summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-12mx6: clock: Add a prototype for do_mx6_showclocks()Diego Dorta
When compiling with W=1 the following warning is observed: arch/arm/mach-imx/mx6/clock.c:1268:5: warning: no previous prototype for ‘do_mx6_showclocks’ [-Wmissing-prototypes] int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) Remove this warning by adding the function prototype into arch-mx6/clock.h file. Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12i.mx6ul: xpress: update UART init for current board revisionAnatolij Gustschin
UART pinmux has been changed on the last board revision. Change board pinmux accordingly. Console is on UART7 now, add pinmux, base address and update console string in environment. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-10-12mx6slevk: Use PARTUUID to specify the rootfs locationFabio Estevam
mx6slevk can run different kernel versions, such as NXP 4.1 or mainline. Currently the rootfs location is passed via mmcblk number and the problem with this approach is that the mmcblk number for the SD card changes depending on the kernel version. In order to avoid such issue, use the UUID method to specify the rootfs location. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12drivers: pci: imx: fix imx_pcie_remove functionSven-Ola Tuecke
We have at least a minor count of boards, that failed to re-initialize PCI express in the Linux kernel. Typical failure rate is 20% on affected boards. This is mitigated by commit 6ecbe1375671 ("drivers: pci: imx: add imx_pcie_remove function"). However, at least on some i.MX6 custom boards, when calling assert_core_reset() as part of the first-time PCIe init, read access to PCIE_PL_PFLR simply hangs. Surround this readl() with imx_pcie_fix_dabt_handler() does not help. For this reason, the forced LTSSM detection is only used on the second assert_core_reset() that is called shorly before starting the Linux kernel. Signed-off-by: Sven-Ola Tuecke <sven-ola.tuecke@numberfour.eu> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: David Müller <d.mueller@elsoft.ch>
2017-10-12wandboard: Add support for the latest revd1 revisionFabio Estevam
Latest wandboard hardware revision is revd1, which brings the following new features: - PFUZE100 PMIC - AR8035 Ethernet PHY - Upgrade Wifi/BT chip to BCM4339/BCM43430. The detection mechanism is to probe the PMIC and when it is found, then the revision of the board is revd1. As the detection is done via PMIC, we need to print the board version at a later stage via CONFIG_DISPLAY_BOARDINFO_LATE and also need to disable CONFIG_DISPLAY_BOARDINFO, which is done much earlier. Make the necessary adjustments for the AR8035 PHY to work on revd1. Based on Richard Hu's work from Technexion's U-Boot tree. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12doc: update imx_usb_loader URLStefan Agner
The changes required to use U-Boot's Serial Download Protocol implementation are now available in upstream imx_usb_loader repository. Update the URL accordingly. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-12arm: imx7d: add support for Compulab cl-som-imx7Ilya Ledvich
Add initial support for Compulab cl-som-imx7 SoM. The initial support includes: - MMC - eMMC - SPI flash - I2C - FEC - USB - Serial console Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
2017-10-12imx: mx7: SPL support for i.MX7Uri Mashiach
Add configuration file and spl_boot_device function for the i.MX7 SPL. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2017-10-12imx: mx7: DDR controller configuration for the i.MX7 architectureUri Mashiach
The configuration files imximage.cfg are used for the DDR controller configuration. Add DDR configuration function to replace the DDR controller configuration in the imximage.cfg file. The function can be used for DDR size detection. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2017-10-12imx: mx7: fix the CCM_ macrosUri Mashiach
The CCM_ macros use the CCM_BASE_ADDRESS macro, which doesn't exist. Replace the CCM_BASE_ADDRESS macros with CCM_BASE_ADDR. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2017-10-12icorem6_rqs: env: Return mmc devnoJagan Teki
Instead of changing mmc devno from dts nodes better to return the detected devno so-that env trigger the same. Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-10-12icore: configs: Fix merge conflict issueJagan Teki
Fix for finding mmc devices on i.MX6Q icore boards added in below comment "icorem6: Fix to find MMC devices" (sha1: a2b137b38d925df91afef52f5122927de024f81a) which is reverted in during u-boot-imx merge " Merge git://git.denx.de/u-boot-imx" (sha1: 6aee2ab68c362ace5a59f89a63abed82e0bf19e5) This patch, is recreated to fix merge conflict. Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-10-12topic_miami: Remove CONFIG_CMD_BOOTZ undefFabio Estevam
CONFIG_CMD_BOOTZ option has been converted to defconfig, so there is no need to undefine it in board config file anymore. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12mx6sabresd: Include <usb/ehci-ci.h> header fileDiego Dorta
