summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-12-04mtd: ensure MTD is compiled when CMD_MTDPARTS is selectedMiquel Raynal
MTD support must be enabled when using mtdparts. Indeed, functions like get_mtd_info(), get_mtd_device() and put_mtd_device() are in drivers/mtd/mtd_uboot.c and are built only with CONFIG_MTD. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04mtd: ensure CMD_NAND is compiled when its options are selectedMiquel Raynal
In some files, options of CMD_NAND are selected but not the command itself. Fix this inconsistency. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04mtd: ensure MTD_RAW_NAND is compiled when ENV_IS_IN_NAND is selectedMiquel Raynal
Raw NAND support must be enabled when the environment is in NAND. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04mtd: ensure UBI is compiled when ENV_IS_IN_UBI is selectedMiquel Raynal
UBI must be enabled when the environment is in UBI. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04mtd: ensure UBI is compiled when using fastmapMiquel Raynal
UBI must be enabled when using fastmap, reflect this is defconfigs. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04mtd: ensure MTD is compiled when there is a SPI NOR flash using MTDMiquel Raynal
MTD must be enabled when there is a SPI NOR flash using the SPI_FLASH_MTD config entry. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flashMiquel Raynal
Both symbols must be enabled when there is a raw NAND driver selected. Also enable them when CONFIG_CMD_NAND is selected to avoid breaking things when we'll further rework the MTD dependency description. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Rebase and migrate a few more boards here] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04ARM: rmobile: Convert M2N Gose to DM_SPI{,_FLASH}Marek Vasut
Enable DM_SPI and DM_SPI_FLASH in U-Boot on M2N Gose. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-12-04ARM: rmobile: Convert M2W Koelsch to DM_SPI{,_FLASH}Marek Vasut
Enable DM_SPI and DM_SPI_FLASH in U-Boot on M2W Koelsch. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-12-04ARM: rmobile: Convert H2 Lager to DM_SPI{,_FLASH}Marek Vasut
Enable DM_SPI and DM_SPI_FLASH in U-Boot on H2 Lager. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-12-03mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTDMiquel Raynal
Like in Linux, just use CONFIG_MTD to compile the MTD stack. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-03mtd: rename CONFIG_MTD -> CONFIG_DM_MTDMiquel Raynal
CONFIG_MTD must be reserved for the MTD core. Like any other subsystem, prefix the symbol by DM when it comes to DM support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Add Kconfig files] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NANDMiquel Raynal
Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-03Merge tag 'efi-2020-01-rc5' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-01-rc5 A type error in the implementation of the efidebug command is fixed.
2019-12-03Merge tag 'dm-pull-3dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini
Fix stdout-path handling
2019-12-03Merge branch '2019-12-03-master-imports'Tom Rini
- omapl138_lcdk fixes - MediaTek MT8518 support - VxWorks standard DTB support - Assorted bug fixes
2019-12-03cmd: efidebug: fix a build error in show_efi_boot_opt()AKASHI Takahiro
I detected the following error in sandbox with Clang on Travis CI: +cmd/efidebug.c:703:15: error: result of comparison of constant 9223372036854775822 with expression of type 'int' is always false [-Werror,-Wtautological-constant-out-of-range-compare] + else if (ret == EFI_NOT_FOUND) + ~~~ ^ ~~~~~~~~~~~~~ Simply changing a type of 'ret' to efi_status_t will fix this error. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-03arm64: zynqmp: Point zcu216 defconfig to correct dts fileMichal Simek
Defconfig is pointing to incorrect DT file which needs to be fix. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-03ARM: MediaTek: add basic support for MT8518 boardsmingming lee
This adds a general board file based on MT8518 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8518 eMMC board. Signed-off-by: mingming lee <mingming.lee@mediatek.com> [trini: Migrate env location to defconfig, set ENV_IS_IN_MMC] Signeed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03pinctrl: add driver for MT8518mingming lee
Add Pinctrl driver for MediaTek MT8518 SoC. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-03mmc: mtk-sd: Adjust the mmc tuning flowmingming lee
