summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-21mpc83xx: Migrate BATS config to KconfigMario Six
The BATs (block address translation registers) determine the initial memory window mappings. Hence, they must be known at compile time and cannot be implemented in the DT mechanism. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21powerpc: Migrate HIGH_BATS to KconfigMario Six
Migrate the CONFIG_HIGH_BATS variable to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: pcie: Read the clock from registersMario Six
The MPC83xx DM timer driver disables arch.pciexp*_clk, and uses clk_get_rate instead. But the legacy MPC83xx PCIe driver still uses arch.pciexp*_clk for the clock. Hence, read the PCIe clock from the registers in the legacy MPC83xx PCIe driver. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Kconfig: Migrate HRCW to KconfigMario Six
The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Get rid of CONFIG_83XX_CLKINMario Six
MPC83xx uses CONFIG_83XX_CLKIN instead of CONFIG_SYS_CLK_FREQ to set the system clock. To migrate the architecture, we can replace CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ. To do this * replace all occurrences of CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ * set CONFIG_SYS_CLK_FREQ to the old value of CONFIG_83XX_CLKIN in all MPC83xx config files Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Replace CONFIG_83XX_CLKIN in calculationsMario Six
CONFIG_SYS_CLK_FREQ is the standard way to set the system clock frequency. On MPC83xx, CONFIG_83XX_CLKIN is used for this purpose. Hence, the obvious way is to replace CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ. A few MPC83xx boards use the CONFIG_83XX_CLKIN variable for computing CONFIG_SYS_NS16550_CLK. This makes it harder to replace CONFIG_83XX_CLKIN. But the value of the multiplicator can be read from the SPMR register. Hence, replace the static calculations with a call to a new get_bus_freq function, as other architectures do. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Migrate legacy PCI options to KconfigMario Six
The MPC83xx include files contain some settings of the PCI subsystem. Migrate these to Kconfig until a proper DM PCI driver exists. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21MPC837XERDB: Remove CONFIG_MPC837XERDBMario Six
CONFIG_MPC837XERDB is unused, and TARGET_MPC837XERDB could replace it. Hence, get rid of CONFIG_MPC837XERDB. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21MPC837XEMDS: Remove CONFIG_MPC837XEMDSMario Six
CONFIG_MPC837XEMDS is unused, and TARGET_MPC837XEMDS could replace it. Hence, get rid of CONFIG_MPC837XEMDS. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21MPC8315ERDB: Remove CONFIG_MPC8315ERDBMario Six
CONFIG_MPC8315ERDB is unused, and TARGET_MPC8315ERDB could replace it. Hence, get rid of CONFIG_MPC8315ERDB. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21MPC8313ERDB: Remove CONFIG_MPC8313ERDBMario Six
CONFIG_MPC8313ERDB is unused, and TARGET_MPC8313ERDB_NAND/TARGET_MPC8313ERDB_NOR Kconfig could replace it. Hence, get rid of CONFIG_MPC8313ERDB. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21strider: Migrate to CONFIG_TARGET_STRIDERMario Six
Use the proper CONFIG_TARGET_STRIDER Kconfig option to replace the CONFIG_STRIDER ad-hoc config option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21hrcon: Migrate to CONFIG_TARGET_HRCONMario Six
Use the proper CONFIG_TARGET_HRCON Kconfig option to replace the CONFIG_HRCON ad-hoc config option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21MPC8349ITX: Migrate to CONFIG_TARGET_MPC8349ITXMario Six
Use the proper CONFIG_TARGET_MPC8349ITX Kconfig option to replace the CONFIG_MPC8349ITX ad-hoc config option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21MPC832XEMDS: Migrate to CONFIG_TARGET_MPC832XEMDSMario Six
Use the proper CONFIG_TARGET_MPC832XEMDS Kconfig option to replace the CONFIG_MPC832XEMDS ad-hoc config option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21ve8313: Merge BR/OR settingsMario Six
The ve8313 has the option of either configuring the eLBC (enhanced local system bus) such that * NOR flash is the first memory bank, and NAND flash is the second memory bank, or * NAND flash is the first memory bank, and NOR flash is the second memory bank, by using CONFIG_SYS_NOR_{BR,OR}_PRELIM and CONFIG_SYS_NAND_{BR,OR}_PRELIM for defining CONFIG_SYS_{BR,OR}{0,1}_PRELIM. After Kconfig migration, replacing some lines in the defconfig will have the same effect. Hence, we will not create distinct ve8313_{NOR,NAND} configs for such a small change. Instead, fix the current default (NOR first, NAND second), and unroll the CONFIG_SYS_NAND_{BR,OR}_PRELIM options. This will ease the Kconfig migration Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc8315erdb: Merge BR/OR settingsMario Six
The mpc8315erdb has the option of either configuring the eLBC (enhanced local system bus) such that * NOR flash is the first memory bank, and NAND flash is the second memory bank, or * NAND flash is the first memory bank, and NOR flash is the second memory bank, by using CONFIG_SYS_NOR_{BR,OR}_PRELIM and CONFIG_SYS_NAND_{BR,OR}_PRELIM for defining CONFIG_SYS_{BR,OR}{0,1}_PRELIM. After Kconfig migration, replacing some lines in the defconfig will have the same effect. Hence, we will not create distinct ve8313_{NOR,NAND} configs for such a small change. Instead, fix the current default (NOR first, NAND second), and unroll the CONFIG_SYS_NAND_{BR,OR}_PRELIM options. This will ease the Kconfig migration. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Make distinct MPC8349EMDS_SDRAM boardMario Six