When compiling with W=1 the following warning is observed: board/freescale/mx6sabresd/mx6sabresd.c:586:5: warning: no previous prototype for ‘board_ehci_hcd_init’ [-Wmissing-prototypes] int board_ehci_hcd_init(int port) Remove this warning by including <usb/ehci-ci.h>. Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12usb: ehci-ci: Add a prototype for board_ehci_power()Diego Dorta
When compiling with W=1 the following warning is observed: board/freescale/mx6sabresd/mx6sabresd.c:601:5: warning: no previous prototype for ‘board_ehci_power’ [-Wmissing-prototypes] int board_ehci_power(int port, int on) Remove this warning by adding the function prototype into usb/ehci-ci.h file. Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12mx6sabresd: Include <asm/mach-imx/spi.h> header fileDiego Dorta
When compiling with W=1 the following warning is observed: board/freescale/mx6sabresd/mx6sabresd.c:680:5: warning: no previous prototype for ‘board_spi_cs_gpio’ [-Wmissing-prototypes] int board_spi_cs_gpio(unsigned bus, unsigned cs) Remove this warning by including <asm/mach-imx/spi.h>. Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12mx6: soc: Include <asm/bootm.h> header fileDiego Dorta
When compiling with W=1 the following warning is observed: arch/arm/mach-imx/mx6/soc.c:213:12: warning: no previous prototype for ‘get_board_rev’ [-Wmissing-prototypes] u32 __weak get_board_rev(void) Fix the build warning by including <asm/bootm.h>. Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12mx7ulp_evk: Move CONFIG_CMD_BOOTZ to KconfigFabio Estevam
CONFIG_CMD_BOOTZ symbol does not work in board config file anymore, so fix this by moving it to Kconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2017-10-12imx: sys_proto: Add a prototype for board_mmc_get_env_dev()Diego Dorta
When compiling with W=1 the following warning is observed: board/freescale/mx6sabresd/mx6sabresd.c:266:5: warning: no previous prototype for ‘board_mmc_get_env_dev’ [-Wmissing-prototypes] int board_mmc_get_env_dev(int devno) Remove this warning by adding the function prototype into sys_proto.h file. Signed-off-by: Diego Dorta <diego.dorta@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-10-12imx: Include <input.h> header fileDiego Dorta
When building with W=1 errors like the one below is seen: board/freescale/mx6sabresd/mx6sabresd.c:546:5: warning: no previous prototype for ‘overwrite_console’ [-Wmissing-prototypes] int overwrite_console(void) Fix the build warnings by including <input.h>. Signed-off-by: Diego Dorta <diego.dorta@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12mx6: toradex: Remove custom CONFIG_SPL_PAD_TO definitionFabio Estevam
CONFIG_SPL_PAD_TO is already defined inside "imx6_spl.h", so there is no need to redefine it in the board config files. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2017-10-12mx25pdk: Remove duplicated defineOtavio Salvador
The CONFIG_SYS_MMC_ENV_DEV is duplicated, drop it. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-12mx25pdk: Use generic filesystem commandsOtavio Salvador
This rework the board to use the generic filesystem commands instead of forcing the use of FAT for the boot files. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-12README.imx6: Prefer loading SPL via the new SDP mechanismFabio Estevam
Now that it is possible to load SPL and u-boot.img via imx_usb_loader tool, mention this method instead of the old one that relied on ymodem. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12mx53loco: Let CONFIG_DISPLAY_CPUINFO be selectedFabio Estevam
With CONFIG_DISPLAY_CPUINFO=y we get a "Reset cause" line, which brings important information of the reboot cause. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12imx6: disable clock command and print_cpuinfo code in SPLAnatolij Gustschin
We do not use print_cpuinfo and clock command code in SPL, disable it when building SPL image. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-10-12colibri_imx6: Avoid calling setup_display() from SPL codeFabio Estevam
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12apalis_imx6: Avoid calling setup_display() from SPL codeFabio Estevam
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12mx6cuboxi: Avoid calling setup_display() from SPL codeFabio Estevam
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-10-12wandboard: Avoid calling setup_display() from SPL codeFabio Estevam
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-10-12cgtqmx6eval: Avoid calling setup_display() from SPL codeFabio Estevam
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-10-12mx6sabresd: Avoid calling setup_display() from SPL codeFabio Estevam
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-10-11Merge git://git.denx.de/u-boot-i2cTom Rini
2017-10-11i2c: muxes: pca954x: look up width from chip_descChris Packham
