summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-08spl: nor: introduce spl_nor_get_uboot_basePeng Fan
Introduce weak spl_nor_get_uboot_base, then platform have their own implementation. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com> Cc: Marek Vasut <marex@denx.de> Cc: Andreas Dannenberg <dannenberg@ti.com> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Michal Simek <michal.simek@xilinx.com>
2019-10-08spl: spi: introduce spl_spi_get_uboot_offsPeng Fan
Introduce a weak function spl_spi_get_uboot_offs, then platform could have their own implementation. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com> Cc: Marek Vasut <marex@denx.de> Cc: Andreas Dannenberg <dannenberg@ti.com> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Michal Simek <michal.simek@xilinx.com>
2019-10-08spl: mmc: introduce spl_mmc_get_uboot_raw_sectorPeng Fan
Introduce a weak function spl_mmc_get_uboot_raw_sector, then platform could have their own implementation. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com> Cc: Marek Vasut <marex@denx.de> Cc: Andreas Dannenberg <dannenberg@ti.com> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Michal Simek <michal.simek@xilinx.com>
2019-10-08imx: Add i.MX8MM EVK board support.Peng Fan
Add board and SoC dts Add ddr training code support SD/MMC/GPIO/PINCTRL/UART Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08arm: dts: add i.MX8MM pin funcPeng Fan
Import i.MX8MM pin func from Linux Kernel, commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08arm: dts: import i.MX8MM dtsiPeng Fan
Import i.MX8MM dtsi from Linux Kernel, commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: soc: probe clock device in arch_cpu_init_dmPeng Fan
Because we need to get cpu freq in print_cpuinfo at very early stage, so we need to make sure the ccm be probed. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: mmc_env: update runtime SD/MMC boot env devicePeng Fan
When DM_MMC enabled, the USDHC index in U-Boot is the USDHC port. To directly return devno, we could avoid add board specific code. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: add clk support for i.MX8MMPeng Fan
Introduce clk implementation for i.MX8MM, including pll configuration, ccm configuration. Mostly will be done clk dm driver, but such as DRAM part, we still use non clk dm driver, because we have limited sram. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: restructure clock.hPeng Fan
i.MX8MQ and i.MX8MM use different analog pll design, but they share same ccm design. Add clock_imx8mq.h for i.MX8MQ keep common part in clock.h Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: rename clock to clock_imx8mqPeng Fan
i.MX8MQ and i.MX8MM has totally different pll design, so rename clock to clock_imx8mq. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: restrict reset_cpuPeng Fan
Make reset_cpu only visible when CONFIG_SYSRESET not defined or CONFIG_SPL_BUILD. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: soc: enable SCTR clock before timer initPeng Fan
To i.MX8MM SCTR clock is disabled by ROM, so before timer init need to enable it. To i.MX8MQ, it does not hurt the clock is enabled again. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: Configure trustzone region 0 for non-secure accessYe Li
Set trustzone region 0 to allow both non-secure and secure access when trust zone is enabled. We found USB controller fails to access DDR if the default region 0 is secure access only. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: set BYPASS ID SWAP to avoid AXI bus errorsPeng Fan
set the BYPASS ID SWAP bit (GPR10 bit 1) in order for GPU not to generated AXI bus errors with TZC380 enabled. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: Fix MMU table issue for OPTEE memoryPeng Fan
When running with OPTEE, the MMU table in u-boot does not remove the OPTEE memory from its settings. So ARM speculative prefetch in u-boot may access that OPTEE memory. Due to trust zone is enabled by OPTEE and that memory is set to secure access, then the speculative prefetch will fail and cause various memory issue in u-boot. The fail address register and int_status register in trustzone has logged that speculative access from u-boot. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: add i.MX8MM PE propertyPeng Fan
i.MX8MM does not have LVTTL, it has a PE property Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: add pin header for i.MX8MMPeng Fan
Add pin header file for i.MX8MM To IMX8MM_PAD_NAND_WE_B_USDHC3_CLK, IOMUX_CONFIG_SION needs to be selected. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: add get_cpu_rev support for i.MX8MMPeng Fan
There are several variants based on i.MX8MM, add the support in get_cpu_rev Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: update imx-regs for i.MX8MMPeng Fan
