summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-20dm/pci: Change the first CFG read to Vendor ID in enumerationHou Zhiqiang
As the PCIe specification recommend reading the Vendor ID register to determine if a Function is present, read the Vendor ID of a non-existent Function must not result in system error, so we'd better make the first CFG read to Vendor ID instead of Header Type register in the PCIe enumeration. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-11-20Merge git://git.denx.de/u-boot-marvellTom Rini
- Clearfog GT-8K support added by Baruch / Raheeb - const and sizes cleanup (also in MIPS) from Baruch - Minor cleanup to db-88f6820 from Chris
2018-11-20Merge branch '2018-11-19-master-imports'Tom Rini
- adc enhancements - FAT fix
2018-11-20fs: fat: assign rootdir sector when accessing root directoryThomas RIENOESSL
This fixes problems accessing drives formated under Windows as FAT16. Signed-off-by: Thomas RIENOESSL <thomas.rienoessl@bachmann.info> [trini: Rebase on top of f528c140c801] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-20clk: meson: fix clk81 divider calculationJerome Brunet
clk81 divider is 0 based (meaning that 0 value in the register means divide by 1). Fix clk81 rate calculation for this. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-20cmd: adc: add an option to scan some or all available channelsFabrice Gasnier
Add new option to 'adc' command to do a single scan of: - some channel(s), using mask argument - all channels available on an ADC device (when optional mask is omitted). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-20cmd: adc: print single conversion also in uVFabrice Gasnier
Use newly introduced adc_raw_to_uV() API to print conversion result both as raw value and micro-volts by default. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-20cmd: adc: add info on channel maskFabrice Gasnier
Enhance adc info command to report also the channel mask. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-20dm: adc: add uclass's mask and conversion helpersFabrice Gasnier
Add two functions to ADC uclass's: - adc_raw_to_uV() to ease ADC raw value conversion to microvolts - adc_channel_mask() to get channels on consumer side Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-20ARM: mvebu: dts: add Clearfog GT-8KRabeeh Khoury
The SolidRun Clearfog GT-8K is based on Armada 8040. https://wiki.solid-run.com/doku.php?id=products:a8040:clearfoggt8k The config file is identical to the Macchiatobin one (mvebu_mcbin-88f8040_defconfig) with only the default device-tree changed. Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-20ARM: mvebu: db-88f6820: remove redundant commentChris Packham
After migration to Kconfig the comment about TEXT_BASE has become redundant. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-20arm64: mvebu: a8k: autodetect RAM sizeBaruch Siach
Some Armada 8K boards like Macchiatobin and Clearfog GT-8K use RAM from external DIMM. Hard coding the RAM size in the device-tree is not convenient. Fortunately, the ATF that initializes the RAM knows the size of RAM, and U-Boot can query the ATF using a SMC call. The ATF maps the lower 3G of RAM starting at address 0. Higher RAM is mapped at 4G. This leaves a 1G hole between 3G and 4G for IO peripherals. Use a second bi_dram[] entry to describe the higher RAM area. As a result, CONFIG_NR_DRAM_BANKS must be set to 2 to use more than 3GB RAM. This code in this commit is mostly taken from downstream Marvell U-Boot code by Grzegorz Jaszczyk. Cc: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-20linux/sizes.h: sync from kernelBaruch Siach
The kernel added SZ_4G macro in commit f2b9ba871b (arm64/kernel: kaslr: reduce module randomization range to 4 GB). Include linux/const.h for the _AC macro. Drop a local SZ_4G definition in tegra code. Cc: Tom Warren <twarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-20MIPS: drop asm/const.hBaruch Siach
Commit 86f21c96f467368 (mips: Use common _AC macro now.) removed the _AC definition from const.h. All other macros defined in const.h are not used anywhere, and there is now no user of this header. Remove this header. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-20Use _AC and UL macros from linux/const.hBaruch Siach
Drop the _AC and UL macros from common.h. Linux headers is the original source of this macro, so keep its definition in the same header. Update existing users of these macros to include const.h directly. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Rick Chen <rick@andestech.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-20linux/const.h: import from kernelBaruch Siach
Combine the uapi/linux/const.h header into the kernel linux/const.h. The next commit will use the _AC macro this header instead of the common.h definition. Based on Linux kernel version 4.19. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-18Merge tag 'mips-pull-2018-11-18' of git://git.denx.de/u-boot-mipsTom Rini
