summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-28w1: add command for onewire protocolEugen Hristev
Add basic command for bus information and read for onewire bus using Dallas 1-Wire protocol. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28dt-bindings: w1-eeprom: eep_sandbox: create bindingsEugen Hristev
Bindings for sandbox onewire eeprom driver Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28W1-EEPROM: add sandbox driverEugen Hristev
Add a sandbox driver for a one wire EEPROM memory Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28dt-bindings: w1-eeprom: ds24xxx: create bindingsEugen Hristev
Bindings for Maxim's ds24 onewire EEPROM families driver Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28W1-EEPROM: add support for Maxim DS24 eeprom familiesMaxime Ripard
Add a driver that supports Maxim 1 wire EEPROMs families DS24B33 and DS2431. Can be extended for other families as well. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [eugen.hristev@microchip.com: reworked driver] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28w1: identify devices with w1-eeprom uclassEugen Hristev
When a new device is discovered, this may be a w1 eeprom device. Attempt to find the proper node and driver from the w1-eeprom subsystem. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMsMaxime Ripard
We might want to access data stored onto one wire EEPROMs. Create a framework to provide a consistent API. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [eugen.hristev@microchip.com: reworked patch] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28dt-bindings: W1: w1-gpio: added bindings for w1-gpioEugen Hristev
Added bindings specification for bitbanged gpio driver for Dallas one wire protocol Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28w1: Add 1-Wire gpio driverMaxime Ripard
Add a bus driver for bitbanging a 1-Wire bus over a GPIO. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [eugen.hristev@microchip.com: fixed some issues] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28w1: Add 1-Wire uclassMaxime Ripard
We might want to use 1-Wire devices connected on boards such as EEPROMs in U-Boot. Provide a framework to be able to do that. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [eugen.hristev@microchip.com: reworked] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28common: Generic loader for file systemTien Fong Chee
This is file system generic loader which can be used to load the file image from the storage into target such as memory. The consumer driver would then use this loader to program whatever, ie. the FPGA device. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2018-09-28doc: dtbinding: Add file system firmware loader binding documentTien Fong Chee
Add a document to describe file system firmware loader binding information. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-28doc: Add new doc for file system firmware loader driver modelTien Fong Chee
Provide information about - overview of file system firmware loader driver model - describe storage device and partition in device tree source - describe fie system firmware loader API Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-28block: Add a function to find block device descriptorTien Fong Chee
Add a function to find the block device descriptor of the parent device. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> [trini: Move function declaration to avoid warning] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-28cmd: ubifs: Factor out some checking codes into cmd_ubifs_mount()Tien Fong Chee
cmd_ubifs_mount() function would be called directly instead of involving whole command machinery for mounting ubifs in generic firmware loader, so some checking codes need to be factored out into cmd_ubifs_mount() without breaking original functionality design. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-09-28cmd: ubifs: Move ubifs_initialized checking into cmd_ubifs_umount()Tien Fong Chee
cmd_ubifs_umount() function would be called directly instead of involving whole command machinery in generic firmware loader, so checking on ubifs_initialized status need to be done in cmd_ubifs_umount() without breaking original functionality design. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Fix conflicting type error in cmd/ubi.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-28video: Add support for Arm's Mali Display ProcessorsLiviu Dudau
Add support for Arm Mali Display Processors DP500, DP550 and DP650. Only one layer is being used to display the console or boot logo, even if more layers are supported in the hardware. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28video: Add support for NXP's TDA19988 HDMI encoderLiviu Dudau
