summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-18Fix some checkpatch warnings in calls to debug()Simon Glass
Fix up some incorrect code style in calls to functions in the log.h header, mostly debug(). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop image.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop bootstage.h from common headerSimon Glass
Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18bootstage: Use BOOTSTAGE instead of BOOTSTATESimon Glass
Some of the enum members are wrong. Fix them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop part.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18part: Drop disk_partition_t typedefSimon Glass
We should not be using typedefs and these make it harder to use forward declarations (to reduce header file inclusions). Drop the typedef. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18arm: Don't include common.h in header filesSimon Glass
It is bad practice to include common.h in other header files since it can bring in any number of superfluous definitions. It implies that some C files don't include it and thus may be missing CONFIG options that are set up by that file. The C files should include these themselves. Update some header files in arch/arm to drop this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop flash.h from common headerSimon Glass
Move this uncommon header out of the common header. Fix up some style problems in flash.h while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18flash: Tidy up coding style for flash functionsSimon Glass
Some functions use the wrong code style and generate checkpatch errors. Fix these. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop uuid.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Merge tag 'efi-2020-07-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc3 A series of patches introduces the possibility to manage UEFI variables via an OP-TEE module. CONFIG_EFI_MM_COMM_TEE enables this. If this option is not specified the U-Boot behavior remains unchanged. A defconfig is provided for compile testing (lx2160ardb_tfa_stmm_defconfig). An incorrect UEFI memory allocation for fsl-layerscape is fixed
2020-05-17dts: nxp2160ardb: add op-tee nodeIlias Apalodimas
A defconfig is added on lx2160ardb which allows UEFI variable management via OP-TEE. Enable the the node in the relevant DTS file. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-05-17configs: lx2160a: Add default config for lx2160a using StMM in OP-TEEIlias Apalodimas
Previous patches allow UEFI secure variables to be stored in an RPMB device using OPTEE. Add a config for the lx2160a hardware so the feature gets at least compiled. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Remove superfluous differences to lx2160ardb_tfa_defconfig. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17doc: uefi.rst: Add OP-TEE variable storage config optionsIlias Apalodimas
If OP-TEE is compiled with an EDK2 application running in secure world it can process and store UEFI variables in an RPMB. Add documentation for the config options enabling this. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17MAINTAINERS: Add maintainer for EFI variables via OP-TEEIlias Apalodimas
Add myself as maintainer for the OP-TEE related UEFI variable storage. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17cmd: efidebug: Add support for querying UEFI variable storageIlias Apalodimas
With the previous patches that use OP-TEE and StandAloneMM for UEFI variable storage we've added functionality for efi_query_variable_info. So let's add the relevant command to efidebug and retrieve information about the container used to store UEFI variables Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-05-17efi_loader: Implement EFI variable handling via OP-TEEIlias Apalodimas
In OP-TEE we can run EDK2's StandAloneMM on a secure partition. StandAloneMM is responsible for the UEFI variable support. In combination with OP-TEE and it's U-Boot supplicant, variables are authenticated/validated in secure world and stored on an RPMB partition. So let's add a new config option in U-Boot implementing the necessary calls to OP-TEE for the variable management. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Pipat Methavanitpong <pipat1010@gmail.com> Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17efi_loader: Add headers for EDK2 StandAloneMM communicationSughosh Ganu
In Arm devices OP-TEE has the ability to run StandAloneMM (from EDK2) in a separate partition and handle UEFI variables. A following patch introduces this functionality. Add the headers needed for OP-TEE <--> StandAloneMM communication Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17efi_loader: round the memory area in efi_add_memory_map()Michael Walle
Virtually all callers of this function do the rounding on their own. Some do it right, some don't. Instead of doing this in each caller, do the rounding in efi_add_memory_map(). Change the size parameter to bytes instead of pages and remove aligning and size calculation in all callers. There is no more need to make the original efi_add_memory_map() (which takes pages as size) available outside the module. Thus rename it to efi_add_memory_map_pg() and make it static to prevent further misuse outside the module. Signed-off-by: Michael Walle <michael@walle.cc> Add missing comma in sunxi_display.c. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-15Merge branch '2020-05-15-kconfig-migrations'Tom Rini
- Convert CONFIG_DELAY_ENVIRONMENT to Kconfig and update initr_pci to be Kconfig'd.