i.MX8MM has similar architecture with i.MX8MQ, but it has totally different PLL design and register layout change. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: imx-regs: drop unused register definitionsPeng Fan
Drop unused register definitions and structures for i.MX8MQ Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: spl: add spl_board_boot_device for i.MX8MMPeng Fan
Differnet board has different controller used, it is hard to use one layout for them all. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: add i.MX8MM cpu typePeng Fan
Add i.MX8MM cpu type and related helper functions Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: imx8mm: add clock bindings headerPeng Fan
Import clock bindings header file from Linux 5.3.0-rc2 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: add IMX8MM kconfig entryPeng Fan
Add IMX8MM kconfig entry Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: add IMX8MQ kconfig entryPeng Fan
Add IMX8MQ kconfig entry, preparing support IMX8MM Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8m: add image cfg for i.MX8MM lpddr4Peng Fan
There is no HDMI on i.MX8MM, so we need to remove HDMI entry, then we could not reuse imximage.cfg, so create a new one. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08ddr: imx8m: fix ddr firmware location when enable SPL OFPeng Fan
With CONFIG_SPL_OF_CONTROL, the device tree will be padded to end of the u-boot-spl-nodtb.bin, however we also put the ddr firmware file to this location, so need to adapt the code with SPL OF and align to 4 bytes to ease copy firmware. Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08tools: imx8m_image: align spl bin image sizePeng Fan
The loader for the DDR firmware in drivers/ddr/imx/imx8m/helper.c uses a 4-byte-aligned address to load the firmware. In cases where OF is enabled in SPL the dtb will be appended to the SPL binary and can result in a binary that is not aligned correctly. If OF is not enabled in SPL, `_end` is already aligned correctly, but this patch does not hurt. To ensure the correct alignment we use dd to create a temporary file u-boot-spl-pad.bin with the correct padding. Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: mkimage_fit_atf: Fix FIT image for correct boot orderFrieder Schrempf
Fix the FIT image metadata for i.MX8 to result in the intended boot order (SPL -> ATF -> U-Boot). Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08Kconfig: Set default BUILD_TARGET for ARCH_MX6 with SPLStefan Roese
Use BUILD_TARGET to automatically build "u-boot-with-spl.imx" on MX6 targets with SPL. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
2019-10-08ARM: imx: arch/arm/mach-imx/spl_qspi.cfgStefan Roese
Similar to "spl_sd.cfg", this patch introduces "spl_qspi.cfg" so that all i.MX6 based boards can use it, when they use SPL and QSPI boot mode. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
2019-10-08ARM: imx: Add QSPI boot mode for i.MX6UL/ULLStefan Roese
This patch adds the missing boot mode detection for QSPI boot on i.MX6UL/ULL. Without it, booting with SPL from QSPI NOR does not work. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
2019-10-08imx: mx6ul_14x14_evk: fix link issueAnatolij Gustschin
Since recent splash changes common code for splashscreen logo should be used instead of adding duplicated code under board directories. mx6ul_9x9_evk and mx6ul_14x14_evk configurations used old board specific logo code and do not link, fix them. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: Kconfig: Reduce default CONFIG_CSF_SIZEBreno Matheus Lima
The default CSF_SIZE defined in Kconfig is too high and SPL cannot fit into the OCRAM in certain cases. The CSF cannot achieve 0x2000 length when using RSA 4K key which is the largest key size supported by HABv4. According to AN12056 "Encrypted Boot on HABv4 and CAAM Enabled Devices" it's recommended to pad CSF binary to 0x2000 and append DEK blob to deploy encrypted boot images. As the maximum DEK blob size is 0x58 we can reduce CSF_SIZE to 0x2060 which should cover both CSF and DEK blob length. Update default_image.c and image.c to align with this change and avoid a U-Boot proper authentication failure in HAB closed devices: Authenticate image from DDR location 0x877fffc0... bad magic magic=0x32 length=0x6131 version=0x38 bad length magic=0x32 length=0x6131 version=0x38 bad version magic=0x32 length=0x6131 version=0x38 spl: ERROR: image authentication fail Fixes: 96d27fb218 (Revert "habv4: tools: Avoid hardcoded CSF size for SPL targets") Reported-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Breno Lima <breno.lima@nxp.com>
2019-10-08imx: enable the reset controller on the i.MX8MQ EVKPatrick Wildt
This patch makes sure that the reset controller driver is compiled for the i.MX8MQ EVK. Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08imx: add the i.MX8M reset controller nodePatrick Wildt
