summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-28hsdk: readme: Suggest getting pyelftools with pipAlexey Brodkin
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Suggested-by: Yunir Salimzyanov <yunir@synopsys.com>
2019-03-28ARC: AXS10x: drop NAND supportEugeniy Paltsev
On AXS10x boards we have non-standard NAND controller which was never really used a lot as there're other much more convenient [as they are standard & removable] persistent media like SD-card and USB mass storage. Moreover after recent changes we face with some NAND controller runtime issues. So instead of keeping support of yet another non-standard peripheral we're dropping its support for good. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-03-26Merge branch '2019-03-25-master-imports'Tom Rini
- Convert various SPI related options to Kconfig
2019-03-25Convert CONFIG_ENV_SPI_* to KconfigPatrick Delaunay
This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25Convert CONFIG_DEFAULT_SPI_* to KconfigPatrick Delaunay
This converts the following to Kconfig: CONFIG_DEFAULT_SPI_BUS CONFIG_DEFAULT_SPI_MODE Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25Convert CONFIG_SF_DEFAULT_* to KconfigPatrick Delaunay
This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25tqma6s_wru4_mmc: manage board_spi_cs_gpio correctlyPatrick Delaunay
Define the function board_spi_cs_gpio only when needed, only called in drivers/spi/mxc_spi.c. That avoid compilation issue for tqma6s_wru4_mmc_defconfig when CONFIG_SF_DEFAULT_BUS and CONFIG_SF_DEFAULT_CS are not defined (CMD_SF not defined) after migration in KConfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25exynos: replace CONFIG_ENV_SPI_BASE by CONFIG_SYS_SPI_BASEPatrick Delaunay
Replace CONFIG_ENV_SPI_BASE by the better CONFIG_SYS_SPI_BASE (it is not the location for environment but the location for U-Boot) and, as it is the only platform with use this define, remove it from whitelist. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25controlcenterdc: move some configuration in defconfig filePatrick Delaunay
Move some configurations in defconfig file - CONFIG_CMD_I2C - CONFIG_CMD_SPI This allow correct dependency handling in Kconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25bcm7445: move some configuration in defconfig filePatrick Delaunay
Move some configurations in defconfig file - CONFIG_DM_SPI (removed by syncing defconfigs ) - CONFIG_CMD_SF - CONFIG_CMD_SPI - CONFIG_CMD_SF_TEST This allow correct dependency handling in Kconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25Merge branch '2019-03-25-master-imports'Tom Rini
- 3 bugfixes: - mmc: Align MMC_TRACE with tiny printf - scripts/Makefile.extrawarn: Silence more DTC warnings - rsa: check that pointer checksum isn't NULL before using it
2019-03-25mmc: Align MMC_TRACE with tiny printfMarek Vasut
The tiny printf implementation only supports %x format specifier, it does not support %X . Since it makes little difference whether the debug output prints hex numbers in capitals or not, change it to %x and make the MMC_TRACE output work with tiny printf too. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Simon Glass <sjg@chromium.org>
2019-03-25scripts/Makefile.extrawarn: Silence more DTC warningsTom Rini
While our "extrawarns" logic has gotten out of sync with upstream Kbuild, for now lets start by bringing in the latest set of DTC_FLAGS from the Linux Kernel 5.0 to match their behavior in silencing warnings from dtc. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-25rsa: check that pointer checksum isn't NULL before using itPhilippe Reynes
The pointer checksum were used before checking that it isn't NULL. We move the code that use it after the check. Reported-by: Coverity (CID: 185835) Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-22Merge branch '2019-03-22-master-imports'Tom Rini
- Don't attempt to write to ext4 volumes with the metadata_csum feature we don't support - Correct how we build dtb files. - Fix regression on SPL_FIT with FIT_IMAGE_TINY - Minor TI platform fixes
2019-03-22fs: ext4: do not write on filesystem with metadata_csum featureSébastien Szymanski