The MPC8349EMDS config file contains config options to enable SDRAM support. To keep this ability after the Kconfig migration, create a new MPC8349EMDS_SDRAM board that enables the SDRAM support and remove the SDRAM support from the original board. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20powerpc: Add LSDMR config valuesMario Six
The LSDMR_* macros are used to configure the system bus on MPC83xx. A few of the possible LSDMR_* macros were never defined in the respective include files. This renders the SDRAM support on the MPC8349EMDS unusable, because it uses these undefined macros. To make the SDRAM option work, introduce these macros into the proper config file. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Make distinct caddy2 configMario Six
vme8349.h contains two separate boards: The vme8349 itself, and the caddy2 board. The caddy2 board is chosen by setting certain config variables. Create a proper config file for the caddy2 board to make Kconfig migration easier. Furthermore, simplify the vme8349 and caddy2 configs by keeping only the options necessary for each board. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20vme8349: Migrate to CONFIG_TARGET_VME8349Mario Six
CONFIG_TARGET_VME8349 can replace CONFIG_VME8349. Hence, replace CONFIG_VME8349 with CONFIG_TARGET_VME8349, and remove CONFIG_VME8349. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Make distinct MPC8313ERDB targetsMario Six
MPC8313ERDB has the option of either enabling NOR or NAND boot in its config file (by commenting out certain #ifdefs). To keep this ability after migrating options to Kconfig, we introduce two MPC8313ERDB configs: one for NOR, and one for NAND. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Make distinct kmeter1, and kmcoge5ne configsMario Six
The kmeter1, and kmcoge5ne boards also build from the same config file with #ifdef logic. Create a separate include config for each board with the #ifdef logic resolved as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Unroll km/km83xx-common.hMario Six
Simplify the keymile config files once more by unrolling the km/km83xx-common.h, and resolve the #ifdef logic as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Make distinct kmsupx5, tuge1, kmopti2, and kmtepr2 configsMario Six
The kmsupx5, tuge1, kmopti2, and kmtepr2 boards all build from the same include config file with lots of #ifdef logic. To ease Kconfig migration, create new config include files for these boards, and resolve the #ifdef logic as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Unroll includesMario Six
To further simplify config include files, unroll the km/km8309-common.h and km/km8321-common.h include files. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Move config filesMario Six
We want to unroll several include files, while keeping include statements consistent. To make it easier to not break the include statements, move the include files to the main configs directory. All three include files moved will be unrolled, so they won't pollute the directory for long. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Make distinct kmtegr1, kmvect1, suvd3 configsMario Six
The kmtegr1, kmvect1, and suvd3 boards all use the same config include file with lots of #ifdefs in it. The Kconfig migation will become easier if we get rid of these #ifdefs first. Hence, create distinct config include files for these boards, and unwind the #ifdef logic in these config files to only include the options necessary for each board. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC837XMario Six
Replace CONFIG_MPC837x with a proper CONFIG_ARCH_MPC837X Kconfig option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC836*Mario Six
Replace CONFIG_MPC836* with proper CONFIG_ARCH_MPC836* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC834*Mario Six
Replace CONFIG_MPC834* with proper CONFIG_ARCH_MPC834* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC832*Mario Six
Replace CONFIG_MPC832* with proper CONFIG_ARCH_MPC832* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC831*Mario Six
Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC830*Mario Six
Replace CONFIG_MPC830* with proper CONFIG_ARCH_MPC830* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-19Revert "Makefile: Prioritize external dtb if defined"Tom Rini
This is causing unexpected size growth in the normal case and is likely to have been mis-applied by myself. This reverts commit 3eaf6dcd9362b56e3217559401287dd8fa35b5b2. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-19Merge tag 'efi-2019-07-rc3-2' of git://git.denx.de/u-boot-efiTom Rini
Pull request for UEFI sub-system for v2019.07-rc3 (2) Minor patches to improve UEFI specification compliance are provided. To allow running the UEFI self compliance tests an outdated version of the Unicode collation protocol has been added as a configuration option (disabled by default).