Add support for the NXP TDA19988 HDMI encoder as used on the Juno development board from Arm. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A23/A33/r16 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commits. A23: commit bc3bd041fe766219a44688b182c260064007f0cc Author: Miquel Raynal <miquel.raynal@bootlin.com> Date: Tue Apr 24 17:55:02 2018 +0200 ARM: dts: sun8i: a23/a33: declare NAND pins A33: commit 88fe315d2c0a397ef42d7639addab0e021ae911d Author: Maxime Ripard <maxime.ripard@bootlin.com> Date: Wed Apr 4 11:57:15 2018 +0200 ARM: dts: sun8i: a33: Add the DSI-related nodes r16: commit 9621d0bd1b0d61167e1853ac68cf4869c31bcc96 Author: Miquel Raynal <miquel.raynal@bootlin.com> Date: Tue Apr 24 17:55:03 2018 +0200 ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support Note: - Drop pinctrl from sun8i-r16-nintendo-nes-classic-edition.dts since sun8i-a23-a33.dtsi is added with Linux sync. - Don't sync non U-Boot supported dts files sun8i-a23-ippo-q8h-v1.2.dts sun8i-a23-ippo-q8h-v5.dts sun8i-a33-et-q8-v1.6.dts sun8i-a33-ippo-q8h-v1.2.dts sun8i-r16-nintendo-nes-classic.dts sun8i-r16-nintendo-super-nes-classic.dts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-09-28ARM: dts: sun7i: Update A20 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 5d9ef839f874f4e3923c8a9ae7b136c6c3912cd5 Author: Stefan Mavrodiev <stefan@olimex.com> Date: Wed May 16 14:38:08 2018 +0300 ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board Note: - Update sun7i-a20-primo73.dts as per Linux, since this dts is U-Boot specific. - Drop sun7i-a20-olimex-som-evb-emmc.dts since no board added for this. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-09-28ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A31/A31s devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit b240b419db5d624ce7a5a397d6f62a1a686009ec Merge: 9c2dd8405c0c 518d2f43c358 Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Thu Apr 5 21:18:09 2018 -0700 Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-09-28ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A10s/A13/gr8/r8devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 190e3138f9577885691540dca59c2f07540bde04 Merge: cafc87023b0d a7affb13b271 Author: Arnd Bergmann <arnd@arndb.de> Date: Tue Mar 27 14:58:00 2018 +0200 Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-09-28ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 590b0c0cfc6162aeebbf43eaafb9753b56df1532 Author: Pascal Roeleven <dev@pascalroeleven.nl> Date: Fri Apr 20 12:21:12 2018 +0200 ARM: dts: sun4i: Fix incorrect clocks for displays Note: Update pinctrl-0 for sun4i-a10-inet-3f.dts, sun4i-a10-inet-3w.dts like other dts file since there dts file are U-Boot specific. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-09-28include/video.h: Remove declaration of functions that don't exist.Liviu Dudau
video_init, video_putc and video_puts functions are not implemented anywhere, remove their declaration from the header. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-09-28video: cfb_console: flush cache in display_rle8_bitmapSébastien Szymanski
Otherwise BMP RLE8 images are not properly displayed. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2018-09-28cmd: Add osd commandsMario Six
Add command to query information from and write text to on-screen display (OSD) devices. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-28test: list: Add tests for hexdump.cMario Six
Add tests for the hex2bin, bin2hex, and hex_to_bin functions, which were recently added to U-Boot. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-28test: Add ut_asserteq_memMario Six
Add a unit test assert-method, which compares two given memory areas for byte-wise equality. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-28video_osd: Add osd sandbox driver and testsMario Six
Add sandbox driver and tests for the new OSD uclass. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-28video_osd: Add ihs_video_out driverMario Six
Add a driver for IHS OSDs on IHS FPGAs. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-28drivers: Add OSD uclassMario Six
Some devices offer a text-based OSD (on-screen display) that can be programmatically controlled (i.e. text displayed on). Add a uclass to support such devices. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-28dm: video: support more escape sequencesHeinrich Schuchardt
The EFI subsystems needs to know the size of the terminal. If the environment variable stdout = serial,vidconsole this size cannot be read from the video console. So the EFI subsystem sends escape sequences to read the size. With this patch we get support for the following escape sequences: ESC "7" Save cursor position ESC "8" Restore cursor position Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-09-28dm: video: adjust struct vidconsole_priv descriptionHeinrich Schuchardt
