uboot-2021-rebase.git - uboot 2021 rebase, to fix booting on modern SD cards, from https://github.com/fifteenhex/u-boot/tree/am335x_som

Age	Commit message (Expand)	Author
2015-11-19	net: zynq: Remove unused MDCCLKDIV2 macro	Michal Simek
2015-11-19	net: zynq: Fix mdc clock division setting for 100Mbit/s	Michal Simek
2015-11-19	net: zynq: Wait till packet is sent	Michal Simek
2015-11-19	net: zynq: Disable secondary queues	Edgar E. Iglesias
2015-11-19	net: zynq: Add dummy packet to fix packet duplication issue	Michal Simek
2015-11-19	net: zynq: Do not report TX underrun	Michal Simek
2015-11-19	net: zynq: Setup BD when structures are filled	Michal Simek
2015-11-19	net: zynq: Allocate BD_SPACE in connection to RX_BUF	Michal Simek
2015-11-19	net: zynq: Fix clearing statistic	Michal Simek
2015-11-19	net: zynq: Extend register description with offsets	Michal Simek
2015-11-19	net: zynq: Add support for different PHY interface types	Michal Simek
2015-11-19	net: zynq: Add debug message to phyread/phywrite	Michal Simek
2015-11-19	ARM: zynq: Add target for building bootable SPL image for Zynq	Nathan Rossi
2015-11-19	tools: zynqimage: Add Xilinx Zynq boot header generation to mkimage	Nathan Rossi
2015-11-19	ARM64: zynqmp: Enable TI phy by default	Michal Simek
2015-11-19	net: phy: Add support for Texas Instruments DP83867	Edgar E. Iglesias
2015-11-19	ARM: zynq: Choose boot image based on OF_SEPARATE macro	Michal Simek
2015-11-19	zynqmp: mp: Add support for booting R5 from any address	Michal Simek
2015-11-18	itest: add missing break statements to evalexp()	Stephen Warren
2015-11-18	test: fat: add error-checking to non-contig test	Stephen Warren
2015-11-18	Fix sandbox build on Ubuntu 10.04	Stephen Warren
2015-11-18	km/powerpc: fix ft_board_setup prototype for km82xx & km83xx	Valentin Longchamp
2015-11-18	powerpc/83xx: add support for kmtegr1 board	Valentin Longchamp
2015-11-18	km8309: change the default QE_FW address	Valentin Longchamp
2015-11-18	km83xx: use CONFIG_ENV_ADDR for the newenv env command	Valentin Longchamp
2015-11-18	board/keymile/km82xx: setting dip_switch 3 and 4 will run bootloader	Bagavathiannan Palanisamy
2015-11-18	powerpc/km8360: fix the ODT parameters for CS0	Valentin Longchamp
2015-11-18	powerpc/km8309: define CONFIG_SYS_DDRCDR	Valentin Longchamp
2015-11-18	powerpc/km8321: define CONFIG_SYS_DDRCDR	Valentin Longchamp
2015-11-18	km/powerpc82xx: remove unused function	Holger Brunck
2015-11-18	km/powerpc: remove unneeded defines	Holger Brunck
2015-11-18	km/powerpc: move open firmware defines to km-powerpc.h	Holger Brunck
2015-11-18	km/powerpc: increase space for kernel imange and FDT blob	Holger Brunck
2015-11-18	powerpc/82xx/km: add testpin detection for mgcoge3ne	Holger Brunck
2015-11-18	powerpc/82xx: make set/get_pin for km82xx more flexible	Holger Brunck
2015-11-18	powerpc/83xx: add support for kmtepr2 board	Christoph Dietrich
2015-11-18	km/scripts: search for kernel/DTBs at serverip:/PRODUCTNAME via TFTP in devel...	Tobias Müller
2015-11-18	km/scripts: load fdt_bid_kwkey.dtb when working with tftp	Holger Brunck
2015-11-18	km: update the boot script to check for a DTB	Valentin Longchamp
2015-11-18	km/common: stop u-boot only if someone press <SPACE>	Holger Brunck
2015-11-18	arm/km_kirkwood: fix the #ifdef for KM_COGE5UN dip switch	Valentin Longchamp
2015-11-18	arm/mgcoge3un: check dip_switch at startup	Holger Brunck
2015-11-18	arm/km: Fix LED configuration for 88E1118R PHY (PIGGY3)	Tobias Müller
2015-11-18	arm/km_kirkwood: remove KM_ENV_BUS and use CONFIG_I2C_ENV_EEPROM_BUS	Valentin Longchamp
2015-11-18	board/ti/am335x: add support for BeagleBone Green	robertcnelson@gmail.com
2015-11-18	common: add CMD_GPIO to Kconfig	Thomas Chou
2015-11-18	git-mailrc: Add Bin as a maintainer of x86	Bin Meng
2015-11-18	omap3: cm-t3517: add board specific get_board_rev()	Dmitry Lifshitz
2015-11-18	spl: mmc: add support for BOOT_DEVICE_MMC2	Nikita Kiryanov
2015-11-18	arm: mx6: cm-fx6: define fallback boot devices for spl	Nikita Kiryanov