This patch adds the reset controller node to the i.MX8MQ SoC device tree. Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08imx: add support for i.MX7/i.MX8MQ reset controllerPatrick Wildt
Add support for the reset controller that's used on the i.MX7D and i.MX8MQ. This will be needed to be able to assert the PCIe reset pins. Bindings taken from Linux, driver implementation mostly taken from Linux and adjusted to U-Boot infrastructure. Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08imx: add support for i.MX8MQ power domain controllerPatrick Wildt
Add support for the power domain controller that's used on the i.MX8MQ. This will be needed to be able to power on the PCIe controller. Bindings taken from Linux, driver implementation taken from the i.MX8 power domain controller and adjusted for the i.MX8M SoC. Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08ARM: dts: pcl063: add usdhc reset pin of eMMCParthiban Nallathambi
pcl063 phycore SoM with eMMC also got usdhc reset pin, add reset pin to pinmux. Signed-off-by: Parthiban Nallathambi <pn@denx.de>
2019-10-08imx: mxs: Fix location for the elftosb toolFabio Estevam
The Denx FTP location is no longer reachable. Switch to the Timesys repository instead. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-10-08mx28evk: README: Fix location for the generic mxs READMEFabio Estevam
doc/README.mxs no longer exists. It has been renamed doc/imx/common/mxs.txt, so fix the mx28evk README accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-10-08imx: wandboard: convert FEC support to DM_ETHAnatolij Gustschin
Remove CONFIG_DM_ETH conversion warning to avoid board removal. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-10-08spi: Add support for SPL_OF_PLATDATA to mxs_gpio.c driverLukasz Majewski
After this patch the mxs_gpio.c DM/DTS driver can be used at early SPL to read states of gpio pins (and for example alter the boot flow). It was necessary to adjust its name to 'fsl_imx_2{38}_gpio' to match requirements for SPL_OF_PLATDATA usage. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08mmc: Replace printf with debug call for timeouts in the i.MX28 mxs driverLukasz Majewski
This change replaces printf() with debug() for the notification about commands timeouts. This is done on purpose (also other drivers use such approach - dw_mmc.c, mvebu_mmc.c), as the mmc core code (mmc.c) uses timeouts to assess if one is using sd card or eMMC device. In such situation timeout is a some kind of a "normal" behavior and there shall not be any output to the console. There is no impact on boot time for boards using this driver (even in SPL) when two extra timeouts are returned (no SD card present, only eMMC available). Boot time tested with grabserial: sudo grabserial -b 115200 -d /dev/ttyUSB1 -e 30 -t -m "^U-Boot SPL*" Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08mmc: Convert mxsmmc eMMC driver for i.MX2{38} to DM/DTSLukasz Majewski
This patch converts the mxsmmc driver to support DM/DTS. Moreover, it is also possible to use it in early SPL with SPL_OF_PLATDATA enabled. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08spi: Add support for SPL_OF_PLATDATA to mxs_spi.c driverLukasz Majewski
After this patch the mxs_spi.c DM/DTS driver can be used at early SPL to read payload from SPI-NOR memories. It was necessary to adjust its name to 'fsl_imx_2{38}_spi' to match requirements for SPL_OF_PLATDATA usage. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08spi: fix: Call mxs_reset_block() during DM/DTS probeLukasz Majewski
Without this change the DM/DTS version of mxs_spi driver doesn't reset the SPI IP block in probe. As a result this driver (when used solely on U-Boot proper) relies on reset performed by mxs spi driver in SPL. In the use case where eMMC is used in SPL as a boot primary device, the mxs_reset_block() is not called at all and DM/DTS aware SPI driver in U-Boot proper is malfunctioning. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08spl: Init proper struct driver member (platdata_auto_alloc_size) for mxs_spiLukasz Majewski
This change initializes proper member of struct driver - platdata_auto_alloc_size instead of priv_auto_alloc_size, which is setup twice. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08dts: imx28: Remove #include "imx28.dtsi" from imx28-u-boot.dtsi fileLukasz Majewski
After this change it is possible to use imx28-<board>-u-boot.dtsi with the imx28-u-boot.dtsi explicitly included without breaking setup from imx28-<board>.dts file. The problem is that the imx28.dtsi included in a wrong place overrides the changes made in imx28-<board>.dts. As a result some devices are "disabled" in the final DTB. Signed-off-by: Lukasz Majewski <lukma@denx.de>
generated by cgit (git 2.34.1) at 2024-12-26 19:27:47 +0000