summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-04-20usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to KconfigSam Protsenko
Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and make all UDC controllers select USB_GADGET_DUALSPEED: - add next options to Kconfig selecting USB_GADGET_DUALSPEED: - USB_GADGET_ATMEL_USBA - USB_GADGET_DWC2_OTG - USB_DWC3 - CI_UDC - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED While at it, make some related fixes: - remove DUALSPEED from configs that don't enable gadget support: - kwb.h - tseries.h - add missing USB_GADGET option to next configs: - novena_defconfig - pcm051_rev*_defconfig - xfi3_defconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to KconfigSam Protsenko
The description was borrowed from kernel. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig. Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use 2 mA (as minimal allowed by Kconfig). Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20usb: ums - expose selected partition/sJohn Tobias
By applying this patch, it will give us some flexibility to expose a selected partition/s. e.g: 1. To expose several partitions ums 0 mmc 0:1,0:6 2. To expose the all partitions ums 0 mmc 0:0 3. To expose multiple partititions on several devices ums 0 mmc 0:1,1:6 4. It support legacy format ums 0 mmc 0 Signed-off-by: John Tobias <john.tobias.ph@gmail.com>
2016-04-20USB: g_dnl: Change device classJohn Tobias
The USB Mass Storage (ums) works in Windows, Linux and OS X (EL Capitan). But, not in OS X (Yosemite). By applying the said patch, it extends the ums support. Signed-off-by: John Tobias <john.tobias.ph@gmail.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Test HW: Odroid XU3 (./test/py UMS + DFU tests) Tested-by: John Tobias <john.tobias.ph@gmail.com> Linux: - Run ums to expose all my eMMC partition - shows all correctly - Run ums to expose only 1 partition of my eMMC - show correctly Windows: - Run ums to expose all my eMMC partition - it detects but it prompts, if I want to format it (due to a non windows partition) - Run ums to expose only the FAT32 partition - it show the partition correctly.
2016-04-16ARM: rpi: fix 64-bit CONFIG_SYS_TEXT_BASEStephen Warren
The Pi firmware has changed the default "kernel" load address for 64-bit mode. The authors have confirmed that this is a deliberate and long-term change. Adapt U-Boot to the new value. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2016-04-15drivers/tpm/tpm_tis_sandbox.c: Fix uninitialized variable useTom Rini
In rollback_space_kernel we were not initializing the reserved fields which should be for safety sake, and doing memset here means we don't need to set the version field specifically either. Reported-by: Coverity (CID: 143917) Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-15fdt: implement dev_get_addr_name()Stephen Warren
This function parses the reg property based on an index found in the reg-names property. This is required for bindings that are written using reg-names rather than hard-coding indices in reg. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-04-15sandbox: Enable many more commandsTom Rini
- Set CONFIG_SYS_CACHELINE_SIZE to ARCH_DMA_MINALIGN as that should be good enough. - Make <asm/io.h> include <asm/types.h> like other arches do - Enable many many more drivers in sandbox_defconfig so that we can get more build-time testing on this platform. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-14test/dm/core.c: Make pre-reloc test use pre-reloc structTom Rini
LLVM 3.5 noted: test/dm/core.c:41:35: warning: unused variable 'test_pdata_pre_reloc' [-Wunused-const-variable] static const struct dm_test_pdata test_pdata_pre_reloc = { And the correct fix here is that the driver_info_pre_reloc test should use the test_pdata_pre_reloc not test_pdata_manual variable Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-14board: README.sandbox: Update dm test commandJagan Teki
Update dm test command with pytest instead of ./test/dm/test-dm.sh Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-04-14doc: driver-model: Update dm tests run using test.pyJagan Teki
Since all the tests are implemented in pytest infrastructure, So update the dm tests with the same instead of ./test/dm/test-dm.sh Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-04-14dm: device.c: Minor coding-style fixStefan Roese
Fix multi-line comment indentation in device_bind() Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-04-14dm: part: fix missing driver name in debug printNishanth Menon
Fixes the following warning with PART_DEBUG enabled: disk/part.c: In function ‘get_partition_info’: disk/part.c:372:3: warning: format ‘%s’ expects a matching ‘char *’ argument [-Wformat] Signed-off-by: Nishanth Menon <nm@ti.com>
2016-04-14dm: core: device: set pinctrl state for pinctrl devicePeng Fan
We may have pinmux settings for pinctrl device, like the following example: " &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog_1>; imx6ul-evk { pinctrl_hog_1: hoggrp-1 { fsl,pins = < MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */ MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x80000000 >; }; [......] }; " We should not only select pinctrl state for non pinctrl devices, we need also to handle pin mux settings such as pinctrl_log for pinctrl devices. So at the end of probing process of pinctrl device, select the default state of pinctrl device. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-13xpress: Update <usb/ehci-fsl.h> includeTom Rini
This has been renamed to <usb/ehci-ci.h> some time ago but was missed here. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-13Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini
2016-04-13ARM64: zynqmp: Use i2c cadence DM driverMichal Simek
Use i2c cadence DM driver for all zynqmp targets except ZCU102 because I2C muxes and PCA953x are not supported in the tree yet. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2016-04-13dm: i2c: Add driver for Cadence I2C IPMoritz Fischer
This is a possible drop in replacement for drivers/i2c/zynq-i2c.c Since this is cadence IP it has been renamed to cdns-i2c, to make sense with the compatible string. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13i2c: Describe Cadence I2C devicetree bindingsMoritz Fischer