The third component of struct vidconsole_priv is ycur. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-09-28MAINTAINERS: assign include/video*.hHeinrich Schuchardt
The include/video*.h files are part of the drivers in drivers/video. So it makes sense to assign them to the same maintainer. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-27powerpc: dts: Enable device tree support for T2080QDSJagdish Gediya
Add device tree for T2080QDS board and enable CONFIG_OF_CONTROL so that device tree can be compiled. Update board README for device tree usage. Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27powerpc: dts: Add u-boot.dtsi to use binman for MPC85xx boardsJagdish Gediya
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27powerpc: mpc85xx: Use binman to embed dtb inside U-BootJagdish Gediya
Below is the sequence to embed dtb inside U-Boot, 1. Remove bootpg and resetvec section if needed 2. Append dtb 3. Append bootpg and resetvec section back if removed in step 1 Above procedure is required only when CONFIG_MPC85xx and CONFIG_OF_SEPARATE are defined. Add new config CONFIG_MPC85XX_HAVE_RESET_VECTOR to indicate that image has resetvec section. Step 1 and step 3 described above are required only if this config is y. Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27powerpc: mpc85xx: Select BINMAN by defaultJagdish Gediya
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27binman: Add support for PowerPC mpc85xx 'bootpg + resetvec' entryJagdish Gediya
This entry contains the PowerPC mpc85xx boot page and resetvec sections. Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27binman: Add a new "skip-at-start" property in Section classJagdish Gediya
Currently binman calculates '_skip_at_start' based on 'end-at-4gb' property and it is used for x86 images. For PowerPC mpc85xx based CPU, CONFIG_SYS_TEXT_BASE is the entry offset of the first entry. It can be 0xeff40000 or 0xfff40000 for nor flash boot, 0x201000 for sd boot etc, so "_skip_at_start" should be set to CONFIG_SYS_TEXT_BASE. 'end-at-4gb' property is not applicable where CONFIG_SYS_TEXT_BASE + Image size != 4gb. Add new property 'skip-at-start' in Section class so that '_skip_at_start' can be calculated either based on 'end-at-4gb' or based on "skip-at-start". Add a test case to check that 'skip-at-start' and 'end-at-4gb' property can't be used together. Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27powerpc/dts: Makefile changes to clean and build dtsJagdish Gediya
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27powerpc/dts: Define '_end' symbol in mpc85xx U-Boot lds filesJagdish Gediya
'board_fdt_blob_setup' function sets up fdt blob at '&_end' so define '_end' symbol in mpc85xx lds files. Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27armv7: ls102xa: Disable QE before enter deep sleepRan Wang
Otherwise system will hang after executing wfi. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27drivers: qe: Move CONFIG_U_QE to KconfigRan Wang
Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [York S: revised subject line and removed commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27net: fman: Support both new and legacy FMan CompatiblesZhao Qiang
Recently the FMan Port and MAC compatibles were changed. This patch aligns the FMan Port and MAC compatibles to the new FMan device tree binding document. The FMan device tree binding document can be found in the Linux kernel version 3.18.0, commit 297d35fd2a7d3fbd4e5c0f0c1c18213117ba11ba ./Documentation/devicetree/bindings/powerpc/fsl/fman.txt This patch doesn't affect legacy compatibles support. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> [York S: reformatted commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27ls2080ardb: remove dhcp function from env as boot sourcePriyanka Jain
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27ls1088a: remove dhcp function from u-boot env as boot sourcePramod Kumar
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27ls1012a: remove debug info from u-boot logPramod Kumar
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27armv8: ls1043a: enable icid setup for qman portalsLaurentiu Tudor
Enable support for ICID setup of qman portals and the required device tree fixups. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27armv8: ls1043a: add icid setup supportLaurentiu Tudor
Reuse the existing ICID setup code done for LS1046A smmu enablement and add the equivalent setup for LS1043A chips. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-24 01:38:19 +0000