U-Boot doesn't support metadata_csum feature. Writing to filesystem with metadata_csum feature makes the filesystem corrupted and unbootable by Linux: [ 2.527495] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 0 failed (52188!=0) [ 2.537421] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 1 failed (5262!=0) ... [ 2.653308] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 14 failed (42611!=0) [ 2.662179] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 15 failed (21527!=0) [ 2.687920] JBD2: journal checksum error [ 2.691982] EXT4-fs (mmcblk0p2): error loading journal [ 2.698292] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2): error -74 Don't write to filesystem with meatadata_csum feature to not corrupt the filesystem. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-03-22board: ti: Move fastboot functions out of TI_SECURE_DEVICE ifdefAndrew F. Davis
When these were moved from mach-omap2 to board files they got placed inside TI_SECURE_DEVICE ifdef block, they are not secure only, move them up and out. Fixes: 413b90777f8d ("ti: fastboot: Move weak overrides to board files") Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-03-22pci: Add comment to mention difference in DEVFN usage in U-Boot vs LinuxStefan Roese
This patch adds a comment to the header with the PCI_foo macros related to DEVFN to explain the difference in U-Boot vs Linux. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-22common: image-android-dt: Fix out-of-bounds accessEugeniu Rosca
Currently, 'dtimg' allows users to check indexes equal to dt_entry_count [1]. Forbid that [2]. [1] Behavior w/o the patch: => ext2load mmc 0:1 0x48000000 dtb.img 105695 bytes read in 5 ms (20.2 MiB/s) => dtimg dump 0x48000000 dt_table_header: magic = d7b7ab1e total_size = 105695 header_size = 32 dt_entry_size = 32 dt_entry_count = 2 dt_entries_offset = 32 page_size = 4096 version = 0 dt_table_entry[0]: dt_size = 105599 dt_offset = 96 id = 0b779520 rev = 00000000 custom[0] = 00000000 custom[1] = 00000000 custom[2] = 00000000 custom[3] = 00000000 (FDT)size = 105599 (FDT)compatible = shimafuji,kingfisher dt_table_entry[1]: dt_size = 105599 dt_offset = 96 id = 0b779530 rev = 00000000 custom[0] = 00000000 custom[1] = 00000000 custom[2] = 00000000 custom[3] = 00000000 (FDT)size = 105599 (FDT)compatible = shimafuji,kingfisher => dtimg size 0x48000000 0 z; print z z=19c7f => dtimg size 0x48000000 1 z; print z z=19c7f => dtimg size 0x48000000 2 z; print z z=d00dfeed => dtimg size 0x48000000 3 z Error: index > dt_entry_count (3 > 2) [2] Behavior with the patch: => dtimg size 0x48000000 0 z; print z z=19c7f => dtimg size 0x48000000 1 z; print z z=19c7f => dtimg size 0x48000000 2 z Error: index >= dt_entry_count (2 >= 2) Fixes: c04473345712 ("common: Add support for Android DT image") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-03-22configs: am335x_evm: Add CONFIG_BLKFaiz Abbas
With DM_MMC and DM_USB enabled, enable CONFIG_BLK. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-03-22Revert "Ensure device tree DTS is compiled"Masahiro Yamada
This reverts commit 27cb7300ffda7a3f1581f0f5a2d3bfe59b97ad67. I am not sure if I correctly understood the log of commit 27cb7300ffda ("Ensure device tree DTS is compiled"), but the code-diff looks like it was trying to solve the missed re-compilation when .dts was modified. Recently, commit 2737dfe096b6 ("kbuild: make arch-dtbs target PHONY") fixed the issue in a more correct and more complete way. Anyway, since the former commit, we see a clumsy log like this: make[2]: 'arch/sandbox/dts/sandbox.dtb' is up to date Another problem is, it created multiple paths to descend into arch/*/dts/, causing a race in parallel building. So, let's revert it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-22mips: add missing dtb-y to arch/mips/dts/MakefileMasahiro Yamada
Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. I am going to revert that commit, so device tree must be explicitly listed in Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-03-22powerpc: fix arch/powerpc/dts/MakefileMasahiro Yamada
Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. I am going to revert that commit, so wrong code must be fixed. CONFIG_MCR3000 is not defined anywhere. CONFIG_TARGET_MCR3000 is the correct one. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-22ARM: fix arch/arm/dts/MakefileMasahiro Yamada
Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. As a result, a lot of wrong code have been merged unnoticed. I am going to revert that commit, and lots of hidden issues have come to light: [1] Typos armada-3720-uDPU.dts, sun8i-a83t-tbs-a711.dts use the extension ".dts" instead of ".dtb" [2] DTB is associated to undefined CONFIG option For example, mx6sllevk_defconfig defines CONFIG_MX6SLL, but associates its device tree to CONFIG_MX6SL, which is undefined. [3] Lots of entries are missing Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Chris Packham <judge.packham@gmail.com> [trini: add imx6ul pico dtbs] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-22tools: fit_image: Add the loadable property to configsAbel Vesa
When running mkimage with "-f auto", the loadable property needs to be set in order to allow SPL FIT support to boot. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Tested-by: Fabio Estevam <festevam@gmail.com>
2019-03-22common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabledAbel Vesa
If FIT_IMAGE_TINY is enabled, spl_fit_image_get_os returns -ENOTSUPP. In this case, we should default to IH_OS_U_BOOT not to IH_OS_INVALID. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Tested-by: Fabio Estevam <festevam@gmail.com>
2019-03-22armv8: Disable exception vectors in SPL by defaultAlexander Graf
Commit 1416e2d2253 ("armv8: make SPL exception vectors optional") had a typo in it which effectively disabled exception handling in SPL code always. Since nobody complained, I guess we may as well disable exception handling in SPL always by default. So fix the bug to make the config option effective, but disable exception handling in SPL by default. This gets us to the same functionality as before by default, but with much less code included in the binary. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-03-22Makefile: Do not pass -E to mkimage when SPL has full fitImage supportMarek Vasut
When the SPL has full fitImage support, do not generate fitImage with external data. The full fitImage code assumes the entire fitImage is loaded in RAM, and the SPL uses fdt_totalsize() to determine the size of the whole fitImage, which can not work with external data. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
2019-03-22cmd: set CONFIG_SYS_HELP_CMD_WIDTH = 10Heinrich Schuchardt
CONFIG_SYS_HELP_CMD_WIDTH is used to format the output of help without any arguments. CONFIG_SYS_HELP_CMD_WIDTH = 8 is too narrow to fit all our commands. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-22configs: dra7xx_evm: Remove ENV_IS_IN_FATFaiz Abbas
With U-boot supporting environment in multiple places, enable only ENV_IS_IN_EMMC Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-03-22arm: lib: bootm: Push the Starting kernel print to the endKeerthy
Push the Starting kernel print to the end just before the dm_remove_devices call. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-21Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- ARM: socfpga: Build sfp image only for Gen5 and Arria10 devices
2019-03-21Merge tag 'efi-2019-04-rc5' of git://git.denx.de/u-boot-efiTom Rini
Pull request for UEFI system for v2019.04-rc5 A bunch of small fixes. The major ones being - avoid illegal memory access in efi_allocate_pool() on 32 bit systems - avoid endless loop in HII protocol
2019-03-21Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini
- i2c: i2c_cdns: Fix below warnings with checker tool
2019-03-21i2c: i2c_cdns: Fix below warnings with checker toolSiva Durga Prasad Paladugu
This patch fixes below warnings found with checker tool. The variable len in i2c_msg struct is of unsigned type and it is received as recv_count which is unsigned type but it is checked with < 0 which is always false, hence removed it. The local variable curr_recv_count is declared as signed type and compared aginst unsigned recv_count which is incorrect. This is fixed by declaring it as unsigned type. drivers/i2c/i2c-cdns.c: In function ‘cdns_i2c_read_data’: drivers/i2c/i2c-cdns.c:317:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if ((recv_count < 0)) ^ drivers/i2c/i2c-cdns.c:340:24: warning: comparison of integer expressions of different signedness: ‘u32’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare] updatetx = recv_count > curr_recv_count; ^ drivers/i2c/i2c-cdns.c:361:39: warning: comparison of integer expressions of different signedness: ‘u32’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare] while (readl(&regs->transfer_size) != Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-03-21ARM: socfpga: Build sfp image only for Gen5 and Arria10 devicesDalon Westergreen
