summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-16mpc85xx: Add print_tlbcam() functionBecky Bruce
This dumps out the contents of TLB1 on 85xx-based systems. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-16mpc85xx: tlb.c cleanupsBecky Bruce
Extract the operation to read a tlb into a function - we will need this later to print out the tlbs, and there's no point in duplicating the code. Create a TSIZE_TO_BYTES macro to deal with the conversion from the MAS field to an actual size instead of duplicating this in code. There are a few misc other minor cleanups. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-1683xx/85xx/86xx: LBC register cleanupBecky Bruce
Currently, 83xx, 86xx, and 85xx have a lot of duplicated code dedicated to defining and manipulating the LBC registers. Merge this into a single spot. To do this, we have to decide on a common name for the data structure that holds the lbc registers - it will now be known as fsl_lbc_t, and we adopt a common name for the immap layouts that include the lbc - this was previously known as either im_lbc or lbus; use the former. In addition, create accessors for the BR/OR regs that use in/out_be32 and use those instead of the mismash of access methods currently in play. I have done a successful ppc build all and tested a board or two from each processor family. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-16powerpc: Update configs to properly set FSL_ELBCBecky Bruce
Some parts that have an Enhanced Local Bus Controller weren't setting CONFIG_FSL_ELBC. Fix this so we can use this define properly going forward (currently it's only used if PHYS_64BIT is set, which meant not all platforms needed to have it set correctly). Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-1685xx/p1_p2_rdb: enable hwconfigPoonam Aggrwal
Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-16Move ICS CLK chip frequency calculation code into a common board libraryKumar Gala
We have several boards that use the same ICS307 CLK chip to drive the System clock and DDR clock. Move the code into a common location so we share it. Convert the P2020DS board as the first to use the new common ICS307 code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Timur Tabi <timur@freescale.com>
2010-07-16ppc/85xx: Add a structure defn for PIXIS registersKumar Gala
The various boards that have PIXIS FPGAs have slightly different register definitions, however there is some common functionality (like reset, ICS307 clk control, etc) that can be shared. The struct definition exists for MPC8536DS, MPC8544DS, MPC8572DS, MPC8610HPCD, and MPC8641HPCN boards. Also fixed ngpixis to be __packed__ instead of aligned. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-16powerpc/8xxx: Add is_core_disabled to remove disabled cores from dtbKumar Gala
If we explicitly disabled a core remove it from the dtb we pass on to the kernel. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-16mpc8xxx: Remove cpu-handles for cpus we deleteKumar Gala
We may have cpu-handles pointing to the cpu nodes we delete. If so we should delete the handles as well. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-16powerpc/8xxx: Add base support for the SEC4Kim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-16powerpc/8xxx: Distinguish between incompatible SEC h/w typesKim Phillips
CONFIG_SYS_FSL_SEC_COMPAT is set to 2 for the SEC 2.x and SEC 3.x. Parts with newer SEC h/w versions will increment the number to accomodate incompatible code changes. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-16fdt: move fsl specific code from common fdt area to mpc8xxx/fdt.cKim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-15Merge branch 'master' of git://git.denx.de/u-boot-pxaWolfgang Denk
2010-07-15Merge branch 'master' of ../masterWolfgang Denk
2010-07-14PXA: ZipitZ2 supportMarek Vasut
This patch adds support for Aeronix Zipit Z2 handheld. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-14PXA: Toradex Colibri PXA270 supportMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-14PXA: Voipac PXA270 SupportMarek Vasut
This patch adds support for the Voipac PXA270 board. The support includes: - Ethernet - USB - MMC - NOR Booting - OneNAND Booting - LCD - HDD Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Scott Wood <scottwood@freescale.com>
2010-07-14PXA: Add support for LMS285GF05 into pxafbMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-14Voipac PXA270 LCD SupportMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-14PXA: Add OneNAND booting support to start.SMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-14PXA: Add PWM2 and PWM3 regs to pxa-regs.hMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-14PXA: Add hardware init helper macrosMarek Vasut
This patch adds macros for the following purposes: - GPIO configuration - SDRAM configuration - Wakeup - Clock configuration - Interrupt controller configuration These macros are intended to replace numerous copies of the same code. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-14Enable PXAFB for PXA27X and PXA3XXMarek Vasut
2010-07-14Merge branch 'next' of git://git.denx.de/u-boot-niosWolfgang Denk
2010-07-14Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk
2010-07-14Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk
2010-07-14Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk
2010-07-13Blackfin: bf561-acvilon: drop unused env redund defineMike Frysinger
The SPI env code didn't support redundant environments until recently, but this code was written before that. Since it has never been tested (and currently causes a build failure), simply punt it. If the functionality is actually desired, it can be re-added once it has been tested. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: drop old u-boot.lds clean targetMike Frysinger
The u-boot.lds CPP unification missed the Blackfin-specific clean target. It is no longer needed, so punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: bf527-ad7160-eval: new board supportMichael Hennerich
Support the new AD7160 eval board. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: enable IP defrag for ADI boardsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: bfin_mac: remove space from nameMike Frysinger
Some commands (like 'mii') use this name to select devices, but they break when those names contain spaces. So drop the space from the Blackfin EMAC driver. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: unify default I2C settings for ADI boardsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Heiko Schocher <hs@denx.de>
2010-07-13Blackfin: bf561: use DMA for Core B L1 regionsMike Frysinger
The L1 regions of Core B are not directly accessible from Core A, so we need to use DMA to get at them. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: cm-bf548: convert to portmux frameworkMike Frysinger
Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: bf527-ezkit: convert to portmux frameworkMike Frysinger
Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: bf548-ezkit: convert to portmux frameworkMike Frysinger
Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: bf518f-ezbrd: convert to portmux frameworkMike Frysinger
Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: bf518f-ezbrd: handle different PHYs dynamicallyMike Frysinger
The original BF518F-EZBRD's have a Micrel KSZ8893 DSA on them, but newer ones only have a National PHY (which lack a RX Error interrupt line). So in the board eth init code, dynamically detect what is hooked up to the MAC and handle each accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: bf533-stamp: scrub unused codeMike Frysinger
Much of the local bf533-stamp.h header is unused, and the few bits that are are only needed in one file. So move the few used bits out and punt all the rest. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: blackstamp: convert eth/flash swap logic to gpio frameworkMike Frysinger
Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: bf533-stamp: convert eth/flash swap logic to gpio frameworkMike Frysinger
Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: bfin_spi: support gpios as chip selectsMike Frysinger
Rather than only support the pins dedicated as chip selects, utilize the gpio framework to support any gpio pin. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: bfin_spi: convert to portmux frameworkMike Frysinger
Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: serial: convert to portmux frameworkMike Frysinger
Use the new portmux framework to handle the details when possible. Unfortunately, we cannot yet use this in the standalone initialization logic, so we need to keep around the old portmux writes for now. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: pata_bfin: convert to portmux frameworkMike Frysinger
Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: bfin_sdh: convert to portmux frameworkMike Frysinger
Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13Blackfin: bfin_nand: convert to portmux frameworkMike Frysinger
Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Scott Wood <scottwood@freescale.com>
2010-07-13Blackfin: bfin_mac: convert to portmux frameworkMike Frysinger
Rather than bang MMRs directly, use the new portmux framework to handle the details. While we're doing this, let boards declare the exact list of pins they need in case there is one or two they don't actually have hooked up. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
2010-07-12edminiv2: add ethernet supportAlbert Aribaud
Add edminiv2 board support for mv_egiga. Add edminiv2 config to enable mv_egiga. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-29 20:28:07 +0000