Commit 8e6eda7cda6c ("drivers/i2c/muxes/pca954x: Add pca9547 I2C mux support") introduced a chip_desc for the pca954x devices but failed to update pca954x_ofdata_to_platdata() to be aware of it. Make pca954x_ofdata_to_platdata() lookup the chip_desc to validate the device width. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Marek Behun <marek.behun@nic.cz>
2017-10-10Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini
2017-10-10configs: Re-sync CONFIG_CMD_IMLS with moveconfigTuomas Tynkkynen
The option is specified in Kconfig, but still a few config header files are overriding the choice by #undef'ing it. Re-sync the option with moveconfig to rid of the #undefs. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-10cmd: Toggle the default value of CONFIG_CMD_IMLSTuomas Tynkkynen
Having this as a 'default y' is rather annoying because it doesn't actually compile unless other options are defined in the board header: ../cmd/bootm.c: In function 'do_imls_nor': ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'? i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) { Make it 'default n' so people who develop new boards that start from a blank defconfig have one less compilation failure to debug. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-09Merge git://git.denx.de/u-boot-dmTom Rini
2017-10-10ARM: rmobile: dts: Add SDR104/HS200 to Salvator-XMarek Vasut
Add DT nodes to enable SDR104/HS200 modes on Salvator-X boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-10-10ARM: rmobile: Fixup ULCB CPLD support after PFC reworkMarek Vasut
The ULCB CPLD support was not updated during the PFC table rework, fix up the GPIO numbers until the CPLD support is rewritten to a proper DM capable and DT probing driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-10-09Merge git://git.denx.de/u-boot-videoTom Rini
2017-10-08sandbox: avoid memory leak in os_dirent_lsHeinrich Schuchardt
Realloc does not free the old memory area if it fails. Identified by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-08dm: ofnode: query correct property in livetree ofnode_get_addr_sizeKlaus Goger
The livetree codepath of ofnode_get_addr_size always used the "reg" property for of_get_property. Use the property parameter of the function call instead and check the return value if the property exists. Otherwise return FDT_ADDR_T_NONE. This was discoverd while using SPI NOR with livetree. spi_flash_decode_fdt checks for memory-map and will not fail with livetree even if the property does not exist. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-08dm: core: Round up size when allocating so that it is cache line alignedFaiz Abbas
The size variable may not be always be a mulitple of ARCH_DMA_MINALIGN and using it to flush cache leads to cache misaligned warnings. Therefore, round up the size to a multiple of ARCH_DMA_MINLAIGN when allocating private data. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-08dm: gpio: pca953x: Drop pointless data structure checksSimon Glass
These checks cannot fail since driver model will not call a driver's method if it cannot fully create the driver data structures. It is confusing to have these checks and others might copy them. Drop this code. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-10-08dm: gpio: Correct use of -ENODEV in driversSimon Glass
In U-Boot -ENODEV means that there is no device. When there is a problem with the device, drivers should return an error like -ENXIO or -EREMOTEIO. When the device tree properties cannot be read correct , they should return -EINVAL. Update various GPIO drivers to follow this rule, to help with consistency for future driver writers. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Adam Ford <aford173@gmail.com>
2017-10-08dm: gpio: Add a comment about not copying some driversSimon Glass
These three drivers all use U_BOOT_DEVICE rather than device tree to create devices, so have to do manual allocation of platform data. This is not true for new platforms. Add a more explicit comment so that people do not copy this approach with new boards. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Adam Ford <aford173@gmail.com>
2017-10-08dm: gpio: vybrid_gpio: Correct driver's use of bind() methodSimon Glass
It does not look like this driver needs to use a bind() method. It does not manually create devices with device_bind() nor does it create devices using U_BOOT_DEVICE(). It seems to only use device tree. Therefore the manual allocation of platform data is not needed and is confusing. Also platform data should be set up by the ofdata_to_platdata() method, not bind(). Update the driver in case others use it as a model in future. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Adam Ford <aford173@gmail.com>
2017-10-08test: print_ut: Add test for %ls stringsRob Clark
Add a simple test for long strings. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-08configs: stm32h743-eval: enable filesystem related flagsPatrice Chotard
Enable CMD_GPT/EXT2/EXT4/EXT4_WRITE/FAT_FS_GENERIC flags Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit (git 2.34.1) at 2024-12-28 07:17:37 +0000