The sfp file is only valid for Gen5 (Cyclone5 & Arria5) and Arria10 devices. The file should only be built for these devices. Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
2019-03-20efi_selftest: fix test_hii_string_get_string()Heinrich Schuchardt
The check testing the string result of get_string() returned the wrong result. The result was ignored. Use efi_st_strcmp_16_8() for the string comparison. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-20efi_loader: superfluous conversion in efi_file_open()Heinrich Schuchardt
printf("%ls", ..) expects u16 * as argument to print. There is not need for a conversion to wchar_t *. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-20efi_loader: remove superfluous check in efi_setup_loaded_image()Heinrich Schuchardt
It does not make any sense to check if a pointer is NULL if we have dereferenced it before. Reported-by: Coverity (CID 185827) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-20efi_loader: memory leak in efi_dump_single_var()Heinrich Schuchardt
A misplaced return statement lead to a memory leak in efi_dump_single_var(). Reported-by: Coverity (CID 185829) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-20efi_loader: missing return in efi_get_next_variable_name()Heinrich Schuchardt
Add a missing return statement in efi_get_next_variable_name(). Reported-by: Coverity (CID 185834) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-20efi_loader: endless loop in add_strings_package()Heinrich Schuchardt
Avoid an endless loop in add_strings_package(). Suggested-by: Takahiro Akashi <takahiro.akashi@linaro.org> Reported-by: Coverity (CID 185833) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-20efi_loader: correct parameter size in efi_allocate_poolHeinrich Schuchardt
efi_allocate_pages() expects a (uint64_t *) pointer to pass the address of the assigned memory. If we pass the address of a pointer here, an illegal memory access occurs on 32bit systems. Fixes: 282a06cbcae8 ("efi_loader: Expose U-Boot addresses in memory map for sandbox") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-19Merge git://git.denx.de/u-boot-marvellTom Rini
- Enable network interface on clearfog_gt_8k (Baruch) - Fix dreamplug boot by adding an spi0 alias to the DT (Chris) - Fix / enhance Marvell ddr3 setup / parameters (Chris) - Change CONFIG_SYS_MALLOC_F_LEN to 0x2000 on db-88f6820-amc (Chris) - Enable SPL_FLASH_BAR on db-88f6820-amc (Chris) - Use correct pcie controller name in Armada-38x dts files (Chris) - Disable d-cache on Kirkwood platforms as currently needed (Chris) - Add a more descriptive comment to pci_mvebu.c (Stefan) - Update Marvell maintainers entry (Stefan)
2019-03-19Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2019-03-19Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- Fastboot fixes
2019-03-19ARM: kirkwood: disable dcache for Kirkwood boardsChris Packham
Prior to commit 93b283d49f93 ("ARM: CPU: arm926ejs: Consolidate cache routines to common file") the kirkwood boards didn't have and dcache support. The network and usb drivers rely on this. Set CONFIG_SYS_DCACHE_OFF in the Kirkwood specific config.h. Reported-by: Leigh Brown <leigh@solinno.co.uk> Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-19ARM: mvebu: use correct name for pcie controllerChris Packham
When armada-385.dtsi was sync'd from Linux the name of the node describing the pcie controller was changed from pcie-controller to pcie. Some of the boards that include armada-385.dtsi were missed in the update retaining the old name. This updates the affected boards. Reported-by: Влад Мао <vlaomao@gmail.com> Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-19ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BARChris Packham
This board uses Micron N25Q256A SPI flash. Enable SPI_FLASH_BAR to allow us to access the whole chip. Signed-off-by: Chris Packham <judge.packham@gmail.com> Cc: Vignesh R <vigneshr@ti.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-19ARM: mvebu: set CONFIG_SYS_MALLOC_F_LEN to 0x2000Chris Packham
Set CONFIG_SYS_MALLOC_F_LEN to match the rest of the mvebu boards. The default of 0x400 is not enough when booting from SPI. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit (git 2.34.1) at 2024-12-26 02:22:45 +0000