summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-29rockchip: rk3399: show SPL BANNER earlier in board_init_f()Kever Yang
Show the SPL BANNER earlier so that we know already get into SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move spl_perform_fixups() into soc fileKever Yang
Move the spl_perform_fixups() into rk3399.c so that we can use common spl board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3368: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3368: migrate to use common spl board fileKever Yang
rk3368 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: migrate to use common spl board fileKever Yang
rk3328 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: add STIMER_BASE definitionKever Yang
Add the CONFIG_ROCKCHIP_STIMER_BASE so that we can use the stimer init function in tpl.c and spl.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288-veyron: Migrate "u-boot, boot0" to "u-boot, spl-boot-order"Kever Yang
"u-boot,spl-boot-order" is more flexible and other rockchip SoCs has convert to use it, migrate to use the new dts property. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: phycore: remove no use "u-boot, boot0" in dtsKever Yang
We are using "u-boot,spl-boot-order" now and re-use the definition from rk3288-u-boot.dtsi, so remove it directly here. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: Migrate to use common spl board fileKever Yang
rk3288 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: move dram_init_banksize() into soc fileKever Yang
Mov edram_init_banksize() into rk3288.c so that we can re-use the common SPL board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288-phycore: move phycore_init() to its own board fileKever Yang
phycore_init() is use for phycore board only, it should be move back to phycore-rk3288.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: move setup_led() to firefly-rk3288Kever Yang
Only firefly-rk3288 has the dts node "u-boot,boot-led", while CONFIG_SPL_LED is not enable, move code to firefly-rk3288 now in case someone need this code. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: show SPL BANNER earlier in board_init_f()Kever Yang
Show the SPL BANNER earlier so that we know already get into SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: fit_spl_optee: rockchip: fix warning unit_address_vs_regKever Yang
Update to fix warning: u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/optee@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /configurations/conf@1 has a unit name, but no reg property Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: migrate to use common spl board fileKever Yang
rk322x has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: introduce arch_cpu_init() for SoC setting initKever Yang
Use arch_cpu_init() to init SoC secure region and move it to rk322x.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: migrate to use common spl board fileKever Yang
rk3188 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: move spl_board_init() into rk3188.cKever Yang
Clean up the rk3188.c so that we can re-use the common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: Migrate to use BOOTROM_SUPPORT driverKever Yang
SPL bootrom support is a boot device just like mmc and etc, use formal boot device instead of jump to bootrom directly. Enable the Kconfig by default if ROCKCHIP_BACK_TO_BROM is enabled. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: move usb uart init into arch_cpu_init()Kever Yang
The SoC feature init will be better to use arch_cpu_init() and goes to soc file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: init CPU freq in clock driverKever Yang
Init CPU frquency in clock driver instead of in SPL board file, this will help for use common board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: add common spl board fileKever Yang
The common spl board file handles board_init_f() in SPL, and with board_early_init_f() and arch_cpu_init() callback, other operateion after board_init_f() should go to board specific spl_board_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29video: dw_hdmi: Add support for ddc-i2c-bus propertyNiklas Schulze
Add support for the ddc-i2c-bus device tree property which allows for using an external i2c master for reading the display's EDID. Signed-off-by: Niklas Schulze <me@jns.io>
2019-07-29video: meson: dw-hdmi: add EDID mode filtering to only select supported modesNeil Armstrong
Add support for the new mode_valid() display op to filter out unsupported display DMT timings. This is useful when connected to 4k displays, since we only support DMT monitors up to 1920x1080, the 4k native timings are discarded to select supported timings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-29video: display: use edid_get_timing_validate() variant to filter supported ↵Neil Armstrong
EDID modes Introduce a new display op, mode_valid() to be used with the newly introduced edid_get_timing_validate() function, to filter supported monitor timings if handled by the display driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-29edid: add edid_get_timing_validate() variant to filter out edid modesNeil Armstrong
The original edid_get_timing() function returns the first valid timing, but on some plaforms, we could only supports a subset of the listed monitot's navite timing. Let's introduce a edid_get_timing_validate() adding a mode_valid callback including a private cookie pointer. If the callback returns false, the current timing is discared and the next one is checked. If no valid & supported timings are found, the function would return an error. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-29bmp_logo: support CONFIG_DM_VIDEOHeiko Schocher
in case of bmp_logo, the video_bmp driver is used for drawing a bmp logo. This driver supports only "full" bmp data. Adding a logo with the bmp_logo tool to u-boot binary adds currently only real data and drops the bmp header. This patch adds now the full bmp data to the u-boot binary, so video_bmp driver works with the logo embedded into u-boot. Fixed also some checkpatch error poping up with this patch. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29video, simple_panel: add lg,lb070wv8 displayHeiko Schocher
