplify by removing this rarely needed and difficult to maintain feature and just display the rails and their values. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: update boot scripts to support ubifs boot volTim Harvey
Added support in default boot scripts to find kernel/dtbs on a boot volume separate from rootfs volume. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: only pinmux FEC enet signals for boards using itTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: add wdis config for GW5520Tim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: add usb_pgood_delay 2sec defaultTim Harvey
We have encountered many USB storage devices that require more warm-up than the spec allows for. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: Add support for GW551xTim Harvey
The GW551x is a small form factor board based on the IMX6 SoC that includes: * up to 512MB DDR3 memory * up to 2GB NAND flash * 1x miniPCIe socket (with USB) * HDMI out (micro-HDMI) * HDMI in (micro-HDMI) * TTL level I/O (supported by GW16111 breakout board): * I2C * 2x UART * CAN * 2x DIO (GPIO/PWM) * USB OTG Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: disable IMX6 watchdogs on GW51xx RevA and RevBTim Harvey
A board level errata causes the IMX6 watchdog to be unstable on the GW51xx RevA and RevB boards which can cause the watchdog to trip extremely early (under 5seconds) under certain operating conditions. Disable the watchdog node in the device-tree to work around this issue. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: fix various sparse warningsTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: config: enable EXT4 filesystem read/write supportTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: config: enable edid supportTim Harvey
Enable the 'i2c edid' command to query and display data from an attached HDMI monitor of LVDS display with an EDID device. Example: Ventana > i2c dev 2 && i2c edid 0x50 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: config: Support ramdiskTim Harvey
Set the initrd_high env so that ramdisk range can be properly set. See commit 7e9603e and README Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: config: add USB Mass Storage (ums) supportTim Harvey
Add support for the USB mass storage gadget to enable access to on-board storage. Example: Ventana > ums 0 mmc 0 # provide ums access to the uSD Ventana > ums 0 usb 0 # provide ums access to the first USB device Ventana > ums 0 sata 0 # provide ums access to an mSATA device Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: set LTC3676 PMIC to appropriate values per datasheetTim Harvey
The IMX6 Datasheets specifies that when the IMX6 LDO is enabled (internal Anatop LDO's for VDD_ARM, VDD_SOC, and VDD_xPU) you need to provide 1350mV on VDD_ARM_IN and VDD_SOC_IN for IMX6Q@1GHz (Automotive) and 1275mV for IMX6DL@800MHz (Industrial). While we are still about 50mV shy on the IMX6Q operating at 1GHz we set it to the max we can and leave it up to the kernel to implement a regulator driver for the LTC3676 and put the LDO's in bypass mode which allows us to drop the voltages by 125mV respectively. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: add support for 4Gb density mem devices with IMX6DLTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: enable precharge power-down fast-exit modeTim Harvey
Enable fast-exit precharge mode necessary for some DDR3 devices being used on Ventana boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: add usb_pcisel hwconfig supportTim Harvey
The GW52xx has a MUX that can direct front-panel USB OTG to one of the miniPCIe sockets (for use with a cellular modem for example). Use hwconfig to steer this. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: remove unused GPIO configurationTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: assign default ethprime dynamicallyTim Harvey
Gateworks Ventana boards don't all use IMX6 FEC, so lets define default ethprime based off the first detected device. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: add i210 supportTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22imx: ventana: disable 4k tftp/nfs packetsTim Harvey
I've encountered issues when using 4k packets through certain switches. For now disable this and go back to using MTU size packets. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
generated by cgit (git 2.34.1) at 2025-02-10 02:05:45 +0000