summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-08common: env_sf: Use CONFIG_SF_DEFAULT_xxx as the default value for ↵Jean-Jacques Hiblot
CONFIG_ENV_SPI_xxx The default values for the configuration defines CONFIG_ENV_SPI_xxx are arbitrary values. It makes more sense to set them to the values used by the sf command. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-02-08pcm052: fix DDR initialization sequenceAlbert ARIBAUD \(3ADEV\)
The sequence erroneously launched the DDR controller initialization before the pad muxing was done, causing DRAM size computation to hang. Configuring the pads first then launching DDR controller initialization prevents the DRAM hanging. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2017-02-08drivers: net: cpsw: Fix reading of mac address for am43 SoCsLokesh Vutla
cpsw driver tries to get macid for am43xx SoCs using the compatible ti,am4372. But not all variants of am43x uses this complatible like epos evm uses ti,am438x. So use a generic compatible ti,am43 to get macid for all am43 based platforms. Tested-by: Aparna Balasubramanian <aparnab@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-02-08cmd: bootm: fix build when CONFIG_CMD_IMLS_NANDGrygorii Strashko
Now when CONFIG_CMD_IMLS_NAND is enabled the u-boot build will fail, because nand_read_skip_bad() function has been changed to accept more parameters, hence fix it. CC cmd/bootm.o cmd/bootm.c: In function 'nand_imls_legacyimage': cmd/bootm.c:390:8: error: too few arguments to function 'nand_read_skip_bad' ret = nand_read_skip_bad(mtd, off, &len, imgdata); ^ In file included from cmd/bootm.c:18:0: include/nand.h:101:5: note: declared here int nand_read_skip_bad(struct mtd_info *mtd, loff_t offset, size_t *length, ^ LD drivers/block/built-in.o Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08checkpatch: Port spelling to checkpatchDan Murphy
Pick commit 66b47b4a9dad0 checkpatch: look for common misspellings from the Linux kernel for spelling check from Kees Cook In addition pulled in additional changes commit ebfd7d6237531 checkpatch: add optional --codespell dictionary to find more typos from the Linux kernel for codespell from Joe Perches commit f1a63678554f8 checkpatch: remove local from codespell path from the Linux kernel for dictionary path from Maxim Uvarov Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-02-08api: Convert to KconfigEmmanuel Vadot
Now that we have a Kconfig for the API, convert the two boards that are using this to Kconfig and remove CONFIG_API from the whitelist. Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08kconfig: Add API kconfig fileEmmanuel Vadot
Add kconfig file to enable API support Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08kbuild: beautify the log of config whitelist checkMasahiro Yamada
Use the kbuild style log. Prior to this commit: ./scripts/check-config.sh u-boot.cfg \ ./scripts/config_whitelist.txt . 1>&2 With this commit: CFGCHK u-boot.cfg Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08ARM: dts: k2*: Rename the k2* files to keystone-k2* filesLokesh Vutla
As reported in [1], rename the k2* dts files to keystone-* files this will force consistency throughout. Script for the same (and hand modified for Makefile and config files): for i in arch/arm/dts/k2* do b=`basename $i`; git mv $i arch/arm/dts/keystone-$b; sed -i -e "s/$b/keystone-$b/g" arch/arm/dts/*[si] done This is similar to linux kernel commit 5edafc29829bc ("ARM: dts: k2*: Rename the k2* files to keystone-k2* files") [1] http://marc.info/?l=linux-arm-kernel&m=145637407804754&w=2 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-02-08aspeed: ast2500: Fix H-PLL and M-PLL clock rate calculationmaxims@google.com
Fix H-PLL and M-PLL rate calculation in ast2500 clock driver. Without this fix, valid setting can lead to division by zero when requesting the rate of H-PLL or M-PLL clocks. Signed-off-by: Maxim Sloyko <maxims@google.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08cmd: gpt: backup boot code before writing MBRVincent Tinelli
On some cases the first 440 bytes of MBR are used to keep an additional information for ROM boot loader. 'gpt write' command doesn't preserve that area and makes boot code gone. Preserve boot code area when run 'gpt write' command. Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Brennan Ashton <brn@deako.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08cmd: rework "license" commandMasahiro Yamada
The previous commit ("add a new command to show .config contents") improves the basic infrastructure of "embed a compressed file into the U-Boot image, and print it by a command". The same pattern for the "license" command. This commit reworks the command to improve the following: [1] Improve log style Kbuild style log GZIP cmd/license_data.gz CHK cmd/license_data_gz.h UPD cmd/license_data_gz.h CHK cmd/license_data_size.h UPD cmd/license_data_size.h instead of the bare Make log: cat ./Licenses/gpl-2.0.txt | gzip -9 -c | \ tools/bin2header license_gzip > ./include/license.h [2] Collect related code into the "cmd" directory Prior to this commit, the license.h was created by tools/Makefile, placed under the "include" directory, included from cmd/license.c, and deleted by the top-level Makefile. It is not a good idea to scatter related code. [3] Drop the fixed-malloc size LICENSE_MAX Just allocate the minimum required size of buffer because we know the size of the original gpl-2.0.txt. [4] Fix more issues Terminate the buffer with zero to prevent puts() from over-running. Add "static" to do_license. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08cmd: add a new command "config" to show .config contentsMasahiro Yamada