add "lg,lb070wv8" display to compatible node. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-29configs: colibri-imx6ull: switch to DM_VIDEOIgor Opaniuk
Use CONFIG_DM_VIDEO=y by default for Colibri iMX6ULL. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29ARM: dts: colibri-imx6ull: extend lcdif nodeIgor Opaniuk
Provide proper display timings for lcdif node, used by mxsfb DM_VIDEO enabled framebuffer driver. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29colibri-imx6ull: support building with DM_VIDEO=yIgor Opaniuk
1. This fixes linking issues when building with DM_VIDEO enabled mxsfb driver. 2. Provide proper defines for both VIDEO=y and DM_VIDEO=y. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29configs: colibri_imx7: enable DM_VIDEOIgor Opaniuk
Enable DM_VIDEO support for Colibri iMX7 NAND version. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29ARM: dts: colibri_imx7: Fix lcdif node definitionIgor Opaniuk
Fix lcdif DT node and make it conform to the structure defined in the Linux devicetree bindings [1]. Currently there is support only for old style lcdif node definitions. [1] https://www.kernel.org/doc/Documentation/devicetree/bindings/display/mxsfb.txt Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29video: mxsfb: fix mxsfb fbdev binding issuesIgor Opaniuk
Add support for display and bits-per-pixel properties. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29colibri_vf: enable DM_VIDEOIgor Opaniuk
Enable DM_VIDEO for Colibri VF. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29ARM: dts: colibri_vf: Add dcu0 nodeIgor Opaniuk
Add dumb node for NXP Display Control Unit0(DCU), which permits DM_ENABLED converted driver to be probed. Currently no display timings are provided in this node. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29video: fsl_dcu_fb: add DM_VIDEO supportIgor Opaniuk
Extend the driver to build with DM_VIDEO enabled. DTS files must additionally include 'u-boot,dm-pre-reloc' property in soc and child nodes to enable driver binding to fsl_dcu_fb device. Currently display timings aren't obtained from DT. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29video: fsl_dcu_fb: refactor init functionsIgor Opaniuk
Move dcu-related code to fsl_dcu_probe_common, keep in video_hw_init() only legacy video stack (filling GraphicPanel struct etc.). Add wrappers for all init functions, that will let to provide struct fb_info as an additional param (needed for further moving it from the global scope to driver private data struct in DM converted driver). Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-27Merge branch '2019-07-26-ti-imports'Tom Rini
- Bring in the rest of the J271E platform - Various OMAP3/AM3517, DA850 fixes
2019-07-27env: ti: boot: Use ttyS2 instead of ttyO2Sam Protsenko
ttyO2 console enables legacy CONFIG_SERIAL_OMAP driver in kernel. Nowadays it's preferred to use the generic CONFIG_SERIAL_8250_OMAP driver, which being enabled via ttyS2 console. Both drivers are enabled in multi_v7_defconfig and in omap2plus_defconfig, for compatibility reasons. Let's switch to ttyS2 console, to be sure that standard 8250 serial driver is used. Similar behavior can be also achieved by enabling CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP option in kernel, but it's better not to rely on that, as it can be disabled or removed after transitional period. Right now on DRA7/AM57x platforms the 8250-omap driver is being probed first, and omap-serial driver is only probed if the first one failed. It can be seen from uart3 definition in arch/arm/boot/dts/dra7-l4.dtsi: compatible = "ti,dra742-uart", "ti,omap4-uart"; So the kernel already uses 8250 driver. This change basically allows kernel developers to throw away the omap-serial driver and associated compatibility options. Similar discussions [1,2] have started several years ago, so it should be safe to do that now. [1] https://patchwork.kernel.org/patch/6198471/ [2] http://processors.wiki.ti.com/index.php/Sitara_Linux_UART_-_Switching_to_8250_Driver Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Andrew F. Davis <afd@ti.com> [trini: Update omap5_uevm] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-27arm: am57xx: Allow bootm to load larger kernelsSam Protsenko
linux-mainline with multi_v7_defconfig + Android configs takes more space than regular TI Android kernel and bootm will fail to load it. Let's increase max kernel size up to 64 MiB to make it possible to run such kernel. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-27ARM: da850-evm: Remove dead/unneeded codeAdam Ford
The DA8850-evm supports DM_I2C and boots with SPL_DM, so we can drop some of the code which disables DM_I2C in SPL. This patch removes some #undef's now rendered obsolete. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27ARM: omap3/omap35_logic: Fix broken Logic PD Torpedo bootingAdam Ford
The SOM-LV and Torpedo boards are very similar, but something happened growing SPL enough to break the Torpedo. The SOM-LV board were not doing alias sequencing during SPL and they continue to work while something broke the Torpedo. This patch disables SPL_DM_SEQ_ALIAS allowing it to boot again. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTSAdam Ford
Re-sync all Logic PD OMAP35 and AM/DM37 boards with Kernel 5.2.1 Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27ARM: da850evm: Remove legacy OHCI referencs and unify platformAdam Ford
OHCI was added with DM_USB support, so there are a few unneeded items in the header file that can be removed. This also unifies da850evm with NOR and NAND booting options so all have OHCI support. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate da850_am18xxevm] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-27ARM: am3517_evm: Fix pin muxing to enable EHCI Host in the futureAdam Ford
This patch enables the pinmuxing to support gpio_57 for phy reset and fixes the pinmuxing for the ECHI tranceiver. The clocks don't appear to by fully enabled yet, so OMAP-EHCI on am3517 is still not yet working, but we're one step closer. Signed-off-by: Adam Ford <aford173@gmail.com>
generated by cgit (git 2.34.1) at 2025-01-13 03:32:56 +0000