summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-03rsa: use new openssl API to create signaturePhilippe Reynes
Previous implementation of the rsa signature was using the openssl API EVP_Sign*, but the new openssl API EVP_DigestSign* is more flexible. So we move to this new API. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03rtc: m41t62: Convert the RTC driver to support the driver model (DM)Lukasz Majewski
After this change the m41t62.c can be used with RTC subsystem (i.e. date command) which uses device model (DM). Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2018-12-03rtc: m41t62: Extract common RTC handling code to facilitate DM conversionLukasz Majewski
This change facilitates the conversion of m41t62 RTC driver to device model (DM). Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2018-12-03rtc: m41t62: Break i2c_write() arguments to fix checkpatch warningLukasz Majewski
No functional change for this commit. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2018-12-03Kconfig: Migrate CONFIG_RTC_M41T62 define to KconfigLukasz Majewski
This patch moves the RTC M41T62 config define to Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03eeprom: Add device model based I2C support to eeprom commandLukasz Majewski
After this change the 'eeprom' command can be used with DM aware boards. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-12-03arm: baltos: migrate Ethernet PHYs configuration to KconfigYegor Yefremov
Remove CONFIG_PHY_ATHEROS and CONFIG_PHY_SMSC from defconfig and select them in Kconfig. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03arm: baltos: move CONFIG_SYS_NAND_U_BOOT_OFFS to defconfigYegor Yefremov
Also get rid of CONFIG_SYS_NAND_SPL_KERNEL_OFFS as SPL_OS_BOOT feature won't be used. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03arm: baltos: remove unused headerYegor Yefremov
OnRISC Baltos series uses SoM with tps65910 PMIC, so remove "power/tps65217.h" header inclusion. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03arm: baltos: move the board to CONFIG_BLKYegor Yefremov
Use DM for both MMC and USB subsystems and use dedicated DTS for U-Boot configuration. Disable SPL support for GPIO and remove EVMSK leftover for DDR power control via GPIO. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03net: zynq_gem: Add check for 64-bit dma support by hardwareSiva Durga Prasad Paladugu
This patch throws an error if 64-bit support is expected but DMA hardware is not capable of 64-bit support. It also prints a debug message if DMA is capable of 64-bit but not using it. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2018-12-03net: zynq_gem: Added 64-bit addressing supportVipul Kumar
This patch adds 64-bit addressing support for zynq gem. This means it can perform send and receive operations on 64-bit address buffers. Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2018-12-03arm64: zynqmp: Add new header file for zcu104 RevCT Karthik Reddy
Created a new header file for zcu104 RevC board and added below configurations to use MAC address from EEPROM. CONFIG_ZYNQ_GEM_EEPROM_ADDR CONFIG_ZYNQ_EEPROM_BUS Added CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 to xilinx_zynqmp_zcu104_revC_defconfig Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-12-03Merge tag 'u-boot-amlogic-20181203' of git://git.denx.de/u-boot-amlogicTom Rini
ARM: meson: Add regmap support for clock driver and sync DT with 4.19
2018-12-03ARM: meson: Add regmap support for clock driverLoic Devulder
This patch modifies the meson clock driver to use syscon/regmap like the Linux kernel does, as it is needed if we want to share the same DTS files. DTS files are synchronized from Linux 4.19. Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-12-03Merge tag 'arc-updates-for-2019.01-rc1' of git://git.denx.de/u-boot-arcTom Rini
We introduce much better automatic identification of ARC cores. 1. Try to match found HW features to known ARC core templates 2. Print CPU frequency for all ARC boards 3. Add more board-specific info
2018-12-03ARM: rmobile: Enable MMC HS400 on Salvator-X, ULCB, EbisuMarek Vasut
Enable the HS400 support code on H3, M3W, M3N Salvator-X(S) and ULCB boards as well as E3 Ebisu board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-03ARM: dts: rmobile: Enable HS400 on Salvator-X, ULCB, EbisuMarek Vasut
Enable the HS400 support in DT on H3, M3W, M3N Salvator-X(S) and ULCB boards as well as E3 Ebisu board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-03ARM: dts: rmobile: Enable SDR modes on E3 EbisuMarek Vasut
Add regulators and pinmuxes for SDHI0 and SDHI1 SD and microSD slots on E3 Ebisu and mark them as capable of up to SDR104 mode of operation. With the SDHI fixes in place, it is now possible to use SDR104. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-03ARM: dts: rmobile: Enable SDR104 on Salvator-X and ULCBMarek Vasut
Enable SDR104 modes on M3W and H3 boards. With the SDHI fixes in place, it is now possible to use SDR104. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-03ARM: dts: rmobile: Add eMMC DS pinmuxMarek Vasut
Add pinmux entry for the eMMC DS line, as it is connected on these boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-03mmc: tmio: sdhi: Add HS400 supportMarek Vasut