- tree-wide: introduce LDFLAGS_STANDALONE - MIPS: fix long-standing issue with linking of standalone programs - MIPS: MT76xx: add GPIO and WDT drivers - MIPS: MT76xx: various fixes and updates to gardena-smart-gateway board - MIPS: MT76xx: various fixes and updates to linkit-smart-7688 board
2018-11-18MIPS: fix linking of standalone programsDaniel Schwierzeck
Use the global MIPS specific u-boot.lds for linking standalone programs instead of the outdated ones in examples/standalone/. Also pass --gc-sections in LDFLAGS_STANDALONE to optimize the size of standalone programs. Finally remove the deprecated config.mk files in arch/mips/cpu/mips[32,64]/. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18Kbuild: standalone: do not ignore platform-specific OBJCOPYFLAGSDaniel Schwierzeck
Currently the OBJCOPYFLAGS are cleared when assigning "-O srec" or "-O binary" for standalone programs. All flags set by arch-specific Makefiles are lost. This is bad if an arch demands arch-specific flags for the objcopy step. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-11-18Kbuild: add LDFLAGS_STANDALONEDaniel Schwierzeck
Introduce a new Makefile variable for passing LDFLAGS to standalone programs. Currently the variable CONFIG_STANDALONE_LOAD_ADDR is misued on some archs to pass a specific linker script. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-18mips: mt76xx: linkit-smart-7688: Misc updates to dts/config/defconfigStefan Roese
These misc updates include the following changes: - Change baudrate from 57600 to 115200 - Enable MIPS_BOOT_CMDLINE_LEGACY - Enable FIT support - Enable ethernet support - Enable SPI support - Enable GPIO support - Change max image size from 0x40000 to 0x80000 A note about the baudrate change: The original Mediatek U-Boot version used 57600 baud. Lets move to a more common and faster speed of 115200 baud. And remove the "console=" property from the DT as its not needed. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: linkit-smart-7688: Use ioremap_nocache to get addressStefan Roese
Use the correct function to get the uncached address to access the SoC registers. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: gardena-smart-gateway: Misc updates to dts/config/defconfigStefan Roese
These misc updates include the following changes: - Change baudrate from 57600 to 115200 - Enable MIPS_BOOT_CMDLINE_LEGACY - Enable FIT support - Enable ethernet support - Enable SPI NOR and NAND support - Change MTD_UBI_BEB_LIMIT to 22 - Enable MTD Support - Enable GPIO support - Enable watchdog support - Enable bootcounter support - Enable version variable - Change max image size from 0x80000 to 0xa0000 - Change SYS_MALLOC_LEN to 16MiB (because of UBI/UBIFS) Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: gardena-smart-gateway: Add board_late_init() to set LED def stateStefan Roese
This is needed to set the LEDs automatically to a default state, as configured in the dts. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: gardena-smart-gateway: Add LEDs to dtsStefan Roese
Add the available LEDs to the DTS file so that they can be used. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: gardena-smart-gateway: Configure GPIOs (digital vs analog)Stefan Roese
Configure digital vs analog GPIOs as needed on this board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: Enable watchdog supportStefan Roese
This patch enables and starts the watchdog on the MT7620 platform. Currently the WD timeout is configured to 60 seconds. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> [fixed build error due to missing function prototype arch_misc_init] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: Kconfig: Add ethernet and GPIO supportStefan Roese
Imply DM_ETH and DM_GPIO for ARCH_MT7620, as this platform now supports ethernet and GPIO as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: Add watchdog DT node to mt7628a.dtsiStefan Roese
Add the watchdog DT node to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: Add GPIO DT nodes to mt7628a.dtsiStefan Roese
Add the GPIO DT nodes to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: Add ethernet DT node to mt7628a.dtsiStefan Roese
Add the ethernet DT node to the DTS file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: lowlevel_init.S: Add missing memory controller reset in DDR initStefan Roese
This fixes an issue which has been noticed on the Gardena board, with the watchdog enabled, where the watdchdog reset (after a system hang) did result in reporting of 2.9 GiB and a hang after this. With this patch applied the memory controller is correctly reset and initialized again even after a watchdog reset. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18gpio: Add MT7621 GPIO supportStefan Roese
This patch adds GPIO support for the Mediatek MT7621 SoC, tested on MT7688 (Gardena smart-gateway). The driver is loosly based on the Linux kernel version. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> [fixed checkpatch.pl warnings: Prefer 'unsigned int' to bare use of 'unsigned'] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18wdt: Add MT7621 watchdog driverStefan Roese