This feature is inspired by /proc/config.gz of Linux. In Linux, if CONFIG_IKCONFIG is enabled, the ".config" file contents are embedded in the kernel image. If CONFIG_IKCONFIG_PROC is also enabled, the ".config" contents are exposed to /proc/config.gz. Users can do "zcat /proc/config.gz" to check which config options are enabled on the running kernel image. The idea is almost the same here; if CONFIG_CMD_CONFIG is enabled, the ".config" contents are compressed and saved in the U-Boot image, then printed by the new command "config". The usage is quite simple. Enable CONFIG_CMD_CONFIG, then run > config from the command line interface. The ".config" contents will be printed on the console. This feature increases the U-Boot image size by about 4KB (this is mostly due to the gzip-compressed .config file). By default, it is enabled only for Sandbox because we do not care about the memory footprint on it. Of course, this feature is architecture agnostic, so you can enable it on any board if the image size increase is acceptable for you. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08scripts: import bin2c.c from Linux 4.10-rc6Masahiro Yamada
Import scripts/basic/bin2c.c of Linux. In Linux Kernel, this file was moved to scripts/basic directory by commit 8370edea81e3 ("bin2c: move bin2c in scripts/basic"). In U-Boot, we do not need to follow that commit. Just put it in the original directory "scripts". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08arm64: use store with auto-incrementMasahiro Yamada
Save one instruction. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08arm64: use xzr to zero-out the bss sectionMasahiro Yamada
AArch64 has a zero register (xzr). Use it instead of x2. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: make LOAD_FROM_32_BIT visible for platformsAndy Shevchenko
This option is useful not only for development, but for the platforms where U-Boot is run from custom ROM bootloader. For example, Intel Edison is that board. Make this option visible that platforms can select it if needed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: qemu: Add a config for 64-bit U-BootBin Meng
Add a new board config which uses 64-bit U-Boot. Supported features are the same as the other 64-bit board (Google Chromebook Link). It is a start for us to test 64-bit U-Boot easily without the need to access a real hardware. Note CONFIG_SPL_ENV_SUPPORT is required for QEMU 64-bit as without this the SPL build fails at the end. This is just a workaround as CONFIG_SPL_ENV_SUPPORT is not needed at all. common/built-in.o:(.data.env_htab+0xc): undefined reference to 'env_flags_validate' lib/built-in.o: In function `hsearch_r': lib/hashtable.c:380: undefined reference to 'env_callback_init' lib/hashtable.c:382: undefined reference to 'env_flags_init' make[1]: *** [spl/u-boot-spl] Error 1 Except those SPL options required by 64-bit, compared to 32-bit config, the following options are different: - CONFIG_SYS_MALLOC_F_LEN has to be increased to 0x1000 for SPL. - CONFIG_DEBUG_UART has to be included due to the weird issue. See TODO comments in arch/x86/cpu/x86_64/cpu.c:arch_setup_gd(). Once this issue gets fixed, debug uart can be optional. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: qemu: Add build options for SPLBin Meng
If SPL is used we want to use the generic SPL framework and boot from SPI via a board-specific means. Add these options to the board config file. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: qemu: Add a text base for 64-bit U-BootBin Meng
Set up the 64-bit U-Boot text base if building for that target. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07tools: binman: Handle optional microcode case in SPL imageBin Meng
On platforms which do not require microcode in SPL, handle such case like U-Boot proper. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07tools: binman: Call correct init for Entry_u_boot_spl_with_ucode_ptrBin Meng
u_boot_spl_with_ucode_ptr is derived from u_boot_with_ucode_ptr, hence it should call its parent's init. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: qemu: Mark ucode as optional for SPL in u-boot.dtsiBin Meng
QEMU does not need ucode and this is indicated in u-boot.dtsi for U-Boot proper. Now add the same for SPL. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: qemu: Set up device tree for SPLBin Meng
Add the correct pre-relocation tag so that the required device tree nodes are present in the SPL device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: qemu: Fix compiler warnings for 64-bitBin Meng
This fixes compiler warnings for QEMU in 64-bit. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: qemu: Hide arch_cpu_init() and print_cpuinfo() for U-Boot properBin Meng