Add support for the HS400 mode to SDHI driver. This uses the up-tune mechanism from already supported HS200 tuning. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-03mmc: tmio: sdhi: Move tap_pos to private dataMarek Vasut
Move the tap_pos variable, which is the HS200/HS400/SDR104 calibration offset, into private data, so it can be passed around. This is done in preparation for the HS400 mode, which needs to adjust this value. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-03mmc: tmio: sdhi: Filter out HS400 on certain SoCsMarek Vasut
Filter out HS400 support on SoCs where HS400 is not supported yet. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-03mmc: tmio: Reorder TMIO clock handlingMarek Vasut
Reorder the tmio_sd_set_clk_rate() function such that it handles all of the clock requiests correctly. Specifically, before this patch, clock request with (mmc->clock == 0 && mmc->clk_disable) could leave the clock enabled, as the function would exit on if (!mmc->clock) condition on top and will not handle the mmc->clk_disable at all. Rather than band-aid fixing just that particular problem, reorder the entire function to make it easier to understand and verify that all the cases are covered. The function has three sections now: First, if mmc->clock != 0, we calculate divider for the SD block. Second, if mmc->clock != 0 and SD block clock are enabled and current divider is not equal to the new divider, then stop the clock and update the divider. Third, if mmc->clk_disable is set, disable the clock, otherwise enable the clock. This happens independently of divider update now. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-03mmc: tmio: Keep generating clock when clock are enabledMarek Vasut
The TMIO core has a feature where it can automatically disable clock output when the bus is not in use. While this is useful, it also interferes with switching the bus to 1.8V and other background tasks of the SD/MMC cards, which require clock to be enabled. This patch respects the mmc->clk_disable and only disables the clock when the MMC core requests it. Otherwise the clock are continuously generated on the bus. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-03mmc: tmio: Do not set divider to 1 in DDR modeMarek Vasut
The TMIO core has a quirk where divider == 1 must not be set in DDR modes. Handle this by setting divider to 2, as suggested in the documentation. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-03mmc: tmio: Switch to clock frameworkMarek Vasut
Switch the driver to using clk_get_rate()/clk_set_rate() instead of caching the mclk frequency in it's private data. This is required on the SDHI variant of the controller, where the upstream mclk need to be adjusted when using UHS modes. Platforms which do not support clock framework or do not support it in eg. SPL default to 100 MHz clock. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> --- V2: - Fix build on certain platforms using SPL without clock framework V3: - Turn clk_get_rate into a callback and fill it as needed on both renesas and socionext platforms
2018-12-03mmc: Parse HS400 DT propertiesMarek Vasut
Add HS400 properties parsing support to mmc_of_parse(). Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org>
2018-12-03clk: renesas: Allow reconfiguring SDHI clock on Gen3Marek Vasut
The SDHI clock must be configured differently for HS200/HS400/SDR104 modes. Add support for reconfiguring the SDHI clock settings into the clock driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-03arc: devboards: Implement checkboard()Alexey Brodkin
This allows us to print nice board name on boot. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-12-03arc: emsdp: Refactor register and bit accessesAlexey Brodkin
Instead of "base + offset" define all registers right away and access them later via direct defines. Generate bit masks with "BIT" macro. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-12-03arc: emsdp: Read real CPU clock value from hardwareAlexey Brodkin
We do real CPU clock measurement with help of built-in counters. Thus we may accommodate different real clock values that appear in different FPA images instead of relying on something hard-coded in the .dtb. And while at it make make SDIO base address define look similar to others with casting to "(void *)". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-12-03arc: Get rid of board-specific print_cpuinfo()Alexey Brodkin
Since we now do advanced CPU identification in generic ARC code there's no need to have per-board hardcoded data. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-12-03ARC: Improve identification of ARC coresAlexey Brodkin
1. Try to guess a ARC core template that was used i.e. not just name a core family but something more menaingful like "ARC HS38", "ARC EM11D" etc. We do it checking availability of the key differentiation features like: - Caches (we actually only check for L1 I$ fpr simplicity) - XY-memory - DSP extensions etc. 2. Identify ARC subsystems 3. Print core clock frequency Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-12-03arc: emsdp: Bump RAM size to 16 MbAlexey Brodkin