2020-05-15qemu-x86*_defconfig: Enable CONFIG_PCI_INIT_ROvidiu Panait
Enable CONFIG_PCI_INIT_R for qemux86 and qemux86-64 pci enumeration during boot in order to eliminate the custom preboot commands in include/configs/qemu-x86.h. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-05-15qemu_arm_defconfig: Enable CONFIG_PCI_INIT_ROvidiu Panait
Replace the "pci enum" preboot sequence with CONFIG_PCI_INIT_R=y. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-05-15qemu_arm64_defconfig: Enable CONFIG_PCI_INIT_ROvidiu Panait
Replace the "pci enum" preboot sequence with CONFIG_PCI_INIT_R=y. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-05-15board_r: Introduce CONFIG_PCI_INIT_R Kconfig optionOvidiu Panait
With CONFIG_DM_PCI enabled, PCI buses are not enumerated at boot, as they are without that config option enabled. However, there are cases such as DM PCI-based Ethernet devices that need the PCI bus enumerated so that they can be discovered by their drivers. Currently, to solve this, some boards enumerate the pci bus using "pci enum" preboot command, while others do it manually in board files (in board_init/board_late_init/etc. functions). In order to possibly make the pci enumeration process uniform across all boards, introduce CONFIG_PCI_INIT_R Kconfig option. This change also preserves the current behavior in the !DM_PCI case (pci_init is run unconditionally at boot). Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-05-15board_r: env: Use IS_ENABLED() instead of #ifdefsOvidiu Panait
Use IS_ENABLED() instead of #ifdef in should_load_env and initr_env functions. No functional change intended. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-05-15env: Convert CONFIG_DELAY_ENVIRONMENT to KconfigOvidiu Panait
This converts ad-hoc CONFIG_DELAY_ENVIRONMENT to Kconfig. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-05-15configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-15Merge branch '2020-05-15-misc-bugfixes'Tom Rini
- A number of symbol name consistency updates - JFFS2 bugfix - Use /* fallthrough */ for now to help at least gcc know when we're intentionally not 'break;'ing in a switch statement, we'll adopt fallthrough; later on. - Assorted other fixes
2020-05-15lib: rsa: avoid overriding the object name when already specifiedJan Luebbe
If "object=" is specified in "keydir" when using the pkcs11 engine do not append another "object=<key-name-hint>". This makes it possible to use object names other than the key name hint. These two string identifiers are not necessarily equal. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Bastian Krause <bst@pengutronix.de> Reviewed-by: George McCollister <george.mccollister@gmail.com>
2020-05-15MAINTAINERS: POWERPC MPC8XX: Update email addressChristophe Leroy
Our email addresses have changed from @c-s.fr to @csgroup.eu Update entry in MAINTAINERS Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2020-05-15tools: ftdgrep: use /* fallthrough */ as neededHeinrich Schuchardt
GCC recognizes /* fallthrough */ if -Wimplicit-fallthrough=3 is enabled. Let's use it consistently. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-15tools: mkimage: use /* fallthrough */ as neededHeinrich Schuchardt
GCC recognizes /* fallthrough */ if -Wimplicit-fallthrough=3 is enabled. Let's use it consistently. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-15common/board_f: avoid -Wtype-limits warningHeinrich Schuchardt
CONFIG_SYS_SDRAM_BASE maybe zero. Avoid a build warning when compiling with -Wtype-limits. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-15spl: Always define preloader_console_initSamuel Holland
A large number of boards call preloader_console_init unconditionally. Currently, they fail to build with CONFIG_SPL_SERIAL=n, because the function is undefined in that case. To fix the build, always define preloader_console_init, but make it no-op when CONFIG_SPL_SERIAL=n. For the few boards that did check for CONFIG_SPL_SERIAL before calling preloader_console_init, remove the checks, since the function can now be called unconditionally. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-05-15lib: rsa: Also check for presence of r-squared propertyJan Kiszka
Better than crashing later if it is missing. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2020-05-15Makefile: add file 'defconfig' to clean targetHeinrich Schuchardt
File 'defconfig' is a build artifact of 'make savedefconfig'. Remove it when cleaning. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-15JFFS2: Add useful fields into listsPetr Borsodi
The inode list uses version and ino, the dirent list uses version and pino. This information is collected during scanning, reducing accesses to flash and significantly speeding up ls and read. Signed-off-by: Petr Borsodi <petr.borsodi@i.cz>
2020-05-15JFFS2: Process obsolete nodes as well as accurate onesPetr Borsodi
Obsolete nodes (ie. without the JFFS2_NODE_ACCURATE flag) were ignored because they had seemingly invalid crc. This could lead to finding the phantom node header in obsolete node data. Signed-off-by: Petr Borsodi <petr.borsodi@i.cz>
2020-05-15drivers/reset/Kconfig: fix typoTrevor Woerner
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15rename symbol: CONFIG_STM32 -> CONFIG_ARCH_STM32Trevor Woerner
Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRATrevor Woerner
Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOODTrevor Woerner
Have this symbol follow the pattern of all other such symbols. This patch also removes a TODO from the code. Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15arm: orion5x: finish moving SoC to mach-orion5xTrevor Woerner
The SPL linker script had been left in arch/$(ARCH)/cpu/$(CPU)/$(SOC); therefore move it to the already-established arch/$(ARCH)/mach-$(SOC) location. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15rename symbol: CONFIG_ORION5X -> CONFIG_ARCH_ORION5XTrevor Woerner
Have this symbol follow the pattern of all other such symbols. This patch removes a TODO from the code. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15arch/arm/Makefile: sort machine namesTrevor Woerner
The comment immediately above the block of machine directory names implored users to keep the macro names sorted, but, alas, this is no longer the case. Put the list of machine directory names back in alphanumerical order by CONFIG_* macro name, as the comment asks. Sort all the symbols as though they all followed the convention of having the string "ARCH_" in the middle of their definitions. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15arm: lpc32xx: move SoC to mach-lpc32xxTrevor Woerner
Following the example of most other SoCs in arch/$(ARCH)/cpu/$(CPU)/$(SOC) move the lpc32xx code from arch/arm/cpu/arm926ejs/lpc32xx to arch/arm/mach-lpc32xx. Following the checklist from commit 01f14456306c ("ARM: prepare for moving SoC sources into mach-*"): [1] move files from arch/arm/cpu/arm926ejs/lpc32xx to arch/arm/mach-lpx32xx [2] add machine entry to arch/arm/Makefile [3] remove "obj-y += ..." from arch/arm/cpu/arm926ejs/Makefile [4] fix the Kconfig file path in arch/arm/Kconfig [5] (no MAINTAINERS update) Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15rsa: don't use malloc.h in rsa-sign.cJonathan Gray
stdlib.h is the header for malloc since at least c89/c90. There is no system malloc.h on OpenBSD and trying to use malloc.h here falls back to the U-Boot malloc.h breaking the build of qemu_arm64. Fixes: 336d4615f8 ("dm: core: Create a new header file for 'compat' features") Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
generated by cgit (git 2.34.1) at 2024-12-23 20:28:38 +0000