1.Support cmd response and data tuning together. 2.Support hs400 cmd responese tuning. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-03clk: mediatek: add driver for MT8518mingming lee
Add clock driver for MediaTek MT8518 SoC. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-03ARM: MediaTek: Add support for MediaTek MT8518 SoCmingming lee
Add support for MediaTek MT8518 SoC. This include the file that will initialize the SoC after boot and its device tree. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-03regmap: Fix potential memory leaksFaiz Abbas
Free allocated memory in case of an error in regmap_init_mem() and regmap_init_mem_index(). Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-12-03net: cpsw: Add NULL pointer checkFaiz Abbas
Add null pointer check to take care of out of memory errors. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2019-12-03spl: ymodem: Fix loading of fit imageLokesh Vutla
spl ymodem driver always assumes that 1 BUF_SIZE is read in one stream. This might not be true when image is not padded to BUF_SIZE and the last sector that gets loaded will be < BUF_SIZE. Drop this assumption and use the actual size that is loaded. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-03mmc: davinci: fix mmc boot in SPLBartosz Golaszewski
The MMC boot is currently broken on omapl138-lcdk after enabling the driver model in SPL. The main problem is the driver's bind callback not being called after probe in SPL (even with the DM_FLAG_PRE_RELOC flag specified). While a proper fix is still being worked on, this hacky changeset at least fixes the MMC boot on this platform by calling mmc_bind() manually from probe(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03board: omapl138_lcdk: add the mmc device to SPLBartosz Golaszewski
We don't have full device-tree support in SPL yet - add an appropriate U_BOOT_DEVICE() to the board file. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03mmc: davinci: drop struct davinci_mmc_platBartosz Golaszewski
struct mmc_config & struct mmc don't need to be exported over platform data, but can instead be private in the driver. Remove struct davinci_mmc_plat. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03mmc: davinci: drop support for ti,dm6441-mmcBartosz Golaszewski
The DM family of DaVinci SoCs is no longer supported. Drop the irrelevant code from the driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03ARM: omapl138_lcdk: Allow early init to start instruction cacheAdam Ford
Currently the omapl138_lcdk has SKIP_LOWLEVEL_INIT set. The README states there is a variation of this for the ARM926EJ-S which allows the board to just skip the call to lowlevel_init() and do the normal CP15 init which enables the instruction cache. On the da850evm, this was shown to improve startup time. This patch switches SKIP_LOWLEVEL_INIT to SKIP_LOWLEVEL_INIT_ONLY thus, enabling the cache. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03ARM: omapl138_lcdk: Enable SPL_DM_SEQ_ALIAS and SPL_OF_TRANSLATEAdam Ford
In order to further prepare for full device tree support in SPL, this patch enables both SPL_DM_SEQ_ALIAS and SPL_OF_TRANSLATE. Both of these are already enabled in U-Boot, so SPL will have the same functionality Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03ARM: omapl138_lcdk: Increase malloc pool before relocationAdam Ford
Driver model requires a malloc pool to allocate memory before relocations to operate serial and some other devices. This patch increases the pool size to 2K. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03ARM: omapl138_lcdk: Separate BSS in SPLAdam Ford
In preparation to use full device tree support, SPL can separate BSS from text region. This patch enables SPL_SEPARATE_BSS. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03cmd: pxe: Fix bootm argument countAbhishek Shah
pxe command parses the init ramfs address(through initrd lable in pxe config file), but is not passing it to bootm command as argument as bootm_argc count is not increased. Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-12-03armv7m: cache: add invalidate_icache_all() stubGiulio Benetti
This commit: https://gitlab.denx.de/u-boot/u-boot/commit/d409c962169bd293e39386d0ddfa64d5222a3be4 causes build failure with ICACHE enabled. This is due to missing invalidate_icache_all() stub. Let's add empty invalidate_icache_all() in the case where ICACHE is not enabled. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2019-12-03MAINTAINERS: Add info for bcm283xMatthias Brugger