On v2 boards that will hit real stock we'll have 16 Mb of RAM. Note on v1 boards (if anybody ever get one out of trash bin) this leads to U-Boot execution freeze in the middle ofthe relocation so don't be surprised. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-12-03efi_loader: bootmgr: add load option helper functionsAKASHI Takahiro
In this patch, helper functions for an load option variable (BootXXXX) are added: * efi_deserialize_load_option(): parse a string into load_option data (renamed from parse_load_option and exported) * efi_serialize_load_option(): convert load_option data into a string Those functions will be used to implement efishell command. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-03efi_loader: allow device == NULL in efi_dp_from_name()AKASHI Takahiro
This is a preparatory patch for use in efi_serialize_load_option() as a load option's file_path should have both a device path and a file path. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02ARM: rpi_*_defconfig: Add support to find UUID for filesystemOtavio Salvador
The most generic way of having a stable boot behavior is to rely on UUID instead of device names for root partition, so the order of probing does not cause issues with booting. This enables the `CMD_FS_UUID` for following defconfig files: - rpi_0_w_defconfig - rpi_2_defconfig - rpi_3_32b_defconfig - rpi_3_defconfig - rpi_defconfig Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02rpi: Add mmc 1 as a boot targetEmmanuel Vadot
When booting with the rpi-firmware "mmc" overlay that disable the SDHOST controller and use the SDHCI one for the sd card, mmc 1 because a viable boot target. Add it to the list Signed-off-by: Oleksandr Tymoshenko <gonzo@FreeBSD.org> Signed-off-by: Emmanuel Vadot <manu@freebsd.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02doc: README.iscsi: Open-iSCSI configurationHeinrich Schuchardt
Provide settings for Open-iSCSI Reformat headers. h3-headers marked with ^^^ are not recognized in some markup editors. Use the ### notation instead. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02efi_loader: Align runtime section to 64kbAlexander Graf
The UEFI spec mandates that runtime sections are 64kb aligned to enable support for 64kb page size OSs. This patch ensures that we extend the runtime section to 64kb to be spec compliant. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02efi_selftest: rename setup_okHeinrich Schuchardt
The variable name setup_ok might suggest a boolean with true indicating OK. Let's avoid the misleading name. %s/setup_ok/setup_status/g Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02efi_loader: fix simple network protocolHeinrich Schuchardt
We should not call eth_rx() before the network interface is initialized. The services of the simple network protocol should check the state of the network adapter. Add and correct comments. Without this patch i.mx6 system Wandboard Quad rev B1 fails to execute bootefi selftest. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02efi_loader: correctly aligned transmit bufferHeinrich Schuchardt
Calling net_send_packet() requires that the buffer is aligned to a multiple of PKTALIGN (= ARCH_DMA_MINALIGN). The UEFI spec does not require efi_net_transmit() to be called with a buffer with any special alignment. So we have to copy to an aligned buffer. The current coding copies to an aligned buffer only if CONFIG_EFI_LOADER_BOUNCE_BUFFER=y. Many boards like the Odroid C2 do not use a bounce buffer. With the patch we copy to a correctly aligned buffer in all cases. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02efi_selftest: fix simple network protocol testHeinrich Schuchardt
To use the simple network protocol we have to call the start service first and the initialize service second. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02MAINTAINERS: add EFI PAYLOAD reviewerHeinrich Schuchardt
Alex suggested to add me as a reviewer for the EFI subsystem. The patch also adds a description for R: entries. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02efi_selftest: check fdt is marked as runtime dataHeinrich Schuchardt
Check that the memory area containing the device tree is marked as runtime data. Update the Python test to pass ${fdtcontroladdr} to bootefi. Update the description of the Python test. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02efi_loader: create fdt reservation before copyHeinrich Schuchardt
When copying the device we must ensure that the copy does not fall into a memory area reserved by the same. So let's change the sequence: first create memory reservations and then copy the device tree. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02efi_loader: fix memory mapping for sandboxHeinrich Schuchardt
The sandbox is using a virtual address space which is neither the physical address space of the operating system nor the virtual address space in which Linux aplications live. The addresses used insided the flattened device tree use this sandbox virtual address space. The EFI subsystem uses the virtual address space of the operating system and this is where the fdt is stored. Fix all incorrect addresses for the fdt in cmd/bootefi.cmd. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit (git 2.34.1) at 2025-01-08 18:31:01 +0000