2019-05-19Merge git://git.denx.de/u-boot-x86Tom Rini
- Allow coreboot to process unhandled tags - Enable NVMe on QEMU x86_64 target
2019-05-19Merge branch '2019-05-19-master-imports'Tom Rini
- Convert SYS_[DI]CACHE_OFF to Kconfig, introduce SPL variant. - Various bcm96* fixes. - Import include/android_bootloader_message.h from AOSP - Assorted other small fixes.
2019-05-19x86: qemu-x86_64: Enable NVMeBin Meng
NVMe was turned on in qemu-x86 but somehow we missed it for 64-bit. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-19nvme: Fix warning of cast from pointer to integer of different sizeBin Meng
When dma_addr_t is u32 in 64-bit, there are some warnings when building NVME driver. Fix it by doing an additional (long) cast. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-19x86: coreboot: make it possible to process unhandled tagsChristian Gmeiner
coreboot makes it possible to add own entries into coreboot's table at a per mainboard basis. As there might be some custom ones it makes sense to provide a way to process them. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-19efi_loader: parameter check OutputStringHeinrich Schuchardt
Check the parameters against NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL.SetState() correct parameterHeinrich Schuchardt
KeyToggleState is a pointer according to UEFI spec 2.8. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: GetNextMonotonicCount() check parameterHeinrich Schuchardt
Do not write to address indicated by NULL pointer. UEFI SCT II 2.6 (2017), 3.6.5 GetNextMonotonicCount(), 5.1.5.5.1 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: parameter checks CalculateCrc32()Heinrich Schuchardt
Not checking the parameters may lead reading or writing from NULL. Implement the parameter checks prescribed in the UEFI spec. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: check device path in InstallMultipleProtocolInterfacesHeinrich Schuchardt
According to the UEFI spec InstallMultipleProtocolInterfaces() must check if a device path has already been installed. In this case it must return EFI_ALREADY_STARTED. Cf. UEFI SCT II 2.6 A (2017), 3.3.16 InstallMultipleProtocolInterfaces(), 5.1.3.16.1. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: implement deprecated Unicode collation protocolHeinrich Schuchardt
In EFI 1.10 a version of the Unicode collation protocol using ISO 639-2 language codes existed. This protocol is not part of the UEFI specification any longer. Unfortunately it is required to run the UEFI Self Certification Test (SCT) II, version 2.6, 2017. So we implement it here for the sole purpose of running the SCT. It can be removed once a compliant SCT is available. The configuration option defaults to no. Signed-off-by: Rob Clark <robdclark@gmail.com> Most of Rob's original patch is already merged. Only the deprecated protocol is missing. Rebase it and make it configurable. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: rename Unicode collation protocol 2 variablesHeinrich Schuchardt
Rename variables to make it clear they refer to the Unicode collation protocol identified by the EFI_UNICODE_PROTOCOL2_GUID. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: merge adjacent sprintf()Heinrich Schuchardt
In the implementation of the device path to text protocol join adjacent sprintf() statements. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: parameter checks simple network protocolHeinrich Schuchardt
Check buffer pointers are not NULL as required by the UEFI 2.7 spec. Return EFI_UNSUPPORTED instead of EFI_INVALID_PARAMETER when trying to transmit with non-zero header_size. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit (git 2.34.1) at 2024-12-23 23:32:42 +0000