The bcm283x has grown in files, which was not reflected in the MAINTAINERS file. Fix this by adding the missing entries. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-12-03blk: Make use of CONFIG_HAVE_BLOCK_DEVICE moreTom Rini
When we do not have CONFIG_BLK (or SPL/TPL) enabled there are very few cases where we need the blk_legacy code linked in. To catch these, build when we have CONFIG_HAVE_BLOCK_DEVICE set. In addition, we only need cmd/blk_common.o to be linked in when we have CONFIG_HAVE_BLOCK_DEVICE set, so make use of that directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03mtd: mtdcore: Drop unused mtd_tableTom Rini
The array 'mtd_table' is unused in the code. Remove this as gcc doesn't always discard unused global variables. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03pci: Only link pci_rom.o in some casesTom Rini
The content of pci_rom.c is only used in a few cases. Only build and link in these cases to avoid a global variable as gcc doesn't always discard those when they are unused. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03Convert CONFIG_SYS_CORTINA_FW_IN_MMC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_CORTINA_FW_IN_MMC CONFIG_SYS_CORTINA_FW_IN_NAND CONFIG_SYS_CORTINA_FW_IN_NOR CONFIG_SYS_CORTINA_FW_IN_REMOTE CONFIG_SYS_CORTINA_FW_IN_SPIFLASH Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03Convert CONFIG_PHY_CORTINA to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHY_CORTINA Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03bootm: vxworks: Support Linux compatible standard DTB for ARM and PPCLihua Zhao
Enhance do_bootm_vxworks() to support Linux compatible standard DTB for ARM and PPC, when the least significant bit of flags in VxWorks bootargs is set. Otherwise it falls back to the existing bootm flow which is now legacy. Signed-off-by: Lihua Zhao <lihua.zhao@windriver.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-03tbs2910: Disable VxWorks image booting supportTom Rini
There are currently no known users of this functionality on this platform, disable it to prepare for additional VxWorks functionality that would cause this platform to fail to link. Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Soeren Moch <smoch@web.de>
2019-12-03cosmetic: Fix spelling and whitespace errorsThomas Hebb
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-03Makefile: add Rockchip idbloader.img to CLEAN_FILESThomas Hebb
This file is generated in the root during Rockchip builds and so should be cleaned up. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
2019-12-03Makefile: consolidate hardcoded lists of files to cleanThomas Hebb
Currently, we have two places where we list files that should always be cleaned if they exist. One, the CLEAN_FILES variable, is from the Linux build system and is the proper place to list files. The other, a set of extra arguments passed in the xargs template used to remove files with certain extensions, was introduced by 8f06f0cee3d3 ("Makefile: clean image.map") and is clearly wrong: by extending the xargs template, we attempt to remove the files once for each batch of arguments that xargs produces and we reduce the number of files from stdin that xargs can include in each of its rm commands. To fix this, put all hardcoded files into CLEAN_FILES. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-03Makefile: don't try to construct CLEAN_FILES based on configThomas Hebb
All of the clean targets (clean, dist-clean, mrproper) are run without loading a configuration. That means that any conditional modification of CLEAN_FILES will either always apply or never apply and so shouldn't be in a conditional in the first place. Since CLEAN_FILES is allowed to list nonexistent files, just add everything to it unconditionally to fix the issue. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-03Kconfig: make TPL_DM_SERIAL depend on TPL_DMThomas Hebb
This missing dependency seems like an oversight, since all other TPL_DM_* options have it. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-03Kconfig: disambiguate config names for tiny printfThomas Hebb
27084c03d36a ("spl: Allow tiny printf() to be controlled in SPL and TPL") split this option in two for TPL and SPL, but didn't change the Kconfig names, making them hard to set quickly. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-29 10:49:31 +0000