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Enable pca953x driver for zcu102Michal Simek
zcu102 has two pca953x on i2c bus 0. Chips 0x20 and 0x21. Enable option to work with these two chips. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13GPIO: pca953x: Remove compilation warnings on arm64Michal Simek
Warnings: w+../drivers/gpio/pca953x.c: In function ‘do_pca953x’: w+../drivers/gpio/pca953x.c:220:5: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] w+../drivers/gpio/pca953x.c:233:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Enable CMD_GPIO and DM_GPIO for ep108Michal Simek
Enable missing GPIO options. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13zynqmp: Kconfig: Enable ZYNQ_GPIO for ZynqMPSiva Durga Prasad Paladugu
Enable ZYNQ_GPIO for ZynqMP using Kconfig. It enables the GPIO driver support for ZynqMP. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13gpio: zynqmp: Add GPIO driver support for ZynqMPSiva Durga Prasad Paladugu
Add GPIO driver support for ZynqMP platform Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13gpio: zynq: Move the definitions to driver fileSiva Durga Prasad Paladugu
Move all the gpio definitions to driver file as there is no use of them in other files. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13gpio: zynq: Remove non driver model codeSiva Durga Prasad Paladugu
Remove non driver model support as it moved to driver model. Dont need non driver model anymore. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13gpio: Kconfig: Enable Zynq GPIO driver using kconfigSiva Durga Prasad Paladugu
Enable DM GPIO and ZYNQ GPIO using kconfig instead of the board config file. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13gpio: zynq: Convert Zynq GPIO to driver modelSiva Durga Prasad Paladugu
Convert Zynq GPIO driver to driver model Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Clean header after moving stuff to KconfigMichal Simek
Moving stuff to Kconfig by script is keep some empty lines or comment in the file. Remove them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add support for zc1751 with DC cardsMichal Simek
Support ZynqMP zc1751 with DC cards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add defconfig for zcu102 revB boardMichal Simek
Support natively revB board. Till now support for revB was done via zcu102 defconfig where device-tree was changed to revB. This patch is adding direct defconfig for RevB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add support for ZCU102 platformMichal Simek
Add new board support. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Remove netdev.h from board fileMichal Simek
Including netdev.h is causing compilation warning: + int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int)); + ^ w+In file included from ../board/xilinx/zynqmp/zynqmp.c:9:0: w+../include/netdev.h:204:41: warning: ‘struct eth_device’ declared inside parameter list [enabled by default] w+../include/netdev.h:204:41: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] This patch removes it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Make DDR detection code work on 32bit systemMichal Simek
Define u64 types to be usable on 32bit system because of 64bit address and size cells and 32bit shifts in the code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Extend early malloc space to be able to run DM driversMichal Simek
DM drivers need more malloc space for early DM models allocation. Use 4k instead of 1k. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Do not setup DM_ETH/GPIO/MMC by default for all boardsMichal Simek
There are mini configurations which need to be fit to OCM that's why these options shouldn't be enabled by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add missing nand node for ep108Punnaiah Choudary Kalluri
Add missing nand node for ep108. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Added OOB timing settings in zynqmp-ep108.dtsAnurag Kumar Vulisha
This patch adds the sata port phy OOB timing values in the sata device-tree node. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Use 64bit size cell format for memory nodeMichal Simek
Enable option to support more then 4GB memories in single size block. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Fix DWC3 binding with the kernelMichal Simek
Use the same binding as is used in mainline Linux kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add serdes address space dp driverMichal Simek
For run time serdes adjustment. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Align register descriptionMichal Simek
Separate register space and put it on more lines. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: dp: Add default properties to zynqmp.dtsiHyun Kwon
Add some default properties to zynqmp.dtsi. Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Use correct addresses in node namesHyun Kwon
Reflect actual silicon addresses in DT node names. Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Align node address with parent node for dpdmaMichal Simek
Use right addresses for channel names Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add backward compatible string for uartMichal Simek
Mainline kernel has no r1p12 compatible string that's why console stops to work with the latest DTS files. Append generic compatible string. Keep in your mind that using this generic compatible string not all uart features will be available. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Fix coding style for pcieMichal Simek
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Extend pcie node to support legacy interruptsBharat Kumar Gogada
Modifying device tree node to support legacy interrupts. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add interrupt-controller property to gpio nodesMichal Simek
GPIO driver supports an input interrupt that's why gpio node itself can be labeled as interrupt controller. Reported-by: John Linn <linnj@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add ddrc node in dtsNaga Sureshkumar Relli
This patch adds ddrc memory controller node in dts. size mentioned in dts is 0x30000, because we need to access DDR_QOS INTR registers located at fd090208 from this driver. Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2024-12-24 02:16:51 +0000