This patch adds watchdog support for the Mediatek MT7621 SoC. The driver is loosly based on the Linux kernel version. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> [fixed merge conflict in drivers/watchdog/Kconfig] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-17Merge branch '2018-11-16-master-imports'Tom Rini
- Initial bcm968580xref, am65x_evm_r5 support - lpc32xx, omap3_logic/am3517_evm updates - pinctrl command - fs_loader available for SPL
2018-11-16sunxi: Update MAINTAINERS file for recent boardsTom Rini
Add entries for the pine64-lts and pinebook configs. Cc: Vasily Khoruzhick <anarsoul@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-16fdt_region: Ensure that depth never goes below -1Konrad Beckmann
A specially crafted FIT image makes it possible to overflow the stack with controlled values when using the verified boot feature. Depending on the memory layout, this could be used to overwrite configuration variables on the heap and setting them to 0, e.g. disable signature verification, thus bypassing it. This change fixes a bug in fdt_find_regions where the fdt structure is parsed. A lower value than -1 of depth can lead to a buffer underflow write on the stack. Signed-off-by: Konrad Beckmann <konrad.beckmann@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-16image-sig: Ensure that hashed-nodes is null-terminatedKonrad Beckmann
A specially crafted FIT image leads to memory corruption in the stack when using the verified boot feature. The function fit_config_check_sig has a logic error that makes it possible to write past the end of the stack allocated array node_inc. This could potentially be used to bypass the signature check when using verified boot. This change ensures that the number of strings is correct when counted. Signed-off-by: Konrad Beckmann <konrad.beckmann@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-16Ability to modify distro boot filenameMartyn Welch
Add in the ability to modify the distro boot filename. Whilst not immediately useful in normal usage, it allows an alternative configuration to be provided when other u-boot functionality is used, such as bootcount limit, to fallback to an alternative boot configuration. In this case we can follow the same boot path as for normal boot, just using an alternatively named configuration file. For example, by providing the following `altbootcmd` when bootcount is in use: altbootcmd=setenv boot_extlinx_conf extlinux-rollback.conf; \ run distro_bootcmd Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-11-16misc: fs_loader: Fix compiler warningKeerthy
Fix compiler warning drivers/misc/fs_loader.c:193:9: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t {aka long unsigned int}’ [-Wformat=] Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-16misc: fs_loader: Use device_get_global_by_ofnode to get to nodeKeerthy
Instead of two staged ofnode_to_offset followed by device_get_global_by_of_offset approach, direcly use the device_get_global_by_ofnode to fetch the device. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-16fs: Makefile: Add fs.c under SPL for fs_loaderKeerthy
Add fs.c under SPL as well as it is needed for fs_loader Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Add as obj-$(CONFIG_FS_LOADER) for non-SPL_FRAMEWORK builds] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-16serial: ns16550: add setconfig supportSimon Goldschmidt
Add possibility to update the serial parity used. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2018-11-16dm: serial: fix comment on dm_serial_ops setconfigSimon Goldschmidt
The comment on this function prototype describes nonexistent parameters. It seems to be copied from 'setparity'. Update it to match its the parameter list. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-16board: ti: am65x: Update README to add R5 build supportLokesh Vutla
Update the README file to add r5 build support and system firmware support. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2018-11-16configs: am65x_evm_r5: Add initial supportLokesh Vutla
Add initial defconfig support for AM65x that runs on R5. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
2018-11-16armv7r: dts: am654: Add initial supportLokesh Vutla
Add R5 specific dts for am654-evm. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: James Doublesin <doublesin@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-11-16arm: dts: k3: Sync dts from LinuxLokesh Vutla
Sync the k3-am654 specific dts files from Linux next with tag 20181019. This changes are in queue for Linux v4.20-rc1 Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-11-16board: ti: am654: r5: Add initial support for am654Lokesh Vutla
Add initial support for AM654 based EVM running on R5. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2018-11-16armv7R: K3: am654: Add support for triggering ddr init from SPLLokesh Vutla
In SPL, DDR should be made available by the end of board_init_f() so that apis in board_init_r() can use ddr. Adding support for triggering DDR initialization from board_init_f(). Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
generated by cgit (git 2.34.1) at 2024-12-27 00:17:55 +0000