arch_cpu_init() and print_cpuinfo() should be only available in SPL build. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: Compile irq.c for 64-bitBin Meng
There is no reason not to compile irq.c for 64-bit. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: spl: Add weak arch_cpu_init_dm()Bin Meng
arch_cpu_init_dm() might not be implemented by every platform. Implement a weak version for SPL. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: Wrap print_ch() with config optionBin Meng
print_ch() should not be used if DEBUG_UART is off. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: qemu: Add missing DECLARE_GLOBAL_DATA_PTR in e820.cBin Meng
DECLARE_GLOBAL_DATA_PTR is missing which causes 64-bit build error. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: link: Add a config for 64-bit U-BootSimon Glass
Add a new board config which uses 64-bit U-Boot. This is not fully functional but is it a start. Missing features: - SDRAM sizing - Booting linux - EFI support - SCSI device init (and others) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: Update compile/link flags to support 64-bit U-BootSimon Glass
Update config.mk settings to support both 32-bit and 64-bit U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: link: Add build options for SPLSimon Glass
If SPL is used we want to use the generic SPL framework and boot from SPI via a board-specific means. Add these options to the board config file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: link: Set up device tree for SPLSimon Glass
Add the correct pre-relocation tag so that the required device tree nodes are present in the SPL device tree. On x86 it doesn't make a lot of sense to have a separate SPL device tree. Since everything is in the same ROM we might as well just use the main device tree in both SPL and U-Boot proper. But we haven't implemented that, so this is a good first step. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: link: Add SPL declarations to the binman imageSimon Glass
When building for 64-bit we need to put an SPL binary into the image. Update the binman image description to reflect this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: link: Add a text base for 64-bit U-BootSimon Glass
Set up the 64-bit U-Boot text base if building for that target. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: Add a dummy setjmp implementation for x86_64Simon Glass
We don't have the code for this yet. Add a dummy version for now, so that EFI builds correctly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: Move setjmp to the i386 directorySimon Glass
This code is only used in 32-bit mode. Move it so that it does not get built with 64-bit U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: Move call64 to the i386 directorySimon Glass
This code is only used in 32-bit mode. Move it so that it does not get built with 64-bit U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: Change irq_already_routed to a local variableSimon Glass
This avoids using BSS before SDRAM is set up in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: Move turbo_state to global_dataSimon Glass
To avoid using BSS in SPL before SDRAM is set up, move this field to global_data. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: Move pirq_routing_table to global_dataSimon Glass
To avoid using BSS in SPL before SDRAM is set up, move this field to global_data. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: Support jumping from SPL to U-BootSimon Glass
Add a rough function to handle jumping from 32-bit SPL to 64-bit U-Boot. This still needs work to clean it up. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: Drop interrupt support in 64-bit modeSimon Glass
This is not currently supported, so drop the code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: Don't try to boot Linux from SPLSimon Glass
Booting into linux from 64-bit U-Boot is not yet supported. Avoid bringing in the bootm code until it is implemented. Of course 32-bit U-Boot still supports booting into both 32- and 64-bit kernels. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: Don't build 32-bit efi files on x86_64Simon Glass
These cannot be built in this mode, so drop them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: Don't build cpu files which are not supported on 64-bitSimon Glass
Some files cannot be built with 64-bit and mostly don't make sense in that context. Disable them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: Don't build call64 and setjmp on 64-bitSimon Glass
These are currently not supported. Calling 64-bit code from 64-bit U-Boot is much simpler, so this code is not needed. setjmp() is not yet implemented for 64-bit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: Don't try to run the VGA BIOS in 64-bit modeSimon Glass
This is not supported, so disable it for now. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: ivybridge: Provide a dummy SDRAM init for 64-bitSimon Glass
We don't support SDRAM init in 64-bit mode since it is essentially impossible to get into that mode before SDRAM set up. Provide dummy functions for now. At some point we will need to pass the SDRAM parameters through from SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-27 15:34:44 +0000